};
+ g) Freescale SOC SEC Security Engines
+
+ Required properties:
+
+ - device_type : Should be "crypto"
+ - model : Model of the device. Should be "SEC1" or "SEC2"
+ - compatible : Should be "talitos"
+ - reg : Offset and length of the register set for the device
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - num-channels : An integer representing the number of channels
+ available.
+ - channel-fifo-len : An integer representing the number of
+ descriptor pointers each channel fetch fifo can hold.
+ - exec-units-mask : The bitmask representing what execution units
+ (EUs) are available. It's a single 32 bit cell. EU information
+ should be encoded following the SEC's Descriptor Header Dword
+ EU_SEL0 field documentation, i.e. as follows:
+
+ bit 0 = reserved - should be 0
+ bit 1 = set if SEC has the ARC4 EU (AFEU)
+ bit 2 = set if SEC has the DES/3DES EU (DEU)
+ bit 3 = set if SEC has the message digest EU (MDEU)
+ bit 4 = set if SEC has the random number generator EU (RNG)
+ bit 5 = set if SEC has the public key EU (PKEU)
+ bit 6 = set if SEC has the AES EU (AESU)
+ bit 7 = set if SEC has the Kasumi EU (KEU)
+
+ bits 8 through 31 are reserved for future SEC EUs.
+
+ - descriptor-types-mask : The bitmask representing what descriptors
+ are available. It's a single 32 bit cell. Descriptor type
+ information should be encoded following the SEC's Descriptor
+ Header Dword DESC_TYPE field documentation, i.e. as follows:
+
+ bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type
+ bit 1 = set if SEC supports the ipsec_esp descriptor type
+ bit 2 = set if SEC supports the common_nonsnoop desc. type
+ bit 3 = set if SEC supports the 802.11i AES ccmp desc. type
+ bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type
+ bit 5 = set if SEC supports the srtp descriptor type
+ bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type
+ bit 7 = set if SEC supports the pkeu_assemble descriptor type
+ bit 8 = set if SEC supports the aesu_key_expand_output desc.type
+ bit 9 = set if SEC supports the pkeu_ptmul descriptor type
+ bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type
+ bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type
+
+ ..and so on and so forth.
+
+ Example:
+
+ /* MPC8548E */
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <30000 10000>;
+ interrupts = <1d 3>;
+ interrupt-parent = <40000>;
+ num-channels = <4>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <000000fe>;
+ descriptor-types-mask = <073f1127>;
+ };
+
+
More devices will be defined as this spec matures.