]> err.no Git - linux-2.6/commitdiff
[TG3]: Eliminate spurious interrupts.
authorMichael Chan <mchan@broadcom.com>
Mon, 7 May 2007 07:26:15 +0000 (00:26 -0700)
committerDavid S. Miller <davem@davemloft.net>
Mon, 7 May 2007 07:26:15 +0000 (00:26 -0700)
Spurious interrupts are often encountered especially on systems
using the 8259 PIC mode.  This is because the I/O write to deassert
the interrupt is posted and won't get to the chip immediately.  As
a result, the IRQ may remain asserted after the IRQ handler exits,
causing spurious interrupts.

Flush the interrupt mailbox in non-MSI handlers to de-assert the
IRQ immediately.  This seems to be the most straight forward approach
after discussion with Jeff Garzik and David Miller.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/tg3.c

index 630c8a6c9f738126fe1adc50da079a9cad520491..6f849bd5a7e7c41c50850fce85a56bd3131c78b4 100644 (file)
@@ -3590,8 +3590,12 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id)
         * Writing non-zero to intr-mbox-0 additional tells the
         * NIC to stop sending us irqs, engaging "in-intr-handler"
         * event coalescing.
+        *
+        * Flush the mailbox to de-assert the IRQ immediately to prevent
+        * spurious interrupts.  The flush impacts performance but
+        * excessive spurious interrupts can be worse in some cases.
         */
-       tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
+       tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
        if (tg3_irq_sync(tp))
                goto out;
        sblk->status &= ~SD_STATUS_UPDATED;
@@ -3635,8 +3639,12 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id)
         * writing non-zero to intr-mbox-0 additional tells the
         * NIC to stop sending us irqs, engaging "in-intr-handler"
         * event coalescing.
+        *
+        * Flush the mailbox to de-assert the IRQ immediately to prevent
+        * spurious interrupts.  The flush impacts performance but
+        * excessive spurious interrupts can be worse in some cases.
         */
-       tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
+       tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
        if (tg3_irq_sync(tp))
                goto out;
        if (netif_rx_schedule_prep(dev)) {