return 0;
}
-static int philips_fmd1216_pll_init(struct dvb_frontend *fe)
-{
- struct cx8802_dev *dev= fe->dvb->priv;
-
- /* this message is to set up ATC and ALC */
- static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 };
- struct i2c_msg msg =
- { .addr = dev->core->pll_addr, .flags = 0,
- .buf = fmd1216_init, .len = sizeof(fmd1216_init) };
- int err;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) {
- if (err < 0)
- return err;
- else
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
-static int dntv_live_dvbt_pro_tuner_set_params(struct dvb_frontend* fe,
- struct dvb_frontend_parameters* params)
-{
- struct cx8802_dev *dev= fe->dvb->priv;
- u8 buf[4];
- struct i2c_msg msg =
- { .addr = dev->core->pll_addr, .flags = 0,
- .buf = buf, .len = 4 };
- int err;
-
- /* Switch PLL to DVB mode */
- err = philips_fmd1216_pll_init(fe);
- if (err)
- return err;
-
- /* Tune PLL */
- dvb_pll_configure(dev->core->pll_desc, buf, params);
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) {
-
- printk(KERN_WARNING "cx88-dvb: %s error "
- "(addr %02x <- %02x, err = %i)\n",
- __FUNCTION__, dev->core->pll_addr, buf[0], err);
- if (err < 0)
- return err;
- else
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
static struct mt352_config dntv_live_dvbt_pro_config = {
.demod_address = 0x0f,
.no_tuner = 1,
break;
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
#if defined(CONFIG_VIDEO_CX88_VP3054) || (defined(CONFIG_VIDEO_CX88_VP3054_MODULE) && defined(MODULE))
- dev->core->pll_addr = 0x61;
- dev->core->pll_desc = &dvb_pll_fmd1216me;
dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
&((struct vp3054_i2c_state *)dev->card_priv)->adap);
if (dev->dvb.frontend != NULL) {
- dev->dvb.frontend->ops.tuner_ops.set_params = dntv_live_dvbt_pro_tuner_set_params;
+ dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
+ &dev->core->i2c_adap, &dvb_pll_fmd1216me);
}
#else
printk("%s: built without vp3054 support\n", dev->core->name);
/* ------------------------------------------------------------------ */
-static int philips_fmd1216_tuner_init(struct dvb_frontend *fe)
-{
- struct saa7134_dev *dev = fe->dvb->priv;
- struct tda1004x_state *state = fe->demodulator_priv;
- u8 addr = state->config->tuner_address;
- /* this message is to set up ATC and ALC */
- static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 };
- struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
- return -EIO;
- msleep(1);
-
- return 0;
-}
-
-static int philips_fmd1216_tuner_sleep(struct dvb_frontend *fe)
-{
- struct saa7134_dev *dev = fe->dvb->priv;
- struct tda1004x_state *state = fe->demodulator_priv;
- u8 addr = state->config->tuner_address;
- /* this message actually turns the tuner back to analog mode */
- u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0x60 };
- struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
- msleep(1);
- fmd1216_init[2] = 0x86;
- fmd1216_init[3] = 0x54;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
- msleep(1);
- return 0;
-}
-
-static int philips_fmd1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
- struct saa7134_dev *dev = fe->dvb->priv;
- struct tda1004x_state *state = fe->demodulator_priv;
- u8 addr = state->config->tuner_address;
- u8 tuner_buf[4];
- struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
- sizeof(tuner_buf) };
- int tuner_frequency = 0;
- int divider = 0;
- u8 band, mode, cp;
-
- /* determine charge pump */
- tuner_frequency = params->frequency + 36130000;
- if (tuner_frequency < 87000000)
- return -EINVAL;
- /* low band */
- else if (tuner_frequency < 180000000) {
- band = 1;
- mode = 7;
- cp = 0;
- } else if (tuner_frequency < 195000000) {
- band = 1;
- mode = 6;
- cp = 1;
- /* mid band */
- } else if (tuner_frequency < 366000000) {
- if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
- band = 10;
- } else {
- band = 2;
- }
- mode = 7;
- cp = 0;
- } else if (tuner_frequency < 478000000) {
- if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
- band = 10;
- } else {
- band = 2;
- }
- mode = 6;
- cp = 1;
- /* high band */
- } else if (tuner_frequency < 662000000) {
- if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
- band = 12;
- } else {
- band = 4;
- }
- mode = 7;
- cp = 0;
- } else if (tuner_frequency < 840000000) {
- if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
- band = 12;
- } else {
- band = 4;
- }
- mode = 6;
- cp = 1;
- } else {
- if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
- band = 12;
- } else {
- band = 4;
- }
- mode = 7;
- cp = 1;
-
- }
- /* calculate divisor */
- /* ((36166000 + Finput) / 166666) rounded! */
- divider = (tuner_frequency + 83333) / 166667;
-
- /* setup tuner buffer */
- tuner_buf[0] = (divider >> 8) & 0x7f;
- tuner_buf[1] = divider & 0xff;
- tuner_buf[2] = 0x80 | (cp << 6) | (mode << 3) | 4;
- tuner_buf[3] = 0x40 | band;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
- wprintk("could not write to tuner at addr: 0x%02x\n",
- addr << 1);
- return -EIO;
- }
- return 0;
-}
-
static struct tda1004x_config medion_cardbus = {
.demod_address = 0x08,
.invert = 1,
&medion_cardbus,
&dev->i2c_adap);
if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_fmd1216_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = philips_fmd1216_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_fmd1216_tuner_set_params;
+ dvb_attach(dvb_pll_attach, dev->dvb.frontend, medion_cardbus.tuner_address,
+ &dev->i2c_adap, &dvb_pll_fmd1216me);
}
break;
case SAA7134_BOARD_PHILIPS_TOUGH:
if (dev->dvb.frontend) {
dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
- dev->dvb.frontend->ops.tuner_ops.init = philips_fmd1216_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = philips_fmd1216_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_fmd1216_tuner_set_params;
+
+ dvb_attach(dvb_pll_attach, dev->dvb.frontend, medion_cardbus.tuner_address,
+ &dev->i2c_adap, &dvb_pll_fmd1216me);
}
break;
case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
projects / linux-2.6 / commitdiff