]> err.no Git - linux-2.6/commitdiff
[SCSI] mvsas: Add Marvell 6440 SAS/SATA driver
authorJeff Garzik <jeff@garzik.org>
Fri, 26 Oct 2007 00:58:22 +0000 (20:58 -0400)
committerJames Bottomley <James.Bottomley@HansenPartnership.com>
Sat, 23 Feb 2008 13:29:31 +0000 (07:29 -0600)
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
drivers/scsi/Kconfig
drivers/scsi/Makefile
drivers/scsi/mvsas.c [new file with mode: 0644]

index a7a0813b24cbda64f11f72c1617d5ed0b8700454..c46666a248099491901e0ed971cb45ef86cabecf 100644 (file)
@@ -992,6 +992,16 @@ config SCSI_IZIP_SLOW_CTR
 
          Generally, saying N is fine.
 
+config SCSI_MVSAS
+       tristate "Marvell 88SE6440 SAS/SATA support"
+       depends on PCI && SCSI
+       select SCSI_SAS_LIBSAS
+       help
+         This driver supports Marvell SAS/SATA PCI devices.
+
+         To compiler this driver as a module, choose M here: the module
+         will be called mvsas.
+
 config SCSI_NCR53C406A
        tristate "NCR53c406a SCSI support"
        depends on ISA && SCSI
index 925c26b4fff910069810c17d86cac850e3f16a2b..23e6ecbd47780bcc59a0042727e710065306b7b5 100644 (file)
@@ -119,6 +119,7 @@ obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/
 obj-$(CONFIG_SCSI_IBMVSCSIS)   += ibmvscsi/
 obj-$(CONFIG_SCSI_HPTIOP)      += hptiop.o
 obj-$(CONFIG_SCSI_STEX)                += stex.o
+obj-$(CONFIG_SCSI_MVSAS)       += mvsas.o
 obj-$(CONFIG_PS3_ROM)          += ps3rom.o
 
 obj-$(CONFIG_ARM)              += arm/
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
new file mode 100644 (file)
index 0000000..03638b9
--- /dev/null
@@ -0,0 +1,1825 @@
+/*
+       mvsas.c - Marvell 88SE6440 SAS/SATA support
+
+       Copyright 2007 Red Hat, Inc.
+
+       This program is free software; you can redistribute it and/or
+       modify it under the terms of the GNU General Public License as
+       published by the Free Software Foundation; either version 2,
+       or (at your option) any later version.
+
+       This program is distributed in the hope that it will be useful,
+       but WITHOUT ANY WARRANTY; without even the implied warranty
+       of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+       See the GNU General Public License for more details.
+
+       You should have received a copy of the GNU General Public
+       License along with this program; see the file COPYING.  If not,
+       write to the Free Software Foundation, 675 Mass Ave, Cambridge,
+       MA 02139, USA.
+
+       ---------------------------------------------------------------
+
+       Random notes:
+       * hardware supports controlling the endian-ness of data
+         structures.  this permits elimination of all the le32_to_cpu()
+         and cpu_to_le32() conversions.
+
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <scsi/libsas.h>
+#include <asm/io.h>
+
+#define DRV_NAME "mvsas"
+#define DRV_VERSION "0.1"
+
+#define mr32(reg)      readl(regs + MVS_##reg)
+#define mw32(reg,val)  writel((val), regs + MVS_##reg)
+#define mw32_f(reg,val)        do {            \
+       writel((val), regs + MVS_##reg);        \
+       readl(regs + MVS_##reg);                \
+       } while (0)
+
+/* driver compile-time configuration */
+enum driver_configuration {
+       MVS_TX_RING_SZ          = 1024, /* TX ring size (12-bit) */
+       MVS_RX_RING_SZ          = 1024, /* RX ring size (12-bit) */
+                                       /* software requires power-of-2
+                                          ring size */
+
+       MVS_SLOTS               = 512,  /* command slots */
+       MVS_SLOT_BUF_SZ         = 8192, /* cmd tbl + IU + status + PRD */
+       MVS_SSP_CMD_SZ          = 64,   /* SSP command table buffer size */
+       MVS_ATA_CMD_SZ          = 128,  /* SATA command table buffer size */
+       MVS_OAF_SZ              = 64,   /* Open address frame buffer size */
+
+       MVS_RX_FIS_COUNT        = 17,   /* Optional rx'd FISs (max 17) */
+};
+
+/* unchangeable hardware details */
+enum hardware_details {
+       MVS_MAX_PHYS            = 8,    /* max. possible phys */
+       MVS_MAX_PORTS           = 8,    /* max. possible ports */
+       MVS_RX_FISL_SZ          = 0x400 + (MVS_RX_FIS_COUNT * 0x100),
+};
+
+/* peripheral registers (BAR2) */
+enum peripheral_registers {
+       SPI_CTL                 = 0x10, /* EEPROM control */
+       SPI_CMD                 = 0x14, /* EEPROM command */
+       SPI_DATA                = 0x18, /* EEPROM data */
+};
+
+enum peripheral_register_bits {
+       TWSI_RDY                = (1U << 7),    /* EEPROM interface ready */
+       TWSI_RD                 = (1U << 4),    /* EEPROM read access */
+
+       SPI_ADDR_MASK           = 0x3ffff,      /* bits 17:0 */
+};
+
+/* enhanced mode registers (BAR4) */
+enum hw_registers {
+       MVS_GBL_CTL             = 0x04,  /* global control */
+       MVS_GBL_INT_STAT        = 0x08,  /* global irq status */
+       MVS_GBL_PI              = 0x0C,  /* ports implemented bitmask */
+       MVS_GBL_PORT_TYPE       = 0x00,  /* port type */
+
+       MVS_CTL                 = 0x100, /* SAS/SATA port configuration */
+       MVS_PCS                 = 0x104, /* SAS/SATA port control/status */
+       MVS_CMD_LIST_LO         = 0x108, /* cmd list addr */
+       MVS_CMD_LIST_HI         = 0x10C,
+       MVS_RX_FIS_LO           = 0x110, /* RX FIS list addr */
+       MVS_RX_FIS_HI           = 0x114,
+
+       MVS_TX_CFG              = 0x120, /* TX configuration */
+       MVS_TX_LO               = 0x124, /* TX (delivery) ring addr */
+       MVS_TX_HI               = 0x128,
+
+       MVS_RX_PROD_IDX         = 0x12C, /* RX producer pointer */
+       MVS_RX_CONS_IDX         = 0x130, /* RX consumer pointer (RO) */
+       MVS_RX_CFG              = 0x134, /* RX configuration */
+       MVS_RX_LO               = 0x138, /* RX (completion) ring addr */
+       MVS_RX_HI               = 0x13C,
+
+       MVS_INT_COAL            = 0x148, /* Int coalescing config */
+       MVS_INT_COAL_TMOUT      = 0x14C, /* Int coalescing timeout */
+       MVS_INT_STAT            = 0x150, /* Central int status */
+       MVS_INT_MASK            = 0x154, /* Central int enable */
+       MVS_INT_STAT_SRS        = 0x158, /* SATA register set status */
+
+                                        /* ports 1-3 follow after this */
+       MVS_P0_INT_STAT         = 0x160, /* port0 interrupt status */
+       MVS_P0_INT_MASK         = 0x164, /* port0 interrupt mask */
+
+                                        /* ports 1-3 follow after this */
+       MVS_P0_SER_CTLSTAT      = 0x180, /* port0 serial control/status */
+
+       MVS_CMD_ADDR            = 0x1B8, /* Command register port (addr) */
+       MVS_CMD_DATA            = 0x1BC, /* Command register port (data) */
+
+                                        /* ports 1-3 follow after this */
+       MVS_P0_CFG_ADDR         = 0x1C0, /* port0 phy register address */
+       MVS_P0_CFG_DATA         = 0x1C4, /* port0 phy register data */
+};
+
+enum hw_register_bits {
+       /* MVS_GBL_CTL */
+       INT_EN                  = (1U << 1),    /* Global int enable */
+       HBA_RST                 = (1U << 0),    /* HBA reset */
+
+       /* MVS_GBL_INT_STAT */
+       INT_XOR                 = (1U << 4),    /* XOR engine event */
+       INT_SAS_SATA            = (1U << 0),    /* SAS/SATA event */
+
+       /* MVS_GBL_PORT_TYPE */                 /* shl for ports 1-3 */
+       SATA_TARGET             = (1U << 16),   /* port0 SATA target enable */
+       AUTO_DET                = (1U << 8),    /* port0 SAS/SATA autodetect */
+       SAS_MODE                = (1U << 0),    /* port0 SAS(1), SATA(0) mode */
+                                               /* SAS_MODE value may be
+                                                * dictated (in hw) by values
+                                                * of SATA_TARGET & AUTO_DET
+                                                */
+
+       /* MVS_TX_CFG */
+       TX_EN                   = (1U << 16),   /* Enable TX */
+       TX_RING_SZ_MASK         = 0xfff,        /* TX ring size, bits 11:0 */
+
+       /* MVS_RX_CFG */
+       RX_EN                   = (1U << 16),   /* Enable RX */
+       RX_RING_SZ_MASK         = 0xfff,        /* RX ring size, bits 11:0 */
+
+       /* MVS_INT_COAL */
+       COAL_EN                 = (1U << 16),   /* Enable int coalescing */
+
+       /* MVS_INT_STAT, MVS_INT_MASK */
+       CINT_I2C                = (1U << 31),   /* I2C event */
+       CINT_SW0                = (1U << 30),   /* software event 0 */
+       CINT_SW1                = (1U << 29),   /* software event 1 */
+       CINT_PRD_BC             = (1U << 28),   /* PRD BC err for read cmd */
+       CINT_DMA_PCIE           = (1U << 27),   /* DMA to PCIE timeout */
+       CINT_MEM                = (1U << 26),   /* int mem parity err */
+       CINT_I2C_SLAVE          = (1U << 25),   /* slave I2C event */
+       CINT_SRS                = (1U << 3),    /* SRS event */
+       CINT_CI_STOP            = (1U << 10),   /* cmd issue stopped */
+       CINT_DONE               = (1U << 0),    /* cmd completion */
+
+                                               /* shl for ports 1-3 */
+       CINT_PORT_STOPPED       = (1U << 16),   /* port0 stopped */
+       CINT_PORT               = (1U << 8),    /* port0 event */
+
+       /* TX (delivery) ring bits */
+       TXQ_CMD_SHIFT           = 29,
+       TXQ_CMD_SSP             = 1,            /* SSP protocol */
+       TXQ_CMD_SMP             = 2,            /* SMP protocol */
+       TXQ_CMD_STP             = 3,            /* STP/SATA protocol */
+       TXQ_CMD_SSP_FREE_LIST   = 4,            /* add to SSP targ free list */
+       TXQ_CMD_SLOT_RESET      = 7,            /* reset command slot */
+       TXQ_MODE_I              = (1U << 28),   /* mode: 0=target,1=initiator */
+       TXQ_PRIO_HI             = (1U << 27),   /* priority: 0=normal, 1=high */
+       TXQ_SRS_SHIFT           = 20,           /* SATA register set */
+       TXQ_SRS_MASK            = 0x7f,
+       TXQ_PHY_SHIFT           = 12,           /* PHY bitmap */
+       TXQ_PHY_MASK            = 0xff,
+       TXQ_SLOT_MASK           = 0xfff,        /* slot number */
+
+       /* RX (completion) ring bits */
+       RXQ_GOOD                = (1U << 23),   /* Response good */
+       RXQ_SLOT_RESET          = (1U << 21),   /* Slot reset complete */
+       RXQ_CMD_RX              = (1U << 20),   /* target cmd received */
+       RXQ_ATTN                = (1U << 19),   /* attention */
+       RXQ_RSP                 = (1U << 18),   /* response frame xfer'd */
+       RXQ_ERR                 = (1U << 17),   /* err info rec xfer'd */
+       RXQ_DONE                = (1U << 16),   /* cmd complete */
+       RXQ_SLOT_MASK           = 0xfff,        /* slot number */
+
+       /* mvs_cmd_hdr bits */
+       MCH_PRD_LEN_SHIFT       = 16,           /* 16-bit PRD table len */
+       MCH_SSP_FR_TYPE_SHIFT   = 13,           /* SSP frame type */
+
+                                               /* SSP initiator only */
+       MCH_SSP_FR_CMD          = 0x0,          /* COMMAND frame */
+
+                                               /* SSP initiator or target */
+       MCH_SSP_FR_TASK         = 0x1,          /* TASK frame */
+
+                                               /* SSP target only */
+       MCH_SSP_FR_XFER_RDY     = 0x4,          /* XFER_RDY frame */
+       MCH_SSP_FR_RESP         = 0x5,          /* RESPONSE frame */
+       MCH_SSP_FR_READ         = 0x6,          /* Read DATA frame(s) */
+       MCH_SSP_FR_READ_RESP    = 0x7,          /* ditto, plus RESPONSE */
+
+       MCH_PASSTHRU            = (1U << 12),   /* pass-through (SSP) */
+       MCH_FBURST              = (1U << 11),   /* first burst (SSP) */
+       MCH_CHK_LEN             = (1U << 10),   /* chk xfer len (SSP) */
+       MCH_RETRY               = (1U << 9),    /* tport layer retry (SSP) */
+       MCH_PROTECTION          = (1U << 8),    /* protection info rec (SSP) */
+       MCH_RESET               = (1U << 7),    /* Reset (STP/SATA) */
+       MCH_FPDMA               = (1U << 6),    /* First party DMA (STP/SATA) */
+       MCH_ATAPI               = (1U << 5),    /* ATAPI (STP/SATA) */
+       MCH_BIST                = (1U << 4),    /* BIST activate (STP/SATA) */
+       MCH_PMP_MASK            = 0xf,          /* PMP from cmd FIS (STP/SATA)*/
+
+       CCTL_RST                = (1U << 5),    /* port logic reset */
+
+                                               /* 0(LSB first), 1(MSB first) */
+       CCTL_ENDIAN_DATA        = (1U << 3),    /* PRD data */
+       CCTL_ENDIAN_RSP         = (1U << 2),    /* response frame */
+       CCTL_ENDIAN_OPEN        = (1U << 1),    /* open address frame */
+       CCTL_ENDIAN_CMD         = (1U << 0),    /* command table */
+
+       /* MVS_Px_SER_CTLSTAT (per-phy control) */
+       PHY_SSP_RST             = (1U << 3),    /* reset SSP link layer */
+       PHY_BCAST_CHG           = (1U << 2),    /* broadcast(change) notif */
+       PHY_RST_HARD            = (1U << 1),    /* hard reset + phy reset */
+       PHY_RST                 = (1U << 0),    /* phy reset */
+
+       /* MVS_Px_INT_STAT, MVS_Px_INT_MASK (per-phy events) */
+       PHYEV_UNASSOC_FIS       = (1U << 19),   /* unassociated FIS rx'd */
+       PHYEV_AN                = (1U << 18),   /* SATA async notification */
+       PHYEV_BIST_ACT          = (1U << 17),   /* BIST activate FIS */
+       PHYEV_SIG_FIS           = (1U << 16),   /* signature FIS */
+       PHYEV_POOF              = (1U << 12),   /* phy ready from 1 -> 0 */
+       PHYEV_IU_BIG            = (1U << 11),   /* IU too long err */
+       PHYEV_IU_SMALL          = (1U << 10),   /* IU too short err */
+       PHYEV_UNK_TAG           = (1U << 9),    /* unknown tag */
+       PHYEV_BROAD_CH          = (1U << 8),    /* broadcast(CHANGE) */
+       PHYEV_COMWAKE           = (1U << 7),    /* COMWAKE rx'd */
+       PHYEV_PORT_SEL          = (1U << 6),    /* port selector present */
+       PHYEV_HARD_RST          = (1U << 5),    /* hard reset rx'd */
+       PHYEV_ID_TMOUT          = (1U << 4),    /* identify timeout */
+       PHYEV_ID_FAIL           = (1U << 3),    /* identify failed */
+       PHYEV_ID_DONE           = (1U << 2),    /* identify done */
+       PHYEV_HARD_RST_DONE     = (1U << 1),    /* hard reset done */
+       PHYEV_RDY_CH            = (1U << 0),    /* phy ready changed state */
+
+       /* MVS_PCS */
+       PCS_SATA_RETRY          = (1U << 8),    /* retry ctl FIS on R_ERR */
+       PCS_RSP_RX_EN           = (1U << 7),    /* raw response rx */
+       PCS_SELF_CLEAR          = (1U << 5),    /* self-clearing int mode */
+       PCS_FIS_RX_EN           = (1U << 4),    /* FIS rx enable */
+       PCS_CMD_STOP_ERR        = (1U << 3),    /* cmd stop-on-err enable */
+       PCS_CMD_RST             = (1U << 2),    /* reset cmd issue */
+       PCS_CMD_EN              = (1U << 0),    /* enable cmd issue */
+};
+
+enum mvs_info_flags {
+       MVF_MSI                 = (1U << 0),    /* MSI is enabled */
+       MVF_PHY_PWR_FIX         = (1U << 1),    /* bug workaround */
+};
+
+enum sas_cmd_port_registers {
+       CMD_CMRST_OOB_DET       = 0x100, /* COMRESET OOB detect register */
+       CMD_CMWK_OOB_DET        = 0x104, /* COMWAKE OOB detect register */
+       CMD_CMSAS_OOB_DET       = 0x108, /* COMSAS OOB detect register */
+       CMD_BRST_OOB_DET        = 0x10c, /* burst OOB detect register */
+       CMD_OOB_SPACE           = 0x110, /* OOB space control register */
+       CMD_OOB_BURST           = 0x114, /* OOB burst control register */
+       CMD_PHY_TIMER           = 0x118, /* PHY timer control register */
+       CMD_PHY_CONFIG0         = 0x11c, /* PHY config register 0 */
+       CMD_PHY_CONFIG1         = 0x120, /* PHY config register 1 */
+       CMD_SAS_CTL0            = 0x124, /* SAS control register 0 */
+       CMD_SAS_CTL1            = 0x128, /* SAS control register 1 */
+       CMD_SAS_CTL2            = 0x12c, /* SAS control register 2 */
+       CMD_SAS_CTL3            = 0x130, /* SAS control register 3 */
+       CMD_ID_TEST             = 0x134, /* ID test register */
+       CMD_PL_TIMER            = 0x138, /* PL timer register */
+       CMD_WD_TIMER            = 0x13c, /* WD timer register */
+       CMD_PORT_SEL_COUNT      = 0x140, /* port selector count register */
+       CMD_APP_MEM_CTL         = 0x144, /* Application Memory Control */
+       CMD_XOR_MEM_CTL         = 0x148, /* XOR Block Memory Control */
+       CMD_DMA_MEM_CTL         = 0x14c, /* DMA Block Memory Control */
+       CMD_PORT_MEM_CTL0       = 0x150, /* Port Memory Control 0 */
+       CMD_PORT_MEM_CTL1       = 0x154, /* Port Memory Control 1 */
+       CMD_SATA_PORT_MEM_CTL0  = 0x158, /* SATA Port Memory Control 0 */
+       CMD_SATA_PORT_MEM_CTL1  = 0x15c, /* SATA Port Memory Control 1 */
+       CMD_XOR_MEM_BIST_CTL    = 0x160, /* XOR Memory BIST Control */
+       CMD_XOR_MEM_BIST_STAT   = 0x164, /* XOR Memroy BIST Status */
+       CMD_DMA_MEM_BIST_CTL    = 0x168, /* DMA Memory BIST Control */
+       CMD_DMA_MEM_BIST_STAT   = 0x16c, /* DMA Memory BIST Status */
+       CMD_PORT_MEM_BIST_CTL   = 0x170, /* Port Memory BIST Control */
+       CMD_PORT_MEM_BIST_STAT0 = 0x174, /* Port Memory BIST Status 0 */
+       CMD_PORT_MEM_BIST_STAT1 = 0x178, /* Port Memory BIST Status 1 */
+       CMD_STP_MEM_BIST_CTL    = 0x17c, /* STP Memory BIST Control */
+       CMD_STP_MEM_BIST_STAT0  = 0x180, /* STP Memory BIST Status 0 */
+       CMD_STP_MEM_BIST_STAT1  = 0x184, /* STP Memory BIST Status 1 */
+       CMD_RESET_COUNT         = 0x188, /* Reset Count */
+       CMD_MONTR_DATA_SEL      = 0x18C, /* Monitor Data/Select */
+       CMD_PLL_PHY_CONFIG      = 0x190, /* PLL/PHY Configuration */
+       CMD_PHY_CTL             = 0x194, /* PHY Control and Status */
+       CMD_PHY_TEST_COUNT0     = 0x198, /* Phy Test Count 0 */
+       CMD_PHY_TEST_COUNT1     = 0x19C, /* Phy Test Count 1 */
+       CMD_PHY_TEST_COUNT2     = 0x1A0, /* Phy Test Count 2 */
+       CMD_APP_ERR_CONFIG      = 0x1A4, /* Application Error Configuration */
+       CMD_PND_FIFO_CTL0       = 0x1A8, /* Pending FIFO Control 0 */
+       CMD_HOST_CTL            = 0x1AC, /* Host Control Status */
+       CMD_HOST_WR_DATA        = 0x1B0, /* Host Write Data */
+       CMD_HOST_RD_DATA        = 0x1B4, /* Host Read Data */
+       CMD_PHY_MODE_21         = 0x1B8, /* Phy Mode 21 */
+       CMD_SL_MODE0            = 0x1BC, /* SL Mode 0 */
+       CMD_SL_MODE1            = 0x1C0, /* SL Mode 1 */
+       CMD_PND_FIFO_CTL1       = 0x1C4, /* Pending FIFO Control 1 */
+};
+
+/* SAS/SATA configuration port registers, aka phy registers */
+enum sas_sata_config_port_regs {
+       PHYR_IDENTIFY           = 0x0,  /* info for IDENTIFY frame */
+       PHYR_ADDR_LO            = 0x4,  /* my SAS address (low) */
+       PHYR_ADDR_HI            = 0x8,  /* my SAS address (high) */
+       PHYR_ATT_DEV_INFO       = 0xC,  /* attached device info */
+       PHYR_ATT_ADDR_LO        = 0x10, /* attached dev SAS addr (low) */
+       PHYR_ATT_ADDR_HI        = 0x14, /* attached dev SAS addr (high) */
+       PHYR_SATA_CTL           = 0x18, /* SATA control */
+       PHYR_PHY_STAT           = 0x1C, /* PHY status */
+       PHYR_WIDE_PORT          = 0x38, /* wide port participating */
+       PHYR_CURRENT0           = 0x80, /* current connection info 0 */
+       PHYR_CURRENT1           = 0x84, /* current connection info 1 */
+       PHYR_CURRENT2           = 0x88, /* current connection info 2 */
+};
+
+enum pci_cfg_registers {
+       PCR_PHY_CTL             = 0x40,
+       PCR_PHY_CTL2            = 0x90,
+};
+
+enum pci_cfg_register_bits {
+       PCTL_PWR_ON             = (0xFU << 24),
+       PCTL_OFF                = (0xFU << 12),
+};
+
+enum nvram_layout_offsets {
+       NVR_SIG                 = 0x00,         /* 0xAA, 0x55 */
+       NVR_SAS_ADDR            = 0x02,         /* 8-byte SAS address */
+};
+
+enum chip_flavors {
+       chip_6320,
+       chip_6440,
+       chip_6480,
+};
+
+struct mvs_chip_info {
+       unsigned int            n_phy;
+       unsigned int            srs_sz;
+       unsigned int            slot_width;
+};
+
+struct mvs_err_info {
+       __le32                  flags;
+       __le32                  flags2;
+};
+
+struct mvs_prd {
+       __le64                  addr;           /* 64-bit buffer address */
+       __le32                  reserved;
+       __le32                  len;            /* 16-bit length */
+};
+
+struct mvs_cmd_hdr {
+       __le32                  flags;          /* PRD tbl len; SAS, SATA ctl */
+       __le32                  lens;           /* cmd, max resp frame len */
+       __le32                  tags;           /* targ port xfer tag; tag */
+       __le32                  data_len;       /* data xfer len */
+       __le64                  cmd_tbl;        /* command table address */
+       __le64                  open_frame;     /* open addr frame address */
+       __le64                  status_buf;     /* status buffer address */
+       __le64                  prd_tbl;        /* PRD tbl address */
+       __le32                  reserved[4];
+};
+
+struct mvs_slot_info {
+       struct sas_task         *task;
+       unsigned int            n_elem;
+
+       /* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+        * and PRD table
+        */
+       void                    *buf;
+       dma_addr_t              buf_dma;
+
+       void                    *response;
+};
+
+struct mvs_port {
+       struct asd_sas_port     sas_port;
+};
+
+struct mvs_phy {
+       struct mvs_port         *port;
+       struct asd_sas_phy      sas_phy;
+
+       u8                      frame_rcvd[24 + 1024];
+};
+
+struct mvs_info {
+       unsigned long           flags;
+
+       spinlock_t              lock;           /* host-wide lock */
+       struct pci_dev          *pdev;          /* our device */
+       void __iomem            *regs;          /* enhanced mode registers */
+       void __iomem            *peri_regs;     /* peripheral registers */
+
+       u8                      sas_addr[SAS_ADDR_SIZE];
+       struct sas_ha_struct    sas;            /* SCSI/SAS glue */
+       struct Scsi_Host        *shost;
+
+       __le32                  *tx;            /* TX (delivery) DMA ring */
+       dma_addr_t              tx_dma;
+       u32                     tx_prod;        /* cached next-producer idx */
+
+       __le32                  *rx;            /* RX (completion) DMA ring */
+       dma_addr_t              rx_dma;
+       u32                     rx_cons;        /* RX consumer idx */
+
+       __le32                  *rx_fis;        /* RX'd FIS area */
+       dma_addr_t              rx_fis_dma;
+
+       struct mvs_cmd_hdr      *slot;          /* DMA command header slots */
+       dma_addr_t              slot_dma;
+
+       const struct mvs_chip_info *chip;
+
+                                       /* further per-slot information */
+       struct mvs_slot_info    slot_info[MVS_SLOTS];
+       unsigned long           tags[(MVS_SLOTS / sizeof(unsigned long)) + 1];
+
+       struct mvs_phy          phy[MVS_MAX_PHYS];
+       struct mvs_port         port[MVS_MAX_PHYS];
+};
+
+static struct scsi_transport_template *mvs_stt;
+
+static const struct mvs_chip_info mvs_chips[] = {
+       [chip_6320] =           { 2, 16, 9 },
+       [chip_6440] =           { 4, 16, 9 },
+       [chip_6480] =           { 8, 32, 10 },
+};
+
+static struct scsi_host_template mvs_sht = {
+       .module                 = THIS_MODULE,
+       .name                   = DRV_NAME,
+       .queuecommand           = sas_queuecommand,
+       .target_alloc           = sas_target_alloc,
+       .slave_configure        = sas_slave_configure,
+       .slave_destroy          = sas_slave_destroy,
+       .change_queue_depth     = sas_change_queue_depth,
+       .change_queue_type      = sas_change_queue_type,
+       .bios_param             = sas_bios_param,
+       .can_queue              = 1,
+       .cmd_per_lun            = 1,
+       .this_id                = -1,
+       .sg_tablesize           = SG_ALL,
+       .max_sectors            = SCSI_DEFAULT_MAX_SECTORS,
+       .use_clustering         = ENABLE_CLUSTERING,
+       .eh_device_reset_handler= sas_eh_device_reset_handler,
+       .eh_bus_reset_handler   = sas_eh_bus_reset_handler,
+       .slave_alloc            = sas_slave_alloc,
+       .target_destroy         = sas_target_destroy,
+       .ioctl                  = sas_ioctl,
+};
+
+static void mvs_int_rx(struct mvs_info *mvi, bool self_clear);
+
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+       int rc;
+
+       if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+               rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+               if (rc) {
+                       rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+                       if (rc) {
+                               dev_printk(KERN_ERR, &pdev->dev,
+                                          "64-bit DMA enable failed\n");
+                               return rc;
+                       }
+               }
+       } else {
+               rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+               if (rc) {
+                       dev_printk(KERN_ERR, &pdev->dev,
+                                  "32-bit DMA enable failed\n");
+                       return rc;
+               }
+               rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+               if (rc) {
+                       dev_printk(KERN_ERR, &pdev->dev,
+                                  "32-bit consistent DMA enable failed\n");
+                       return rc;
+               }
+       }
+
+       return rc;
+}
+
+static void mvs_tag_clear(struct mvs_info *mvi, unsigned int tag)
+{
+       mvi->tags[tag / sizeof(unsigned long)] &=
+               ~(1UL << (tag % sizeof(unsigned long)));
+}
+
+static void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
+{
+       mvi->tags[tag / sizeof(unsigned long)] |=
+               (1UL << (tag % sizeof(unsigned long)));
+}
+
+static bool mvs_tag_test(struct mvs_info *mvi, unsigned int tag)
+{
+       return mvi->tags[tag / sizeof(unsigned long)] &
+               (1UL << (tag % sizeof(unsigned long)));
+}
+
+static int mvs_tag_alloc(struct mvs_info *mvi, unsigned int *tag_out)
+{
+       unsigned int i;
+
+       for (i = 0; i < MVS_SLOTS; i++)
+               if (!mvs_tag_test(mvi, i)) {
+                       mvs_tag_set(mvi, i);
+                       *tag_out = i;
+                       return 0;
+               }
+
+       return -EBUSY;
+}
+
+static int mvs_eep_read(void __iomem *regs, unsigned int addr, u32 *data)
+{
+       int timeout = 1000;
+
+       if (addr & ~SPI_ADDR_MASK)
+               return -EINVAL;
+
+       writel(addr, regs + SPI_CMD);
+       writel(TWSI_RD, regs + SPI_CTL);
+
+       while (timeout-- > 0) {
+               if (readl(regs + SPI_CTL) & TWSI_RDY) {
+                       *data = readl(regs + SPI_DATA);
+                       return 0;
+               }
+
+               udelay(10);
+       }
+
+       return -EBUSY;
+}
+
+static int mvs_eep_read_buf(void __iomem *regs, unsigned int addr,
+                           void *buf, unsigned int buflen)
+{
+       unsigned int addr_end, tmp_addr, i, j;
+       u32 tmp = 0;
+       int rc;
+       u8 *tmp8, *buf8 = buf;
+
+       addr_end = addr + buflen;
+       tmp_addr = ALIGN(addr, 4);
+       if (addr > 0xff)
+               return -EINVAL;
+
+       j = addr & 0x3;
+       if (j) {
+               rc = mvs_eep_read(regs, tmp_addr, &tmp);
+               if (rc)
+                       return rc;
+
+               tmp8 = (u8 *) &tmp;
+               for (i = j; i < 4; i++)
+                       *buf8++ = tmp8[i];
+
+               tmp_addr += 4;
+       }
+
+       for (j = ALIGN(addr_end, 4); tmp_addr < j; tmp_addr += 4) {
+               rc = mvs_eep_read(regs, tmp_addr, &tmp);
+               if (rc)
+                       return rc;
+
+               memcpy(buf8, &tmp, 4);
+               buf8 += 4;
+       }
+
+       if (tmp_addr < addr_end) {
+               rc = mvs_eep_read(regs, tmp_addr, &tmp);
+               if (rc)
+                       return rc;
+
+               tmp8 = (u8 *) &tmp;
+               j = addr_end - tmp_addr;
+               for (i = 0; i < j; i++)
+                       *buf8++ = tmp8[i];
+
+               tmp_addr += 4;
+       }
+
+       return 0;
+}
+
+static int mvs_nvram_read(struct mvs_info *mvi, unsigned int addr,
+                         void *buf, unsigned int buflen)
+{
+       void __iomem *regs = mvi->regs;
+       int rc, i;
+       unsigned int sum;
+       u8 hdr[2], *tmp;
+       const char *msg;
+
+       rc = mvs_eep_read_buf(regs, addr, &hdr, 2);
+       if (rc) {
+               msg = "nvram hdr read failed";
+               goto err_out;
+       }
+       rc = mvs_eep_read_buf(regs, addr + 2, buf, buflen);
+       if (rc) {
+               msg = "nvram read failed";
+               goto err_out;
+       }
+
+       if (hdr[0] != 0x5A) {           /* entry id */
+               msg = "invalid nvram entry id";
+               rc = -ENOENT;
+               goto err_out;
+       }
+
+       tmp = buf;
+       sum = ((unsigned int)hdr[0]) + ((unsigned int)hdr[1]);
+       for (i = 0; i < buflen; i++)
+               sum += ((unsigned int)tmp[i]);
+
+       if (sum) {
+               msg = "nvram checksum failure";
+               rc = -EILSEQ;
+               goto err_out;
+       }
+
+       return 0;
+
+err_out:
+       dev_printk(KERN_ERR, &mvi->pdev->dev, "%s", msg);
+       return rc;
+}
+
+static void mvs_int_port(struct mvs_info *mvi, int port_no, u32 events)
+{
+       /* FIXME */
+}
+
+static void mvs_int_sata(struct mvs_info *mvi)
+{
+       /* FIXME */
+}
+
+static void mvs_slot_free(struct mvs_info *mvi, struct sas_task *task,
+                         struct mvs_slot_info *slot, unsigned int slot_idx)
+{
+       if (slot->n_elem)
+               pci_unmap_sg(mvi->pdev, task->scatter,
+                            slot->n_elem, task->data_dir);
+
+       switch (task->task_proto) {
+       case SAS_PROTOCOL_SMP:
+               pci_unmap_sg(mvi->pdev, &task->smp_task.smp_resp, 1,
+                            PCI_DMA_FROMDEVICE);
+               pci_unmap_sg(mvi->pdev, &task->smp_task.smp_req, 1,
+                            PCI_DMA_TODEVICE);
+               break;
+
+       case SAS_PROTOCOL_SATA:
+       case SAS_PROTOCOL_STP:
+       case SAS_PROTOCOL_SSP:
+       default:
+               /* do nothing */
+               break;
+       }
+
+       mvs_tag_clear(mvi, slot_idx);
+}
+
+static void mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
+                        unsigned int slot_idx)
+{
+       /* FIXME */
+}
+
+static void mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc)
+{
+       unsigned int slot_idx = rx_desc & RXQ_SLOT_MASK;
+       struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
+       struct sas_task *task = slot->task;
+       struct task_status_struct *tstat = &task->task_status;
+       bool aborted;
+
+       spin_lock(&task->task_state_lock);
+       aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
+       if (!aborted) {
+               task->task_state_flags &=
+                       ~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
+               task->task_state_flags |= SAS_TASK_STATE_DONE;
+       }
+       spin_unlock(&task->task_state_lock);
+
+       if (aborted)
+               return;
+
+       memset(tstat, 0, sizeof(*tstat));
+       tstat->resp = SAS_TASK_COMPLETE;
+
+       /* error info record present */
+       if (rx_desc & RXQ_ERR) {
+               tstat->stat = SAM_CHECK_COND;
+               mvs_slot_err(mvi, task, slot_idx);
+               goto out;
+       }
+
+       switch (task->task_proto) {
+       case SAS_PROTOCOL_SSP:
+               /* hw says status == 0, datapres == 0 */
+               if (rx_desc & RXQ_GOOD)
+                       tstat->stat = SAM_GOOD;
+
+               /* response frame present */
+               else if (rx_desc & RXQ_RSP) {
+                       struct ssp_response_iu *iu =
+                               slot->response + sizeof(struct mvs_err_info);
+                       sas_ssp_task_response(&mvi->pdev->dev, task, iu);
+               }
+
+               /* should never happen? */
+               else
+                       tstat->stat = SAM_CHECK_COND;
+               break;
+
+       case SAS_PROTOCOL_SMP:
+               tstat->stat = SAM_GOOD;
+               break;
+
+       case SAS_PROTOCOL_SATA:
+       case SAS_PROTOCOL_STP:
+               if ((rx_desc & (RXQ_DONE | RXQ_ERR | RXQ_ATTN)) == RXQ_DONE)
+                       tstat->stat = SAM_GOOD;
+               else
+                       tstat->stat = SAM_CHECK_COND;
+               /* FIXME: read taskfile data from SATA register set
+                * associated with SATA target
+                */
+               break;
+
+       default:
+               tstat->stat = SAM_CHECK_COND;
+               break;
+       }
+
+out:
+       mvs_slot_free(mvi, task, slot, slot_idx);
+       task->task_done(task);
+}
+
+static void mvs_int_full(struct mvs_info *mvi)
+{
+       void __iomem *regs = mvi->regs;
+       u32 tmp, stat;
+       int i;
+
+       stat = mr32(INT_STAT);
+
+       for (i = 0; i < MVS_MAX_PORTS; i++) {
+               tmp = (stat >> i) & (CINT_PORT | CINT_PORT_STOPPED);
+               if (tmp)
+                       mvs_int_port(mvi, i, tmp);
+       }
+
+       if (stat & CINT_SRS)
+               mvs_int_sata(mvi);
+
+       if (stat & (CINT_CI_STOP | CINT_DONE))
+               mvs_int_rx(mvi, false);
+
+       mw32(INT_STAT, stat);
+}
+
+static void mvs_int_rx(struct mvs_info *mvi, bool self_clear)
+{
+       u32 rx_prod_idx, rx_desc;
+       bool attn = false;
+
+       /* the first dword in the RX ring is special: it contains
+        * a mirror of the hardware's RX producer index, so that
+        * we don't have to stall the CPU reading that register.
+        * The actual RX ring is offset by one dword, due to this.
+        */
+       rx_prod_idx = le32_to_cpu(mvi->rx[0]) & 0xfff;
+       if (rx_prod_idx == 0xfff) {     /* h/w hasn't touched RX ring yet */
+               mvi->rx_cons = 0xfff;
+               return;
+       }
+       if (mvi->rx_cons == 0xfff)
+               mvi->rx_cons = MVS_RX_RING_SZ - 1;
+
+       while (mvi->rx_cons != rx_prod_idx) {
+               /* increment our internal RX consumer pointer */
+               mvi->rx_cons = (mvi->rx_cons + 1) & (MVS_RX_RING_SZ - 1);
+
+               /* Read RX descriptor at offset+1, due to above */
+               rx_desc = le32_to_cpu(mvi->rx[mvi->rx_cons + 1]);
+
+               if (rx_desc & RXQ_DONE)
+                       /* we had a completion, error or no */
+                       mvs_slot_complete(mvi, rx_desc);
+
+               if (rx_desc & RXQ_ATTN)
+                       attn = true;
+       }
+
+       if (attn && self_clear)
+               mvs_int_full(mvi);
+
+}
+
+static irqreturn_t mvs_interrupt(int irq, void *opaque)
+{
+       struct mvs_info *mvi = opaque;
+       void __iomem *regs = mvi->regs;
+       u32 stat;
+
+       stat = mr32(GBL_INT_STAT);
+       if (stat == 0 || stat == 0xffffffff)
+               return IRQ_NONE;
+
+       spin_lock(&mvi->lock);
+
+       mvs_int_full(mvi);
+
+       spin_unlock(&mvi->lock);
+
+       return IRQ_HANDLED;
+}
+
+static irqreturn_t mvs_msi_interrupt(int irq, void *opaque)
+{
+       struct mvs_info *mvi = opaque;
+
+       spin_lock(&mvi->lock);
+
+       mvs_int_rx(mvi, true);
+
+       spin_unlock(&mvi->lock);
+
+       return IRQ_HANDLED;
+}
+
+struct mvs_task_exec_info {
+       struct sas_task         *task;
+       struct mvs_cmd_hdr      *hdr;
+       unsigned int            tag;
+       int                     n_elem;
+};
+
+static int mvs_task_prep_smp(struct mvs_info *mvi, struct mvs_task_exec_info *tei)
+{
+       int elem, rc;
+       struct mvs_cmd_hdr *hdr = tei->hdr;
+       struct scatterlist *sg_req, *sg_resp;
+       unsigned int req_len, resp_len, tag = tei->tag;
+
+       /*
+        * DMA-map SMP request, response buffers
+        */
+
+       sg_req = &tei->task->smp_task.smp_req;
+       elem = pci_map_sg(mvi->pdev, sg_req, 1, PCI_DMA_TODEVICE);
+       if (!elem)
+               return -ENOMEM;
+       req_len = sg_dma_len(sg_req);
+
+       sg_resp = &tei->task->smp_task.smp_resp;
+       elem = pci_map_sg(mvi->pdev, sg_resp, 1, PCI_DMA_FROMDEVICE);
+       if (!elem) {
+               rc = -ENOMEM;
+               goto err_out;
+       }
+       resp_len = sg_dma_len(sg_resp);
+
+       /* must be in dwords */
+       if ((req_len & 0x3) || (resp_len & 0x3)) {
+               rc = -EINVAL;
+               goto err_out_2;
+       }
+
+       /*
+        * Fill in TX ring and command slot header
+        */
+
+       mvi->tx[tag] = cpu_to_le32(
+               (TXQ_CMD_SMP << TXQ_CMD_SHIFT) | TXQ_MODE_I | tag);
+
+       hdr->flags = 0;
+       hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+       hdr->tags = cpu_to_le32(tag);
+       hdr->data_len = 0;
+       hdr->cmd_tbl = cpu_to_le64(sg_dma_address(sg_req));
+       hdr->open_frame = 0;
+       hdr->status_buf = cpu_to_le64(sg_dma_address(sg_resp));
+       hdr->prd_tbl = 0;
+
+       return 0;
+
+err_out_2:
+       pci_unmap_sg(mvi->pdev, &tei->task->smp_task.smp_resp, 1,
+                    PCI_DMA_FROMDEVICE);
+err_out:
+       pci_unmap_sg(mvi->pdev, &tei->task->smp_task.smp_req, 1,
+                    PCI_DMA_TODEVICE);
+       return rc;
+}
+
+static int mvs_task_prep_ata(struct mvs_info *mvi,
+                            struct mvs_task_exec_info *tei)
+{
+       struct sas_task *task = tei->task;
+       struct domain_device *dev = task->dev;
+       struct mvs_cmd_hdr *hdr = tei->hdr;
+       struct asd_sas_port *sas_port = dev->port;
+       unsigned int tag = tei->tag;
+       struct mvs_slot_info *slot = &mvi->slot_info[tag];
+       u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+       struct scatterlist *sg;
+       struct mvs_prd *buf_prd;
+       void *buf_tmp;
+       u8 *buf_cmd, *buf_oaf;
+       dma_addr_t buf_tmp_dma;
+       unsigned int i, req_len, resp_len;
+
+       /* FIXME: fill in SATA register set */
+       mvi->tx[tag] = cpu_to_le32(TXQ_MODE_I | tag |
+               (TXQ_CMD_STP << TXQ_CMD_SHIFT) |
+               (sas_port->phy_mask << TXQ_PHY_SHIFT));
+
+       if (task->ata_task.use_ncq)
+               flags |= MCH_FPDMA;
+       if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
+               flags |= MCH_ATAPI;
+       /* FIXME: fill in port multiplier number */
+
+       hdr->flags = cpu_to_le32(flags);
+       hdr->tags = cpu_to_le32(tag);
+       hdr->data_len = cpu_to_le32(task->total_xfer_len);
+
+       /*
+        * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+        */
+       memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+
+       /* region 1: command table area (MVS_ATA_CMD_SZ bytes) ***************/
+       buf_cmd =
+       buf_tmp = slot->buf;
+       buf_tmp_dma = slot->buf_dma;
+
+       hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+
+       buf_tmp += MVS_ATA_CMD_SZ;
+       buf_tmp_dma += MVS_ATA_CMD_SZ;
+
+       /* region 2: open address frame area (MVS_OAF_SZ bytes) **********/
+       /* used for STP.  unused for SATA? */
+       buf_oaf = buf_tmp;
+       hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+       buf_tmp += MVS_OAF_SZ;
+       buf_tmp_dma += MVS_OAF_SZ;
+
+       /* region 3: PRD table ***********************************************/
+       buf_prd = buf_tmp;
+       hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+
+       i = sizeof(struct mvs_prd) * tei->n_elem;
+       buf_tmp += i;
+       buf_tmp_dma += i;
+
+       /* region 4: status buffer (larger the PRD, smaller this buf) ********/
+       /* FIXME: probably unused, for SATA.  kept here just in case
+        * we get a STP/SATA error information record
+        */
+       slot->response = buf_tmp;
+       hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+
+       req_len = sizeof(struct ssp_frame_hdr) + 28;
+       resp_len = MVS_SLOT_BUF_SZ - MVS_ATA_CMD_SZ -
+                  sizeof(struct mvs_err_info) - i;
+
+       /* request, response lengths */
+       hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+
+       /* fill in command FIS and ATAPI CDB */
+       memcpy(buf_cmd, &task->ata_task.fis,
+              sizeof(struct host_to_dev_fis));
+       memcpy(buf_cmd + 0x40, task->ata_task.atapi_packet, 16);
+
+       /* fill in PRD (scatter/gather) table, if any */
+       sg = task->scatter;
+       for (i = 0; i < tei->n_elem; i++) {
+               buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+               buf_prd->len = cpu_to_le32(sg_dma_len(sg));
+
+               sg++;
+               buf_prd++;
+       }
+
+       return 0;
+}
+
+static int mvs_task_prep_ssp(struct mvs_info *mvi,
+                            struct mvs_task_exec_info *tei)
+{
+       struct sas_task *task = tei->task;
+       struct asd_sas_port *sas_port = task->dev->port;
+       struct mvs_cmd_hdr *hdr = tei->hdr;
+       struct mvs_slot_info *slot;
+       struct scatterlist *sg;
+       unsigned int resp_len, req_len, i, tag = tei->tag;
+       struct mvs_prd *buf_prd;
+       struct ssp_frame_hdr *ssp_hdr;
+       void *buf_tmp;
+       u8 *buf_cmd, *buf_oaf, fburst = 0;
+       dma_addr_t buf_tmp_dma;
+       u32 flags;
+
+       slot = &mvi->slot_info[tag];
+
+       mvi->tx[tag] = cpu_to_le32(TXQ_MODE_I | tag |
+               (TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
+               (sas_port->phy_mask << TXQ_PHY_SHIFT));
+
+       flags = MCH_RETRY;
+       if (task->ssp_task.enable_first_burst) {
+               flags |= MCH_FBURST;
+               fburst = (1 << 7);
+       }
+       hdr->flags = cpu_to_le32(flags |
+               (tei->n_elem << MCH_PRD_LEN_SHIFT) |
+               (MCH_SSP_FR_CMD << MCH_SSP_FR_TYPE_SHIFT));
+
+       hdr->tags = cpu_to_le32(tag);
+       hdr->data_len = cpu_to_le32(task->total_xfer_len);
+
+       /*
+        * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+        */
+       memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+
+       /* region 1: command table area (MVS_SSP_CMD_SZ bytes) ***************/
+       buf_cmd =
+       buf_tmp = slot->buf;
+       buf_tmp_dma = slot->buf_dma;
+
+       hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+
+       buf_tmp += MVS_SSP_CMD_SZ;
+       buf_tmp_dma += MVS_SSP_CMD_SZ;
+
+       /* region 2: open address frame area (MVS_OAF_SZ bytes) **********/
+       buf_oaf = buf_tmp;
+       hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+       buf_tmp += MVS_OAF_SZ;
+       buf_tmp_dma += MVS_OAF_SZ;
+
+       /* region 3: PRD table ***********************************************/
+       buf_prd = buf_tmp;
+       hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+
+       i = sizeof(struct mvs_prd) * tei->n_elem;
+       buf_tmp += i;
+       buf_tmp_dma += i;
+
+       /* region 4: status buffer (larger the PRD, smaller this buf) ********/
+       slot->response = buf_tmp;
+       hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+
+       req_len = sizeof(struct ssp_frame_hdr) + 28;
+       resp_len = MVS_SLOT_BUF_SZ - MVS_SSP_CMD_SZ - MVS_OAF_SZ -
+                  sizeof(struct mvs_err_info) - i;
+
+       /* request, response lengths */
+       hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+
+       /* generate open address frame hdr (first 12 bytes) */
+       buf_oaf[0] = (1 << 7) | (1 << 4) | 0x1; /* initiator, SSP, ftype 1h */
+       buf_oaf[1] = task->dev->linkrate & 0xf;
+       buf_oaf[2] = tag >> 8;
+       buf_oaf[3] = tag;
+       memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
+
+       /* fill in SSP frame header */
+       ssp_hdr = (struct ssp_frame_hdr *) buf_cmd;
+       ssp_hdr->frame_type = SSP_COMMAND;
+       memcpy(ssp_hdr->hashed_dest_addr, task->dev->hashed_sas_addr,
+              HASHED_SAS_ADDR_SIZE);
+       memcpy(ssp_hdr->hashed_src_addr,
+              task->dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+       ssp_hdr->tag = cpu_to_be16(tag);
+
+       /* fill in command frame IU */
+       buf_cmd += sizeof(*ssp_hdr);
+       memcpy(buf_cmd, &task->ssp_task.LUN, 8);
+       buf_cmd[9] = fburst |
+               task->ssp_task.task_attr |
+               (task->ssp_task.task_prio << 3);
+       memcpy(buf_cmd + 12, &task->ssp_task.cdb, 16);
+
+       /* fill in PRD (scatter/gather) table, if any */
+       sg = task->scatter;
+       for (i = 0; i < tei->n_elem; i++) {
+               buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+               buf_prd->len = cpu_to_le32(sg_dma_len(sg));
+
+               sg++;
+               buf_prd++;
+       }
+
+       return 0;
+}
+
+static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags)
+{
+       struct mvs_info *mvi = task->dev->port->ha->lldd_ha;
+       unsigned int tag = 0xdeadbeef, rc, n_elem = 0;
+       void __iomem *regs = mvi->regs;
+       unsigned long flags;
+       struct mvs_task_exec_info tei;
+
+       /* FIXME: STP/SATA support not complete yet */
+       if (task->task_proto == SAS_PROTOCOL_SATA || task->task_proto == SAS_PROTOCOL_STP)
+               return -SAS_DEV_NO_RESPONSE;
+
+       if (task->num_scatter) {
+               n_elem = pci_map_sg(mvi->pdev, task->scatter,
+                                   task->num_scatter, task->data_dir);
+               if (!n_elem)
+                       return -ENOMEM;
+       }
+
+       spin_lock_irqsave(&mvi->lock, flags);
+
+       rc = mvs_tag_alloc(mvi, &tag);
+       if (rc)
+               goto err_out;
+
+       mvi->slot_info[tag].task = task;
+       mvi->slot_info[tag].n_elem = n_elem;
+       tei.task = task;
+       tei.hdr = &mvi->slot[tag];
+       tei.tag = tag;
+       tei.n_elem = n_elem;
+
+       switch (task->task_proto) {
+       case SAS_PROTOCOL_SMP:
+               rc = mvs_task_prep_smp(mvi, &tei);
+               break;
+       case SAS_PROTOCOL_SSP:
+               rc = mvs_task_prep_ssp(mvi, &tei);
+               break;
+       case SAS_PROTOCOL_SATA:
+       case SAS_PROTOCOL_STP:
+               rc = mvs_task_prep_ata(mvi, &tei);
+               break;
+       default:
+               rc = -EINVAL;
+               break;
+       }
+
+       if (rc)
+               goto err_out_tag;
+
+       /* TODO: select normal or high priority */
+
+       mw32(RX_PROD_IDX, mvi->tx_prod);
+
+       mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_TX_RING_SZ - 1);
+
+       spin_lock(&task->task_state_lock);
+       task->task_state_flags |= SAS_TASK_AT_INITIATOR;
+       spin_unlock(&task->task_state_lock);
+
+       spin_unlock_irqrestore(&mvi->lock, flags);
+       return 0;
+
+err_out_tag:
+       mvs_tag_clear(mvi, tag);
+err_out:
+       if (n_elem)
+               pci_unmap_sg(mvi->pdev, task->scatter, n_elem, task->data_dir);
+       spin_unlock_irqrestore(&mvi->lock, flags);
+       return rc;
+}
+
+static void mvs_free(struct mvs_info *mvi)
+{
+       int i;
+
+       if (!mvi)
+               return;
+
+       for (i = 0; i < MVS_SLOTS; i++) {
+               struct mvs_slot_info *slot = &mvi->slot_info[i];
+
+               if (slot->buf)
+                       dma_free_coherent(&mvi->pdev->dev, MVS_SLOT_BUF_SZ,
+                                         slot->buf, slot->buf_dma);
+       }
+
+       if (mvi->tx)
+               dma_free_coherent(&mvi->pdev->dev,
+                                 sizeof(*mvi->tx) * MVS_TX_RING_SZ,
+                                 mvi->tx, mvi->tx_dma);
+       if (mvi->rx_fis)
+               dma_free_coherent(&mvi->pdev->dev, MVS_RX_FISL_SZ,
+                                 mvi->rx_fis, mvi->rx_fis_dma);
+       if (mvi->rx)
+               dma_free_coherent(&mvi->pdev->dev,
+                                 sizeof(*mvi->rx) * MVS_RX_RING_SZ,
+                                 mvi->rx, mvi->rx_dma);
+       if (mvi->slot)
+               dma_free_coherent(&mvi->pdev->dev,
+                                 sizeof(*mvi->slot) * MVS_RX_RING_SZ,
+                                 mvi->slot, mvi->slot_dma);
+       if (mvi->peri_regs)
+               iounmap(mvi->peri_regs);
+       if (mvi->regs)
+               iounmap(mvi->regs);
+       if (mvi->shost)
+               scsi_host_put(mvi->shost);
+       kfree(mvi->sas.sas_port);
+       kfree(mvi->sas.sas_phy);
+       kfree(mvi);
+}
+
+/* FIXME: locking? */
+static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+                          void *funcdata)
+{
+       struct mvs_info *mvi = sas_phy->ha->lldd_ha;
+       void __iomem *reg;
+       int rc = 0, phy_id = sas_phy->id;
+       u32 tmp;
+
+       reg = mvi->regs + MVS_P0_SER_CTLSTAT + (phy_id * 4);
+
+       switch (func) {
+       case PHY_FUNC_SET_LINK_RATE: {
+               struct sas_phy_linkrates *rates = funcdata;
+               u32 lrmin = 0, lrmax = 0;
+
+               lrmin = (rates->minimum_linkrate << 8);
+               lrmax = (rates->maximum_linkrate << 12);
+
+               tmp = readl(reg);
+               if (lrmin) {
+                       tmp &= ~(0xf << 8);
+                       tmp |= lrmin;
+               }
+               if (lrmax) {
+                       tmp &= ~(0xf << 12);
+                       tmp |= lrmax;
+               }
+               writel(tmp, reg);
+               break;
+       }
+
+       case PHY_FUNC_HARD_RESET:
+               tmp = readl(reg);
+               if (tmp & PHY_RST_HARD)
+                       break;
+               writel(tmp | PHY_RST_HARD, reg);
+               break;
+
+       case PHY_FUNC_LINK_RESET:
+               writel(readl(reg) | PHY_RST, reg);
+               break;
+
+       case PHY_FUNC_DISABLE:
+       case PHY_FUNC_RELEASE_SPINUP_HOLD:
+       default:
+               rc = -EOPNOTSUPP;
+       }
+
+       return rc;
+}
+
+static void __devinit mvs_phy_init(struct mvs_info *mvi, int phy_id)
+{
+       struct mvs_phy *phy = &mvi->phy[phy_id];
+       struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+       sas_phy->enabled = (phy_id < mvi->chip->n_phy) ? 1 : 0;
+       sas_phy->class = SAS;
+       sas_phy->iproto = SAS_PROTOCOL_ALL;
+       sas_phy->tproto = 0;
+       sas_phy->type = PHY_TYPE_PHYSICAL;
+       sas_phy->role = PHY_ROLE_INITIATOR;
+       sas_phy->oob_mode = OOB_NOT_CONNECTED;
+       sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+
+       sas_phy->id = phy_id;
+       sas_phy->sas_addr = &mvi->sas_addr[0];
+       sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+       sas_phy->ha = &mvi->sas;
+       sas_phy->lldd_phy = phy;
+}
+
+static struct mvs_info * __devinit mvs_alloc(struct pci_dev *pdev,
+                               const struct pci_device_id *ent)
+{
+       struct mvs_info *mvi;
+       unsigned long res_start, res_len;
+       struct asd_sas_phy **arr_phy;
+       struct asd_sas_port **arr_port;
+       const struct mvs_chip_info *chip = &mvs_chips[ent->driver_data];
+       int i;
+
+       /*
+        * alloc and init our per-HBA mvs_info struct
+        */
+
+       mvi = kzalloc(sizeof(*mvi), GFP_KERNEL);
+       if (!mvi)
+               return NULL;
+
+       spin_lock_init(&mvi->lock);
+       mvi->pdev = pdev;
+       mvi->chip = chip;
+
+       if (pdev->device == 0x6440 && pdev->revision == 0)
+               mvi->flags |= MVF_PHY_PWR_FIX;
+
+       /*
+        * alloc and init SCSI, SAS glue
+        */
+
+       mvi->shost = scsi_host_alloc(&mvs_sht, sizeof(void *));
+       if (!mvi->shost)
+               goto err_out;
+
+       arr_phy = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
+       arr_port = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
+       if (!arr_phy || !arr_port)
+               goto err_out;
+
+       for (i = 0; i < MVS_MAX_PHYS; i++) {
+               mvs_phy_init(mvi, i);
+               arr_phy[i] = &mvi->phy[i].sas_phy;
+               arr_port[i] = &mvi->port[i].sas_port;
+       }
+
+       SHOST_TO_SAS_HA(mvi->shost) = &mvi->sas;
+       mvi->shost->transportt = mvs_stt;
+       mvi->shost->max_id = ~0;
+       mvi->shost->max_lun = ~0;
+       mvi->shost->max_cmd_len = ~0;
+
+       mvi->sas.sas_ha_name = DRV_NAME;
+       mvi->sas.dev = &pdev->dev;
+       mvi->sas.lldd_module = THIS_MODULE;
+       mvi->sas.sas_addr = &mvi->sas_addr[0];
+       mvi->sas.sas_phy = arr_phy;
+       mvi->sas.sas_port = arr_port;
+       mvi->sas.num_phys = chip->n_phy;
+       mvi->sas.lldd_max_execute_num = MVS_TX_RING_SZ - 1;/* FIXME: correct? */
+       mvi->sas.lldd_queue_size = MVS_TX_RING_SZ - 1;     /* FIXME: correct? */
+       mvi->sas.lldd_ha = mvi;
+       mvi->sas.core.shost = mvi->shost;
+
+       mvs_tag_set(mvi, MVS_TX_RING_SZ - 1);
+
+       /*
+        * ioremap main and peripheral registers
+        */
+
+       res_start = pci_resource_start(pdev, 2);
+       res_len = pci_resource_len(pdev, 2);
+       if (!res_start || !res_len)
+               goto err_out;
+
+       mvi->peri_regs = ioremap_nocache(res_start, res_len);
+       if (!mvi->regs)
+               goto err_out;
+
+       res_start = pci_resource_start(pdev, 4);
+       res_len = pci_resource_len(pdev, 4);
+       if (!res_start || !res_len)
+               goto err_out;
+
+       mvi->regs = ioremap_nocache(res_start, res_len);
+       if (!mvi->regs)
+               goto err_out;
+
+       /*
+        * alloc and init our DMA areas
+        */
+
+       mvi->tx = dma_alloc_coherent(&pdev->dev,
+                                    sizeof(*mvi->tx) * MVS_TX_RING_SZ,
+                                    &mvi->tx_dma, GFP_KERNEL);
+       if (!mvi->tx)
+               goto err_out;
+       memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_TX_RING_SZ);
+
+       mvi->rx_fis = dma_alloc_coherent(&pdev->dev, MVS_RX_FISL_SZ,
+                                    &mvi->rx_fis_dma, GFP_KERNEL);
+       if (!mvi->rx_fis)
+               goto err_out;
+       memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
+
+       mvi->rx = dma_alloc_coherent(&pdev->dev,
+                                    sizeof(*mvi->rx) * MVS_RX_RING_SZ,
+                                    &mvi->rx_dma, GFP_KERNEL);
+       if (!mvi->rx)
+               goto err_out;
+       memset(mvi->rx, 0, sizeof(*mvi->rx) * MVS_RX_RING_SZ);
+
+       mvi->rx[0] = cpu_to_le32(0xfff);
+       mvi->rx_cons = 0xfff;
+
+       mvi->slot = dma_alloc_coherent(&pdev->dev,
+                                      sizeof(*mvi->slot) * MVS_SLOTS,
+                                      &mvi->slot_dma, GFP_KERNEL);
+       if (!mvi->slot)
+               goto err_out;
+       memset(mvi->slot, 0, sizeof(*mvi->slot) * MVS_SLOTS);
+
+       for (i = 0; i < MVS_SLOTS; i++) {
+               struct mvs_slot_info *slot = &mvi->slot_info[i];
+
+               slot->buf = dma_alloc_coherent(&pdev->dev, MVS_SLOT_BUF_SZ,
+                                      &slot->buf_dma, GFP_KERNEL);
+               if (!slot->buf)
+                       goto err_out;
+               memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+       }
+
+       /* finally, read NVRAM to get our SAS address */
+       if (mvs_nvram_read(mvi, NVR_SAS_ADDR, &mvi->sas_addr, 8))
+               goto err_out;
+
+       return mvi;
+
+err_out:
+       mvs_free(mvi);
+       return NULL;
+}
+
+static u32 mvs_cr32(void __iomem *regs, u32 addr)
+{
+       mw32(CMD_ADDR, addr);
+       return mr32(CMD_DATA);
+}
+
+static void mvs_cw32(void __iomem *regs, u32 addr, u32 val)
+{
+       mw32(CMD_ADDR, addr);
+       mw32(CMD_DATA, val);
+}
+
+#if 0
+static u32 mvs_phy_read(struct mvs_info *mvi, unsigned int phy_id, u32 addr)
+{
+       void __iomem *regs = mvi->regs;
+       void __iomem *phy_regs = regs + MVS_P0_CFG_ADDR + (phy_id * 8);
+
+       writel(addr, phy_regs);
+       return readl(phy_regs + 4);
+}
+#endif
+
+static void mvs_phy_write(struct mvs_info *mvi, unsigned int phy_id,
+                         u32 addr, u32 val)
+{
+       void __iomem *regs = mvi->regs;
+       void __iomem *phy_regs = regs + MVS_P0_CFG_ADDR + (phy_id * 8);
+
+       writel(addr, phy_regs);
+       writel(val, phy_regs + 4);
+       readl(phy_regs);        /* flush */
+}
+
+static void __devinit mvs_phy_hacks(struct mvs_info *mvi)
+{
+       void __iomem *regs = mvi->regs;
+       u32 tmp;
+
+       /* workaround for SATA R-ERR, to ignore phy glitch */
+       tmp = mvs_cr32(regs, CMD_PHY_TIMER);
+       tmp &= ~(1 << 9);
+       tmp |= (1 << 10);
+       mvs_cw32(regs, CMD_PHY_TIMER, tmp);
+
+       /* enable retry 127 times */
+       mvs_cw32(regs, CMD_SAS_CTL1, 0x7f7f);
+
+       /* extend open frame timeout to max */
+       tmp = mvs_cr32(regs, CMD_SAS_CTL0);
+       tmp &= ~0xffff;
+       tmp |= 0x3fff;
+       mvs_cw32(regs, CMD_SAS_CTL0, tmp);
+
+       /* workaround for WDTIMEOUT , set to 550 ms */
+       mvs_cw32(regs, CMD_WD_TIMER, 0xffffff);
+
+       /* not to halt for different port op during wideport link change */
+       mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d);
+
+       /* workaround for Seagate disk not-found OOB sequence, recv
+        * COMINIT before sending out COMWAKE */
+       tmp = mvs_cr32(regs, CMD_PHY_MODE_21);
+       tmp &= 0x0000ffff;
+       tmp |= 0x00fa0000;
+       mvs_cw32(regs, CMD_PHY_MODE_21, tmp);
+
+       tmp = mvs_cr32(regs, CMD_PHY_TIMER);
+       tmp &= 0x1fffffff;
+       tmp |= (2U << 29);      /* 8 ms retry */
+       mvs_cw32(regs, CMD_PHY_TIMER, tmp);
+}
+
+static int __devinit mvs_hw_init(struct mvs_info *mvi)
+{
+       void __iomem *regs = mvi->regs;
+       int i;
+       u32 tmp, cctl;
+
+       /* make sure interrupts are masked immediately (paranoia) */
+       mw32(GBL_CTL, 0);
+       tmp = mr32(GBL_CTL);
+
+       if (!(tmp & HBA_RST)) {
+               if (mvi->flags & MVF_PHY_PWR_FIX) {
+                       pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
+                       tmp &= ~PCTL_PWR_ON;
+                       tmp |= PCTL_OFF;
+                       pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+
+                       pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
+                       tmp &= ~PCTL_PWR_ON;
+                       tmp |= PCTL_OFF;
+                       pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+               }
+
+               /* global reset, incl. COMRESET/H_RESET_N (self-clearing) */
+               mw32_f(GBL_CTL, HBA_RST);
+       }
+
+
+       /* wait for reset to finish; timeout is just a guess */
+       i = 1000;
+       while (i-- > 0) {
+               msleep(10);
+
+               if (!(mr32(GBL_CTL) & HBA_RST))
+                       break;
+       }
+       if (mr32(GBL_CTL) & HBA_RST) {
+               dev_printk(KERN_ERR, &mvi->pdev->dev, "HBA reset failed\n");
+               return -EBUSY;
+       }
+
+       /* make sure RST is set; HBA_RST /should/ have done that for us */
+       cctl = mr32(CTL);
+       if (cctl & CCTL_RST)
+               cctl &= ~CCTL_RST;
+       else
+               mw32_f(CTL, cctl | CCTL_RST);
+
+       pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
+       tmp |= PCTL_PWR_ON;
+       tmp &= ~PCTL_OFF;
+       pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+
+       pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
+       tmp |= PCTL_PWR_ON;
+       tmp &= ~PCTL_OFF;
+       pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+
+       mw32_f(CTL, cctl);
+
+       mvs_phy_hacks(mvi);
+
+       mw32(CMD_LIST_LO, mvi->slot_dma);
+       mw32(CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
+
+       mw32(RX_FIS_LO, mvi->rx_fis_dma);
+       mw32(RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
+
+       mw32(TX_CFG, MVS_TX_RING_SZ);
+       mw32(TX_LO, mvi->tx_dma);
+       mw32(TX_HI, (mvi->tx_dma >> 16) >> 16);
+
+       mw32(RX_CFG, MVS_RX_RING_SZ);
+       mw32(RX_LO, mvi->rx_dma);
+       mw32(RX_HI, (mvi->rx_dma >> 16) >> 16);
+
+       /* init and reset phys */
+       for (i = 0; i < mvi->chip->n_phy; i++) {
+               /* FIXME: is this the correct dword order? */
+               u32 lo = *((u32 *) &mvi->sas_addr[0]);
+               u32 hi = *((u32 *) &mvi->sas_addr[4]);
+
+               /* set phy local SAS address */
+               mvs_phy_write(mvi, i, PHYR_ADDR_LO, lo);
+               mvs_phy_write(mvi, i, PHYR_ADDR_HI, hi);
+
+               /* reset phy */
+               tmp = readl(regs + MVS_P0_SER_CTLSTAT + (i * 4));
+               tmp |= PHY_RST;
+               writel(tmp, regs + MVS_P0_SER_CTLSTAT + (i * 4));
+       }
+
+       msleep(100);
+
+       for (i = 0; i < mvi->chip->n_phy; i++) {
+               /* set phy int mask */
+               writel(PHYEV_BROAD_CH | PHYEV_RDY_CH,
+                      regs + MVS_P0_INT_MASK + (i * 8));
+
+               /* clear phy int status */
+               tmp = readl(regs + MVS_P0_INT_STAT + (i * 8));
+               writel(tmp, regs + MVS_P0_INT_STAT + (i * 8));
+       }
+
+       /* FIXME: update wide port bitmaps */
+
+       /* ladies and gentlemen, start your engines */
+       mw32(TX_CFG, MVS_TX_RING_SZ | TX_EN);
+       mw32(RX_CFG, MVS_RX_RING_SZ | RX_EN);
+       mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN |
+            ((mvi->flags & MVF_MSI) ? PCS_SELF_CLEAR : 0));
+
+       /* re-enable interrupts globally */
+       mw32(GBL_CTL, INT_EN);
+
+       return 0;
+}
+
+static void __devinit mvs_print_info(struct mvs_info *mvi)
+{
+       struct pci_dev *pdev = mvi->pdev;
+       static int printed_version;
+
+       if (!printed_version++)
+               dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
+       dev_printk(KERN_INFO, &pdev->dev, "%u phys, addr %llx\n",
+                  mvi->chip->n_phy, SAS_ADDR(mvi->sas_addr));
+}
+
+static int __devinit mvs_pci_init(struct pci_dev *pdev,
+                                const struct pci_device_id *ent)
+{
+       int rc;
+       struct mvs_info *mvi;
+       irq_handler_t irq_handler = mvs_interrupt;
+
+       rc = pci_enable_device(pdev);
+       if (rc)
+               return rc;
+
+       pci_set_master(pdev);
+
+       rc = pci_request_regions(pdev, DRV_NAME);
+       if (rc)
+               goto err_out_disable;
+
+       rc = pci_go_64(pdev);
+       if (rc)
+               goto err_out_regions;
+
+       mvi = mvs_alloc(pdev, ent);
+       if (!mvi) {
+               rc = -ENOMEM;
+               goto err_out_regions;
+       }
+
+       rc = mvs_hw_init(mvi);
+       if (rc)
+               goto err_out_mvi;
+
+       if (!pci_enable_msi(pdev)) {
+               mvi->flags |= MVF_MSI;
+               irq_handler = mvs_msi_interrupt;
+       }
+
+       rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME, mvi);
+       if (rc)
+               goto err_out_msi;
+
+       rc = scsi_add_host(mvi->shost, &pdev->dev);
+       if (rc)
+               goto err_out_irq;
+
+       rc = sas_register_ha(&mvi->sas);
+       if (rc)
+               goto err_out_shost;
+
+       pci_set_drvdata(pdev, mvi);
+
+       mvs_print_info(mvi);
+
+       scsi_scan_host(mvi->shost);
+       return 0;
+
+err_out_shost:
+       scsi_remove_host(mvi->shost);
+err_out_irq:
+       free_irq(pdev->irq, mvi);
+err_out_msi:
+       if (mvi->flags |= MVF_MSI)
+               pci_disable_msi(pdev);
+err_out_mvi:
+       mvs_free(mvi);
+err_out_regions:
+       pci_release_regions(pdev);
+err_out_disable:
+       pci_disable_device(pdev);
+       return rc;
+}
+
+static void __devexit mvs_pci_remove(struct pci_dev *pdev)
+{
+       struct mvs_info *mvi = pci_get_drvdata(pdev);
+
+       pci_set_drvdata(pdev, NULL);
+
+       sas_unregister_ha(&mvi->sas);
+       sas_remove_host(mvi->shost);
+       scsi_remove_host(mvi->shost);
+
+       free_irq(pdev->irq, mvi);
+       if (mvi->flags & MVF_MSI)
+               pci_disable_msi(pdev);
+       mvs_free(mvi);
+       pci_release_regions(pdev);
+       pci_disable_device(pdev);
+}
+
+static struct sas_domain_function_template mvs_transport_ops = {
+       .lldd_execute_task      = mvs_task_exec,
+       .lldd_control_phy       = mvs_phy_control,
+};
+
+static struct pci_device_id __devinitdata mvs_pci_table[] = {
+       { PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
+       { PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
+       { PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
+       { PCI_VDEVICE(MARVELL, 0x6480), chip_6480 },
+
+       { }     /* terminate list */
+};
+
+static struct pci_driver mvs_pci_driver = {
+       .name           = DRV_NAME,
+       .id_table       = mvs_pci_table,
+       .probe          = mvs_pci_init,
+       .remove         = __devexit_p(mvs_pci_remove),
+};
+
+static int __init mvs_init(void)
+{
+       int rc;
+
+       mvs_stt = sas_domain_attach_transport(&mvs_transport_ops);
+       if (!mvs_stt)
+               return -ENOMEM;
+
+       rc = pci_register_driver(&mvs_pci_driver);
+       if (rc)
+               goto err_out;
+
+       return 0;
+
+err_out:
+       sas_release_transport(mvs_stt);
+       return rc;
+}
+
+static void __exit mvs_exit(void)
+{
+       pci_unregister_driver(&mvs_pci_driver);
+       sas_release_transport(mvs_stt);
+}
+
+module_init(mvs_init);
+module_exit(mvs_exit);
+
+MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION("Marvell 88SE6440 SAS/SATA controller driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, mvs_pci_table);
+