#include <linux/interrupt.h>
#include <linux/i2c-pxa.h>
#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/irq.h>
unsigned int slave_addr;
struct i2c_adapter adap;
+ struct clk *clk;
#ifdef CONFIG_I2C_PXA_SLAVE
struct i2c_slave_client *slave;
#endif
sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id);
+ i2c->clk = clk_get(&dev->dev, "I2CCLK");
+ if (IS_ERR(i2c->clk)) {
+ ret = PTR_ERR(i2c->clk);
+ goto eclk;
+ }
+
i2c->reg_base = ioremap(res->start, res_len(res));
if (!i2c->reg_base) {
ret = -EIO;
}
#endif
+ clk_enable(i2c->clk);
+#ifdef CONFIG_PXA27x
switch (dev->id) {
case 0:
-#ifdef CONFIG_PXA27x
pxa_gpio_mode(GPIO117_I2CSCL_MD);
pxa_gpio_mode(GPIO118_I2CSDA_MD);
-#endif
- pxa_set_cken(CKEN_I2C, 1);
break;
-#ifdef CONFIG_PXA27x
case 1:
local_irq_disable();
PCFR |= PCFR_PI2CEN;
local_irq_enable();
- pxa_set_cken(CKEN_PWRI2C, 1);
-#endif
}
+#endif
ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED,
i2c->adap.name, i2c);
eadapt:
free_irq(irq, i2c);
ereqirq:
- switch (dev->id) {
- case 0:
- pxa_set_cken(CKEN_I2C, 0);
- break;
+ clk_disable(i2c->clk);
+
#ifdef CONFIG_PXA27x
- case 1:
- pxa_set_cken(CKEN_PWRI2C, 0);
+ if (dev->id == 1) {
local_irq_disable();
PCFR &= ~PCFR_PI2CEN;
local_irq_enable();
-#endif
}
+#endif
eremap:
+ clk_put(i2c->clk);
+eclk:
kfree(i2c);
emalloc:
release_mem_region(res->start, res_len(res));
i2c_del_adapter(&i2c->adap);
free_irq(i2c->irq, i2c);
- switch (dev->id) {
- case 0:
- pxa_set_cken(CKEN_I2C, 0);
- break;
+
+ clk_disable(i2c->clk);
+ clk_put(i2c->clk);
+
#ifdef CONFIG_PXA27x
- case 1:
- pxa_set_cken(CKEN_PWRI2C, 0);
+ if (dev->id == 1) {
local_irq_disable();
PCFR &= ~PCFR_PI2CEN;
local_irq_enable();
-#endif
}
+#endif
+
release_mem_region(i2c->iobase, i2c->iosize);
kfree(i2c);