ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev);
+static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
+ void (*done)(struct scsi_cmnd *))
+{
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ done(cmd);
+}
+
/**
* ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
* @sdev: SCSI device for which BIOS geometry is to be determined
{
struct scsi_cmnd *cmd = qc->scsicmd;
u8 err = 0;
- unsigned char *sb = cmd->sense_buffer;
/* Based on the 3ware driver translation table */
static unsigned char sense_table[][4] = {
/* BBD|ECC|ID|MAR */
};
int i = 0;
- cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
-
/*
* Is this an error we can process/parse
*/
/* Look for best matches first */
if((sense_table[i][0] & err) == sense_table[i][0])
{
- sb[0] = 0x70;
- sb[2] = sense_table[i][1];
- sb[7] = 0x0a;
- sb[12] = sense_table[i][2];
- sb[13] = sense_table[i][3];
+ ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
+ sense_table[i][2] /* asc */,
+ sense_table[i][3] /* ascq */ );
return;
}
i++;
{
if(stat_table[i][0] & drv_stat)
{
- sb[0] = 0x70;
- sb[2] = stat_table[i][1];
- sb[7] = 0x0a;
- sb[12] = stat_table[i][2];
- sb[13] = stat_table[i][3];
+ ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
+ sense_table[i][2] /* asc */,
+ sense_table[i][3] /* ascq */ );
return;
}
i++;
printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
/* additional-sense-code[-qualifier] */
- sb[0] = 0x70;
- sb[2] = MEDIUM_ERROR;
- sb[7] = 0x0A;
if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
- sb[12] = 0x11; /* "unrecovered read error" */
- sb[13] = 0x04;
+ ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0x11, 0x4);
+ /* "unrecovered read error" */
} else {
- sb[12] = 0x0C; /* "write error - */
- sb[13] = 0x02; /* auto-reallocation failed" */
+ ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0xc, 0x2);
+ /* "write error - auto-reallocation failed" */
}
}
; /* ignore IMMED bit, violates sat-r05 */
}
if (scsicmd[4] & 0x2)
- return 1; /* LOEJ bit set not supported */
+ goto invalid_fld; /* LOEJ bit set not supported */
if (((scsicmd[4] >> 4) & 0xf) != 0)
- return 1; /* power conditions not supported */
+ goto invalid_fld; /* power conditions not supported */
if (scsicmd[4] & 0x1) {
tf->nsect = 1; /* 1 sector, lba=0 */
*/
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
}
else if (scsicmd[0] == VERIFY_16)
scsi_16_lba_len(scsicmd, &block, &n_block);
else
- return 1;
+ goto invalid_fld;
if (!n_block)
- return 1;
+ goto nothing_to_do;
if (block >= dev_sectors)
- return 1;
+ goto out_of_range;
if ((block + n_block) > dev_sectors)
- return 1;
+ goto out_of_range;
if (lba48) {
if (n_block > (64 * 1024))
- return 1;
+ goto invalid_fld;
} else {
if (n_block > 256)
- return 1;
+ goto invalid_fld;
}
if (lba) {
Head: 0-15
Sector: 1-255*/
if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
- return 1;
+ goto out_of_range;
tf->command = ATA_CMD_VERIFY;
tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
}
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+out_of_range:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ /* "Logical Block Address out of range" */
+ return 1;
+
+nothing_to_do:
+ qc->scsicmd->result = SAM_STAT_GOOD;
+ return 1;
}
/**
break;
default:
DPRINTK("no-byte command\n");
- return 1;
+ goto invalid_fld;
}
/* Check and compose ATA command */
* However, for ATA R/W commands, sector count 0 means
* 256 or 65536 sectors, not 0 sectors as in SCSI.
*/
- return 1;
+ goto nothing_to_do;
if (lba) {
if (lba48) {
/* The request -may- be too large for LBA48. */
if ((block >> 48) || (n_block > 65536))
- return 1;
+ goto out_of_range;
tf->hob_nsect = (n_block >> 8) & 0xff;
/* The request -may- be too large for LBA28. */
if ((block >> 28) || (n_block > 256))
- return 1;
+ goto out_of_range;
tf->device |= (block >> 24) & 0xf;
}
/* The request -may- be too large for CHS addressing. */
if ((block >> 28) || (n_block > 256))
- return 1;
+ goto out_of_range;
/* Convert LBA to CHS */
track = (u32)block / dev->sectors;
Head: 0-15
Sector: 1-255*/
if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
- return 1;
+ goto out_of_range;
qc->nsect = n_block;
tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
}
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+out_of_range:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ /* "Logical Block Address out of range" */
+ return 1;
+
+nothing_to_do:
+ qc->scsicmd->result = SAM_STAT_GOOD;
+ return 1;
}
static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
* This function sets up an ata_queued_cmd structure for the
* SCSI command, and sends that ata_queued_cmd to the hardware.
*
+ * The xlat_func argument (actor) returns 0 if ready to execute
+ * ATA command, else 1 to finish translation. If 1 is returned
+ * then cmd->result (and possibly cmd->sense_buffer) are assumed
+ * to be set reflecting an error condition or clean (early)
+ * termination.
+ *
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
qc = ata_scsi_qc_new(ap, dev, cmd, done);
if (!qc)
- return;
+ goto err_mem;
/* data is present; dma-map it */
if (cmd->sc_data_direction == DMA_FROM_DEVICE ||
if (unlikely(cmd->request_bufflen < 1)) {
printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n",
ap->id, dev->devno);
- goto err_out;
+ goto err_did;
}
if (cmd->use_sg)
qc->complete_fn = ata_scsi_qc_complete;
if (xlat_func(qc, scsicmd))
- goto err_out;
+ goto early_finish;
/* select device, send command to hardware */
if (ata_qc_issue(qc))
- goto err_out;
+ goto err_did;
VPRINTK("EXIT\n");
return;
-err_out:
+early_finish:
+ ata_qc_free(qc);
+ done(cmd);
+ DPRINTK("EXIT - early finish (good or error)\n");
+ return;
+
+err_did:
ata_qc_free(qc);
- ata_bad_cdb(cmd, done);
- DPRINTK("EXIT - badcmd\n");
+err_mem:
+ cmd->result = (DID_ERROR << 16);
+ done(cmd);
+ DPRINTK("EXIT - internal\n");
+ return;
}
/**
* Mapping the response buffer, calling the command's handler,
* and handling the handler's return value. This return value
* indicates whether the handler wishes the SCSI command to be
- * completed successfully, or not.
+ * completed successfully (0), or not (in which case cmd->result
+ * and sense buffer are assumed to be set).
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
rc = actor(args, rbuf, buflen);
ata_scsi_rbuf_put(cmd, rbuf);
- if (rc)
- ata_bad_cdb(cmd, args->done);
- else {
+ if (rc == 0)
cmd->result = SAM_STAT_GOOD;
- args->done(cmd);
- }
+ args->done(cmd);
}
/**
* in the same manner)
*/
page_control = scsicmd[2] >> 6;
- if ((page_control != 0) && (page_control != 3))
- return 1;
+ switch (page_control) {
+ case 0: /* current */
+ break; /* supported */
+ case 3: /* saved */
+ goto saving_not_supp;
+ case 1: /* changeable */
+ case 2: /* defaults */
+ default:
+ goto invalid_fld;
+ }
if (six_byte)
output_len = 4;
break;
default: /* invalid page code */
- return 1;
+ goto invalid_fld;
}
if (six_byte) {
}
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+saving_not_supp:
+ ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0);
+ /* "Saving parameters not supported" */
+ return 1;
}
/**
void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq)
{
DPRINTK("ENTER\n");
- cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
-
- cmd->sense_buffer[0] = 0x70;
- cmd->sense_buffer[2] = ILLEGAL_REQUEST;
- cmd->sense_buffer[7] = 14 - 8; /* addnl. sense len. FIXME: correct? */
- cmd->sense_buffer[12] = asc;
- cmd->sense_buffer[13] = ascq;
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq);
done(cmd);
}
case INQUIRY:
if (scsicmd[1] & 2) /* is CmdDt set? */
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std);
else if (scsicmd[2] == 0x00)
else if (scsicmd[2] == 0x83)
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83);
else
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case MODE_SENSE:
case MODE_SELECT: /* unconditionally return */
case MODE_SELECT_10: /* bad-field-in-cdb */
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case READ_CAPACITY:
if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16)
ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
else
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case REPORT_LUNS:
/* all other commands */
default:
- ata_bad_scsiop(cmd, done);
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0);
+ /* "Invalid command operation code" */
+ done(cmd);
break;
}
}
projects / linux-2.6 / commitdiff