[ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB)

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index d64b40c8e422828b3b169240d53d10c83fd2e615..7e5578509c0277dc2e395a1eefb4b9d74c8f94b1 100644 (file)
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -196,6 +196,11 @@ config MACH_LITTLETON
        select PXA3xx
        select PXA_SSP
 
+config MACH_TAVOREVB
+       bool "PXA930 Evaluation Board (aka TavorEVB)"
+       select PXA3xx
+       select PXA930
+
 config MACH_ARMCORE
        bool "CompuLab CM-X270 modules"
        select PXA27x

diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index d04014e67c0872e29ac553cac1848db97b78b941..24b20bc9dd6d18caa5cd4969c239877a02a4c49e 100644 (file)
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -50,6 +50,7 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-$(CONFIG_CPU_PXA320)     += zylonite_pxa320.o
 endif
 obj-$(CONFIG_MACH_LITTLETON)   += littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)    += tavorevb.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o

diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
new file mode 100644 (file)
index 0000000..ac28350
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb.c
+ *
+ *  Support for the Marvell PXA930 Evaluation Board
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Tavor EVB MFP configurations */
+static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
+       /* Ethernet */
+       DF_nCS1_nCS3,
+       GPIO47_GPIO,
+};
+
+#define TAVOREVB_ETH_PHYS      (0x14000000)
+
+static struct resource smc91x_resources[] = {
+       [0] = {
+               .start  = (TAVOREVB_ETH_PHYS + 0x300),
+               .end    = (TAVOREVB_ETH_PHYS + 0xfffff),
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+               .end    = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+               .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+       }
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+       .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+       .name           = "smc91x",
+       .id             = 0,
+       .num_resources  = ARRAY_SIZE(smc91x_resources),
+       .resource       = smc91x_resources,
+       .dev            = {
+               .platform_data = &tavorevb_smc91x_info,
+       },
+};
+
+static void __init tavorevb_init(void)
+{
+       /* initialize MFP configurations */
+       pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+
+       platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
+       /* Maintainer: Eric Miao <eric.miao@marvell.com> */
+       .phys_io        = 0x40000000,
+       .boot_params    = 0xa0000100,
+       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+       .map_io         = pxa_map_io,
+       .init_irq       = pxa3xx_init_irq,
+       .timer          = &pxa_timer,
+       .init_machine   = tavorevb_init,
+MACHINE_END