e1000: delete non NAPI code from the driver

Compile-tested only.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index 61b171cf5313c9b94c3e4fe185a9ff9edf9b5cbc..2df71861e578b6ebcb2b94371d4a32fbdf7fca61 100644 (file)
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -513,21 +513,11 @@ Additional Configurations
   Intel(R) PRO/1000 PT Dual Port Server Connection
   Intel(R) PRO/1000 PT Dual Port Server Adapter
   Intel(R) PRO/1000 PF Dual Port Server Adapter
-  Intel(R) PRO/1000 PT Quad Port Server Adapter 
+  Intel(R) PRO/1000 PT Quad Port Server Adapter
 
   NAPI
   ----
-  NAPI (Rx polling mode) is supported in the e1000 driver.  NAPI is enabled
-  or disabled based on the configuration of the kernel.  To override
-  the default, use the following compile-time flags.
-
-  To enable NAPI, compile the driver module, passing in a configuration option:
-
-       make CFLAGS_EXTRA=-DE1000_NAPI install
-
-  To disable NAPI, compile the driver module, passing in a configuration option:
-
-       make CFLAGS_EXTRA=-DE1000_NO_NAPI install
+  NAPI (Rx polling mode) is enabled in the e1000 driver.
 
   See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
 

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 32b89b0975ae0483b39fd88b1062f5d2409642d6..fa533c27052a727e757fea2687c1f3bbb93b0346 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1926,20 +1926,6 @@ config E1000
          To compile this driver as a module, choose M here. The module
          will be called e1000.
 
-config E1000_NAPI
-       bool "Use Rx Polling (NAPI)"
-       depends on E1000
-       help
-         NAPI is a new driver API designed to reduce CPU and interrupt load
-         when the driver is receiving lots of packets from the card. It is
-         still somewhat experimental and thus not yet enabled by default.
-
-         If your estimated Rx load is 10kpps or more, or if the card will be
-         deployed on potentially unfriendly networks (e.g. in a firewall),
-         then say Y here.
-
-         If in doubt, say N.
-
 config E1000_DISABLE_PACKET_SPLIT
        bool "Disable Packet Split for PCI express adapters"
        depends on E1000

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 3aeba9305dfa75b0be8e393bcfde9756e1abc4a8..583b823f760ccd36f8e9586bf9eafb4e8167c772 100644 (file)
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -253,9 +253,7 @@ struct e1000_adapter {
        u16 link_speed;
        u16 link_duplex;
        spinlock_t stats_lock;
-#ifdef CONFIG_E1000_NAPI
        spinlock_t tx_queue_lock;
-#endif
        unsigned int total_tx_bytes;
        unsigned int total_tx_packets;
        unsigned int total_rx_bytes;
@@ -293,22 +291,16 @@ struct e1000_adapter {
        bool detect_tx_hung;
 
        /* RX */
-#ifdef CONFIG_E1000_NAPI
        bool (*clean_rx)(struct e1000_adapter *adapter,
                         struct e1000_rx_ring *rx_ring,
                         int *work_done, int work_to_do);
-#else
-       bool (*clean_rx)(struct e1000_adapter *adapter,
-                        struct e1000_rx_ring *rx_ring);
-#endif
        void (*alloc_rx_buf)(struct e1000_adapter *adapter,
                             struct e1000_rx_ring *rx_ring,
                             int cleaned_count);
        struct e1000_rx_ring *rx_ring;      /* One per active queue */
-#ifdef CONFIG_E1000_NAPI
        struct napi_struct napi;
        struct net_device *polling_netdev;  /* One per active queue */
-#endif
+
        int num_tx_queues;
        int num_rx_queues;
 

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index b2c3e4cc0cb455f82526c7002654eda81fecd1ea..190352c6216ee9c69201086c90861a707a6d49c2 100644 (file)
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -31,12 +31,7 @@
 
 char e1000_driver_name[] = "e1000";
 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#ifndef CONFIG_E1000_NAPI
-#define DRIVERNAPI
-#else
-#define DRIVERNAPI "-NAPI"
-#endif
-#define DRV_VERSION "7.3.20-k2"DRIVERNAPI
+#define DRV_VERSION "7.3.20-k3-NAPI"
 const char e1000_driver_version[] = DRV_VERSION;
 static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -138,7 +133,6 @@ static irqreturn_t e1000_intr(int irq, void *data);
 static irqreturn_t e1000_intr_msi(int irq, void *data);
 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
                               struct e1000_tx_ring *tx_ring);
-#ifdef CONFIG_E1000_NAPI
 static int e1000_clean(struct napi_struct *napi, int budget);
 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
                               struct e1000_rx_ring *rx_ring,
@@ -146,12 +140,6 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
                                  struct e1000_rx_ring *rx_ring,
                                  int *work_done, int work_to_do);
-#else
-static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
-                              struct e1000_rx_ring *rx_ring);
-static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
-                                 struct e1000_rx_ring *rx_ring);
-#endif
 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
                                    struct e1000_rx_ring *rx_ring,
                                   int cleaned_count);
@@ -512,9 +500,8 @@ int e1000_up(struct e1000_adapter *adapter)
 
        clear_bit(__E1000_DOWN, &adapter->flags);
 
-#ifdef CONFIG_E1000_NAPI
        napi_enable(&adapter->napi);
-#endif
+
        e1000_irq_enable(adapter);
 
        /* fire a link change interrupt to start the watchdog */
@@ -602,9 +589,8 @@ void e1000_down(struct e1000_adapter *adapter)
         * reschedule our watchdog timer */
        set_bit(__E1000_DOWN, &adapter->flags);
 
-#ifdef CONFIG_E1000_NAPI
        napi_disable(&adapter->napi);
-#endif
+
        e1000_irq_disable(adapter);
 
        del_timer_sync(&adapter->tx_fifo_stall_timer);
@@ -966,9 +952,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
        e1000_set_ethtool_ops(netdev);
        netdev->tx_timeout = &e1000_tx_timeout;
        netdev->watchdog_timeo = 5 * HZ;
-#ifdef CONFIG_E1000_NAPI
        netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
-#endif
        netdev->vlan_rx_register = e1000_vlan_rx_register;
        netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
        netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
@@ -1207,16 +1191,12 @@ err_eeprom:
        if (hw->flash_address)
                iounmap(hw->flash_address);
 err_flashmap:
-#ifdef CONFIG_E1000_NAPI
        for (i = 0; i < adapter->num_rx_queues; i++)
                dev_put(&adapter->polling_netdev[i]);
-#endif
 
        kfree(adapter->tx_ring);
        kfree(adapter->rx_ring);
-#ifdef CONFIG_E1000_NAPI
        kfree(adapter->polling_netdev);
-#endif
 err_sw_init:
        iounmap(hw->hw_addr);
 err_ioremap:
@@ -1244,9 +1224,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
        struct net_device *netdev = pci_get_drvdata(pdev);
        struct e1000_adapter *adapter = netdev_priv(netdev);
        struct e1000_hw *hw = &adapter->hw;
-#ifdef CONFIG_E1000_NAPI
        int i;
-#endif
 
        cancel_work_sync(&adapter->reset_task);
 
@@ -1256,10 +1234,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
         * would have already happened in close and is redundant. */
        e1000_release_hw_control(adapter);
 
-#ifdef CONFIG_E1000_NAPI
        for (i = 0; i < adapter->num_rx_queues; i++)
                dev_put(&adapter->polling_netdev[i]);
-#endif
 
        unregister_netdev(netdev);
 
@@ -1268,9 +1244,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 
        kfree(adapter->tx_ring);
        kfree(adapter->rx_ring);
-#ifdef CONFIG_E1000_NAPI
        kfree(adapter->polling_netdev);
-#endif
 
        iounmap(hw->hw_addr);
        if (hw->flash_address)
@@ -1296,9 +1270,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
        struct e1000_hw *hw = &adapter->hw;
        struct net_device *netdev = adapter->netdev;
        struct pci_dev *pdev = adapter->pdev;
-#ifdef CONFIG_E1000_NAPI
        int i;
-#endif
 
        /* PCI config space info */
 
@@ -1356,14 +1328,12 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
                return -ENOMEM;
        }
 
-#ifdef CONFIG_E1000_NAPI
        for (i = 0; i < adapter->num_rx_queues; i++) {
                adapter->polling_netdev[i].priv = adapter;
                dev_hold(&adapter->polling_netdev[i]);
                set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
        }
        spin_lock_init(&adapter->tx_queue_lock);
-#endif
 
        /* Explicitly disable IRQ since the NIC can be in any state. */
        e1000_irq_disable(adapter);
@@ -1398,7 +1368,6 @@ static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
                return -ENOMEM;
        }
 
-#ifdef CONFIG_E1000_NAPI
        adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
                                          sizeof(struct net_device),
                                          GFP_KERNEL);
@@ -1407,7 +1376,6 @@ static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
                kfree(adapter->rx_ring);
                return -ENOMEM;
        }
-#endif
 
        return E1000_SUCCESS;
 }
@@ -1472,9 +1440,7 @@ static int e1000_open(struct net_device *netdev)
        /* From here on the code is the same as e1000_up() */
        clear_bit(__E1000_DOWN, &adapter->flags);
 
-#ifdef CONFIG_E1000_NAPI
        napi_enable(&adapter->napi);
-#endif
 
        e1000_irq_enable(adapter);
 
@@ -2069,11 +2035,9 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
                ctrl_ext = er32(CTRL_EXT);
                /* Reset delay timers after every interrupt */
                ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
-#ifdef CONFIG_E1000_NAPI
                /* Auto-Mask interrupts upon ICR access */
                ctrl_ext |= E1000_CTRL_EXT_IAME;
                ew32(IAM, 0xffffffff);
-#endif
                ew32(CTRL_EXT, ctrl_ext);
                E1000_WRITE_FLUSH();
        }
@@ -3777,9 +3741,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
        struct net_device *netdev = data;
        struct e1000_adapter *adapter = netdev_priv(netdev);
        struct e1000_hw *hw = &adapter->hw;
-#ifndef CONFIG_E1000_NAPI
-       int i;
-#endif
        u32 icr = er32(ICR);
 
        /* in NAPI mode read ICR disables interrupts using IAM */
@@ -3800,7 +3761,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
                        mod_timer(&adapter->watchdog_timer, jiffies + 1);
        }
 
-#ifdef CONFIG_E1000_NAPI
        if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
                adapter->total_tx_bytes = 0;
                adapter->total_tx_packets = 0;
@@ -3809,20 +3769,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
                __netif_rx_schedule(netdev, &adapter->napi);
        } else
                e1000_irq_enable(adapter);
-#else
-       adapter->total_tx_bytes = 0;
-       adapter->total_rx_bytes = 0;
-       adapter->total_tx_packets = 0;
-       adapter->total_rx_packets = 0;
-
-       for (i = 0; i < E1000_MAX_INTR; i++)
-               if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
-                  !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
-                       break;
-
-       if (likely(adapter->itr_setting & 3))
-               e1000_set_itr(adapter);
-#endif
 
        return IRQ_HANDLED;
 }
@@ -3839,13 +3785,10 @@ static irqreturn_t e1000_intr(int irq, void *data)
        struct e1000_adapter *adapter = netdev_priv(netdev);
        struct e1000_hw *hw = &adapter->hw;
        u32 rctl, icr = er32(ICR);
-#ifndef CONFIG_E1000_NAPI
-       int i;
-#endif
+
        if (unlikely(!icr))
                return IRQ_NONE;  /* Not our interrupt */
 
-#ifdef CONFIG_E1000_NAPI
        /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
         * not set, then the adapter didn't send an interrupt */
        if (unlikely(hw->mac_type >= e1000_82571 &&
@@ -3854,7 +3797,6 @@ static irqreturn_t e1000_intr(int irq, void *data)
 
        /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked.  No
         * need for the IMC write */
-#endif
 
        if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
                hw->get_link_status = 1;
@@ -3874,7 +3816,6 @@ static irqreturn_t e1000_intr(int irq, void *data)
                        mod_timer(&adapter->watchdog_timer, jiffies + 1);
        }
 
-#ifdef CONFIG_E1000_NAPI
        if (unlikely(hw->mac_type < e1000_82571)) {
                /* disable interrupts, without the synchronize_irq bit */
                ew32(IMC, ~0);
@@ -3890,46 +3831,14 @@ static irqreturn_t e1000_intr(int irq, void *data)
                /* this really should not happen! if it does it is basically a
                 * bug, but not a hard error, so enable ints and continue */
                e1000_irq_enable(adapter);
-#else
-       /* Writing IMC and IMS is needed for 82547.
-        * Due to Hub Link bus being occupied, an interrupt
-        * de-assertion message is not able to be sent.
-        * When an interrupt assertion message is generated later,
-        * two messages are re-ordered and sent out.
-        * That causes APIC to think 82547 is in de-assertion
-        * state, while 82547 is in assertion state, resulting
-        * in dead lock. Writing IMC forces 82547 into
-        * de-assertion state.
-        */
-       if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
-               ew32(IMC, ~0);
-
-       adapter->total_tx_bytes = 0;
-       adapter->total_rx_bytes = 0;
-       adapter->total_tx_packets = 0;
-       adapter->total_rx_packets = 0;
-
-       for (i = 0; i < E1000_MAX_INTR; i++)
-               if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
-                  !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
-                       break;
 
-       if (likely(adapter->itr_setting & 3))
-               e1000_set_itr(adapter);
-
-       if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
-               e1000_irq_enable(adapter);
-
-#endif
        return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_E1000_NAPI
 /**
  * e1000_clean - NAPI Rx polling callback
  * @adapter: board private structure
  **/
-
 static int e1000_clean(struct napi_struct *napi, int budget)
 {
        struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
@@ -3966,12 +3875,10 @@ static int e1000_clean(struct napi_struct *napi, int budget)
        return work_done;
 }
 
-#endif
 /**
  * e1000_clean_tx_irq - Reclaim resources after transmit completes
  * @adapter: board private structure
  **/
-
 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
                               struct e1000_tx_ring *tx_ring)
 {
@@ -3980,9 +3887,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
        struct e1000_tx_desc *tx_desc, *eop_desc;
        struct e1000_buffer *buffer_info;
        unsigned int i, eop;
-#ifdef CONFIG_E1000_NAPI
        unsigned int count = 0;
-#endif
        bool cleaned = false;
        unsigned int total_tx_bytes=0, total_tx_packets=0;
 
@@ -4014,11 +3919,10 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 
                eop = tx_ring->buffer_info[i].next_to_watch;
                eop_desc = E1000_TX_DESC(*tx_ring, eop);
-#ifdef CONFIG_E1000_NAPI
 #define E1000_TX_WEIGHT 64
                /* weight of a sort for tx, to avoid endless transmit cleanup */
-               if (count++ == E1000_TX_WEIGHT) break;
-#endif
+               if (count++ == E1000_TX_WEIGHT)
+                       break;
        }
 
        tx_ring->next_to_clean = i;
@@ -4131,14 +4035,9 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
  * e1000_clean_rx_irq - Send received data up the network stack; legacy
  * @adapter: board private structure
  **/
-#ifdef CONFIG_E1000_NAPI
 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
                               struct e1000_rx_ring *rx_ring,
                               int *work_done, int work_to_do)
-#else
-static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
-                              struct e1000_rx_ring *rx_ring)
-#endif
 {
        struct e1000_hw *hw = &adapter->hw;
        struct net_device *netdev = adapter->netdev;
@@ -4161,11 +4060,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
                struct sk_buff *skb;
                u8 status;
 
-#ifdef CONFIG_E1000_NAPI
                if (*work_done >= work_to_do)
                        break;
                (*work_done)++;
-#endif
+
                status = rx_desc->status;
                skb = buffer_info->skb;
                buffer_info->skb = NULL;
@@ -4251,7 +4149,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
                                  le16_to_cpu(rx_desc->csum), skb);
 
                skb->protocol = eth_type_trans(skb, netdev);
-#ifdef CONFIG_E1000_NAPI
+
                if (unlikely(adapter->vlgrp &&
                            (status & E1000_RXD_STAT_VP))) {
                        vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
@@ -4259,15 +4157,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
                } else {
                        netif_receive_skb(skb);
                }
-#else /* CONFIG_E1000_NAPI */
-               if (unlikely(adapter->vlgrp &&
-                           (status & E1000_RXD_STAT_VP))) {
-                       vlan_hwaccel_rx(skb, adapter->vlgrp,
-                                       le16_to_cpu(rx_desc->special));
-               } else {
-                       netif_rx(skb);
-               }
-#endif /* CONFIG_E1000_NAPI */
+
                netdev->last_rx = jiffies;
 
 next_desc:
@@ -4301,14 +4191,9 @@ next_desc:
  * @adapter: board private structure
  **/
 
-#ifdef CONFIG_E1000_NAPI
 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
                                  struct e1000_rx_ring *rx_ring,
                                  int *work_done, int work_to_do)
-#else
-static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
-                                 struct e1000_rx_ring *rx_ring)
-#endif
 {
        union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
        struct net_device *netdev = adapter->netdev;
@@ -4331,11 +4216,11 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
        while (staterr & E1000_RXD_STAT_DD) {
                ps_page = &rx_ring->ps_page[i];
                ps_page_dma = &rx_ring->ps_page_dma[i];
-#ifdef CONFIG_E1000_NAPI
+
                if (unlikely(*work_done >= work_to_do))
                        break;
                (*work_done)++;
-#endif
+
                skb = buffer_info->skb;
 
                /* in the packet split case this is header only */
@@ -4437,21 +4322,14 @@ copydone:
                if (likely(rx_desc->wb.upper.header_status &
                           cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
                        adapter->rx_hdr_split++;
-#ifdef CONFIG_E1000_NAPI
+
                if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
                        vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
                                le16_to_cpu(rx_desc->wb.middle.vlan));
                } else {
                        netif_receive_skb(skb);
                }
-#else /* CONFIG_E1000_NAPI */
-               if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
-                       vlan_hwaccel_rx(skb, adapter->vlgrp,
-                               le16_to_cpu(rx_desc->wb.middle.vlan));
-               } else {
-                       netif_rx(skb);
-               }
-#endif /* CONFIG_E1000_NAPI */
+
                netdev->last_rx = jiffies;
 
 next_desc:
@@ -5218,9 +5096,6 @@ static void e1000_netpoll(struct net_device *netdev)
 
        disable_irq(adapter->pdev->irq);
        e1000_intr(adapter->pdev->irq, netdev);
-#ifndef CONFIG_E1000_NAPI
-       adapter->clean_rx(adapter, adapter->rx_ring);
-#endif
        enable_irq(adapter->pdev->irq);
 }
 #endif