[libata] use dev_printk() throughout drivers

A few drivers were not following the standard meme of printing out
their driver name and version at module load time; this is fixed
as well.

diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index 5efb3c50aa8a19020ee333889c08f2476a588196..e2a5657d5fdb4887ae969158ac89ff95fcedb01a 100644 (file)
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -41,6 +41,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -674,10 +675,10 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *
                        if (!ahci_host_intr(ap, qc))
                                if (ata_ratelimit()) {
                                        struct pci_dev *pdev =
-                                         to_pci_dev(ap->host_set->dev);
-                                       printk(KERN_WARNING
-                                         "ahci(%s): unhandled interrupt on port %u\n",
-                                         pci_name(pdev), i);
+                                               to_pci_dev(ap->host_set->dev);
+                                       dev_printk(KERN_WARNING, &pdev->dev,
+                                         "unhandled interrupt on port %u\n",
+                                         i);
                                }
 
                        VPRINTK("port %u\n", i);
@@ -685,10 +686,9 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *
                        VPRINTK("port %u (no irq)\n", i);
                        if (ata_ratelimit()) {
                                struct pci_dev *pdev =
-                                 to_pci_dev(ap->host_set->dev);
-                               printk(KERN_WARNING
-                                 "ahci(%s): interrupt on disabled port %u\n",
-                                 pci_name(pdev), i);
+                                       to_pci_dev(ap->host_set->dev);
+                               dev_printk(KERN_WARNING, &pdev->dev,
+                                       "interrupt on disabled port %u\n", i);
                        }
                }
 
@@ -760,8 +760,8 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
 
        tmp = readl(mmio + HOST_CTL);
        if (tmp & HOST_RESET) {
-               printk(KERN_ERR DRV_NAME "(%s): controller reset failed (0x%x)\n",
-                       pci_name(pdev), tmp);
+               dev_printk(KERN_ERR, &pdev->dev,
+                          "controller reset failed (0x%x)\n", tmp);
                return -EIO;
        }
 
@@ -789,22 +789,22 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
                if (rc) {
                        rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
                        if (rc) {
-                               printk(KERN_ERR DRV_NAME "(%s): 64-bit DMA enable failed\n",
-                                       pci_name(pdev));
+                               dev_printk(KERN_ERR, &pdev->dev,
+                                          "64-bit DMA enable failed\n");
                                return rc;
                        }
                }
        } else {
                rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
                if (rc) {
-                       printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
-                               pci_name(pdev));
+                       dev_printk(KERN_ERR, &pdev->dev,
+                                  "32-bit DMA enable failed\n");
                        return rc;
                }
                rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
                if (rc) {
-                       printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
-                               pci_name(pdev));
+                       dev_printk(KERN_ERR, &pdev->dev,
+                                  "32-bit consistent DMA enable failed\n");
                        return rc;
                }
        }
@@ -907,10 +907,10 @@ static void ahci_print_info(struct ata_probe_ent *probe_ent)
        else
                scc_s = "unknown";
 
-       printk(KERN_INFO DRV_NAME "(%s) AHCI %02x%02x.%02x%02x "
+       dev_printk(KERN_INFO, &pdev->dev,
+               "AHCI %02x%02x.%02x%02x "
                "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
                ,
-               pci_name(pdev),
 
                (vers >> 24) & 0xff,
                (vers >> 16) & 0xff,
@@ -923,11 +923,11 @@ static void ahci_print_info(struct ata_probe_ent *probe_ent)
                impl,
                scc_s);
 
-       printk(KERN_INFO DRV_NAME "(%s) flags: "
+       dev_printk(KERN_INFO, &pdev->dev,
+               "flags: "
                "%s%s%s%s%s%s"
                "%s%s%s%s%s%s%s\n"
                ,
-               pci_name(pdev),
 
                cap & (1 << 31) ? "64bit " : "",
                cap & (1 << 30) ? "ncq " : "",
@@ -960,7 +960,7 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
        VPRINTK("ENTER\n");
 
        if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
        rc = pci_enable_device(pdev);
        if (rc)

diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index 74b3b2c629b668c86f555344639a93587710dd7f..665017eda8a6596754b7f69bb6d6565597e3172f 100644 (file)
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -40,6 +40,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <asm/io.h>
@@ -626,16 +627,14 @@ static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
 
        rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
        if (rc) {
-               printk(KERN_ERR DRV_NAME
-                       "(%s): 32-bit DMA enable failed\n",
-                       pci_name(pdev));
+               dev_printk(KERN_ERR, &pdev->dev,
+                       "32-bit DMA enable failed\n");
                return rc;
        }
        rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
        if (rc) {
-               printk(KERN_ERR DRV_NAME
-                       "(%s): 32-bit consistent DMA enable failed\n",
-                       pci_name(pdev));
+               dev_printk(KERN_ERR, &pdev->dev,
+                       "32-bit consistent DMA enable failed\n");
                return rc;
        }
        return 0;
@@ -651,7 +650,7 @@ static int adma_ata_init_one(struct pci_dev *pdev,
        int rc, port_no;
 
        if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
        rc = pci_enable_device(pdev);
        if (rc)

diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 936d1ce5575f1ea98fe33f01230feb61643c4f37..46dbdee79f77af8d51ecbe334323bea22c2f641c 100644 (file)
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -29,6 +29,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -1437,9 +1438,9 @@ static void mv_print_info(struct ata_probe_ent *probe_ent)
        else
                scc_s = "unknown";
 
-       printk(KERN_INFO DRV_NAME 
-              "(%s) %u slots %u ports %s mode IRQ via %s\n",
-              pci_name(pdev), (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, 
+       dev_printk(KERN_INFO, &pdev->dev,
+              "%u slots %u ports %s mode IRQ via %s\n",
+              (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, 
               scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
 }
 
@@ -1460,9 +1461,8 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
        void __iomem *mmio_base;
        int pci_dev_busy = 0, rc;
 
-       if (!printed_version++) {
-               printk(KERN_INFO DRV_NAME " version " DRV_VERSION "\n");
-       }
+       if (!printed_version++)
+               dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
 
        rc = pci_enable_device(pdev);
        if (rc) {

diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index 1a56d6c79dddfc8fac2e52d4320110977e1ce599..d573888eda761f05041ab771bc6e64891e97c5b2 100644 (file)
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -61,6 +61,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -383,7 +384,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
                        return -ENODEV;
 
        if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
        rc = pci_enable_device(pdev);
        if (rc)

diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 8f41702275db9af3ec23c3570988b4fbad5045d7..b41c977d6fab1df637b7c5c1c2a72d67c05f708f 100644 (file)
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -38,6 +38,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -633,7 +634,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
        int rc;
 
        if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
        /*
         * If this driver happens to only be useful on Apple's K2, then

diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index d95a02fa7afb562df81b17f4995c2dbcba0fad18..9938dae782b6b1b2ba6255e4ba67203a72fc650d 100644 (file)
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -35,6 +35,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <asm/io.h>
@@ -600,25 +601,22 @@ static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
                if (rc) {
                        rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
                        if (rc) {
-                               printk(KERN_ERR DRV_NAME
-                                       "(%s): 64-bit DMA enable failed\n",
-                                       pci_name(pdev));
+                               dev_printk(KERN_ERR, &pdev->dev,
+                                          "64-bit DMA enable failed\n");
                                return rc;
                        }
                }
        } else {
                rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
                if (rc) {
-                       printk(KERN_ERR DRV_NAME
-                               "(%s): 32-bit DMA enable failed\n",
-                               pci_name(pdev));
+                       dev_printk(KERN_ERR, &pdev->dev,
+                               "32-bit DMA enable failed\n");
                        return rc;
                }
                rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
                if (rc) {
-                       printk(KERN_ERR DRV_NAME
-                               "(%s): 32-bit consistent DMA enable failed\n",
-                               pci_name(pdev));
+                       dev_printk(KERN_ERR, &pdev->dev,
+                               "32-bit consistent DMA enable failed\n");
                        return rc;
                }
        }
@@ -635,7 +633,7 @@ static int qs_ata_init_one(struct pci_dev *pdev,
        int rc, port_no;
 
        if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
        rc = pci_enable_device(pdev);
        if (rc)

diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 3a056173fb95a2c9a62598906fcec57231e7db76..435f7e0085ec74c460a7a17df0be7276155506a9 100644 (file)
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -41,6 +41,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -386,7 +387,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
        u8 cls;
 
        if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
        /*
         * If this driver happens to only be useful on Apple's K2, then
@@ -463,8 +464,8 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
                        writeb(cls, mmio_base + SIL_FIFO_W3);
                }
        } else
-               printk(KERN_WARNING DRV_NAME "(%s): cache line size not set.  Driver may not function\n",
-                       pci_name(pdev));
+               dev_printk(KERN_WARNING, &pdev->dev,
+                        "cache line size not set.  Driver may not function\n");
 
        if (ent->driver_data == sil_3114) {
                irq_mask = SIL_MASK_4PORT;

diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 4afe2b15b80326ac2fed0a30ba44864b1fc86c29..c66548025657e52339ab89d9f0a1914b8ff58111 100644 (file)
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -35,6 +35,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
+#include <linux/device.h>
 #include <scsi/scsi_host.h>
 #include "scsi.h"
 #include <linux/libata.h>
@@ -690,7 +691,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
        int i, rc;
 
        if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
        rc = pci_enable_device(pdev);
        if (rc)
@@ -750,14 +751,14 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         */
        rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
        if (rc) {
-               printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
-                      pci_name(pdev));
+               dev_printk(KERN_ERR, &pdev->dev,
+                          "32-bit DMA enable failed\n");
                goto out_free;
        }
        rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
        if (rc) {
-               printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
-                      pci_name(pdev));
+               dev_printk(KERN_ERR, &pdev->dev,
+                          "32-bit consistent DMA enable failed\n");
                goto out_free;
        }
 
@@ -793,9 +794,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                                        break;
                        }
                        if (tmp & PORT_CS_PORT_RST)
-                               printk(KERN_ERR DRV_NAME
-                                      "(%s): failed to clear port RST\n",
-                                      pci_name(pdev));
+                               dev_printk(KERN_ERR, &pdev->dev,
+                                          "failed to clear port RST\n");
                }
 
                /* Zero error counters. */
@@ -824,9 +824,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
                /* Reset itself */
                if (__sil24_reset_controller(port))
-                       printk(KERN_ERR DRV_NAME
-                              "(%s): failed to reset controller\n",
-                              pci_name(pdev));
+                       dev_printk(KERN_ERR, &pdev->dev,
+                                  "failed to reset controller\n");
        }
 
        /* Turn on interrupts */

diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index 057f7b98b6c448dea78cc02a4c6688f545c5bb05..42288be0e5618b254b75f6a4ae560133fbf96a53 100644 (file)
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -38,6 +38,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -237,6 +238,7 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 
 static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
+       static int printed_version;
        struct ata_probe_ent *probe_ent = NULL;
        int rc;
        u32 genctl;
@@ -245,6 +247,9 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
        u8 pmr;
        u8 port2_start;
 
+       if (!printed_version++)
+               dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
        rc = pci_enable_device(pdev);
        if (rc)
                return rc;
@@ -288,16 +293,18 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
        pci_read_config_byte(pdev, SIS_PMR, &pmr);
        if (ent->device != 0x182) {
                if ((pmr & SIS_PMR_COMBINED) == 0) {
-                       printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in SATA mode\n");
+                       dev_printk(KERN_INFO, &pdev->dev,
+                                  "Detected SiS 180/181 chipset in SATA mode\n");
                        port2_start = 64;
                }
                else {
-                       printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in combined mode\n");
+                       dev_printk(KERN_INFO, &pdev->dev,
+                                  "Detected SiS 180/181 chipset in combined mode\n");
                        port2_start=0;
                }
        }
        else {
-               printk(KERN_INFO "sata_sis: Detected SiS 182 chipset\n");
+               dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n");
                port2_start = 0x20;
        }
 

diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 46208f52d0e1136e3562762ef3d51509871e4fb2..db615ff794d8d354d46d3048df95a5c4be58902f 100644 (file)
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -44,6 +44,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -362,7 +363,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
        int i;
 
        if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
        /*
         * If this driver happens to only be useful on Apple's K2, then

diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index d9a8baff0d4dfc5b9d7ed501421beb6d54212d62..0ec21e09f5d84d04a20a0b32e0f58fbf205f8457 100644 (file)
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -38,6 +38,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -1385,7 +1386,7 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *
        int rc;
 
        if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
        /*
         * If this driver happens to only be useful on Apple's K2, then

diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index d68dc7d3422c4c54384789b24f605db45962e3e9..a5e245c098e1a142b521975eb5d2a09364334dd7 100644 (file)
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -32,6 +32,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -178,12 +179,16 @@ static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 
 static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
+       static int printed_version;
        struct ata_probe_ent *probe_ent;
        struct ata_port_info *ppi;
        int rc;
        unsigned int board_idx = (unsigned int) ent->driver_data;
        int pci_dev_busy = 0;
 
+       if (!printed_version++)
+               dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
        rc = pci_enable_device(pdev);
        if (rc)
                return rc;

diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 80e291a909a972be9dc34366df1ab407689a22fc..b3ecdbe400e9cb897b32343f315b61da44c69063 100644 (file)
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -41,6 +41,7 @@
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -259,15 +260,15 @@ static void svia_configure(struct pci_dev *pdev)
        u8 tmp8;
 
        pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
-       printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n",
-              pci_name(pdev),
+       dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n",
               (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
 
        /* make sure SATA channels are enabled */
        pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
        if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
-               printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n",
-                      pci_name(pdev), (int) tmp8);
+               dev_printk(KERN_DEBUG, &pdev->dev,
+                          "enabling SATA channels (0x%x)\n",
+                          (int) tmp8);
                tmp8 |= ALL_PORTS;
                pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
        }
@@ -275,8 +276,9 @@ static void svia_configure(struct pci_dev *pdev)
        /* make sure interrupts for each channel sent to us */
        pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
        if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
-               printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n",
-                      pci_name(pdev), (int) tmp8);
+               dev_printk(KERN_DEBUG, &pdev->dev,
+                          "enabling SATA channel interrupts (0x%x)\n",
+                          (int) tmp8);
                tmp8 |= ALL_PORTS;
                pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
        }
@@ -284,8 +286,9 @@ static void svia_configure(struct pci_dev *pdev)
        /* make sure native mode is enabled */
        pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
        if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
-               printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n",
-                      pci_name(pdev), (int) tmp8);
+               dev_printk(KERN_DEBUG, &pdev->dev,
+                          "enabling SATA channel native mode (0x%x)\n",
+                          (int) tmp8);
                tmp8 |= NATIVE_MODE_ALL;
                pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
        }
@@ -303,7 +306,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
        u8 tmp8;
 
        if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
        rc = pci_enable_device(pdev);
        if (rc)
@@ -318,8 +321,9 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
        if (board_id == vt6420) {
                pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
                if (tmp8 & SATA_2DEV) {
-                       printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n",
-                       pci_name(pdev), (int) tmp8);
+                       dev_printk(KERN_ERR, &pdev->dev,
+                                  "SATA master/slave not supported (0x%x)\n",
+                                  (int) tmp8);
                        rc = -EIO;
                        goto err_out_regions;
                }
@@ -332,10 +336,11 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
        for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
                if ((pci_resource_start(pdev, i) == 0) ||
                    (pci_resource_len(pdev, i) < bar_sizes[i])) {
-                       printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
-                              pci_name(pdev), i,
-                              pci_resource_start(pdev, i),
-                              pci_resource_len(pdev, i));
+                       dev_printk(KERN_ERR, &pdev->dev,
+                                  "invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
+                                  i,
+                                  pci_resource_start(pdev, i),
+                                  pci_resource_len(pdev, i));
                        rc = -ENODEV;
                        goto err_out_regions;
                }
@@ -353,8 +358,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
                probe_ent = vt6421_init_probe_ent(pdev);
 
        if (!probe_ent) {
-               printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
-                      pci_name(pdev));
+               dev_printk(KERN_ERR, &pdev->dev, "out of memory\n");
                rc = -ENOMEM;
                goto err_out_regions;
        }

diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 54273e0063c77524518e7225935485e0fc483516..bb84ba0c7e83055d1d680eac381e0eaad31fa9ca 100644 (file)
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -42,6 +42,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -295,7 +296,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
        int rc;
 
        if (!printed_version++)
-               printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
        rc = pci_enable_device(pdev);
        if (rc)