tristate "M68k Beeper support"
depends on M68K
+config INPUT_IXP4XX_BEEPER
+ tristate "IXP4XX Beeper support"
+ depends on ARCH_IXP4XX
+ help
+ If you say yes here, you can connect a beeper to the
+ ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ixp4xx-beeper.
+
config INPUT_COBALT_BTNS
tristate "Cobalt button interface"
depends on MIPS_COBALT
To compile this driver as a module, choose M here: the module will
be called atlas_btns.
-config INPUT_IXP4XX_BEEPER
- tristate "IXP4XX Beeper support"
- depends on ARCH_IXP4XX
+config INPUT_ATI_REMOTE
+ tristate "ATI / X10 USB RF remote control"
+ select USB
help
- If you say yes here, you can connect a beeper to the
- ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+ Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
+ These are RF remotes with USB receivers.
+ The ATI remote comes with many of ATI's All-In-Wonder video cards.
+ The X10 "Lola" remote is available at:
+ <http://www.x10.com/products/lola_sg1.htm>
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ati_remote.
+
+config INPUT_ATI_REMOTE2
+ tristate "ATI / Philips USB RF remote control"
+ select USB
+ help
+ Say Y here if you want to use an ATI or Philips USB RF remote control.
+ These are RF remotes with USB receivers.
+ ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
+ and is also available as a separate product.
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ati_remote2.
+
+config INPUT_KEYSPAN_REMOTE
+ tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select USB
+ help
+ Say Y here if you want to use a Keyspan DMR USB remote control.
+ Currently only the UIA-11 type of receiver has been tested. The tag
+ on the receiver that connects to the USB port should have a P/N that
+ will tell you what type of DMR you have. The UIA-10 type is not
+ supported at this time. This driver maps all buttons to keypress
+ events.
- If unsure, say Y.
+ To compile this driver as a module, choose M here: the module will
+ be called keyspan_remote.
+
+config INPUT_POWERMATE
+ tristate "Griffin PowerMate and Contour Jog support"
+ select USB
+ help
+ Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
+ These are aluminum dials which can measure clockwise and anticlockwise
+ rotation. The dial also acts as a pushbutton. The base contains an LED
+ which can be instructed to pulse or to switch to a particular intensity.
+
+ You can download userspace tools from
+ <http://sowerbutts.com/powermate/>.
To compile this driver as a module, choose M here: the
- module will be called ixp4xx-beeper.
+ module will be called powermate.
+
+config INPUT_YEALINK
+ tristate "Yealink usb-p1k voip phone"
+ depends EXPERIMENTAL
+ select USB
+ help
+ Say Y here if you want to enable keyboard and LCD functions of the
+ Yealink usb-p1k usb phones. The audio part is enabled by the generic
+ usb sound driver, so you might want to enable that as well.
+
+ For information about how to use these additional functions, see
+ <file:Documentation/input/yealink.txt>.
+
+ To compile this driver as a module, choose M here: the module will be
+ called yealink.
config INPUT_UINPUT
tristate "User level driver support"
obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
-obj-$(CONFIG_INPUT_UINPUT) += uinput.o
+obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
+obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o
+obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
+obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
+obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
+obj-$(CONFIG_INPUT_YEALINK) += yealink.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
-obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
+obj-$(CONFIG_INPUT_UINPUT) += uinput.o
* This driver is based on:
* - the usbb2k-api http://savannah.nongnu.org/projects/usbb2k-api/
* - information from http://memeteau.free.fr/usbb2k
- * - the xpad-driver drivers/usb/input/xpad.c
+ * - the xpad-driver drivers/input/joystick/xpad.c
*
* Thanks to:
* - Olivier Vandorpe, for providing the usbb2k-api.
source "drivers/usb/storage/Kconfig"
-source "drivers/usb/input/Kconfig"
-
source "drivers/usb/image/Kconfig"
source "drivers/usb/net/Kconfig"
obj-$(CONFIG_USB_STORAGE) += storage/
obj-$(CONFIG_USB) += storage/
-obj-$(CONFIG_USB_ATI_REMOTE) += input/
-obj-$(CONFIG_USB_POWERMATE) += input/
-
obj-$(CONFIG_USB_CATC) += net/
obj-$(CONFIG_USB_KAWETH) += net/
obj-$(CONFIG_USB_PEGASUS) += net/
+++ /dev/null
-#
-# USB Input driver configuration
-#
-comment "USB Input Devices"
- depends on USB
-
-config USB_POWERMATE
- tristate "Griffin PowerMate and Contour Jog support"
- depends on USB && INPUT
- ---help---
- Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
- These are aluminum dials which can measure clockwise and anticlockwise
- rotation. The dial also acts as a pushbutton. The base contains an LED
- which can be instructed to pulse or to switch to a particular intensity.
-
- You can download userspace tools from
- <http://sowerbutts.com/powermate/>.
-
- To compile this driver as a module, choose M here: the
- module will be called powermate.
-
-config USB_YEALINK
- tristate "Yealink usb-p1k voip phone"
- depends on USB && INPUT && EXPERIMENTAL
- ---help---
- Say Y here if you want to enable keyboard and LCD functions of the
- Yealink usb-p1k usb phones. The audio part is enabled by the generic
- usb sound driver, so you might want to enable that as well.
-
- For information about how to use these additional functions, see
- <file:Documentation/input/yealink.txt>.
-
- To compile this driver as a module, choose M here: the module will be
- called yealink.
-
-config USB_ATI_REMOTE
- tristate "ATI / X10 USB RF remote control"
- depends on USB && INPUT
- ---help---
- Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
- These are RF remotes with USB receivers.
- The ATI remote comes with many of ATI's All-In-Wonder video cards.
- The X10 "Lola" remote is available at:
- <http://www.x10.com/products/lola_sg1.htm>
- This driver provides mouse pointer, left and right mouse buttons,
- and maps all the other remote buttons to keypress events.
-
- To compile this driver as a module, choose M here: the module will be
- called ati_remote.
-
-config USB_ATI_REMOTE2
- tristate "ATI / Philips USB RF remote control"
- depends on USB && INPUT
- ---help---
- Say Y here if you want to use an ATI or Philips USB RF remote control.
- These are RF remotes with USB receivers.
- ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
- and is also available as a separate product.
- This driver provides mouse pointer, left and right mouse buttons,
- and maps all the other remote buttons to keypress events.
-
- To compile this driver as a module, choose M here: the module will be
- called ati_remote2.
-
-config USB_KEYSPAN_REMOTE
- tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
- depends on USB && INPUT && EXPERIMENTAL
- ---help---
- Say Y here if you want to use a Keyspan DMR USB remote control.
- Currently only the UIA-11 type of receiver has been tested. The tag
- on the receiver that connects to the USB port should have a P/N that
- will tell you what type of DMR you have. The UIA-10 type is not
- supported at this time. This driver maps all buttons to keypress
- events.
-
- To compile this driver as a module, choose M here: the module will
- be called keyspan_remote.
+++ /dev/null
-#
-# Makefile for the USB input drivers
-#
-
-obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o
-obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o
-obj-$(CONFIG_USB_KEYSPAN_REMOTE) += keyspan_remote.o
-obj-$(CONFIG_USB_POWERMATE) += powermate.o
-obj-$(CONFIG_USB_YEALINK) += yealink.o
-
-ifeq ($(CONFIG_USB_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
projects / linux-2.6 / commitdiff