help
Support for Intel's IXP2400/2800 (XScale) family of processors.
+config ARCH_IXP23XX
+ bool "IXP23XX-based"
+ select PCI
+ help
+ Support for Intel's IXP23xx (XScale) family of processors.
+
config ARCH_L7200
bool "LinkUp-L7200"
select FIQ
source "arch/arm/mach-ixp2000/Kconfig"
+source "arch/arm/mach-ixp23xx/Kconfig"
+
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
+ || ARCH_IXP23XX
source "drivers/ide/Kconfig"
endif
machine-$(CONFIG_ARCH_IOP3XX) := iop3xx
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_IXP2000) := ixp2000
+ machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
incdir-$(CONFIG_ARCH_OMAP) := omap
--- /dev/null
+if ARCH_IXP23XX
+
+config ARCH_SUPPORTS_BIG_ENDIAN
+ bool
+ default y
+
+menu "Intel IXP23xx Implementation Options"
+
+comment "IXP23xx Platforms"
+
+config MACH_ESPRESSO
+ bool "Support IP Fabrics Double Espresso platform"
+ help
+
+config MACH_IXDP2351
+ bool "Support Intel IXDP2351 platform"
+ help
+
+config MACH_ROADRUNNER
+ bool "Support ADI RoadRunner platform"
+ help
+
+endmenu
+
+endif
--- /dev/null
+#
+# Makefile for the linux kernel.
+#
+obj-y := core.o pci.o
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_MACH_ESPRESSO) += espresso.o
+obj-$(CONFIG_MACH_IXDP2351) += ixdp2351.o
+obj-$(CONFIG_MACH_ROADRUNNER) += roadrunner.o
--- /dev/null
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
--- /dev/null
+/*
+ * arch/arm/mach-ixp23xx/core.c
+ *
+ * Core routines for IXP23xx chips
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2004 (c) Intel Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+
+
+/*************************************************************************
+ * Chip specific mappings shared by all IXP23xx systems
+ *************************************************************************/
+static struct map_desc ixp23xx_io_desc[] __initdata = {
+ { /* XSI-CPP CSRs */
+ .virtual = IXP23XX_XSI2CPP_CSR_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
+ .length = IXP23XX_XSI2CPP_CSR_SIZE,
+ .type = MT_DEVICE,
+ }, { /* Expansion Bus Config */
+ .virtual = IXP23XX_EXP_CFG_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
+ .length = IXP23XX_EXP_CFG_SIZE,
+ .type = MT_DEVICE,
+ }, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
+ .virtual = IXP23XX_PERIPHERAL_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
+ .length = IXP23XX_PERIPHERAL_SIZE,
+ .type = MT_DEVICE,
+ }, { /* CAP CSRs */
+ .virtual = IXP23XX_CAP_CSR_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
+ .length = IXP23XX_CAP_CSR_SIZE,
+ .type = MT_DEVICE,
+ }, { /* MSF CSRs */
+ .virtual = IXP23XX_MSF_CSR_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
+ .length = IXP23XX_MSF_CSR_SIZE,
+ .type = MT_DEVICE,
+ }, { /* PCI I/O Space */
+ .virtual = IXP23XX_PCI_IO_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
+ .length = IXP23XX_PCI_IO_SIZE,
+ .type = MT_DEVICE,
+ }, { /* PCI Config Space */
+ .virtual = IXP23XX_PCI_CFG_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
+ .length = IXP23XX_PCI_CFG_SIZE,
+ .type = MT_DEVICE,
+ }, { /* PCI local CFG CSRs */
+ .virtual = IXP23XX_PCI_CREG_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
+ .length = IXP23XX_PCI_CREG_SIZE,
+ .type = MT_DEVICE,
+ }, { /* PCI MEM Space */
+ .virtual = IXP23XX_PCI_MEM_VIRT,
+ .pfn = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
+ .length = IXP23XX_PCI_MEM_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
+void __init ixp23xx_map_io(void)
+{
+ iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
+}
+
+
+/***************************************************************************
+ * IXP23xx Interrupt Handling
+ ***************************************************************************/
+enum ixp23xx_irq_type {
+ IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
+};
+
+static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
+
+static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
+{
+ int line = irq - IRQ_IXP23XX_GPIO6 + 6;
+ u32 int_style;
+ enum ixp23xx_irq_type irq_type;
+ volatile u32 *int_reg;
+
+ /*
+ * Only GPIOs 6-15 are wired to interrupts on IXP23xx
+ */
+ if (line < 6 || line > 15)
+ return -EINVAL;
+
+ switch (type) {
+ case IRQT_BOTHEDGE:
+ int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
+ irq_type = IXP23XX_IRQ_EDGE;
+ break;
+ case IRQT_RISING:
+ int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
+ irq_type = IXP23XX_IRQ_EDGE;
+ break;
+ case IRQT_FALLING:
+ int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
+ irq_type = IXP23XX_IRQ_EDGE;
+ break;
+ case IRQT_HIGH:
+ int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
+ irq_type = IXP23XX_IRQ_LEVEL;
+ break;
+ case IRQT_LOW:
+ int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
+ irq_type = IXP23XX_IRQ_LEVEL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ixp23xx_config_irq(irq, irq_type);
+
+ if (line >= 8) { /* pins 8-15 */
+ line -= 8;
+ int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
+ } else { /* pins 0-7 */
+ int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
+ }
+
+ /*
+ * Clear pending interrupts
+ */
+ *IXP23XX_GPIO_GPISR = (1 << line);
+
+ /* Clear the style for the appropriate pin */
+ *int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
+ (line * IXP23XX_GPIO_STYLE_SIZE));
+
+ /* Set the new style */
+ *int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
+
+ return 0;
+}
+
+static void ixp23xx_irq_mask(unsigned int irq)
+{
+ volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+
+ *intr_reg &= ~(1 << (irq % 32));
+}
+
+static void ixp23xx_irq_ack(unsigned int irq)
+{
+ int line = irq - IRQ_IXP23XX_GPIO6 + 6;
+
+ if ((line < 6) || (line > 15))
+ return;
+
+ *IXP23XX_GPIO_GPISR = (1 << line);
+}
+
+/*
+ * Level triggered interrupts on GPIO lines can only be cleared when the
+ * interrupt condition disappears.
+ */
+static void ixp23xx_irq_level_unmask(unsigned int irq)
+{
+ volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+
+ ixp23xx_irq_ack(irq);
+
+ *intr_reg |= (1 << (irq % 32));
+}
+
+static void ixp23xx_irq_edge_unmask(unsigned int irq)
+{
+ volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+
+ *intr_reg |= (1 << (irq % 32));
+}
+
+static struct irqchip ixp23xx_irq_level_chip = {
+ .ack = ixp23xx_irq_mask,
+ .mask = ixp23xx_irq_mask,
+ .unmask = ixp23xx_irq_level_unmask,
+ .set_type = ixp23xx_irq_set_type
+};
+
+static struct irqchip ixp23xx_irq_edge_chip = {
+ .ack = ixp23xx_irq_ack,
+ .mask = ixp23xx_irq_mask,
+ .unmask = ixp23xx_irq_edge_unmask,
+ .set_type = ixp23xx_irq_set_type
+};
+
+static void ixp23xx_pci_irq_mask(unsigned int irq)
+{
+ *IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
+}
+
+static void ixp23xx_pci_irq_unmask(unsigned int irq)
+{
+ *IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
+}
+
+/*
+ * TODO: Should this just be done at ASM level?
+ */
+static void pci_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+ u32 pci_interrupt;
+ unsigned int irqno;
+ struct irqdesc *int_desc;
+
+ pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
+
+ desc->chip->ack(irq);
+
+ /* See which PCI_INTA, or PCI_INTB interrupted */
+ if (pci_interrupt & (1 << 26)) {
+ irqno = IRQ_IXP23XX_INTB;
+ } else if (pci_interrupt & (1 << 27)) {
+ irqno = IRQ_IXP23XX_INTA;
+ } else {
+ BUG();
+ }
+
+ int_desc = irq_desc + irqno;
+ int_desc->handle(irqno, int_desc, regs);
+
+ desc->chip->unmask(irq);
+}
+
+static struct irqchip ixp23xx_pci_irq_chip = {
+ .ack = ixp23xx_pci_irq_mask,
+ .mask = ixp23xx_pci_irq_mask,
+ .unmask = ixp23xx_pci_irq_unmask
+};
+
+static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
+{
+ switch (type) {
+ case IXP23XX_IRQ_LEVEL:
+ set_irq_chip(irq, &ixp23xx_irq_level_chip);
+ set_irq_handler(irq, do_level_IRQ);
+ break;
+ case IXP23XX_IRQ_EDGE:
+ set_irq_chip(irq, &ixp23xx_irq_edge_chip);
+ set_irq_handler(irq, do_edge_IRQ);
+ break;
+ }
+ set_irq_flags(irq, IRQF_VALID);
+}
+
+void __init ixp23xx_init_irq(void)
+{
+ int irq;
+
+ /* Route everything to IRQ */
+ *IXP23XX_INTR_SEL1 = 0x0;
+ *IXP23XX_INTR_SEL2 = 0x0;
+ *IXP23XX_INTR_SEL3 = 0x0;
+ *IXP23XX_INTR_SEL4 = 0x0;
+
+ /* Mask all sources */
+ *IXP23XX_INTR_EN1 = 0x0;
+ *IXP23XX_INTR_EN2 = 0x0;
+ *IXP23XX_INTR_EN3 = 0x0;
+ *IXP23XX_INTR_EN4 = 0x0;
+
+ /*
+ * Configure all IRQs for level-sensitive operation
+ */
+ for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
+ ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
+ }
+
+ for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
+ set_irq_chip(irq, &ixp23xx_pci_irq_chip);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
+}
+
+
+/*************************************************************************
+ * Timer-tick functions for IXP23xx
+ *************************************************************************/
+#define CLOCK_TICKS_PER_USEC CLOCK_TICK_RATE / (USEC_PER_SEC)
+
+static unsigned long next_jiffy_time;
+
+static unsigned long
+ixp23xx_gettimeoffset(void)
+{
+ unsigned long elapsed;
+
+ elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
+
+ return elapsed / CLOCK_TICKS_PER_USEC;
+}
+
+static irqreturn_t
+ixp23xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ /* Clear Pending Interrupt by writing '1' to it */
+ *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
+ while ((*IXP23XX_TIMER_CONT - next_jiffy_time) > LATCH) {
+ timer_tick(regs);
+ next_jiffy_time += LATCH;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction ixp23xx_timer_irq = {
+ .name = "IXP23xx Timer Tick",
+ .handler = ixp23xx_timer_interrupt,
+ .flags = SA_INTERRUPT | SA_TIMER,
+};
+
+void __init ixp23xx_init_timer(void)
+{
+ /* Clear Pending Interrupt by writing '1' to it */
+ *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
+
+ /* Setup the Timer counter value */
+ *IXP23XX_TIMER1_RELOAD =
+ (LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
+
+ *IXP23XX_TIMER_CONT = 0;
+ next_jiffy_time = LATCH;
+
+ /* Connect the interrupt handler and enable the interrupt */
+ setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
+}
+
+struct sys_timer ixp23xx_timer = {
+ .init = ixp23xx_init_timer,
+ .offset = ixp23xx_gettimeoffset,
+};
+
+
+/*************************************************************************
+ * IXP23xx Platform Initializaion
+ *************************************************************************/
+static struct resource ixp23xx_uart_resources[] = {
+ {
+ .start = IXP23XX_UART1_PHYS,
+ .end = IXP23XX_UART1_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM
+ }, {
+ .start = IXP23XX_UART2_PHYS,
+ .end = IXP23XX_UART2_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct plat_serial8250_port ixp23xx_uart_data[] = {
+ {
+ .mapbase = IXP23XX_UART1_PHYS,
+ .membase = (char *)(IXP23XX_UART1_VIRT + 3),
+ .irq = IRQ_IXP23XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP23XX_UART_XTAL,
+ }, {
+ .mapbase = IXP23XX_UART2_PHYS,
+ .membase = (char *)(IXP23XX_UART2_VIRT + 3),
+ .irq = IRQ_IXP23XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP23XX_UART_XTAL,
+ },
+ { },
+};
+
+static struct platform_device ixp23xx_uart = {
+ .name = "serial8250",
+ .id = 0,
+ .dev.platform_data = ixp23xx_uart_data,
+ .num_resources = 2,
+ .resource = ixp23xx_uart_resources,
+};
+
+static struct platform_device *ixp23xx_devices[] __initdata = {
+ &ixp23xx_uart,
+};
+
+void __init ixp23xx_sys_init(void)
+{
+ platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
+}
--- /dev/null
+/*
+ * arch/arm/mach-ixp23xx/espresso.c
+ *
+ * Double Espresso-specific routines
+ *
+ * Author: Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+static void __init espresso_init(void)
+{
+ physmap_configure(0x90000000, 0x02000000, 2, NULL);
+
+ /*
+ * Mark flash as writeable.
+ */
+ IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+
+ ixp23xx_sys_init();
+}
+
+MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
+ /* Maintainer: Lennert Buytenhek */
+ .phys_io = IXP23XX_PERIPHERAL_PHYS,
+ .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+ .map_io = ixp23xx_map_io,
+ .init_irq = ixp23xx_init_irq,
+ .timer = &ixp23xx_timer,
+ .boot_params = 0x00000100,
+ .init_machine = espresso_init,
+MACHINE_END
--- /dev/null
+/*
+ * arch/arm/mach-ixp23xx/ixdp2351.c
+ *
+ * IXDP2351 board-specific routines
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2004 (c) Intel Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+/*
+ * IXDP2351 Interrupt Handling
+ */
+static void ixdp2351_inta_mask(unsigned int irq)
+{
+ *IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(irq);
+}
+
+static void ixdp2351_inta_unmask(unsigned int irq)
+{
+ *IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(irq);
+}
+
+static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+ u16 ex_interrupt =
+ *IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID;
+ int i;
+
+ desc->chip->mask(irq);
+
+ for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) {
+ if (ex_interrupt & (1 << i)) {
+ struct irqdesc *cpld_desc;
+ int cpld_irq =
+ IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
+ cpld_desc = irq_desc + cpld_irq;
+ cpld_desc->handle(cpld_irq, cpld_desc, regs);
+ }
+ }
+
+ desc->chip->unmask(irq);
+}
+
+static struct irqchip ixdp2351_inta_chip = {
+ .ack = ixdp2351_inta_mask,
+ .mask = ixdp2351_inta_mask,
+ .unmask = ixdp2351_inta_unmask
+};
+
+static void ixdp2351_intb_mask(unsigned int irq)
+{
+ *IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(irq);
+}
+
+static void ixdp2351_intb_unmask(unsigned int irq)
+{
+ *IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(irq);
+}
+
+static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+ u16 ex_interrupt =
+ *IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID;
+ int i;
+
+ desc->chip->ack(irq);
+
+ for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) {
+ if (ex_interrupt & (1 << i)) {
+ struct irqdesc *cpld_desc;
+ int cpld_irq =
+ IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
+ cpld_desc = irq_desc + cpld_irq;
+ cpld_desc->handle(cpld_irq, cpld_desc, regs);
+ }
+ }
+
+ desc->chip->unmask(irq);
+}
+
+static struct irqchip ixdp2351_intb_chip = {
+ .ack = ixdp2351_intb_mask,
+ .mask = ixdp2351_intb_mask,
+ .unmask = ixdp2351_intb_unmask
+};
+
+void ixdp2351_init_irq(void)
+{
+ int irq;
+
+ /* Mask all interrupts from CPLD, disable simulation */
+ *IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1;
+ *IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1;
+ *IXDP2351_CPLD_INTA_SIM_REG = 0;
+ *IXDP2351_CPLD_INTB_SIM_REG = 0;
+
+ ixp23xx_init_irq();
+
+ for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE);
+ irq <
+ IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM);
+ irq++) {
+ if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) {
+ set_irq_flags(irq, IRQF_VALID);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_chip(irq, &ixdp2351_inta_chip);
+ }
+ }
+
+ for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE);
+ irq <
+ IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM);
+ irq++) {
+ if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) {
+ set_irq_flags(irq, IRQF_VALID);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_chip(irq, &ixdp2351_intb_chip);
+ }
+ }
+
+ set_irq_chained_handler(IRQ_IXP23XX_INTA, &ixdp2351_inta_handler);
+ set_irq_chained_handler(IRQ_IXP23XX_INTB, &ixdp2351_intb_handler);
+}
+
+/*
+ * IXDP2351 PCI
+ */
+
+/*
+ * This board does not do normal PCI IRQ routing, or any
+ * sort of swizzling, so we just need to check where on the
+ * bus the device is and figure out what CPLD pin it is
+ * being routed to.
+ */
+#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
+
+static int __init ixdp2351_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ u8 bus = dev->bus->number;
+ u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
+ struct pci_bus *tmp_bus = dev->bus;
+
+ /* Primary bus, no interrupts here */
+ if (!bus)
+ return -1;
+
+ /* Lookup first leaf in bus tree */
+ while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL))
+ tmp_bus = tmp_bus->parent;
+
+ /* Select between known bridges */
+ switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
+ /* Device is located after first bridge */
+ case 0x0008:
+ if (tmp_bus == dev->bus) {
+ /* Device is located directy after first bridge */
+ switch (devpin) {
+ /* Onboard 82546 */
+ case DEVPIN(1, 1): /* Onboard 82546 ch 0 */
+ return IRQ_IXDP2351_INTA_82546;
+ case DEVPIN(1, 2): /* Onboard 82546 ch 1 */
+ return IRQ_IXDP2351_INTB_82546;
+ /* PMC SLOT */
+ case DEVPIN(0, 1): /* PMCP INTA# */
+ case DEVPIN(2, 4): /* PMCS INTD# */
+ return IRQ_IXDP2351_SPCI_PMC_INTA;
+ case DEVPIN(0, 2): /* PMCP INTB# */
+ case DEVPIN(2, 1): /* PMCS INTA# */
+ return IRQ_IXDP2351_SPCI_PMC_INTB;
+ case DEVPIN(0, 3): /* PMCP INTC# */
+ case DEVPIN(2, 2): /* PMCS INTB# */
+ return IRQ_IXDP2351_SPCI_PMC_INTC;
+ case DEVPIN(0, 4): /* PMCP INTD# */
+ case DEVPIN(2, 3): /* PMCS INTC# */
+ return IRQ_IXDP2351_SPCI_PMC_INTD;
+ }
+ } else {
+ /* Device is located indirectly after first bridge */
+ /* Not supported now */
+ return -1;
+ }
+ break;
+ case 0x0010:
+ if (tmp_bus == dev->bus) {
+ /* Device is located directy after second bridge */
+ /* Secondary bus of second bridge */
+ switch (devpin) {
+ case DEVPIN(0, 1): /* DB#0 */
+ case DEVPIN(0, 2):
+ case DEVPIN(0, 3):
+ case DEVPIN(0, 4):
+ return IRQ_IXDP2351_SPCI_DB_0;
+ case DEVPIN(1, 1): /* DB#1 */
+ case DEVPIN(1, 2):
+ case DEVPIN(1, 3):
+ case DEVPIN(1, 4):
+ return IRQ_IXDP2351_SPCI_DB_1;
+ case DEVPIN(2, 1): /* FIC1 */
+ case DEVPIN(2, 2):
+ case DEVPIN(2, 3):
+ case DEVPIN(2, 4):
+ case DEVPIN(3, 1): /* FIC2 */
+ case DEVPIN(3, 2):
+ case DEVPIN(3, 3):
+ case DEVPIN(3, 4):
+ return IRQ_IXDP2351_SPCI_FIC;
+ }
+ } else {
+ /* Device is located indirectly after second bridge */
+ /* Not supported now */
+ return -1;
+ }
+ break;
+ }
+
+ return -1;
+}
+
+struct hw_pci ixdp2351_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = ixp23xx_pci_preinit,
+ .setup = ixp23xx_pci_setup,
+ .scan = ixp23xx_pci_scan_bus,
+ .map_irq = ixdp2351_map_irq,
+};
+
+int __init ixdp2351_pci_init(void)
+{
+ if (machine_is_ixdp2351())
+ pci_common_init(&ixdp2351_pci);
+
+ return 0;
+}
+
+subsys_initcall(ixdp2351_pci_init);
+
+/*
+ * IXDP2351 Static Mapped I/O
+ */
+static struct map_desc ixdp2351_io_desc[] __initdata = {
+ {
+ .virtual = IXDP2351_NP_VIRT_BASE,
+ .pfn = __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE),
+ .length = IXDP2351_NP_PHYS_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IXDP2351_BB_BASE_VIRT,
+ .pfn = __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS),
+ .length = IXDP2351_BB_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init ixdp2351_map_io(void)
+{
+ ixp23xx_map_io();
+ iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc));
+}
+
+static void __init ixdp2351_init(void)
+{
+ physmap_configure(0x90000000, 0x04000000, 1, NULL);
+
+ /*
+ * Mark flash as writeable
+ */
+ IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
+
+ ixp23xx_sys_init();
+}
+
+MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
+ /* Maintainer: MontaVista Software, Inc. */
+ .phys_io = IXP23XX_PERIPHERAL_PHYS,
+ .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+ .map_io = ixdp2351_map_io,
+ .init_irq = ixdp2351_init_irq,
+ .timer = &ixp23xx_timer,
+ .boot_params = 0x00000100,
+ .init_machine = ixdp2351_init,
+MACHINE_END
--- /dev/null
+/*
+ * arch/arm/mach-ixp23xx/pci.c
+ *
+ * PCI routines for IXP23XX based systems
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * based on original code:
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Copyright 2002-2005 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/system.h>
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+extern int (*external_fault) (unsigned long, struct pt_regs *);
+
+static int pci_master_aborts = 0;
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+int clear_master_aborts(void);
+
+static u32
+*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
+{
+ u32 *paddress;
+
+ /*
+ * Must be dword aligned
+ */
+ where &= ~3;
+
+ /*
+ * For top bus, generate type 0, else type 1
+ */
+ if (!bus_nr) {
+ if (PCI_SLOT(devfn) >= 8)
+ return 0;
+
+ paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
+ | (1 << (PCI_SLOT(devfn) + 16))
+ | (PCI_FUNC(devfn) << 8) | where);
+ } else {
+ paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
+ | (bus_nr << 16)
+ | (PCI_SLOT(devfn) << 11)
+ | (PCI_FUNC(devfn) << 8) | where);
+ }
+
+ return paddress;
+}
+
+/*
+ * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
+ * 0 and 3 are not valid indexes...
+ */
+static u32 bytemask[] = {
+ /*0*/ 0,
+ /*1*/ 0xff,
+ /*2*/ 0xffff,
+ /*3*/ 0,
+ /*4*/ 0xffffffff,
+};
+
+static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ u32 n;
+ u32 *addr;
+
+ n = where % 4;
+
+ DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+
+ addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ pci_master_aborts = 0;
+ *value = (*addr >> (8*n)) & bytemask[size];
+ if (pci_master_aborts) {
+ pci_master_aborts = 0;
+ *value = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * We don't do error checking on the address for writes.
+ * It's assumed that the user checked for the device existing first
+ * by doing a read first.
+ */
+static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ u32 mask;
+ u32 *addr;
+ u32 temp;
+
+ mask = ~(bytemask[size] << ((where % 0x4) * 8));
+ addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ temp = (u32) (value) << ((where % 0x4) * 8);
+ *addr = (*addr & mask) | temp;
+
+ clear_master_aborts();
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops ixp23xx_pci_ops = {
+ .read = ixp23xx_pci_read_config,
+ .write = ixp23xx_pci_write_config,
+};
+
+struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
+{
+ return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata);
+}
+
+int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ volatile unsigned long temp;
+ unsigned long flags;
+
+ pci_master_aborts = 1;
+
+ local_irq_save(flags);
+ temp = *IXP23XX_PCI_CONTROL;
+
+ /*
+ * master abort and cmd tgt err
+ */
+ if (temp & ((1 << 8) | (1 << 5)))
+ *IXP23XX_PCI_CONTROL = temp;
+
+ temp = *IXP23XX_PCI_CMDSTAT;
+
+ if (temp & (1 << 29))
+ *IXP23XX_PCI_CMDSTAT = temp;
+ local_irq_restore(flags);
+
+ /*
+ * If it was an imprecise abort, then we need to correct the
+ * return address to be _after_ the instruction.
+ */
+ if (fsr & (1 << 10))
+ regs->ARM_pc += 4;
+
+ return 0;
+}
+
+int clear_master_aborts(void)
+{
+ volatile u32 temp;
+
+ temp = *IXP23XX_PCI_CONTROL;
+
+ /*
+ * master abort and cmd tgt err
+ */
+ if (temp & ((1 << 8) | (1 << 5)))
+ *IXP23XX_PCI_CONTROL = temp;
+
+ temp = *IXP23XX_PCI_CMDSTAT;
+
+ if (temp & (1 << 29))
+ *IXP23XX_PCI_CMDSTAT = temp;
+
+ return 0;
+}
+
+void __init ixp23xx_pci_preinit(void)
+{
+#ifdef __ARMEB__
+ *IXP23XX_PCI_CONTROL |= 0x20000; /* set I/O swapping */
+#endif
+ /*
+ * ADDR_31 needs to be clear for PCI memory access to CPP memory
+ */
+ *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
+ *IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
+
+ /*
+ * Select correct memory for PCI inbound transactions
+ */
+ if (ixp23xx_cpp_boot()) {
+ *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
+ } else {
+ *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
+ }
+
+ hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS,
+ "PCI config cycle to non-existent device");
+
+ *IXP23XX_PCI_ADDR_EXT = 0x0000e000;
+}
+
+/*
+ * Prevent PCI layer from seeing the inbound host-bridge resources
+ */
+static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
+{
+ int i;
+
+ dev->class &= 0xff;
+ dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
+
+/*
+ * IXP2300 systems often have large resource requirements, so we just
+ * use our own resource space.
+ */
+static struct resource ixp23xx_pci_mem_space = {
+ .start = IXP23XX_PCI_MEM_START,
+ .end = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "PCI Mem Space"
+};
+
+static struct resource ixp23xx_pci_io_space = {
+ .start = 0x00000100,
+ .end = 0x01ffffff,
+ .flags = IORESOURCE_IO,
+ .name = "PCI I/O Space"
+};
+
+int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+ if (nr >= 1)
+ return 0;
+
+ sys->resource[0] = &ixp23xx_pci_io_space;
+ sys->resource[1] = &ixp23xx_pci_mem_space;
+ sys->resource[2] = NULL;
+
+ return 1;
+}
--- /dev/null
+/*
+ * arch/arm/mach-ixp23xx/roadrunner.c
+ *
+ * RoadRunner board-specific routines
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+/*
+ * Interrupt mapping
+ */
+#define INTA IRQ_ROADRUNNER_PCI_INTA
+#define INTB IRQ_ROADRUNNER_PCI_INTB
+#define INTC IRQ_ROADRUNNER_PCI_INTC
+#define INTD IRQ_ROADRUNNER_PCI_INTD
+
+#define INTC_PIN IXP23XX_GPIO_PIN_11
+#define INTD_PIN IXP23XX_GPIO_PIN_12
+
+static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+{
+ static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA};
+ static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD};
+ static int usb_irq[] = {INTB, INTC, INTD, -1};
+ static int mini_pci_1_irq[] = {INTB, INTC, -1, -1};
+ static int mini_pci_2_irq[] = {INTC, INTD, -1, -1};
+
+ switch(dev->bus->number) {
+ case 0:
+ switch(dev->devfn) {
+ case 0x0: // PCI-PCI bridge
+ break;
+ case 0x8: // PCI Card Slot
+ return pci_card_slot_irq[pin - 1];
+ case 0x10: // PMC Slot
+ return pmc_card_slot_irq[pin - 1];
+ case 0x18: // PMC Slot Secondary Agent
+ break;
+ case 0x20: // IXP Processor
+ break;
+ default:
+ return NO_IRQ;
+ }
+ break;
+
+ case 1:
+ switch(dev->devfn) {
+ case 0x0: // IDE Controller
+ return (pin == 1) ? INTC : -1;
+ case 0x8: // USB fun 0
+ case 0x9: // USB fun 1
+ case 0xa: // USB fun 2
+ return usb_irq[pin - 1];
+ case 0x10: // Mini PCI 1
+ return mini_pci_1_irq[pin-1];
+ case 0x18: // Mini PCI 2
+ return mini_pci_2_irq[pin-1];
+ case 0x20: // MEM slot
+ return (pin == 1) ? INTA : -1;
+ default:
+ return NO_IRQ;
+ }
+ break;
+
+ default:
+ return NO_IRQ;
+ }
+
+ return NO_IRQ;
+}
+
+static void roadrunner_pci_preinit(void)
+{
+ set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW);
+ set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW);
+
+ ixp23xx_pci_preinit();
+}
+
+static struct hw_pci roadrunner_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = roadrunner_pci_preinit,
+ .setup = ixp23xx_pci_setup,
+ .scan = ixp23xx_pci_scan_bus,
+ .map_irq = roadrunner_map_irq,
+};
+
+static int __init roadrunner_pci_init(void)
+{
+ if (machine_is_roadrunner())
+ pci_common_init(&roadrunner_pci);
+
+ return 0;
+};
+
+subsys_initcall(roadrunner_pci_init);
+
+static void __init roadrunner_init(void)
+{
+ physmap_configure(0x90000000, 0x04000000, 2, NULL);
+
+ /*
+ * Mark flash as writeable
+ */
+ IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
+ IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
+
+ ixp23xx_sys_init();
+}
+
+MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
+ /* Maintainer: Deepak Saxena */
+ .phys_io = IXP23XX_PERIPHERAL_PHYS,
+ .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+ .map_io = ixp23xx_map_io,
+ .init_irq = ixp23xx_init_irq,
+ .timer = &ixp23xx_timer,
+ .boot_params = 0x00000100,
+ .init_machine = roadrunner_init,
+MACHINE_END
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/arch/ixp23xx.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ mmu enabled?
+ ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical
+ ldrne \rx, =IXP23XX_PERIPHERAL_VIRT @ virtual
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/dma.h
+ */
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/entry-macro.S
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
+ ldr \irqnr, [\irqnr] @ get interrupt number
+ cmp \irqnr, #0x0 @ suprious interrupt ?
+ movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits
+ subne \irqnr, \irqnr, #1 @ convert to 0 based
+
+#if 0
+ cmp \irqnr, #IRQ_IXP23XX_PCI_INT_RPH
+ bne 1001f
+ mov \irqnr, #IRQ_IXP23XX_INTA
+
+ ldr \irqnr, =0xf5000030
+
+ mov \tmp, #(1<<26)
+ tst \irqnr, \tmp
+ movne \irqnr, #IRQ_IXP23XX_INTB
+
+ mov \tmp, #(1<<27)
+ tst \irqnr, \tmp
+ movne \irqnr, #IRQ_IXP23XX_INTA
+1001:
+#endif
+ .endm
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/hardware.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ * Copyricht (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Hardware definitions for IXP23XX based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* PCI IO info */
+#define PCIO_BASE IXP23XX_PCI_IO_VIRT
+#define PCIBIOS_MIN_IO 0x00000000
+#define PCIBIOS_MIN_MEM 0xe0000000
+
+#include "ixp23xx.h"
+
+#define pcibios_assign_all_busses() 0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific headers
+ */
+#include "ixdp2351.h"
+
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2003-2005 Intel Corp.
+ * Copyright (C) 2005 MontaVista Software, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
+#define __mem_pci(a) (a)
+
+#include <linux/kernel.h> /* For BUG */
+
+static inline void __iomem *
+ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned long flags)
+{
+ if (addr >= IXP23XX_PCI_MEM_START &&
+ addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
+ if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
+ return NULL;
+
+ return (void __iomem *)
+ ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
+ }
+
+ return __ioremap(addr, size, flags);
+}
+
+static inline void
+ixp23xx_iounmap(void __iomem *addr)
+{
+ if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
+ (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
+ return;
+
+ __iounmap(addr);
+}
+
+#define __arch_ioremap(a,s,f) ixp23xx_ioremap(a,s,f)
+#define __arch_iounmap(a) ixp23xx_iounmap(a)
+
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/irqs.h
+ *
+ * IRQ definitions for IXP23XX based systems
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright (C) 2003-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define NR_IXP23XX_IRQS IRQ_IXP23XX_INTB+1
+#define IRQ_IXP23XX_EXTIRQS NR_IXP23XX_IRQS
+
+
+#define IRQ_IXP23XX_DBG0 0 /* Debug/Execution/MBox */
+#define IRQ_IXP23XX_DBG1 1 /* Debug/Execution/MBox */
+#define IRQ_IXP23XX_NPE_TRG 2 /* npe_trigger */
+#define IRQ_IXP23XX_TIMER1 3 /* Timer[0] */
+#define IRQ_IXP23XX_TIMER2 4 /* Timer[1] */
+#define IRQ_IXP23XX_TIMESTAMP 5 /* Timer[2], Time-stamp */
+#define IRQ_IXP23XX_WDOG 6 /* Time[3], Watchdog Timer */
+#define IRQ_IXP23XX_PCI_DBELL 7 /* PCI Doorbell */
+#define IRQ_IXP23XX_PCI_DMA1 8 /* PCI DMA Channel 1 */
+#define IRQ_IXP23XX_PCI_DMA2 9 /* PCI DMA Channel 2 */
+#define IRQ_IXP23XX_PCI_DMA3 10 /* PCI DMA Channel 3 */
+#define IRQ_IXP23XX_PCI_INT_RPH 11 /* pcxg_pci_int_rph */
+#define IRQ_IXP23XX_CPP_PMU 12 /* xpxg_pm_int_rpl */
+#define IRQ_IXP23XX_SWINT0 13 /* S/W Interrupt0 */
+#define IRQ_IXP23XX_SWINT1 14 /* S/W Interrupt1 */
+#define IRQ_IXP23XX_UART2 15 /* UART1 Interrupt */
+#define IRQ_IXP23XX_UART1 16 /* UART0 Interrupt */
+#define IRQ_IXP23XX_XSI_PMU_ROLLOVER 17 /* AHB Performance M. Unit counter rollover */
+#define IRQ_IXP23XX_XSI_AHB_PM0 18 /* intr_pm_o */
+#define IRQ_IXP23XX_XSI_AHB_ECE0 19 /* intr_ece_o */
+#define IRQ_IXP23XX_XSI_AHB_GASKET 20 /* gas_intr_o */
+#define IRQ_IXP23XX_XSI_CPP 21 /* xsi2cpp_int */
+#define IRQ_IXP23XX_CPP_XSI 22 /* cpp2xsi_int */
+#define IRQ_IXP23XX_ME_ATTN0 23 /* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN1 24 /* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN2 25 /* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN3 26 /* ME_ATTN */
+#define IRQ_IXP23XX_PCI_ERR_RPH 27 /* PCXG_PCI_ERR_RPH */
+#define IRQ_IXP23XX_D0XG_ECC_CORR 28 /* D0XG_DRAM_ECC_CORR */
+#define IRQ_IXP23XX_D0XG_ECC_UNCORR 29 /* D0XG_DRAM_ECC_UNCORR */
+#define IRQ_IXP23XX_SRAM_ERR1 30 /* SRAM1_ERR */
+#define IRQ_IXP23XX_SRAM_ERR0 31 /* SRAM0_ERR */
+#define IRQ_IXP23XX_MEDIA_ERR 32 /* MEDIA_ERR */
+#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ 33 /* STH_DRAM0_ECC_MAJ */
+#define IRQ_IXP23XX_GPIO6 34 /* GPIO0 interrupts */
+#define IRQ_IXP23XX_GPIO7 35 /* GPIO1 interrupts */
+#define IRQ_IXP23XX_GPIO8 36 /* GPIO2 interrupts */
+#define IRQ_IXP23XX_GPIO9 37 /* GPIO3 interrupts */
+#define IRQ_IXP23XX_GPIO10 38 /* GPIO4 interrupts */
+#define IRQ_IXP23XX_GPIO11 39 /* GPIO5 interrupts */
+#define IRQ_IXP23XX_GPIO12 40 /* GPIO6 interrupts */
+#define IRQ_IXP23XX_GPIO13 41 /* GPIO7 interrupts */
+#define IRQ_IXP23XX_GPIO14 42 /* GPIO8 interrupts */
+#define IRQ_IXP23XX_GPIO15 43 /* GPIO9 interrupts */
+#define IRQ_IXP23XX_SHAC_RING0 44 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING1 45 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING2 46 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING3 47 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING4 48 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING5 49 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING6 50 /* SHAC RING Full */
+#define IRQ_IXP23XX_SHAC_RING7 51 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING8 52 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING9 53 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING10 54 /* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING11 55 /* SHAC Ring Full */
+#define IRQ_IXP23XX_ME_THREAD_A0_ME0 56 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A1_ME0 57 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A2_ME0 58 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A3_ME0 59 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A4_ME0 60 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A5_ME0 61 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A6_ME0 62 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A7_ME0 63 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A8_ME1 64 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A9_ME1 65 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A10_ME1 66 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A11_ME1 67 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A12_ME1 68 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A13_ME1 69 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A14_ME1 70 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A15_ME1 71 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A16_ME2 72 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A17_ME2 73 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A18_ME2 74 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A19_ME2 75 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A20_ME2 76 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A21_ME2 77 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A22_ME2 78 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A23_ME2 79 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A24_ME3 80 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A25_ME3 81 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A26_ME3 82 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A27_ME3 83 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A28_ME3 84 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A29_ME3 85 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A30_ME3 86 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A31_ME3 87 /* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_B0_ME0 88 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B1_ME0 89 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B2_ME0 90 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B3_ME0 91 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B4_ME0 92 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B5_ME0 93 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B6_ME0 94 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B7_ME0 95 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B8_ME1 96 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B9_ME1 97 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B10_ME1 98 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B11_ME1 99 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B12_ME1 100 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B13_ME1 101 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B14_ME1 102 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B15_ME1 103 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B16_ME2 104 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B17_ME2 105 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B18_ME2 106 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B19_ME2 107 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B20_ME2 108 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B21_ME2 109 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B22_ME2 110 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B23_ME2 111 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B24_ME3 112 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B25_ME3 113 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B26_ME3 114 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B27_ME3 115 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B28_ME3 116 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B29_ME3 117 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B30_ME3 118 /* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B31_ME3 119 /* ME_THREAD_B */
+
+#define NUM_IXP23XX_RAW_IRQS 120
+
+#define IRQ_IXP23XX_INTA 120 /* Indirect pcxg_pci_int_rph */
+#define IRQ_IXP23XX_INTB 121 /* Indirect pcxg_pci_int_rph */
+
+#define NR_IXP23XX_IRQ (IRQ_IXP23XX_INTB + 1)
+
+/*
+ * We default to 32 per-board IRQs. Increase this number if you need
+ * more, but keep it realistic.
+ */
+#define NR_IXP23XX_MACH_IRQS 32
+
+#define NR_IRQS NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS
+
+#define IXP23XX_MACH_IRQ(irq) (NR_IXP23XX_IRQ + (irq))
+
+
+/*
+ * IXDP2351-specific interrupts
+ */
+
+/*
+ * External PCI interrupts signaled through INTB
+ *
+ */
+#define IXDP2351_INTB_IRQ_BASE 0
+#define IRQ_IXDP2351_INTA_82546 IXP23XX_MACH_IRQ(0)
+#define IRQ_IXDP2351_INTB_82546 IXP23XX_MACH_IRQ(1)
+#define IRQ_IXDP2351_SPCI_DB_0 IXP23XX_MACH_IRQ(2)
+#define IRQ_IXDP2351_SPCI_DB_1 IXP23XX_MACH_IRQ(3)
+#define IRQ_IXDP2351_SPCI_PMC_INTA IXP23XX_MACH_IRQ(4)
+#define IRQ_IXDP2351_SPCI_PMC_INTB IXP23XX_MACH_IRQ(5)
+#define IRQ_IXDP2351_SPCI_PMC_INTC IXP23XX_MACH_IRQ(6)
+#define IRQ_IXDP2351_SPCI_PMC_INTD IXP23XX_MACH_IRQ(7)
+#define IRQ_IXDP2351_SPCI_FIC IXP23XX_MACH_IRQ(8)
+
+#define IXDP2351_INTB_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(0))
+#define IXDP2351_INTB_IRQ_MASK(irq) (1 << IXDP2351_INTB_IRQ_BIT(irq))
+#define IXDP2351_INTB_IRQ_VALID 0x01FF
+#define IXDP2351_INTB_IRQ_NUM 16
+
+/*
+ * Other external interrupts signaled through INTA
+ */
+#define IXDP2351_INTA_IRQ_BASE 16
+#define IRQ_IXDP2351_IPMI_FROM IXP23XX_MACH_IRQ(16)
+#define IRQ_IXDP2351_125US IXP23XX_MACH_IRQ(17)
+#define IRQ_IXDP2351_DB_0_ADD IXP23XX_MACH_IRQ(18)
+#define IRQ_IXDP2351_DB_1_ADD IXP23XX_MACH_IRQ(19)
+#define IRQ_IXDP2351_DEBUG1 IXP23XX_MACH_IRQ(20)
+#define IRQ_IXDP2351_ADD_UART IXP23XX_MACH_IRQ(21)
+#define IRQ_IXDP2351_FIC_ADD IXP23XX_MACH_IRQ(24)
+#define IRQ_IXDP2351_CS8900 IXP23XX_MACH_IRQ(25)
+#define IRQ_IXDP2351_BBSRAM IXP23XX_MACH_IRQ(26)
+#define IRQ_IXDP2351_CONFIG_MEDIA IXP23XX_MACH_IRQ(27)
+#define IRQ_IXDP2351_CLOCK_REF IXP23XX_MACH_IRQ(28)
+#define IRQ_IXDP2351_A10_NP IXP23XX_MACH_IRQ(29)
+#define IRQ_IXDP2351_A11_NP IXP23XX_MACH_IRQ(30)
+#define IRQ_IXDP2351_DEBUG_NP IXP23XX_MACH_IRQ(31)
+
+#define IXDP2351_INTA_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(16))
+#define IXDP2351_INTA_IRQ_MASK(irq) (1 << IXDP2351_INTA_IRQ_BIT(irq))
+#define IXDP2351_INTA_IRQ_VALID 0xFF3F
+#define IXDP2351_INTA_IRQ_NUM 16
+
+
+/*
+ * ADI RoadRunner IRQs
+ */
+#define IRQ_ROADRUNNER_PCI_INTA IRQ_IXP23XX_INTA
+#define IRQ_ROADRUNNER_PCI_INTB IRQ_IXP23XX_INTB
+#define IRQ_ROADRUNNER_PCI_INTC IRQ_IXP23XX_GPIO11
+#define IRQ_ROADRUNNER_PCI_INTD IRQ_IXP23XX_GPIO12
+
+/*
+ * Put new board definitions here
+ */
+
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/ixdp2351.h
+ *
+ * Register and other defines for IXDP2351
+ *
+ * Copyright (c) 2002-2004 Intel Corp.
+ * Copytight (c) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_IXDP2351_H
+#define __ASM_ARCH_IXDP2351_H
+
+/*
+ * NP module memory map
+ */
+#define IXDP2351_NP_PHYS_BASE (IXP23XX_EXP_BUS_CS4_BASE)
+#define IXDP2351_NP_PHYS_SIZE 0x00100000
+#define IXDP2351_NP_VIRT_BASE 0xeff00000
+
+#define IXDP2351_VIRT_CS8900_BASE (IXDP2351_NP_VIRT_BASE)
+#define IXDP2351_VIRT_CS8900_END (IXDP2351_VIRT_CS8900_BASE + 16)
+
+#define IXDP2351_VIRT_NP_CPLD_BASE (IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000)
+
+#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg))
+
+#define IXDP2351_NP_CPLD_RESET1_REG IXDP2351_NP_CPLD_REG(0x00)
+#define IXDP2351_NP_CPLD_LED_REG IXDP2351_NP_CPLD_REG(0x02)
+#define IXDP2351_NP_CPLD_VERSION_REG IXDP2351_NP_CPLD_REG(0x04)
+
+/*
+ * Base board module memory map
+ */
+
+#define IXDP2351_BB_BASE_PHYS (IXP23XX_EXP_BUS_CS5_BASE)
+#define IXDP2351_BB_SIZE 0x01000000
+#define IXDP2351_BB_BASE_VIRT (0xee000000)
+
+#define IXDP2351_BB_AREA_BASE(offset) (IXDP2351_BB_BASE_VIRT + offset)
+
+#define IXDP2351_VIRT_NVRAM_BASE IXDP2351_BB_AREA_BASE(0x0)
+#define IXDP2351_NVRAM_SIZE (0x20000)
+
+#define IXDP2351_VIRT_MB_IXF1104_BASE IXDP3251_BB_AREA_BASE(0x00020000)
+#define IXDP2351_VIRT_ADD_UART_BASE IXDP2351_BB_AREA_BASE(0x000240C0)
+#define IXDP2351_VIRT_FIC_BASE IXDP2351_BB_AREA_BASE(0x00200000)
+#define IXDP2351_VIRT_DB0_BASE IXDP2351_BB_AREA_BASE(0x00400000)
+#define IXDP2351_VIRT_DB1_BASE IXDP2351_BB_AREA_BASE(0x00600000)
+#define IXDP2351_VIRT_CPLD_BASE IXDP2351_BB_AREA_BASE(0x00024000)
+
+/*
+ * On board CPLD registers
+ */
+#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg))
+
+#define IXDP2351_CPLD_RESET0_REG IXDP2351_CPLD_BB_REG(0x00)
+#define IXDP2351_CPLD_RESET1_REG IXDP2351_CPLD_BB_REG(0x04)
+
+#define IXDP2351_CPLD_RESET1_MAGIC 0x55AA
+#define IXDP2351_CPLD_RESET1_ENABLE 0x8000
+
+#define IXDP2351_CPLD_FPGA_CONFIG_REG IXDP2351_CPLD_BB_REG(0x08)
+#define IXDP2351_CPLD_INTB_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x10)
+#define IXDP2351_CPLD_INTA_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x14)
+#define IXDP2351_CPLD_INTB_STAT_REG IXDP2351_CPLD_BB_REG(0x18)
+#define IXDP2351_CPLD_INTA_STAT_REG IXDP2351_CPLD_BB_REG(0x1C)
+#define IXDP2351_CPLD_INTB_RAW_REG IXDP2351_CPLD_BB_REG(0x20) /* read */
+#define IXDP2351_CPLD_INTA_RAW_REG IXDP2351_CPLD_BB_REG(0x24) /* read */
+#define IXDP2351_CPLD_INTB_MASK_CLR_REG IXDP2351_CPLD_INTB_RAW_REG /* write */
+#define IXDP2351_CPLD_INTA_MASK_CLR_REG IXDP2351_CPLD_INTA_RAW_REG /* write */
+#define IXDP2351_CPLD_INTB_SIM_REG IXDP2351_CPLD_BB_REG(0x28)
+#define IXDP2351_CPLD_INTA_SIM_REG IXDP2351_CPLD_BB_REG(0x2C)
+ /* Interrupt bits are defined in irqs.h */
+#define IXDP2351_CPLD_BB_GBE0_REG IXDP2351_CPLD_BB_REG(0x30)
+#define IXDP2351_CPLD_BB_GBE1_REG IXDP2351_CPLD_BB_REG(0x34)
+
+/* #define IXDP2351_CPLD_BB_MISC_REG IXDP2351_CPLD_REG(0x1C) */
+/* #define IXDP2351_CPLD_BB_MISC_REV_MASK 0xFF */
+/* #define IXDP2351_CPLD_BB_GDXCS0_REG IXDP2351_CPLD_REG(0x24) */
+/* #define IXDP2351_CPLD_BB_GDXCS1_REG IXDP2351_CPLD_REG(0x28) */
+/* #define IXDP2351_CPLD_BB_CLOCK_REG IXDP2351_CPLD_REG(0x04) */
+
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/ixp23xx.h
+ *
+ * Register definitions for IXP23XX
+ *
+ * Copyright (C) 2003-2005 Intel Corporation.
+ * Copyright (C) 2005 MontaVista Software, Inc.
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IXP23XX_H
+#define __ASM_ARCH_IXP23XX_H
+
+/*
+ * IXP2300 linux memory map:
+ *
+ * virt phys size
+ * fffd0000 a0000000 64K XSI2CPP_CSR
+ * fffc0000 c4000000 4K EXP_CFG
+ * fff00000 c8000000 64K PERIPHERAL
+ * fe000000 1c0000000 16M CAP_CSR
+ * fd000000 1c8000000 16M MSF_CSR
+ * fb000000 16M ---
+ * fa000000 1d8000000 32M PCI_IO
+ * f8000000 1da000000 32M PCI_CFG
+ * f6000000 1de000000 32M PCI_CREG
+ * f4000000 32M ---
+ * f0000000 1e0000000 64M PCI_MEM
+ * e[c-f]000000 per-platform mappings
+ */
+
+
+/****************************************************************************
+ * Static mappings.
+ ****************************************************************************/
+#define IXP23XX_XSI2CPP_CSR_PHYS 0xa0000000
+#define IXP23XX_XSI2CPP_CSR_VIRT 0xfffd0000
+#define IXP23XX_XSI2CPP_CSR_SIZE 0x00010000
+
+#define IXP23XX_EXP_CFG_PHYS 0xc4000000
+#define IXP23XX_EXP_CFG_VIRT 0xfffc0000
+#define IXP23XX_EXP_CFG_SIZE 0x00001000
+
+#define IXP23XX_PERIPHERAL_PHYS 0xc8000000
+#define IXP23XX_PERIPHERAL_VIRT 0xfff00000
+#define IXP23XX_PERIPHERAL_SIZE 0x00010000
+
+#define IXP23XX_CAP_CSR_PHYS 0x1c0000000ULL
+#define IXP23XX_CAP_CSR_VIRT 0xfe000000
+#define IXP23XX_CAP_CSR_SIZE 0x01000000
+
+#define IXP23XX_MSF_CSR_PHYS 0x1c8000000ULL
+#define IXP23XX_MSF_CSR_VIRT 0xfd000000
+#define IXP23XX_MSF_CSR_SIZE 0x01000000
+
+#define IXP23XX_PCI_IO_PHYS 0x1d8000000ULL
+#define IXP23XX_PCI_IO_VIRT 0xfa000000
+#define IXP23XX_PCI_IO_SIZE 0x02000000
+
+#define IXP23XX_PCI_CFG_PHYS 0x1da000000ULL
+#define IXP23XX_PCI_CFG_VIRT 0xf8000000
+#define IXP23XX_PCI_CFG_SIZE 0x02000000
+#define IXP23XX_PCI_CFG0_VIRT IXP23XX_PCI_CFG_VIRT
+#define IXP23XX_PCI_CFG1_VIRT (IXP23XX_PCI_CFG_VIRT + 0x01000000)
+
+#define IXP23XX_PCI_CREG_PHYS 0x1de000000ULL
+#define IXP23XX_PCI_CREG_VIRT 0xf6000000
+#define IXP23XX_PCI_CREG_SIZE 0x02000000
+#define IXP23XX_PCI_CSR_VIRT (IXP23XX_PCI_CREG_VIRT + 0x01000000)
+
+#define IXP23XX_PCI_MEM_START 0xe0000000
+#define IXP23XX_PCI_MEM_PHYS 0x1e0000000ULL
+#define IXP23XX_PCI_MEM_VIRT 0xf0000000
+#define IXP23XX_PCI_MEM_SIZE 0x04000000
+
+
+/****************************************************************************
+ * XSI2CPP CSRs.
+ ****************************************************************************/
+#define IXP23XX_XSI2CPP_REG(x) ((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x)))
+#define IXP23XX_CPP2XSI_CURR_XFER_REG3 IXP23XX_XSI2CPP_REG(0xf8)
+#define IXP23XX_CPP2XSI_ADDR_31 (1 << 19)
+#define IXP23XX_CPP2XSI_PSH_OFF (1 << 20)
+#define IXP23XX_CPP2XSI_COH_OFF (1 << 21)
+
+
+/****************************************************************************
+ * Expansion Bus Config.
+ ****************************************************************************/
+#define IXP23XX_EXP_CFG_REG(x) ((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x)))
+#define IXP23XX_EXP_CS0 IXP23XX_EXP_CFG_REG(0x00)
+#define IXP23XX_EXP_CS1 IXP23XX_EXP_CFG_REG(0x04)
+#define IXP23XX_EXP_CS2 IXP23XX_EXP_CFG_REG(0x08)
+#define IXP23XX_EXP_CS3 IXP23XX_EXP_CFG_REG(0x0c)
+#define IXP23XX_EXP_CS4 IXP23XX_EXP_CFG_REG(0x10)
+#define IXP23XX_EXP_CS5 IXP23XX_EXP_CFG_REG(0x14)
+#define IXP23XX_EXP_CS6 IXP23XX_EXP_CFG_REG(0x18)
+#define IXP23XX_EXP_CS7 IXP23XX_EXP_CFG_REG(0x1c)
+#define IXP23XX_FLASH_WRITABLE (0x2)
+#define IXP23XX_FLASH_BUS8 (0x1)
+
+#define IXP23XX_EXP_CFG0 IXP23XX_EXP_CFG_REG(0x20)
+#define IXP23XX_EXP_CFG1 IXP23XX_EXP_CFG_REG(0x24)
+#define IXP23XX_EXP_CFG0_MEM_MAP (1 << 31)
+#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL (3 << 22)
+#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN (1 << 21)
+#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL (3 << 19)
+#define IXP23XX_EXP_CFG0_CPP_SPEED_EN (1 << 18)
+#define IXP23XX_EXP_CFG0_PCI_SWIN (3 << 16)
+#define IXP23XX_EXP_CFG0_PCI_DWIN (3 << 14)
+#define IXP23XX_EXP_CFG0_PCI33_MODE (1 << 13)
+#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL (1 << 12)
+#define IXP23XX_EXP_CFG0_CPP_DIV_SEL (1 << 5)
+#define IXP23XX_EXP_CFG0_XSI_NOT_PRES (1 << 4)
+#define IXP23XX_EXP_CFG0_PROM_BOOT (1 << 3)
+#define IXP23XX_EXP_CFG0_PCI_ARB (1 << 2)
+#define IXP23XX_EXP_CFG0_PCI_HOST (1 << 1)
+#define IXP23XX_EXP_CFG0_FLASH_WIDTH (1 << 0)
+
+#define IXP23XX_EXP_UNIT_FUSE IXP23XX_EXP_CFG_REG(0x28)
+#define IXP23XX_EXP_MSF_MUX IXP23XX_EXP_CFG_REG(0x30)
+
+#define IXP23XX_EXP_BUS_PHYS 0x90000000
+#define IXP23XX_EXP_BUS_WINDOW_SIZE 0x01000000
+
+#define IXP23XX_EXP_BUS_CS0_BASE (IXP23XX_EXP_BUS_PHYS + 0x00000000)
+#define IXP23XX_EXP_BUS_CS1_BASE (IXP23XX_EXP_BUS_PHYS + 0x01000000)
+#define IXP23XX_EXP_BUS_CS2_BASE (IXP23XX_EXP_BUS_PHYS + 0x02000000)
+#define IXP23XX_EXP_BUS_CS3_BASE (IXP23XX_EXP_BUS_PHYS + 0x03000000)
+#define IXP23XX_EXP_BUS_CS4_BASE (IXP23XX_EXP_BUS_PHYS + 0x04000000)
+#define IXP23XX_EXP_BUS_CS5_BASE (IXP23XX_EXP_BUS_PHYS + 0x05000000)
+#define IXP23XX_EXP_BUS_CS6_BASE (IXP23XX_EXP_BUS_PHYS + 0x06000000)
+#define IXP23XX_EXP_BUS_CS7_BASE (IXP23XX_EXP_BUS_PHYS + 0x07000000)
+
+
+/****************************************************************************
+ * Peripherals.
+ ****************************************************************************/
+#define IXP23XX_UART1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x0000)
+#define IXP23XX_UART2_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x1000)
+#define IXP23XX_PMU_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x2000)
+#define IXP23XX_INTC_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x3000)
+#define IXP23XX_GPIO_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x4000)
+#define IXP23XX_TIMER_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x5000)
+#define IXP23XX_NPE0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x6000)
+#define IXP23XX_DSR_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x7000)
+#define IXP23XX_NPE1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x8000)
+#define IXP23XX_ETH0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x9000)
+#define IXP23XX_ETH1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xA000)
+#define IXP23XX_GIG0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xB000)
+#define IXP23XX_GIG1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xC000)
+#define IXP23XX_DDRS_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xD000)
+
+#define IXP23XX_UART1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x0000)
+#define IXP23XX_UART2_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x1000)
+#define IXP23XX_PMU_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x2000)
+#define IXP23XX_INTC_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x3000)
+#define IXP23XX_GPIO_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x4000)
+#define IXP23XX_TIMER_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x5000)
+#define IXP23XX_NPE0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x6000)
+#define IXP23XX_DSR_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x7000)
+#define IXP23XX_NPE1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x8000)
+#define IXP23XX_ETH0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x9000)
+#define IXP23XX_ETH1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xA000)
+#define IXP23XX_GIG0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xB000)
+#define IXP23XX_GIG1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xC000)
+#define IXP23XX_DDRS_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xD000)
+
+
+/****************************************************************************
+ * Interrupt controller.
+ ****************************************************************************/
+#define IXP23XX_INTC_REG(x) ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x)))
+#define IXP23XX_INTR_ST1 IXP23XX_INTC_REG(0x00)
+#define IXP23XX_INTR_ST2 IXP23XX_INTC_REG(0x04)
+#define IXP23XX_INTR_ST3 IXP23XX_INTC_REG(0x08)
+#define IXP23XX_INTR_ST4 IXP23XX_INTC_REG(0x0c)
+#define IXP23XX_INTR_EN1 IXP23XX_INTC_REG(0x10)
+#define IXP23XX_INTR_EN2 IXP23XX_INTC_REG(0x14)
+#define IXP23XX_INTR_EN3 IXP23XX_INTC_REG(0x18)
+#define IXP23XX_INTR_EN4 IXP23XX_INTC_REG(0x1c)
+#define IXP23XX_INTR_SEL1 IXP23XX_INTC_REG(0x20)
+#define IXP23XX_INTR_SEL2 IXP23XX_INTC_REG(0x24)
+#define IXP23XX_INTR_SEL3 IXP23XX_INTC_REG(0x28)
+#define IXP23XX_INTR_SEL4 IXP23XX_INTC_REG(0x2c)
+#define IXP23XX_INTR_IRQ_ST1 IXP23XX_INTC_REG(0x30)
+#define IXP23XX_INTR_IRQ_ST2 IXP23XX_INTC_REG(0x34)
+#define IXP23XX_INTR_IRQ_ST3 IXP23XX_INTC_REG(0x38)
+#define IXP23XX_INTR_IRQ_ST4 IXP23XX_INTC_REG(0x3c)
+#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET 0x54
+
+
+/****************************************************************************
+ * GPIO.
+ ****************************************************************************/
+#define IXP23XX_GPIO_REG(x) ((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x)))
+#define IXP23XX_GPIO_GPOUTR IXP23XX_GPIO_REG(0x00)
+#define IXP23XX_GPIO_GPOER IXP23XX_GPIO_REG(0x04)
+#define IXP23XX_GPIO_GPINR IXP23XX_GPIO_REG(0x08)
+#define IXP23XX_GPIO_GPISR IXP23XX_GPIO_REG(0x0c)
+#define IXP23XX_GPIO_GPIT1R IXP23XX_GPIO_REG(0x10)
+#define IXP23XX_GPIO_GPIT2R IXP23XX_GPIO_REG(0x14)
+#define IXP23XX_GPIO_GPCLKR IXP23XX_GPIO_REG(0x18)
+#define IXP23XX_GPIO_GPDBSELR IXP23XX_GPIO_REG(0x1c)
+
+#define IXP23XX_GPIO_STYLE_MASK 0x7
+#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH 0x0
+#define IXP23XX_GPIO_STYLE_ACTIVE_LOW 0x1
+#define IXP23XX_GPIO_STYLE_RISING_EDGE 0x2
+#define IXP23XX_GPIO_STYLE_FALLING_EDGE 0x3
+#define IXP23XX_GPIO_STYLE_TRANSITIONAL 0x4
+
+#define IXP23XX_GPIO_STYLE_SIZE 3
+
+
+/****************************************************************************
+ * Timer.
+ ****************************************************************************/
+#define IXP23XX_TIMER_REG(x) ((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x)))
+#define IXP23XX_TIMER_CONT IXP23XX_TIMER_REG(0x00)
+#define IXP23XX_TIMER1_TIMESTAMP IXP23XX_TIMER_REG(0x04)
+#define IXP23XX_TIMER1_RELOAD IXP23XX_TIMER_REG(0x08)
+#define IXP23XX_TIMER2_TIMESTAMP IXP23XX_TIMER_REG(0x0c)
+#define IXP23XX_TIMER2_RELOAD IXP23XX_TIMER_REG(0x10)
+#define IXP23XX_TIMER_WDOG IXP23XX_TIMER_REG(0x14)
+#define IXP23XX_TIMER_WDOG_EN IXP23XX_TIMER_REG(0x18)
+#define IXP23XX_TIMER_WDOG_KEY IXP23XX_TIMER_REG(0x1c)
+#define IXP23XX_TIMER_WDOG_KEY_MAGIC 0x482e
+#define IXP23XX_TIMER_STATUS IXP23XX_TIMER_REG(0x20)
+#define IXP23XX_TIMER_SOFT_RESET IXP23XX_TIMER_REG(0x24)
+#define IXP23XX_TIMER_SOFT_RESET_EN IXP23XX_TIMER_REG(0x28)
+
+#define IXP23XX_TIMER_ENABLE (1 << 0)
+#define IXP23XX_TIMER_ONE_SHOT (1 << 1)
+/* Low order bits of reload value ignored */
+#define IXP23XX_TIMER_RELOAD_MASK (0x3)
+#define IXP23XX_TIMER_DISABLED (0x0)
+#define IXP23XX_TIMER1_INT_PEND (1 << 0)
+#define IXP23XX_TIMER2_INT_PEND (1 << 1)
+#define IXP23XX_TIMER_STATUS_TS_PEND (1 << 2)
+#define IXP23XX_TIMER_STATUS_WDOG_PEND (1 << 3)
+#define IXP23XX_TIMER_STATUS_WARM_RESET (1 << 4)
+
+
+/****************************************************************************
+ * CAP CSRs.
+ ****************************************************************************/
+#define IXP23XX_GLOBAL_REG(x) ((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x)))
+#define IXP23XX_PROD_IDG IXP23XX_GLOBAL_REG(0x00)
+#define IXP23XX_MISC_CONTROL IXP23XX_GLOBAL_REG(0x04)
+#define IXP23XX_MSF_CLK_CNTRL IXP23XX_GLOBAL_REG(0x08)
+#define IXP23XX_RESET0 IXP23XX_GLOBAL_REG(0x0c)
+#define IXP23XX_RESET1 IXP23XX_GLOBAL_REG(0x10)
+#define IXP23XX_STRAP_OPTIONS IXP23XX_GLOBAL_REG(0x18)
+
+#define IXP23XX_ENABLE_WATCHDOG (1 << 24)
+#define IXP23XX_SHPC_INIT_COMP (1 << 21)
+#define IXP23XX_RST_ALL (1 << 16)
+#define IXP23XX_RESET_PCI (1 << 2)
+#define IXP23XX_PCI_UNIT_RESET (1 << 1)
+#define IXP23XX_XSCALE_RESET (1 << 0)
+
+
+/****************************************************************************
+ * PCI CSRs.
+ ****************************************************************************/
+#define IXP23XX_PCI_CREG(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x)))
+#define IXP23XX_PCI_CMDSTAT IXP23XX_PCI_CREG(0x04)
+#define IXP23XX_PCI_SRAM_BAR IXP23XX_PCI_CREG(0x14)
+#define IXP23XX_PCI_SDRAM_BAR IXP23XX_PCI_CREG(0x18)
+
+
+#define IXP23XX_PCI_CSR(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x)))
+#define IXP23XX_PCI_OUT_INT_STATUS IXP23XX_PCI_CSR(0x0030)
+#define IXP23XX_PCI_OUT_INT_MASK IXP23XX_PCI_CSR(0x0034)
+#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc)
+#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100)
+#define IXP23XX_PCI_CONTROL IXP23XX_PCI_CSR(0x013c)
+#define IXP23XX_PCI_ADDR_EXT IXP23XX_PCI_CSR(0x0140)
+#define IXP23XX_PCI_ME_PUSH_STATUS IXP23XX_PCI_CSR(0x0148)
+#define IXP23XX_PCI_ME_PUSH_EN IXP23XX_PCI_CSR(0x014c)
+#define IXP23XX_PCI_ERR_STATUS IXP23XX_PCI_CSR(0x0150)
+#define IXP23XX_PCI_ERROR_STATUS IXP23XX_PCI_CSR(0x0150)
+#define IXP23XX_PCI_ERR_ENABLE IXP23XX_PCI_CSR(0x0154)
+#define IXP23XX_PCI_XSCALE_INT_STATUS IXP23XX_PCI_CSR(0x0158)
+#define IXP23XX_PCI_XSCALE_INT_ENABLE IXP23XX_PCI_CSR(0x015c)
+#define IXP23XX_PCI_CPP_ADDR_BITS IXP23XX_PCI_CSR(0x0160)
+
+
+#ifndef __ASSEMBLY__
+/*
+ * Is system memory on the XSI or CPP bus?
+ */
+static inline unsigned ixp23xx_cpp_boot(void)
+{
+ return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
+}
+#endif
+
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/memory.h
+ *
+ * Copyright (c) 2003-2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET (0x00000000)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#ifndef __ASSEMBLY__
+
+#define __virt_to_bus(v) \
+ ({ unsigned int ret; \
+ ret = ((__virt_to_phys(v) - 0x00000000) + \
+ (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); \
+ ret; })
+
+#define __bus_to_virt(b) \
+ ({ unsigned int data; \
+ data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \
+ __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
+
+#endif
+
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct pci_sys_data;
+
+void ixp23xx_map_io(void);
+void ixp23xx_init_irq(void);
+void ixp23xx_sys_init(void);
+int ixp23xx_pci_setup(int, struct pci_sys_data *);
+void ixp23xx_pci_preinit(void);
+struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
+
+extern struct sys_timer ixp23xx_timer;
+
+#define IXP23XX_UART_XTAL 14745600
+
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/system.h
+ *
+ * Copyright (C) 2003 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+ if (!hlt_counter)
+ cpu_do_idle();
+#endif
+}
+
+static inline void arch_reset(char mode)
+{
+ /* First try machine specific support */
+ if (machine_is_ixdp2351()) {
+ *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
+ (void) *IXDP2351_CPLD_RESET1_REG;
+ *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
+ }
+
+ /* Use on-chip reset capability */
+ *IXP23XX_RESET0 |= IXP23XX_RST_ALL;
+}
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/time.h
+ */
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/timex.h
+ *
+ * XScale architecture timex specifications
+ */
+
+#define CLOCK_TICK_RATE 75000000
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/uncompress.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/hardware.h>
+#include <linux/serial_reg.h>
+
+#define UART_BASE ((volatile u32 *)IXP23XX_UART1_PHYS)
+
+static __inline__ void putc(char c)
+{
+ int j;
+
+ for (j = 0; j < 0x1000; j++) {
+ if (UART_BASE[UART_LSR] & UART_LSR_THRE)
+ break;
+ }
+
+ UART_BASE[UART_TX] = c;
+}
+
+static void putstr(const char *s)
+{
+ while (*s) {
+ putc(*s);
+ if (*s == '\n')
+ putc('\r');
+ s++;
+ }
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp23xx/vmalloc.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * NPU mappings end at 0xf0000000 and we allocate 64MB for board
+ * specific static I/O.
+ */
+
+#define VMALLOC_END (0xec000000)
projects / linux-2.6 / commitdiff