[libata] fix 'if(' and similar areas that lack whitespace

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 0f6f7bcc3defa8e39bdb235bcdd7b18e086b4614..e4542ab9c7f840fcf59102c8e92bb6422f79ff48 100644 (file)
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -181,7 +181,7 @@ static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev)
        int unit = adev->devno;
        struct pata_acpi *acpi = ap->private_data;
 
-       if(!(acpi->gtm.flags & 0x10))
+       if (!(acpi->gtm.flags & 0x10))
                unit = 0;
 
        /* Now stuff the nS values into the structure */
@@ -202,7 +202,7 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
        int unit = adev->devno;
        struct pata_acpi *acpi = ap->private_data;
 
-       if(!(acpi->gtm.flags & 0x10))
+       if (!(acpi->gtm.flags & 0x10))
                unit = 0;
 
        /* Now stuff the nS values into the structure */

diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 6b07b5b48532ff015a9f6ef08dd7619e1c7561d6..f9b485a487ae75c7da9ed0097e241a898154df81 100644 (file)
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -449,7 +449,7 @@ static int optiplus_with_udma(struct pci_dev *pdev)
 
        /* Find function 1 */
        dev1 = pci_get_device(0x1045, 0xC701, NULL);
-       if(dev1 == NULL)
+       if (dev1 == NULL)
                return 0;
 
        /* Rev must be >= 0x10 */

diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 3d3f1558cdee7e9be3c9e92e3059c711b4ad3478..2622577521a13386f655aa70d922f2a94596efd2 100644 (file)
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -348,7 +348,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
        ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
                          ATA_ID_PROD_LEN + 1);
        /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
-       if(strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
+       if (strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
                mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
 
        return ata_pci_default_filter(adev, mask);

diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 65d951618c605d1c9e908a508c528014ac4b2b6c..bc7c2d5d8d5ecee9fbc5fa93e98b19d7fb783e26 100644 (file)
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -351,9 +351,9 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
                struct pci_dev *bridge = dev->bus->self;
                /* Don't grab anything behind a Promise I2O RAID */
                if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) {
-                       if( bridge->device == PCI_DEVICE_ID_INTEL_I960)
+                       if (bridge->device == PCI_DEVICE_ID_INTEL_I960)
                                return -ENODEV;
-                       if( bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
+                       if (bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
                                return -ENODEV;
                }
        }

diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index ea7a9a652e6118c8ab1cc2c20088abcb67670067..a4175fbdd1704dcf6c231dcf6bf55b0552d3f1b5 100644 (file)
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -176,7 +176,7 @@ static int via_cable_detect(struct ata_port *ap) {
        if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
                return ATA_CBL_PATA40;
        /* UDMA 66 chips have only drive side logic */
-       else if((config->flags & VIA_UDMA) < VIA_UDMA_100)
+       else if ((config->flags & VIA_UDMA) < VIA_UDMA_100)
                return ATA_CBL_PATA_UNK;
        /* UDMA 100 or later */
        pci_read_config_dword(pdev, 0x50, &ata66);

diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 549cbbe9fd07f21162baa54cd16270fc3f79b6b1..311cdb3a5566caec1d60e788327f3004fc662b8d 100644 (file)
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -279,7 +279,7 @@ static __init int winbond_init(void)
 
                        if (request_region(port, 2, "pata_winbond")) {
                                ret = winbond_init_one(port);
-                               if(ret <= 0)
+                               if (ret <= 0)
                                        release_region(port, 2);
                                else ct+= ret;
                        }

diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index f1b422f7c74937f43dc32848d506dbd4620d5673..8d55f7fb50af4e644ffd21aaa42d8c303ec8b161 100644 (file)
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1012,7 +1012,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
                                u32 check_commands;
                                int pos, error = 0;
 
-                               if(ata_tag_valid(ap->link.active_tag))
+                               if (ata_tag_valid(ap->link.active_tag))
                                        check_commands = 1 << ap->link.active_tag;
                                else
                                        check_commands = ap->link.sactive;
@@ -1028,7 +1028,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
                }
        }
 
-       if(notifier_clears[0] || notifier_clears[1]) {
+       if (notifier_clears[0] || notifier_clears[1]) {
                /* Note: Both notifier clear registers must be written
                   if either is set, even if one is zero, according to NVIDIA. */
                struct nv_adma_port_priv *pp = host->ports[0]->private_data;
@@ -1119,7 +1119,7 @@ static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
 {
        struct nv_adma_port_priv *pp = qc->ap->private_data;
 
-       if(pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+       if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
                ata_bmdma_post_internal_cmd(qc);
 }
 
@@ -1194,10 +1194,10 @@ static int nv_adma_port_start(struct ata_port *ap)
 
        tmp = readw(mmio + NV_ADMA_CTL);
        writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-       readw( mmio + NV_ADMA_CTL );    /* flush posted write */
+       readw(mmio + NV_ADMA_CTL );     /* flush posted write */
        udelay(1);
        writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-       readw( mmio + NV_ADMA_CTL );    /* flush posted write */
+       readw(mmio + NV_ADMA_CTL );     /* flush posted write */
 
        return 0;
 }
@@ -1255,10 +1255,10 @@ static int nv_adma_port_resume(struct ata_port *ap)
 
        tmp = readw(mmio + NV_ADMA_CTL);
        writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-       readw( mmio + NV_ADMA_CTL );    /* flush posted write */
+       readw(mmio + NV_ADMA_CTL );     /* flush posted write */
        udelay(1);
        writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-       readw( mmio + NV_ADMA_CTL );    /* flush posted write */
+       readw(mmio + NV_ADMA_CTL );     /* flush posted write */
 
        return 0;
 }
@@ -1359,12 +1359,12 @@ static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc)
        /* ADMA engine can only be used for non-ATAPI DMA commands,
           or interrupt-driven no-data commands, where a result taskfile
           is not required. */
-       if((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
+       if ((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
           (qc->tf.flags & ATA_TFLAG_POLLING) ||
           (qc->flags & ATA_QCFLAG_RESULT_TF))
                return 1;
 
-       if((qc->flags & ATA_QCFLAG_DMAMAP) ||
+       if ((qc->flags & ATA_QCFLAG_DMAMAP) ||
           (qc->tf.protocol == ATA_PROT_NODATA))
                return 0;
 
@@ -1401,7 +1401,7 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
 
        nv_adma_tf_to_cpb(&qc->tf, cpb->tf);
 
-       if(qc->flags & ATA_QCFLAG_DMAMAP) {
+       if (qc->flags & ATA_QCFLAG_DMAMAP) {
                nv_adma_fill_sg(qc, cpb);
                ctl_flags |= NV_CPB_CTL_APRD_VALID;
        } else
@@ -1435,7 +1435,7 @@ static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
           and (number of cpbs to append -1) in top 8 bits */
        wmb();
 
-       if(curr_ncq != pp->last_issue_ncq) {
+       if (curr_ncq != pp->last_issue_ncq) {
                /* Seems to need some delay before switching between NCQ and non-NCQ
                   commands, else we get command timeouts and such. */
                udelay(20);
@@ -1641,12 +1641,12 @@ static void nv_error_handler(struct ata_port *ap)
 static void nv_adma_error_handler(struct ata_port *ap)
 {
        struct nv_adma_port_priv *pp = ap->private_data;
-       if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
+       if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
                void __iomem *mmio = pp->ctl_block;
                int i;
                u16 tmp;
 
-               if(ata_tag_valid(ap->link.active_tag) || ap->link.sactive) {
+               if (ata_tag_valid(ap->link.active_tag) || ap->link.sactive) {
                        u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
                        u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
                        u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
@@ -1660,9 +1660,9 @@ static void nv_adma_error_handler(struct ata_port *ap)
                                notifier, notifier_error, gen_ctl, status,
                                cpb_count, next_cpb_idx);
 
-                       for( i=0;i<NV_ADMA_MAX_CPBS;i++) {
+                       for (i = 0; i < NV_ADMA_MAX_CPBS; i++) {
                                struct nv_adma_cpb *cpb = &pp->cpb[i];
-                               if( (ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) ||
+                               if ((ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) ||
                                    ap->link.sactive & (1 << i) )
                                        ata_port_printk(ap, KERN_ERR,
                                                "CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
@@ -1674,7 +1674,7 @@ static void nv_adma_error_handler(struct ata_port *ap)
                nv_adma_register_mode(ap);
 
                /* Mark all of the CPBs as invalid to prevent them from being executed */
-               for( i=0;i<NV_ADMA_MAX_CPBS;i++)
+               for (i = 0; i < NV_ADMA_MAX_CPBS; i++)
                        pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID;
 
                /* clear CPB fetch count */
@@ -1683,10 +1683,10 @@ static void nv_adma_error_handler(struct ata_port *ap)
                /* Reset channel */
                tmp = readw(mmio + NV_ADMA_CTL);
                writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-               readw( mmio + NV_ADMA_CTL );    /* flush posted write */
+               readw(mmio + NV_ADMA_CTL);      /* flush posted write */
                udelay(1);
                writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-               readw( mmio + NV_ADMA_CTL );    /* flush posted write */
+               readw(mmio + NV_ADMA_CTL);      /* flush posted write */
        }
 
        ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
@@ -2440,32 +2440,32 @@ static int nv_pci_device_resume(struct pci_dev *pdev)
        int rc;
 
        rc = ata_pci_device_do_resume(pdev);
-       if(rc)
+       if (rc)
                return rc;
 
        if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-               if(hpriv->type >= CK804) {
+               if (hpriv->type >= CK804) {
                        u8 regval;
 
                        pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, &regval);
                        regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
                        pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
                }
-               if(hpriv->type == ADMA) {
+               if (hpriv->type == ADMA) {
                        u32 tmp32;
                        struct nv_adma_port_priv *pp;
                        /* enable/disable ADMA on the ports appropriately */
                        pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
 
                        pp = host->ports[0]->private_data;
-                       if(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
+                       if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
                                tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
                                           NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
                        else
                                tmp32 |=  (NV_MCP_SATA_CFG_20_PORT0_EN |
                                           NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
                        pp = host->ports[1]->private_data;
-                       if(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
+                       if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
                                tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT1_EN |
                                           NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
                        else

diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index b6026bceccd1628325ab2b2a6953196059932b5c..16b3b8a7924bcc3d7091d39af50a98a8e3b48589 100644 (file)
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -1091,7 +1091,7 @@ static int pdc20621_detect_dimm(struct ata_host *host)
                return 0;
 
        if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) {
-               if(data <= 0x75)
+               if (data <= 0x75)
                        return 133;
        } else
                return 0;
@@ -1254,7 +1254,7 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
           If SX4 is on PCI-X bus, after 3 seconds, the timer counter
           register should be >= (0xffffffff - 3x10^8).
        */
-       if(tcount >= PCI_X_TCOUNT) {
+       if (tcount >= PCI_X_TCOUNT) {
                ticks = (time_period - tcount);
                VPRINTK("Num counters 0x%x (%d)\n", ticks, ticks);