/*
- * linux/drivers/ide/pci/hpt366.c Version 0.44 May 20, 2006
+ * linux/drivers/ide/pci/hpt366.c Version 0.45 May 27, 2006
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* - prefix the driver startup messages with the real chip name
* - claim the extra 240 bytes of I/O space for all chips
* - optimize the rate masking/filtering and the drive list lookup code
+ * - use pci_get_slot() to get to the function 1 of HPT36x/374
* <source@mvista.com>
*
*/
static int __devinit init_setup_hpt374(struct pci_dev *dev, ide_pci_device_t *d)
{
- struct pci_dev *findev = NULL;
+ struct pci_dev *dev2;
if (PCI_FUNC(dev->devfn) & 1)
return -ENODEV;
- while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
- if ((findev->vendor == dev->vendor) &&
- (findev->device == dev->device) &&
- ((findev->devfn - dev->devfn) == 1) &&
- (PCI_FUNC(findev->devfn) & 1)) {
- if (findev->irq != dev->irq) {
- /* FIXME: we need a core pci_set_interrupt() */
- findev->irq = dev->irq;
- printk(KERN_WARNING "%s: pci-config space interrupt "
- "fixed.\n", d->name);
- }
- return ide_setup_pci_devices(dev, findev, d);
+ if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) {
+ int ret;
+
+ if (dev2->irq != dev->irq) {
+ /* FIXME: we need a core pci_set_interrupt() */
+ dev2->irq = dev->irq;
+ printk(KERN_WARNING "%s: PCI config space interrupt "
+ "fixed.\n", d->name);
}
+ ret = ide_setup_pci_devices(dev, dev2, d);
+ if (ret < 0)
+ pci_dev_put(dev2);
+ return ret;
}
return ide_setup_pci_device(dev, d);
}
static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
{
- struct pci_dev *findev = NULL;
- u8 rev = 0, pin1 = 0, pin2 = 0;
+ struct pci_dev *dev2;
+ u8 rev = 0;
static char *chipset_names[] = { "HPT366", "HPT366", "HPT368",
"HPT370", "HPT370A", "HPT372",
"HPT372N" };
d->channels = 1;
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
- while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
- if ((findev->vendor == dev->vendor) &&
- (findev->device == dev->device) &&
- ((findev->devfn - dev->devfn) == 1) &&
- (PCI_FUNC(findev->devfn) & 1)) {
- pci_read_config_byte(findev, PCI_INTERRUPT_PIN, &pin2);
- if ((pin1 != pin2) && (dev->irq == findev->irq)) {
- d->bootable = ON_BOARD;
- printk("%s: onboard version of chipset, "
- "pin1=%d pin2=%d\n", d->name,
- pin1, pin2);
- }
- return ide_setup_pci_devices(dev, findev, d);
+ if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) {
+ u8 pin1 = 0, pin2 = 0;
+ int ret;
+
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
+ pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
+ if (pin1 != pin2 && dev->irq == dev2->irq) {
+ d->bootable = ON_BOARD;
+ printk("%s: onboard version of chipset, pin1=%d pin2=%d\n",
+ d->name, pin1, pin2);
}
+ ret = ide_setup_pci_devices(dev, dev2, d);
+ if (ret < 0)
+ pci_dev_put(dev2);
+ return ret;
}
init_single:
return ide_setup_pci_device(dev, d);