V4L/DVB (7262): Add support for xc3028-based boards

This patch adds support for the following saa7134 xc3028 based boards:
132 -> AVerMedia Cardbus TV/Radio (E506R)       [1461:f436]
133 -> AVerMedia Hybrid TV/Radio (A16D)         [1461:f936]
134 -> Avermedia M115                           [1461:a836]
135 -> Compro VideoMate T750                    [185b:c900]

This is based on a original patch thanks to Markus Rechberger that added xc3028
gpio init code for the above boards.

This patch moves saa7134_tuner_callback to saa7134-cards, originally used only
by tda8290 DVB-S boards. The callback was made more generic to support other
tuners.

Currently, it supports both tda8290 and xc2028/xc3028 tuners. Added also the
basis for xc5000 tuner callback.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 765a06b1f0f62383262c96d1ac664e8f57fcbfb0..c1f9f138d1bb4dfd4af976129456771b7bc329a6 100644 (file)
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -134,3 +134,7 @@
 133 -> NXP Snake DVB-S reference design
 134 -> Medion/Creatix CTX953 Hybrid             [16be:0010]
 135 -> MSI TV@nywhere A/D v1.1                  [1462:8625]
+136 -> AVerMedia Cardbus TV/Radio (E506R)       [1461:f436]
+137 -> AVerMedia Hybrid TV/Radio (A16D)         [1461:f936]
+138 -> Avermedia M115                           [1461:a836]
+139 -> Compro VideoMate T750                    [185b:c900]

diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index f9c85b7cba1a61bb39e3851933879902df570ebb..6fde042ee317e255de0425fc484614ddedd07085 100644 (file)
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -22,9 +22,12 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
 
 #include "saa7134-reg.h"
 #include "saa7134.h"
+#include "tuner-xc2028.h"
 #include <media/v4l2-common.h>
 #include <media/tveeprom.h>
 
@@ -4064,6 +4067,97 @@ struct saa7134_board saa7134_boards[] = {
                        .gpio   = 0x0200000,
                },
        },
+       [SAA7134_BOARD_AVERMEDIA_CARDBUS_506] = {
+                .name           = "AVerMedia Cardbus TV/Radio (E506R)",
+                .audio_clock    = 0x187de7,
+                .tuner_type     = TUNER_XC2028,
+                /*
+                   TODO:
+                .mpeg           = SAA7134_MPEG_DVB,
+                */
+
+                .inputs         = {{
+                        .name = name_tv,
+                        .vmux = 1,
+                        .amux = TV,
+                        .tv   = 1,
+                }, {
+                        .name = name_comp1,
+                        .vmux = 3,
+                        .amux = LINE2,
+                }, {
+                        .name = name_svideo,
+                        .vmux = 8,
+                        .amux = LINE1,
+                } },
+                .radio = {
+                        .name = name_radio,
+                        .amux = TV,
+                },
+       },
+       [SAA7134_BOARD_AVERMEDIA_A16D] = {
+               .name           = "AVerMedia Hybrid TV/Radio (A16D)",
+               .audio_clock    = 0x187de7,
+               .tuner_type     = TUNER_XC2028,
+               .inputs         = {{
+                       .name = name_tv,
+                       .vmux = 1,
+                       .amux = TV,
+                       .tv   = 1,
+               }, {
+                       .name = name_svideo,
+                       .vmux = 8,
+                       .amux = LINE1,
+               } },
+               .radio = {
+                       .name = name_radio,
+                       .amux = LINE1,
+               },
+       },
+       [SAA7134_BOARD_AVERMEDIA_M115] = {
+               .name           = "Avermedia M115",
+               .audio_clock    = 0x187de7,
+               .tuner_type     = TUNER_XC2028,
+               .inputs         = {{
+                       .name = name_tv,
+                       .vmux = 1,
+                       .amux = TV,
+                       .tv   = 1,
+               }, {
+                       .name = name_comp1,
+                       .vmux = 3,
+                       .amux = LINE1,
+               }, {
+                       .name = name_svideo,
+                       .vmux = 8,
+                       .amux = LINE2,
+               } },
+       },
+       [SAA7134_BOARD_VIDEOMATE_T750] = {
+               /* John Newbigin <jn@it.swin.edu.au> */
+               .name           = "Compro VideoMate T750",
+               .audio_clock    = 0x00187de7,
+               .tuner_type     = TUNER_XC2028,
+               .mpeg           = SAA7134_MPEG_DVB,
+               .inputs = {{
+                       .name   = name_tv,
+                       .vmux   = 3,
+                       .amux   = TV,
+                       .tv     = 1,
+               }, {
+                       .name   = name_comp1,
+                       .vmux   = 1,
+                       .amux   = LINE2,
+               }, {
+                       .name   = name_svideo,
+                       .vmux   = 8,
+                       .amux   = LINE2,
+               } },
+               .radio = {
+                       .name = name_radio,
+                       .amux = TV,
+               }
+       }
 };
 
 const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -5027,6 +5121,30 @@ struct pci_device_id saa7134_pci_tbl[] = {
                .subdevice    = 0x8625, /* TV@nywhere A/D v1.1 */
                .driver_data  = SAA7134_BOARD_MSI_TVANYWHERE_AD11,
        },{
+               .vendor       = PCI_VENDOR_ID_PHILIPS,
+               .device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+               .subvendor    = 0x1461, /* Avermedia Technologies Inc */
+               .subdevice    = 0xf436,
+               .driver_data  = SAA7134_BOARD_AVERMEDIA_CARDBUS_506,
+       }, {
+               .vendor       = PCI_VENDOR_ID_PHILIPS,
+               .device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+               .subvendor    = 0x1461, /* Avermedia Technologies Inc */
+               .subdevice    = 0xf936,
+               .driver_data  = SAA7134_BOARD_AVERMEDIA_A16D,
+       }, {
+               .vendor       = PCI_VENDOR_ID_PHILIPS,
+               .device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+               .subvendor    = 0x1461, /* Avermedia Technologies Inc */
+               .subdevice    = 0xa836,
+               .driver_data  = SAA7134_BOARD_AVERMEDIA_M115,
+       }, {
+               .vendor       = PCI_VENDOR_ID_PHILIPS,
+               .device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+               .subvendor    = 0x185b,
+               .subdevice    = 0xc900,
+               .driver_data  = SAA7134_BOARD_VIDEOMATE_T750,
+       }, {
                /* --- boards without eeprom + subsystem ID --- */
                .vendor       = PCI_VENDOR_ID_PHILIPS,
                .device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -5082,6 +5200,67 @@ static void board_flyvideo(struct saa7134_dev *dev)
               dev->name, dev->name, dev->name);
 }
 
+static int saa7134_xc2028_callback(struct saa7134_dev *dev,
+                                  int command, int arg)
+{
+       switch (command) {
+       case XC2028_TUNER_RESET:
+               saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000);
+               saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000);
+               saa_andorl(SAA7133_ANALOG_IO_SELECT >> 2, 0x02, 0x02);
+               saa_andorl(SAA7134_ANALOG_IN_CTRL1 >> 2, 0x81, 0x81);
+               saa_andorl(SAA7134_AUDIO_CLOCK0 >> 2, 0x03187de7, 0x03187de7);
+               saa_andorl(SAA7134_AUDIO_PLL_CTRL >> 2, 0x03, 0x03);
+               saa_andorl(SAA7134_AUDIO_CLOCKS_PER_FIELD0 >> 2,
+                          0x0001e000, 0x0001e000);
+               return 0;
+       }
+       return -EINVAL;
+}
+
+
+static int saa7134_tda8290_callback(struct saa7134_dev *dev,
+                                   int command, int arg)
+{
+       u8 sync_control;
+
+       switch (command) {
+       case 0: /* switch LNA gain through GPIO 22*/
+               saa7134_set_gpio(dev, 22, arg) ;
+               break;
+       case 1: /* vsync output at GPIO22. 50 / 60Hz */
+               saa_andorb(SAA7134_VIDEO_PORT_CTRL3, 0x80, 0x80);
+               saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x03);
+               if (arg == 1)
+                       sync_control = 11;
+               else
+                       sync_control = 17;
+               saa_writeb(SAA7134_VGATE_START, sync_control);
+               saa_writeb(SAA7134_VGATE_STOP, sync_control + 1);
+               saa_andorb(SAA7134_MISC_VGATE_MSB, 0x03, 0x00);
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+int saa7134_tuner_callback(void *priv, int command, int arg)
+{
+       struct i2c_algo_bit_data *i2c_algo = priv;
+       struct saa7134_dev *dev = i2c_algo->data;
+
+       switch (dev->tuner_type) {
+       case TUNER_PHILIPS_TDA8290:
+               return saa7134_tda8290_callback(dev, command, arg);
+       case TUNER_XC2028:
+               return saa7134_xc2028_callback(dev, command, arg);
+       }
+       return -EINVAL;
+}
+EXPORT_SYMBOL(saa7134_tuner_callback);
+
 /* ----------------------------------------------------------- */
 
 static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data)
@@ -5151,6 +5330,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
        case SAA7134_BOARD_VIDEOMATE_DVBT_300:
        case SAA7134_BOARD_VIDEOMATE_DVBT_200:
        case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
+       case SAA7134_BOARD_VIDEOMATE_T750:
        case SAA7134_BOARD_MANLI_MTV001:
        case SAA7134_BOARD_MANLI_MTV002:
        case SAA7134_BOARD_BEHOLD_409FM:
@@ -5217,6 +5397,8 @@ int saa7134_board_init1(struct saa7134_dev *dev)
                saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08000000, 0x00000000);
                break;
        case SAA7134_BOARD_AVERMEDIA_CARDBUS:
+       case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+       case SAA7134_BOARD_AVERMEDIA_M115:
        case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
                /* power-up tuner chip */
                saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0xffffffff, 0xffffffff);
@@ -5284,11 +5466,16 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                dev->tuner_type = saa7134_boards[dev->board].tuner_type;
 
                if (TUNER_ABSENT != dev->tuner_type) {
-                               tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
-                               tun_setup.type = dev->tuner_type;
-                               tun_setup.addr = ADDR_UNSET;
+                       tun_setup.mode_mask = T_RADIO     |
+                                             T_ANALOG_TV |
+                                             T_DIGITAL_TV;
+                       tun_setup.type = dev->tuner_type;
+                       tun_setup.addr = ADDR_UNSET;
+                       tun_setup.tuner_callback = saa7134_tuner_callback;
 
-                               saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+                       saa7134_i2c_call_clients(dev,
+                                                TUNER_SET_TYPE_ADDR,
+                                                &tun_setup);
                }
                break;
        case SAA7134_BOARD_MD7134:
@@ -5359,11 +5546,14 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                                                 &tda9887_cfg);
                }
 
-               tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
+               tun_setup.mode_mask = T_RADIO     |
+                                     T_ANALOG_TV |
+                                     T_DIGITAL_TV;
                tun_setup.type = dev->tuner_type;
                tun_setup.addr = ADDR_UNSET;
 
-               saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup);
+               saa7134_i2c_call_clients(dev,
+                                        TUNER_SET_TYPE_ADDR, &tun_setup);
                }
                break;
        case SAA7134_BOARD_PHILIPS_EUROPA:
@@ -5496,12 +5686,26 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                }
                break;
        }
+
+       if (dev->tuner_type == TUNER_XC2028) {
+               struct v4l2_priv_tun_config  xc2028_cfg;
+               struct xc2028_ctrl           ctl;
+
+               memset(&xc2028_cfg, 0, sizeof(ctl));
+               memset(&ctl, 0, sizeof(ctl));
+
+               ctl.fname   = XC2028_DEFAULT_FIRMWARE;
+               ctl.max_len = 64;
+
+               /* FIXME: This should be device-dependent */
+               ctl.demod = XC3028_FE_OREN538;
+               ctl.mts = 1;
+
+               xc2028_cfg.tuner = TUNER_XC2028;
+               xc2028_cfg.priv  = &ctl;
+
+               saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
+       }
+
        return 0;
 }
-
-/* ----------------------------------------------------------- */
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */

diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 4817a0e046a8bd9f468193b00099857a68ac0233..ed96ce775a9bfd6ff32f56e864c25b696e4c515d 100644 (file)
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -142,40 +142,6 @@ void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value)
        }
 }
 
-int saa7134_tuner_callback(void *ptr, int command, int arg)
-{
-       u8 sync_control;
-       struct i2c_algo_bit_data *i2c_algo = priv;
-       struct saa7134_dev *dev = i2c_algo->data;
-
-       switch (dev->tuner_type) {
-       case TUNER_PHILIPS_TDA8290:
-               switch (command) {
-               case 0: /* switch LNA gain through GPIO 22*/
-                       saa7134_set_gpio(dev, 22, arg) ;
-                       break;
-               case 1: /* vsync output at GPIO22. 50 / 60Hz */
-                       dprintk("setting GPIO22 to vsync %d\n", arg);
-                       saa_andorb(SAA7134_VIDEO_PORT_CTRL3, 0x80, 0x80);
-                       saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x03);
-                       if (arg == 1)
-                               sync_control = 11;
-                       else
-                               sync_control = 17;
-                       saa_writeb(SAA7134_VGATE_START, sync_control);
-                       saa_writeb(SAA7134_VGATE_STOP, sync_control + 1);
-                       saa_andorb(SAA7134_MISC_VGATE_MSB, 0x03, 0x00);
-                       break;
-               default:
-                       return -EINVAL;
-               }
-               break;
-       default:
-               return -ENODEV;
-       }
-       return 0;
-}
-
 /* ------------------------------------------------------------------ */
 
 

diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index eabc67d03b2cdd13140cdaad61d5c2994a632c4f..97d9178dca2befb27605c6fb8e3cf5536c38737e 100644 (file)
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -38,6 +38,7 @@
 #include "mt352_priv.h" /* FIXME */
 #include "tda1004x.h"
 #include "nxt200x.h"
+#include "tuner-xc2028.h"
 
 #include "tda10086.h"
 #include "tda826x.h"
@@ -190,6 +191,11 @@ static struct mt352_config avermedia_777 = {
        .demod_init    = mt352_aver777_init,
 };
 
+static struct mt352_config avermedia_e506r_mt352_dev = {
+       .demod_address   = (0x1e >> 1),
+       .no_tuner        = 1,
+};
+
 /* ==================================================================
  * tda1004x based DVB-T cards, helper functions
  */
@@ -895,6 +901,8 @@ static struct nxt200x_config kworldatsc110 = {
 static int dvb_init(struct saa7134_dev *dev)
 {
        int ret;
+       int attach_xc3028 = 0;
+
        /* init struct videobuf_dvb */
        dev->ts.nr_bufs    = 32;
        dev->ts.nr_packets = 32*4;
@@ -1142,11 +1150,35 @@ static int dvb_init(struct saa7134_dev *dev)
        case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
                configure_tda827x_fe(dev, &philips_tiger_s_config);
                break;
+       case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+               dev->dvb.frontend = dvb_attach(mt352_attach,
+                                              &avermedia_e506r_mt352_dev,
+                                              &dev->i2c_adap);
+               attach_xc3028 = 1;
+               break;
        default:
                wprintk("Huh? unknown DVB card?\n");
                break;
        }
 
+       if (attach_xc3028) {
+               struct dvb_frontend *fe;
+               struct xc2028_config cfg = {
+                       .i2c_adap  = &dev->i2c_adap,
+                       .i2c_addr  = 0x61,
+                       .video_dev = dev,
+               };
+               fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg);
+               if (!fe) {
+                       printk(KERN_ERR "%s/2: xc3028 attach failed\n",
+                              dev->name);
+                       dvb_frontend_detach(dev->dvb.frontend);
+                       dvb_unregister_frontend(dev->dvb.frontend);
+                       dev->dvb.frontend = NULL;
+                       return -1;
+               }
+       }
+
        if (NULL == dev->dvb.frontend) {
                printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name);
                return -1;

diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index d7e0781fe8a15eb5121909318d91d28beb02c864..ba88a1093d142b7ef9309998bba9e444f6a85f4c 100644 (file)
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -257,6 +257,11 @@ struct saa7134_format {
 #define SAA7134_BOARD_PHILIPS_SNAKE        133
 #define SAA7134_BOARD_CREATIX_CTX953       134
 #define SAA7134_BOARD_MSI_TVANYWHERE_AD11  135
+#define SAA7134_BOARD_AVERMEDIA_CARDBUS_506 136
+#define SAA7134_BOARD_AVERMEDIA_A16D       137
+#define SAA7134_BOARD_AVERMEDIA_M115       138
+#define SAA7134_BOARD_VIDEOMATE_T750       139
+
 
 #define SAA7134_MAXBOARDS 8
 #define SAA7134_INPUT_MAX 8
@@ -599,7 +604,6 @@ extern int saa7134_no_overlay;
 
 void saa7134_track_gpio(struct saa7134_dev *dev, char *msg);
 void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value);
-int saa7134_tuner_callback(void *ptr, int command, int arg);
 
 #define SAA7134_PGTABLE_SIZE 4096
 
@@ -636,6 +640,7 @@ extern struct pci_device_id __devinitdata saa7134_pci_tbl[];
 
 extern int saa7134_board_init1(struct saa7134_dev *dev);
 extern int saa7134_board_init2(struct saa7134_dev *dev);
+int saa7134_tuner_callback(void *priv, int command, int arg);
 
 
 /* ----------------------------------------------------------- */