#define ASC_DCNT __u32 /* Unsigned Data count type. */
#define ASC_SDCNT __s32 /* Signed Data count type. */
-/*
- * These macros are used to convert a virtual address to a
- * 32-bit value. This currently can be used on Linux Alpha
- * which uses 64-bit virtual address but a 32-bit bus address.
- * This is likely to break in the future, but doing this now
- * will give us time to change the HW and FW to handle 64-bit
- * addresses.
- */
-#define ASC_VADDR_TO_U32 virt_to_bus
-#define ASC_U32_TO_VADDR bus_to_virt
-
typedef unsigned char uchar;
#ifndef TRUE
uchar min_sdtr_index;
uchar max_sdtr_index;
struct asc_board *drv_ptr;
+ int ptr_map_count;
+ void **ptr_map;
ASC_DCNT uc_break;
} ASC_DVC_VAR;
}
#endif /* ADVANSYS_DEBUG */
+/*
+ * The advansys chip/microcode contains a 32-bit identifier for each command
+ * known as the 'srb'. I don't know what it stands for. The driver used
+ * to encode the scsi_cmnd pointer by calling virt_to_bus and retrieve it
+ * with bus_to_virt. Now the driver keeps a per-host map of integers to
+ * pointers. It auto-expands when full, unless it can't allocate memory.
+ * Note that an srb of 0 is treated specially by the chip/firmware, hence
+ * the return of i+1 in this routine, and the corresponding subtraction in
+ * the inverse routine.
+ */
+#define BAD_SRB 0
+static u32 advansys_ptr_to_srb(struct asc_dvc_var *asc_dvc, void *ptr)
+{
+ int i;
+ void **new_ptr;
+
+ for (i = 0; i < asc_dvc->ptr_map_count; i++) {
+ if (!asc_dvc->ptr_map[i])
+ goto out;
+ }
+
+ if (asc_dvc->ptr_map_count == 0)
+ asc_dvc->ptr_map_count = 1;
+ else
+ asc_dvc->ptr_map_count *= 2;
+
+ new_ptr = krealloc(asc_dvc->ptr_map,
+ asc_dvc->ptr_map_count * sizeof(void *), GFP_ATOMIC);
+ if (!new_ptr)
+ return BAD_SRB;
+ asc_dvc->ptr_map = new_ptr;
+ out:
+ ASC_DBG(3, "Putting ptr %p into array offset %d\n", ptr, i);
+ asc_dvc->ptr_map[i] = ptr;
+ return i + 1;
+}
+
+static void * advansys_srb_to_ptr(struct asc_dvc_var *asc_dvc, u32 srb)
+{
+ void *ptr;
+
+ srb--;
+ if (srb >= asc_dvc->ptr_map_count) {
+ printk("advansys: bad SRB %u, max %u\n", srb,
+ asc_dvc->ptr_map_count);
+ return NULL;
+ }
+ ptr = asc_dvc->ptr_map[srb];
+ asc_dvc->ptr_map[srb] = NULL;
+ ASC_DBG(3, "Returning ptr %p from array offset %d\n", ptr, srb);
+ return ptr;
+}
+
/*
* advansys_info()
*
ASC_DBG(1, "asc_dvc_varp 0x%p, qdonep 0x%p\n", asc_dvc_varp, qdonep);
ASC_DBG_PRT_ASC_QDONE_INFO(2, qdonep);
- /*
- * Get the struct scsi_cmnd structure and Scsi_Host structure for the
- * command that has been completed.
- */
- scp = (struct scsi_cmnd *)ASC_U32_TO_VADDR(qdonep->d2.srb_ptr);
- ASC_DBG(1, "scp 0x%p\n", scp);
-
- if (scp == NULL) {
- ASC_PRINT("asc_isr_callback: scp is NULL\n");
+ scp = advansys_srb_to_ptr(asc_dvc_varp, qdonep->d2.srb_ptr);
+ if (!scp)
return;
- }
+
ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len);
shost = scp->device->host;
boardp = shost_priv(shost);
BUG_ON(asc_dvc_varp != &boardp->dvc_var.asc_dvc_var);
+ dma_unmap_single(boardp->dev, scp->SCp.dma_handle,
+ sizeof(scp->sense_buffer), DMA_FROM_DEVICE);
/*
* 'qdonep' contains the command's ending status.
*/
return 0;
}
+static __le32 advansys_get_sense_buffer_dma(struct scsi_cmnd *scp)
+{
+ struct asc_board *board = shost_priv(scp->device->host);
+ scp->SCp.dma_handle = dma_map_single(board->dev, scp->sense_buffer,
+ sizeof(scp->sense_buffer), DMA_FROM_DEVICE);
+ dma_cache_sync(board->dev, scp->sense_buffer,
+ sizeof(scp->sense_buffer), DMA_FROM_DEVICE);
+ return cpu_to_le32(scp->SCp.dma_handle);
+}
+
static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
struct asc_scsi_q *asc_scsi_q)
{
+ struct asc_dvc_var *asc_dvc = &boardp->dvc_var.asc_dvc_var;
int use_sg;
memset(asc_scsi_q, 0, sizeof(*asc_scsi_q));
/*
* Point the ASC_SCSI_Q to the 'struct scsi_cmnd'.
*/
- asc_scsi_q->q2.srb_ptr = ASC_VADDR_TO_U32(scp);
+ asc_scsi_q->q2.srb_ptr = advansys_ptr_to_srb(asc_dvc, scp);
+ if (asc_scsi_q->q2.srb_ptr == BAD_SRB) {
+ scp->result = HOST_BYTE(DID_SOFT_ERROR);
+ return ASC_ERROR;
+ }
/*
* Build the ASC_SCSI_Q request.
asc_scsi_q->q1.target_lun = scp->device->lun;
asc_scsi_q->q2.target_ix =
ASC_TIDLUN_TO_IX(scp->device->id, scp->device->lun);
- asc_scsi_q->q1.sense_addr =
- cpu_to_le32(virt_to_bus(&scp->sense_buffer[0]));
+ asc_scsi_q->q1.sense_addr = advansys_get_sense_buffer_dma(scp);
asc_scsi_q->q1.sense_len = sizeof(scp->sense_buffer);
/*
* started request.
*
*/
- if ((boardp->dvc_var.asc_dvc_var.cur_dvc_qng[scp->device->id] > 0) &&
+ if ((asc_dvc->cur_dvc_qng[scp->device->id] > 0) &&
(boardp->reqcnt[scp->device->id] % 255) == 0) {
asc_scsi_q->q2.tag_code = MSG_ORDERED_TAG;
} else {
/*
* Set the ADV_SCSI_REQ_Q 'srb_ptr' to point to the adv_req_t structure.
*/
- scsiqp->srb_ptr = ASC_VADDR_TO_U32(reqp);
+ scsiqp->srb_ptr = ADV_VADDR_TO_U32(reqp);
/*
* Set the adv_req_t 'cmndp' to point to the struct scsi_cmnd structure.