camera drivers.
To compile this driver as a module, choose M here: the
- module will be called ovcamchip
+ module will be called ovcamchip.
config VIDEO_M32R_AR
tristate "AR devices"
Support for the Micronas MSP34xx series of audio decoders.
To compile this driver as a module, choose M here: the
- module will be called msp3400
+ module will be called msp3400.
config VIDEO_CS53L32A
tristate "Cirrus Logic CS53L32A audio ADC"
stereo A/D converter.
To compile this driver as a module, choose M here: the
- module will be called cs53l32a
+ module will be called cs53l32a.
config VIDEO_WM8775
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
performance stereo A/D Converter with a 4 channel input mixer.
To compile this driver as a module, choose M here: the
- module will be called wm8775
+ module will be called wm8775.
config VIDEO_WM8739
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
stereo A/D Converter.
To compile this driver as a module, choose M here: the
- module will be called wm8739
+ module will be called wm8739.
source "drivers/media/video/cx25840/Kconfig"
Support for the Philips SAA7113/4/5 video decoders.
To compile this driver as a module, choose M here: the
- module will be called saa7115
+ module will be called saa7115.
config VIDEO_SAA7127
tristate "Philips SAA7127/9 digital video encoders"
Support for the Philips SAA7127/9 digital video encoders.
To compile this driver as a module, choose M here: the
- module will be called saa7127
+ module will be called saa7127.
+
+config VIDEO_UPD64031A
+ tristate "NEC Electronics uPD64031A Ghost Reduction"
+ depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ ---help---
+ Support for the NEC Electronics uPD64031A Ghost Reduction
+ video chip. It is most often found in NTSC TV cards made for
+ Japan and is used to reduce the 'ghosting' effect that can
+ be present in analog TV broadcasts.
+
+ To compile this driver as a module, choose M here: the
+ module will be called upd64031a.
+
+config VIDEO_UPD64083
+ tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
+ depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ ---help---
+ Support for the NEC Electronics uPD64083 3-Dimensional Y/C
+ separation video chip. It is used to improve the quality of
+ the colors of a composite signal.
+
+ To compile this driver as a module, choose M here: the
+ module will be called upd64083.
endmenu # encoder / decoder chips
obj-$(CONFIG_VIDEO_CX25840) += cx25840/
obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o
obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o
+obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
+obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_DSBR) += dsbr100.o
--- /dev/null
+/*
+ * upd64031A - NEC Electronics Ghost Reduction for NTSC in Japan
+ *
+ * 2003 by T.Adachi <tadachi@tadachi-net.com>
+ * 2003 by Takeru KOMORIYA <komoriya@paken.org>
+ * 2006 by Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/upd64031a.h>
+
+// --------------------- read registers functions define -----------------------
+
+/* bit masks */
+#define GR_MODE_MASK 0xc0
+#define DIRECT_3DYCS_CONNECT_MASK 0xc0
+#define SYNC_CIRCUIT_MASK 0xa0
+
+// -----------------------------------------------------------------------------
+
+MODULE_DESCRIPTION("uPD64031A driver");
+MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil");
+MODULE_LICENSE("GPL");
+
+static int debug = 0;
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+static unsigned short normal_i2c[] = { 0x24 >> 1, 0x26 >> 1, I2C_CLIENT_END };
+
+
+I2C_CLIENT_INSMOD;
+
+enum {
+ R00 = 0, R01, R02, R03, R04,
+ R05, R06, R07, R08, R09,
+ R0A, R0B, R0C, R0D, R0E, R0F,
+ /* unused registers
+ R10, R11, R12, R13, R14,
+ R15, R16, R17,
+ */
+ TOT_REGS
+};
+
+struct upd64031a_state {
+ u8 regs[TOT_REGS];
+ u8 gr_mode;
+ u8 direct_3dycs_connect;
+ u8 ext_comp_sync;
+ u8 ext_vert_sync;
+};
+
+static u8 upd64031a_init[] = {
+ 0x00, 0xb8, 0x48, 0xd2, 0xe6,
+ 0x03, 0x10, 0x0b, 0xaf, 0x7f,
+ 0x00, 0x00, 0x1d, 0x5e, 0x00,
+ 0xd0
+};
+
+/* ------------------------------------------------------------------------ */
+
+static u8 upd64031a_read(struct i2c_client *client, u8 reg)
+{
+ u8 buf[2];
+
+ if (reg >= sizeof(buf))
+ return 0xff;
+ i2c_master_recv(client, buf, 2);
+ return buf[reg];
+}
+
+/* ------------------------------------------------------------------------ */
+
+static void upd64031a_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ u8 buf[2];
+
+ buf[0] = reg;
+ buf[1] = val;
+ v4l_dbg(1, debug, client, "writing reg addr: %02X val: %02X\n", reg, val);
+ if (i2c_master_send(client, buf, 2) != 2)
+ v4l_err(client, "I/O error write 0x%02x/0x%02x\n", reg, val);
+}
+
+/* ------------------------------------------------------------------------ */
+
+/* The input changed due to new input or channel changed */
+static void upd64031a_change(struct i2c_client *client)
+{
+ struct upd64031a_state *state = i2c_get_clientdata(client);
+ u8 reg = state->regs[R00];
+
+ v4l_dbg(1, debug, client, "changed input or channel\n");
+ upd64031a_write(client, R00, reg | 0x10);
+ upd64031a_write(client, R00, reg & ~0x10);
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int upd64031a_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+ struct upd64031a_state *state = i2c_get_clientdata(client);
+ struct v4l2_routing *route = arg;
+
+ switch (cmd) {
+ case VIDIOC_S_FREQUENCY:
+ upd64031a_change(client);
+ break;
+
+ case VIDIOC_INT_G_VIDEO_ROUTING:
+ route->input = (state->gr_mode >> 6) |
+ (state->direct_3dycs_connect >> 4) |
+ (state->ext_comp_sync >> 1) |
+ (state->ext_vert_sync >> 2);
+ route->output = 0;
+ break;
+
+ case VIDIOC_INT_S_VIDEO_ROUTING:
+ {
+ u8 r00, r05, r08;
+
+ state->gr_mode = (route->input & 3) << 6;
+ state->direct_3dycs_connect = (route->input & 0xc) << 4;
+ state->ext_comp_sync = (route->input & UPD64031A_COMPOSITE_EXTERNAL) << 1;
+ state->ext_vert_sync = (route->input & UPD64031A_VERTICAL_EXTERNAL) << 2;
+ r00 = (state->regs[R00] & ~GR_MODE_MASK) | state->gr_mode;
+ r05 = (state->regs[R00] & ~SYNC_CIRCUIT_MASK) |
+ state->ext_comp_sync | state->ext_vert_sync;
+ r08 = (state->regs[R08] & ~DIRECT_3DYCS_CONNECT_MASK) |
+ state->direct_3dycs_connect;
+ upd64031a_write(client, R00, r00);
+ upd64031a_write(client, R05, r05);
+ upd64031a_write(client, R08, r08);
+ upd64031a_change(client);
+ break;
+ }
+
+ case VIDIOC_LOG_STATUS:
+ v4l_info(client, "Status: SA00=0x%02x SA01=0x%02x\n",
+ upd64031a_read(client, 0), upd64031a_read(client, 1));
+ break;
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ case VIDIOC_INT_G_REGISTER:
+ {
+ struct v4l2_register *reg = arg;
+
+ if (reg->i2c_id != I2C_DRIVERID_UPD64031A)
+ return -EINVAL;
+ reg->val = upd64031a_read(client, reg->reg & 0xff);
+ break;
+ }
+
+ case VIDIOC_INT_S_REGISTER:
+ {
+ struct v4l2_register *reg = arg;
+ u8 addr = reg->reg & 0xff;
+ u8 val = reg->val & 0xff;
+
+ if (reg->i2c_id != I2C_DRIVERID_UPD64031A)
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ upd64031a_write(client, addr, val);
+ break;
+ }
+#endif
+
+ default:
+ break;
+ }
+ return 0;
+}
+
+/* ------------------------------------------------------------------------ */
+
+/* i2c implementation */
+
+static struct i2c_driver i2c_driver;
+
+static int upd64031a_attach(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct upd64031a_state *state;
+ int i;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return 0;
+
+ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (client == NULL) {
+ return -ENOMEM;
+ }
+
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &i2c_driver;
+ snprintf(client->name, sizeof(client->name) - 1, "uPD64031A");
+
+ v4l_info(client, "chip found @ 0x%x (%s)\n", address << 1, adapter->name);
+
+ state = kmalloc(sizeof(struct upd64031a_state), GFP_KERNEL);
+ if (state == NULL) {
+ kfree(client);
+ return -ENOMEM;
+ }
+ i2c_set_clientdata(client, state);
+ memcpy(state->regs, upd64031a_init, sizeof(state->regs));
+ state->gr_mode = UPD64031A_GR_ON << 6;
+ state->direct_3dycs_connect = UPD64031A_3DYCS_COMPOSITE << 4;
+ state->ext_comp_sync = state->ext_vert_sync = 0;
+ for (i = 0; i < TOT_REGS; i++) {
+ upd64031a_write(client, i, state->regs[i]);
+ }
+
+ i2c_attach_client(client);
+
+ return 0;
+}
+
+static int upd64031a_probe(struct i2c_adapter *adapter)
+{
+ if (adapter->class & I2C_CLASS_TV_ANALOG)
+ return i2c_probe(adapter, &addr_data, upd64031a_attach);
+ return 0;
+}
+
+static int upd64031a_detach(struct i2c_client *client)
+{
+ int err;
+
+ err = i2c_detach_client(client);
+ if (err)
+ return err;
+
+ kfree(client);
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* i2c implementation */
+static struct i2c_driver i2c_driver = {
+ .driver = {
+ .name = "upd64031a",
+ },
+ .id = I2C_DRIVERID_UPD64031A,
+ .attach_adapter = upd64031a_probe,
+ .detach_client = upd64031a_detach,
+ .command = upd64031a_command,
+};
+
+
+static int __init upd64031a_init_module(void)
+{
+ return i2c_add_driver(&i2c_driver);
+}
+
+static void __exit upd64031a_exit_module(void)
+{
+ i2c_del_driver(&i2c_driver);
+}
+
+module_init(upd64031a_init_module);
+module_exit(upd64031a_exit_module);
+
--- /dev/null
+/*
+ * upd6408x - NEC Electronics 3-Dimensional Y/C separation driver
+ *
+ * 2003 by T.Adachi (tadachi@tadachi-net.com)
+ * 2003 by Takeru KOMORIYA <komoriya@paken.org>
+ * 2006 by Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/upd64083.h>
+
+MODULE_DESCRIPTION("uPD64083 driver");
+MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil");
+MODULE_LICENSE("GPL");
+
+static int debug = 0;
+module_param(debug, bool, 0644);
+
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+static unsigned short normal_i2c[] = { 0xb8 >> 1, 0xba >> 1, I2C_CLIENT_END };
+
+
+I2C_CLIENT_INSMOD;
+
+enum {
+ R00 = 0, R01, R02, R03, R04,
+ R05, R06, R07, R08, R09,
+ R0A, R0B, R0C, R0D, R0E, R0F,
+ R10, R11, R12, R13, R14,
+ R15, R16,
+ TOT_REGS
+};
+
+struct upd64083_state {
+ u8 mode;
+ u8 ext_y_adc;
+ u8 regs[TOT_REGS];
+};
+
+/* Initial values when used in combination with the
+ NEC upd64031a ghost reduction chip. */
+static u8 upd64083_init[] = {
+ 0x1f, 0x01, 0xa0, 0x2d, 0x29, /* we use EXCSS=0 */
+ 0x36, 0xdd, 0x05, 0x56, 0x48,
+ 0x00, 0x3a, 0xa0, 0x05, 0x08,
+ 0x44, 0x60, 0x08, 0x52, 0xf8,
+ 0x53, 0x60, 0x10
+};
+
+/* ------------------------------------------------------------------------ */
+
+static void upd64083_log_status(struct i2c_client *client)
+{
+ u8 buf[7];
+
+ i2c_master_recv(client, buf, 7);
+ v4l_info(client, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x "
+ "SA04=%02x SA05=%02x SA06=%02x\n",
+ buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
+}
+
+/* ------------------------------------------------------------------------ */
+
+static void upd64083_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ u8 buf[2];
+
+ buf[0] = reg;
+ buf[1] = val;
+ v4l_dbg(1, debug, client, "writing reg addr: %02x val: %02x\n", reg, val);
+ if (i2c_master_send(client, buf, 2) != 2)
+ v4l_err(client, "I/O error write 0x%02x/0x%02x\n", reg, val);
+}
+
+/* ------------------------------------------------------------------------ */
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static u8 upd64083_read(struct i2c_client *client, u8 reg)
+{
+ u8 buf[7];
+
+ if (reg >= sizeof(buf))
+ return 0xff;
+ i2c_master_recv(client, buf, sizeof(buf));
+ return buf[reg];
+}
+#endif
+
+/* ------------------------------------------------------------------------ */
+
+static int upd64083_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+ struct upd64083_state *state = i2c_get_clientdata(client);
+ struct v4l2_routing *route = arg;
+
+ switch (cmd) {
+ case VIDIOC_INT_G_VIDEO_ROUTING:
+ route->input = (state->mode >> 6) | (state->ext_y_adc >> 3);
+ route->output = 0;
+ break;
+
+ case VIDIOC_INT_S_VIDEO_ROUTING:
+ {
+ u8 r00, r02;
+
+ if (route->input > 7 || (route->input & 6) == 6)
+ return -EINVAL;
+ state->mode = (route->input & 3) << 6;
+ state->ext_y_adc = (route->input & UPD64083_EXT_Y_ADC) << 3;
+ r00 = (state->regs[R00] & ~(3 << 6)) | state->mode;
+ r02 = (state->regs[R02] & ~(1 << 5)) | state->ext_y_adc;
+ upd64083_write(client, R00, r00);
+ upd64083_write(client, R02, r02);
+ break;
+ }
+
+ case VIDIOC_LOG_STATUS:
+ upd64083_log_status(client);
+ break;
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ case VIDIOC_INT_G_REGISTER:
+ {
+ struct v4l2_register *reg = arg;
+
+ if (reg->i2c_id != I2C_DRIVERID_UPD64083)
+ return -EINVAL;
+ reg->val = upd64083_read(client, reg->reg & 0xff);
+ break;
+ }
+
+ case VIDIOC_INT_S_REGISTER:
+ {
+ struct v4l2_register *reg = arg;
+ u8 addr = reg->reg & 0xff;
+ u8 val = reg->val & 0xff;
+
+ if (reg->i2c_id != I2C_DRIVERID_UPD64083)
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ upd64083_write(client, addr, val);
+ break;
+ }
+#endif
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------ */
+
+/* i2c implementation */
+
+static struct i2c_driver i2c_driver;
+
+static int upd64083_attach(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct upd64083_state *state;
+ int i;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return 0;
+
+ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (client == NULL) {
+ return -ENOMEM;
+ }
+
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &i2c_driver;
+ snprintf(client->name, sizeof(client->name) - 1, "uPD64083");
+
+ v4l_info(client, "chip found @ 0x%x (%s)\n", address << 1, adapter->name);
+
+ state = kmalloc(sizeof(struct upd64083_state), GFP_KERNEL);
+ if (state == NULL) {
+ kfree(client);
+ return -ENOMEM;
+ }
+ i2c_set_clientdata(client, state);
+ /* Initially assume that a ghost reduction chip is present */
+ state->mode = 0; /* YCS mode */
+ state->ext_y_adc = (1 << 5);
+ memcpy(state->regs, upd64083_init, TOT_REGS);
+ for (i = 0; i < TOT_REGS; i++) {
+ upd64083_write(client, i, state->regs[i]);
+ }
+ i2c_attach_client(client);
+
+ return 0;
+}
+
+static int upd64083_probe(struct i2c_adapter *adapter)
+{
+ if (adapter->class & I2C_CLASS_TV_ANALOG)
+ return i2c_probe(adapter, &addr_data, upd64083_attach);
+ return 0;
+}
+
+static int upd64083_detach(struct i2c_client *client)
+{
+ int err;
+
+ err = i2c_detach_client(client);
+ if (err)
+ return err;
+
+ kfree(client);
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* i2c implementation */
+static struct i2c_driver i2c_driver = {
+ .driver = {
+ .name = "upd64083",
+ },
+ .id = I2C_DRIVERID_UPD64083,
+ .attach_adapter = upd64083_probe,
+ .detach_client = upd64083_detach,
+ .command = upd64083_command,
+};
+
+
+static int __init upd64083_init_module(void)
+{
+ return i2c_add_driver(&i2c_driver);
+}
+
+static void __exit upd64083_exit_module(void)
+{
+ i2c_del_driver(&i2c_driver);
+}
+
+module_init(upd64083_init_module);
+module_exit(upd64083_exit_module);
--- /dev/null
+/*
+ * upd64031a - NEC Electronics Ghost Reduction input defines
+ *
+ * 2006 by Hans Verkuil (hverkuil@xs4all.nl)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _UPD64031A_H_
+#define _UPD64031A_H_
+
+/* Ghost reduction modes */
+#define UPD64031A_GR_ON 0
+#define UPD64031A_GR_OFF 1
+#define UPD64031A_GR_THROUGH 3
+
+/* Direct 3D/YCS Connection */
+#define UPD64031A_3DYCS_DISABLE (0 << 2)
+#define UPD64031A_3DYCS_COMPOSITE (2 << 2)
+#define UPD64031A_3DYCS_SVIDEO (3 << 2)
+
+/* Composite sync digital separation circuit */
+#define UPD64031A_COMPOSITE_EXTERNAL (1 << 4)
+
+/* Vertical sync digital separation circuit */
+#define UPD64031A_VERTICAL_EXTERNAL (1 << 5)
+
+#endif
+
--- /dev/null
+/*
+ * upd6408x - NEC Electronics 3-Dimensional Y/C separation input defines
+ *
+ * 2006 by Hans Verkuil (hverkuil@xs4all.nl)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _UPD64083_H_
+#define _UPD64083_H_
+
+/* There are two bits of information that the driver needs in order
+ to select the correct routing: the operating mode and the selection
+ of the Y input (external or internal).
+
+ The first two operating modes expect a composite signal on the Y input,
+ the second two operating modes use both the Y and C inputs.
+
+ Normally YCS_MODE is used for tuner and composite inputs, and the
+ YCNR mode is used for S-Video inputs.
+
+ The external Y-ADC is selected when the composite input comes from a
+ upd64031a ghost reduction device. If this device is not present, or
+ the input is a S-Video signal, then the internal Y-ADC input should
+ be used. */
+
+/* Operating modes: */
+
+/* YCS mode: Y/C separation (burst locked clocking) */
+#define UPD64083_YCS_MODE 0
+/* YCS+ mode: 2D Y/C separation and YCNR (burst locked clocking) */
+#define UPD64083_YCS_PLUS_MODE 1
+
+/* Note: the following two modes cannot be used in combination with the
+ external Y-ADC. */
+/* MNNR mode: frame comb type YNR+C delay (line locked clocking) */
+#define UPD64083_MNNR_MODE 2
+/* YCNR mode: frame recursive YCNR (burst locked clocking) */
+#define UPD64083_YCNR_MODE 3
+
+/* Select external Y-ADC: this should be set if this device is used in
+ combination with the upd64031a ghost reduction device.
+ Otherwise leave at 0 (use internal Y-ADC). */
+#define UPD64083_EXT_Y_ADC (1 << 2)
+
+#endif
+
projects / linux-2.6 / commitdiff