]> err.no Git - linux-2.6/commitdiff
ARM: OMAP: FB sync with N800 tree (support for dynamic SRAM allocations)
authorImre Deak <imre.deak@solidboot.com>
Tue, 6 Mar 2007 11:16:36 +0000 (03:16 -0800)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Wed, 9 May 2007 09:39:14 +0000 (10:39 +0100)
- in addition to fixed FB regions - as passed by the bootloader -
  allow dynamic allocations
- do some more checking against overlapping / reserved regions
- move the FB specific parts out from sram.c to fb.c

Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-omap1/io.c
arch/arm/mach-omap2/io.c
arch/arm/plat-omap/fb.c
arch/arm/plat-omap/sram.c
include/asm-arm/arch-omap/sram.h

index fab8b0b27cfbca4dd4c0a809dca6637369a0bcbc..81c4e738506c865430c27534755cde6780d01a19 100644 (file)
 #include <asm/io.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
-#include <asm/arch/omapfb.h>
 
 extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
 extern void omap_sram_init(void);
+extern void omapfb_reserve_sdram(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -121,7 +121,7 @@ void __init omap1_map_common_io(void)
 #endif
 
        omap_sram_init();
-       omapfb_reserve_mem();
+       omapfb_reserve_sdram();
 }
 
 /*
index 59458642e9eb61d1755475135a256543623c5d5f..82dc70f6b7795652829a01fa5a1c360ca1fc9cae 100644 (file)
@@ -27,6 +27,7 @@ extern void omap_sram_init(void);
 extern int omap2_clk_init(void);
 extern void omap2_check_revision(void);
 extern void gpmc_init(void);
+extern void omapfb_reserve_sdram(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -72,7 +73,7 @@ void __init omap2_map_common_io(void)
 
        omap2_check_revision();
        omap_sram_init();
-       omapfb_reserve_mem();
+       omapfb_reserve_sdram();
 }
 
 void __init omap2_init_common_hw(void)
index a302d9194f572f6f93d5e38c555817fac92e5aeb..469f580ca057c184424698534ee916f8ed95499d 100644 (file)
@@ -39,6 +39,8 @@
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
 static struct omapfb_platform_data omapfb_config;
+static int config_invalid;
+static int configured_regions;
 
 static u64 omap_fb_dma_mask = ~(u32)0;
 
@@ -53,46 +55,246 @@ static struct platform_device omap_fb_device = {
        .num_resources = 0,
 };
 
-/* called from map_io */
-void omapfb_reserve_mem(void)
+static inline int ranges_overlap(unsigned long start1, unsigned long size1,
+                                unsigned long start2, unsigned long size2)
 {
-       const struct omap_fbmem_config *fbmem_conf;
-       unsigned long total_size;
+       return (start1 >= start2 && start1 < start2 + size2) ||
+              (start2 >= start1 && start2 < start1 + size1);
+}
+
+static inline int range_included(unsigned long start1, unsigned long size1,
+                                unsigned long start2, unsigned long size2)
+{
+       return start1 >= start2 && start1 + size1 <= start2 + size2;
+}
+
+
+/* Check if there is an overlapping region. */
+static int fbmem_region_reserved(unsigned long start, size_t size)
+{
+       struct omapfb_mem_region *rg;
        int i;
 
-       if (!omap_fb_sram_valid) {
-               /* FBMEM SRAM configuration was already found to be invalid.
-                * Ignore the whole configuration block. */
-               omapfb_config.mem_desc.region_cnt = 0;
-               return;
+       rg = &omapfb_config.mem_desc.region[0];
+       for (i = 0; i < OMAPFB_PLANE_NUM; i++, rg++) {
+               if (!rg->paddr)
+                       /* Empty slot. */
+                       continue;
+               if (ranges_overlap(start, size, rg->paddr, rg->size))
+                       return 1;
        }
+       return 0;
+}
 
-       i = 0;
-       total_size = 0;
-       while ((fbmem_conf = omap_get_nr_config(OMAP_TAG_FBMEM,
-                               struct omap_fbmem_config, i)) != NULL) {
-               unsigned long start;
-               unsigned long size;
+/*
+ * Get the region_idx`th region from board config/ATAG and convert it to
+ * our internal format.
+ */
+static int get_fbmem_region(int region_idx, struct omapfb_mem_region *rg)
+{
+       const struct omap_fbmem_config  *conf;
+       u32                             paddr;
 
-               if (i == OMAPFB_PLANE_NUM) {
-                       printk(KERN_ERR "ignoring extra plane info\n");
+       conf = omap_get_nr_config(OMAP_TAG_FBMEM,
+                                 struct omap_fbmem_config, region_idx);
+       if (conf == NULL)
+               return -ENOENT;
+
+       paddr = conf->start;
+       /*
+        * Low bits encode the page allocation mode, if high bits
+        * are zero. Otherwise we need a page aligned fixed
+        * address.
+        */
+       memset(rg, 0, sizeof(*rg));
+       rg->type = paddr & ~PAGE_MASK;
+       rg->paddr = paddr & PAGE_MASK;
+       rg->size = PAGE_ALIGN(conf->size);
+       return 0;
+}
+
+static int set_fbmem_region_type(struct omapfb_mem_region *rg, int mem_type,
+                                 unsigned long mem_start,
+                                 unsigned long mem_size)
+{
+       /*
+        * Check if the configuration specifies the type explicitly.
+        * type = 0 && paddr = 0, a default don't care case maps to
+        * the SDRAM type.
+        */
+       if (rg->type || (!rg->type && !rg->paddr))
+               return 0;
+       if (ranges_overlap(rg->paddr, rg->size, mem_start, mem_size)) {
+               rg->type = mem_type;
+               return 0;
+       }
+       /* Can't determine it. */
+       return -1;
+}
+
+static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg,
+                             unsigned long start_avail, unsigned size_avail)
+{
+       unsigned long   paddr = rg->paddr;
+       size_t          size = rg->size;
+
+       if (rg->type > OMAPFB_MEMTYPE_MAX) {
+               printk(KERN_ERR
+                       "Invalid start address for FB region %d\n", region_idx);
+               return -EINVAL;
+       }
+
+       if (!rg->size) {
+               printk(KERN_ERR "Zero size for FB region %d\n", region_idx);
+               return -EINVAL;
+       }
+
+       if (!paddr)
+               /* Allocate this dynamically, leave paddr 0 for now. */
+               return 0;
+
+       /*
+        * Fixed region for the given RAM range. Check if it's already
+        * reserved by the FB code or someone else.
+        */
+       if (fbmem_region_reserved(paddr, size) ||
+           !range_included(paddr, size, start_avail, size_avail)) {
+               printk(KERN_ERR "Trying to use reserved memory "
+                       "for FB region %d\n", region_idx);
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+/*
+ * Called from map_io. We need to call to this early enough so that we
+ * can reserve the fixed SDRAM regions before VM could get hold of them.
+ */
+void omapfb_reserve_sdram(void)
+{
+       struct bootmem_data     *bdata;
+       unsigned long           sdram_start, sdram_size;
+       unsigned long           reserved;
+       int                     i;
+
+       if (config_invalid)
+               return;
+
+       bdata = NODE_DATA(0)->bdata;
+       sdram_start = bdata->node_boot_start;
+       sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
+       reserved = 0;
+       for (i = 0; ; i++) {
+               struct omapfb_mem_region        rg;
+
+               if (get_fbmem_region(i, &rg) < 0)
                        break;
+               if (i == OMAPFB_PLANE_NUM) {
+                       printk(KERN_ERR
+                               "Extraneous FB mem configuration entries\n");
+                       config_invalid = 1;
+                       return;
                }
-               start = fbmem_conf->start;
-               size  = fbmem_conf->size;
-               omapfb_config.mem_desc.region[i].paddr = start;
-               omapfb_config.mem_desc.region[i].size = size;
-               if (omap_fb_sram_plane != i && start) {
-                       reserve_bootmem(start, size);
-                       total_size += size;
+               /* Check if it's our memory type. */
+               if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SDRAM,
+                                         sdram_start, sdram_size) < 0 ||
+                   (rg.type != OMAPFB_MEMTYPE_SDRAM))
+                       continue;
+               BUG_ON(omapfb_config.mem_desc.region[i].size);
+               if (check_fbmem_region(i, &rg, sdram_start, sdram_size) < 0) {
+                       config_invalid = 1;
+                       return;
                }
-               i++;
+               if (rg.paddr)
+                       reserve_bootmem(rg.paddr, rg.size);
+               reserved += rg.size;
+               omapfb_config.mem_desc.region[i] = rg;
+               configured_regions++;
        }
        omapfb_config.mem_desc.region_cnt = i;
-       if (total_size)
+       if (reserved)
                pr_info("Reserving %lu bytes SDRAM for frame buffer\n",
-                        total_size);
+                        reserved);
+}
+
+/*
+ * Called at sram init time, before anything is pushed to the SRAM stack.
+ * Because of the stack scheme, we will allocate everything from the
+ * start of the lowest address region to the end of SRAM. This will also
+ * include padding for page alignment and possible holes between regions.
+ *
+ * As opposed to the SDRAM case, we'll also do any dynamic allocations at
+ * this point, since the driver built as a module would have problem with
+ * freeing / reallocating the regions.
+ */
+unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+                                 unsigned long sram_vstart,
+                                 unsigned long sram_size,
+                                 unsigned long pstart_avail,
+                                 unsigned long size_avail)
+{
+       struct omapfb_mem_region        rg;
+       unsigned long                   pend_avail;
+       unsigned long                   reserved;
+       int                             i;
+
+       if (config_invalid)
+               return 0;
+
+       reserved = 0;
+       pend_avail = pstart_avail + size_avail;
+       for (i = 0; ; i++) {
+               if (get_fbmem_region(i, &rg) < 0)
+                       break;
+               if (i == OMAPFB_PLANE_NUM) {
+                       printk(KERN_ERR
+                               "Extraneous FB mem configuration entries\n");
+                       config_invalid = 1;
+                       return 0;
+               }
 
+               /* Check if it's our memory type. */
+               if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SRAM,
+                                         sram_pstart, sram_size) < 0 ||
+                   (rg.type != OMAPFB_MEMTYPE_SRAM))
+                       continue;
+               BUG_ON(omapfb_config.mem_desc.region[i].size);
+
+               if (check_fbmem_region(i, &rg, pstart_avail, size_avail) < 0) {
+                       config_invalid = 1;
+                       return 0;
+               }
+
+               if (!rg.paddr) {
+                       /* Dynamic allocation */
+                       if ((size_avail & PAGE_MASK) < rg.size) {
+                               printk("Not enough SRAM for FB region %d\n",
+                                       i);
+                               config_invalid = 1;
+                               return 0;
+                       }
+                       size_avail = (size_avail - rg.size) & PAGE_MASK;
+                       rg.paddr = pstart_avail + size_avail;
+               }
+               /* Reserve everything above the start of the region. */
+               if (pend_avail - rg.paddr > reserved)
+                       reserved = pend_avail - rg.paddr;
+               size_avail = pend_avail - reserved - pstart_avail;
+
+               /*
+                * We have a kernel mapping for this already, so the
+                * driver won't have to make one.
+                */
+               rg.vaddr = (void *)(sram_vstart + rg.paddr - sram_pstart);
+               omapfb_config.mem_desc.region[i] = rg;
+               configured_regions++;
+       }
+       omapfb_config.mem_desc.region_cnt = i;
+       if (reserved)
+               pr_info("Reserving %lu bytes SRAM for frame buffer\n",
+                        reserved);
+       return reserved;
 }
 
 void omapfb_set_ctrl_platform_data(void *data)
@@ -104,10 +306,19 @@ static inline int omap_init_fb(void)
 {
        const struct omap_lcd_config *conf;
 
+       if (config_invalid)
+               return 0;
+       if (configured_regions != omapfb_config.mem_desc.region_cnt) {
+               printk(KERN_ERR "Invalid FB mem configuration entries\n");
+               return 0;
+       }
        conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
-       if (conf == NULL)
+       if (conf == NULL) {
+               if (configured_regions)
+                       /* FB mem config, but no LCD config? */
+                       printk(KERN_ERR "Missing LCD configuration\n");
                return 0;
-
+       }
        omapfb_config.lcd = *conf;
 
        return platform_device_register(&omap_fb_device);
@@ -117,7 +328,13 @@ arch_initcall(omap_init_fb);
 
 #else
 
-void omapfb_reserve_mem(void) {}
+void omapfb_reserve_sdram(void) {}
+unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+                                 unsigned long sram_vstart,
+                                 unsigned long sram_size,
+                                 unsigned long start_avail,
+                                 unsigned long size_avail) {}
+
 
 #endif
 
index 7e5f8877e05191c69d226d9a6a117be1b0b9da33..bc46f33aede3dc5bc9ebe9394bde2183faa126ed 100644 (file)
@@ -51,10 +51,14 @@ static unsigned long omap_sram_base;
 static unsigned long omap_sram_size;
 static unsigned long omap_sram_ceil;
 
-int    omap_fb_sram_plane = -1;
-int    omap_fb_sram_valid;
+extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+                                        unsigned long sram_vstart,
+                                        unsigned long sram_size,
+                                        unsigned long pstart_avail,
+                                        unsigned long size_avail);
 
-/* Depending on the target RAMFS firewall setup, the public usable amount of
+/*
+ * Depending on the target RAMFS firewall setup, the public usable amount of
  * SRAM varies.  The default accessable size for all device types is 2k. A GP
  * device allows ARM11 but not other initators for full size. This
  * functionality seems ok until some nice security API happens.
@@ -78,45 +82,6 @@ static int is_sram_locked(void)
                return 1; /* assume locked with no PPA or security driver */
 }
 
-static int get_fb_sram_conf(unsigned long start_avail, unsigned size_avail,
-                             unsigned long *start, int *plane_idx)
-{
-       const struct omap_fbmem_config *fbmem_conf;
-       unsigned long size = 0;
-       int i;
-
-       i = 0;
-       *start = 0;
-       *plane_idx = -1;
-       while ((fbmem_conf = omap_get_nr_config(OMAP_TAG_FBMEM,
-                               struct omap_fbmem_config, i)) != NULL) {
-               u32 paddr, end;
-
-               paddr = fbmem_conf->start;
-               end = fbmem_conf->start + fbmem_conf->size;
-               if (paddr > omap_sram_start &&
-                   paddr < omap_sram_start + omap_sram_size) {
-                       if (*plane_idx != -1 || paddr < start_avail ||
-                           paddr == end ||
-                           end > start_avail + size_avail) {
-                               printk(KERN_ERR "invalid FB SRAM configuration");
-                               *start = 0;
-                               return -1;
-                       }
-                       *plane_idx = i;
-                       *start = fbmem_conf->start;
-                       size = fbmem_conf->size;
-               }
-               i++;
-       }
-
-       if (*plane_idx >= 0)
-               pr_info("Reserving %lu bytes SRAM frame buffer "
-                       "for plane %d\n", size, *plane_idx);
-
-       return 0;
-}
-
 /*
  * The amount of SRAM depends on the core type.
  * Note that we cannot try to test for SRAM here because writes
@@ -125,7 +90,7 @@ static int get_fb_sram_conf(unsigned long start_avail, unsigned size_avail,
  */
 void __init omap_detect_sram(void)
 {
-       unsigned long fb_sram_start;
+       unsigned long reserved;
 
        if (cpu_is_omap24xx()) {
                if (is_sram_locked()) {
@@ -158,13 +123,11 @@ void __init omap_detect_sram(void)
                        omap_sram_size = 0x4000;
                }
        }
-       if (get_fb_sram_conf(omap_sram_start + SRAM_BOOTLOADER_SZ,
-                           omap_sram_size - SRAM_BOOTLOADER_SZ,
-                           &fb_sram_start, &omap_fb_sram_plane) == 0)
-               omap_fb_sram_valid = 1;
-       if (omap_fb_sram_valid && omap_fb_sram_plane >= 0)
-               omap_sram_size -= omap_sram_start + omap_sram_size -
-                                 fb_sram_start;
+       reserved = omapfb_reserve_sram(omap_sram_start, omap_sram_base,
+                                      omap_sram_size,
+                                      omap_sram_start + SRAM_BOOTLOADER_SZ,
+                                      omap_sram_size - SRAM_BOOTLOADER_SZ);
+       omap_sram_size -= reserved;
        omap_sram_ceil = omap_sram_base + omap_sram_size;
 }
 
index cc6161d639881c5d311a0036c15b9176bfe6306e..bb9bb3fd532f7c88e715db8fe4ddf48f4507844e 100644 (file)
@@ -20,9 +20,6 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
                                      u32 mem_type);
 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
-extern int omap_fb_sram_plane;
-extern int omap_fb_sram_valid;
-
 /* Do not use these */
 extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
 extern unsigned long sram_reprogram_clock_sz;