if (time_after(jiffies, max_jiffies)) {
printk(KERN_ERR "%s: timeout. reg=%#06x "
"mask=%#06x val=%#06x\n",
- __FUNCTION__, w, mask, val);
+ __func__, w, mask, val);
return -1;
}
c++;
}
omap_uwire_configure_mode(spi->chip_select, flags);
pr_debug("%s: uwire flags %02x, armxor %lu KHz, SCK %lu KHz\n",
- __FUNCTION__, flags,
+ __func__, flags,
clk_get_rate(uwire->ck) / 1000,
rate / 1000);
status = 0;
return retval;
dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
- __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
+ __func__, spi->mode & (SPI_CPOL | SPI_CPHA),
spi->bits_per_word, 2 * cs->nsecs);
/* NOTE we _need_ to call chipselect() early, ideally with adapter
return retval;
dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
- __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
+ __func__, spi->mode & (SPI_CPOL | SPI_CPHA),
spi->bits_per_word, 2 * mpc83xx_spi->nsecs);
/* NOTE we _need_ to call chipselect() early, ideally with adapter
}
dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n",
- __FUNCTION__, spi->mode, spi->bits_per_word,
+ __func__, spi->mode, spi->bits_per_word,
spi->max_speed_hz);
return 0;
hz = (t) ? t->speed_hz : spi->max_speed_hz;
if (bits_per_word != 8) {
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
- __FUNCTION__, bits_per_word);
+ __func__, bits_per_word);
return -EINVAL;
}
if (hz && xspi->speed_hz > hz) {
dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n",
- __FUNCTION__, hz);
+ __func__, hz);
return -EINVAL;
}
if (spi->mode & ~MODEBITS) {
dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
- __FUNCTION__, spi->mode & ~MODEBITS);
+ __func__, spi->mode & ~MODEBITS);
return -EINVAL;
}
return retval;
dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
- __FUNCTION__, spi->mode & MODEBITS, spi->bits_per_word, 0);
+ __func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
return 0;
}