[PATCH] ARM: 2790/1: Properly terminate plat_serial8250_port arrays on ixdp425 and

	coyote

Patch from Stefan Sorensen

On the ixdp425 and coyote platforms, the plat_serial8250_port arrays are
missing the terminating entry required by serial8250_probe.

Signed-off-by: Stefan Sorensen <ssoe@kirktelecom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index c6335f51907dbd0481591df2628eacd34e165480..4ff4393ef0ea681fcd0eca14fdae6bee00f03e35 100644 (file)
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -56,21 +56,24 @@ static struct resource coyote_uart_resource = {
        .flags  = IORESOURCE_MEM,
 };
 
-static struct plat_serial8250_port coyote_uart_data = {
-       .mapbase        = IXP4XX_UART2_BASE_PHYS,
-       .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-       .irq            = IRQ_IXP4XX_UART2,
-       .flags          = UPF_BOOT_AUTOCONF,
-       .iotype         = UPIO_MEM,
-       .regshift       = 2,
-       .uartclk        = IXP4XX_UART_XTAL,
+static struct plat_serial8250_port coyote_uart_data[] = {
+       {
+               .mapbase        = IXP4XX_UART2_BASE_PHYS,
+               .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+               .irq            = IRQ_IXP4XX_UART2,
+               .flags          = UPF_BOOT_AUTOCONF,
+               .iotype         = UPIO_MEM,
+               .regshift       = 2,
+               .uartclk        = IXP4XX_UART_XTAL,
+       },
+       { },
 };
 
 static struct platform_device coyote_uart = {
        .name           = "serial8250",
        .id             = 0,
        .dev                    = {
-               .platform_data  = &coyote_uart_data,
+               .platform_data  = coyote_uart_data,
        },
        .num_resources  = 1,
        .resource       = &coyote_uart_resource,
@@ -87,10 +90,10 @@ static void __init coyote_init(void)
        *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 
        if (machine_is_ixdpg425()) {
-               coyote_uart_data.membase =
+               coyote_uart_data[0].membase =
                        (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET);
-               coyote_uart_data.mapbase = IXP4XX_UART1_BASE_PHYS;
-               coyote_uart_data.irq = IRQ_IXP4XX_UART1;
+               coyote_uart_data[0].mapbase = IXP4XX_UART1_BASE_PHYS;
+               coyote_uart_data[0].irq = IRQ_IXP4XX_UART1;
        }
 
 

diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index f2e9c0ea05019405b1ba868fa7d2f3ae5c164f70..c2ba759e994611116101bb6719ed84d6bc069227 100644 (file)
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -95,7 +95,8 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
                .iotype         = UPIO_MEM,
                .regshift       = 2,
                .uartclk        = IXP4XX_UART_XTAL,
-       }
+       },
+       { },
 };
 
 static struct platform_device ixdp425_uart = {