sb1000.c: stop inlining largish static functions

drivers/net/sb1000.c has lots of inlined static functions.

Mst of them are used at initialization, wait for some
hardware register to change (wait using yield, sleep etc),
or do slow port-based I/O. Inlining thse "for speed" makes no sense.

This patch removes "inline" from biggest static function
(regardless of number of callsites - gcc nowadays auto-inlines
statics with one callsite).

Size difference for 32bit x86:

text   data    bss    dec    hex filename
6299    129      0   6428   191c linux-2.6-ALLYES/drivers/net/sb1000.o
5418    129      0   5547   15ab linux-2.6.inline-ALLYES/drivers/net/sb1000.o

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c
index 487f9d2ac5b4750fbabc83008967dd1d0dc150fb..829d0ea2709d3cbbec18565e631b9d6ff9a098a9 100644 (file)
--- a/drivers/net/sb1000.c
+++ b/drivers/net/sb1000.c
@@ -88,31 +88,31 @@ static int sb1000_close(struct net_device *dev);
 
 
 /* SB1000 hardware routines to be used during open/configuration phases */
-static inline int card_wait_for_busy_clear(const int ioaddr[],
+static int card_wait_for_busy_clear(const int ioaddr[],
        const char* name);
-static inline int card_wait_for_ready(const int ioaddr[], const char* name,
+static int card_wait_for_ready(const int ioaddr[], const char* name,
        unsigned char in[]);
 static int card_send_command(const int ioaddr[], const char* name,
        const unsigned char out[], unsigned char in[]);
 
 /* SB1000 hardware routines to be used during frame rx interrupt */
-static inline int sb1000_wait_for_ready(const int ioaddr[], const char* name);
-static inline int sb1000_wait_for_ready_clear(const int ioaddr[],
+static int sb1000_wait_for_ready(const int ioaddr[], const char* name);
+static int sb1000_wait_for_ready_clear(const int ioaddr[],
        const char* name);
-static inline void sb1000_send_command(const int ioaddr[], const char* name,
+static void sb1000_send_command(const int ioaddr[], const char* name,
        const unsigned char out[]);
-static inline void sb1000_read_status(const int ioaddr[], unsigned char in[]);
-static inline void sb1000_issue_read_command(const int ioaddr[],
+static void sb1000_read_status(const int ioaddr[], unsigned char in[]);
+static void sb1000_issue_read_command(const int ioaddr[],
        const char* name);
 
 /* SB1000 commands for open/configuration */
-static inline int sb1000_reset(const int ioaddr[], const char* name);
-static inline int sb1000_check_CRC(const int ioaddr[], const char* name);
+static int sb1000_reset(const int ioaddr[], const char* name);
+static int sb1000_check_CRC(const int ioaddr[], const char* name);
 static inline int sb1000_start_get_set_command(const int ioaddr[],
        const char* name);
-static inline int sb1000_end_get_set_command(const int ioaddr[],
+static int sb1000_end_get_set_command(const int ioaddr[],
        const char* name);
-static inline int sb1000_activate(const int ioaddr[], const char* name);
+static int sb1000_activate(const int ioaddr[], const char* name);
 static int sb1000_get_firmware_version(const int ioaddr[],
        const char* name, unsigned char version[], int do_end);
 static int sb1000_get_frequency(const int ioaddr[], const char* name,
@@ -125,8 +125,8 @@ static int sb1000_set_PIDs(const int ioaddr[], const char* name,
        const short PID[]);
 
 /* SB1000 commands for frame rx interrupt */
-static inline int sb1000_rx(struct net_device *dev);
-static inline void sb1000_error_dpc(struct net_device *dev);
+static int sb1000_rx(struct net_device *dev);
+static void sb1000_error_dpc(struct net_device *dev);
 
 static const struct pnp_device_id sb1000_pnp_ids[] = {
        { "GIC1000", 0 },
@@ -250,7 +250,7 @@ static struct pnp_driver sb1000_driver = {
 static const int TimeOutJiffies = (875 * HZ) / 100;
 
 /* Card Wait For Busy Clear (cannot be used during an interrupt) */
-static inline int
+static int
 card_wait_for_busy_clear(const int ioaddr[], const char* name)
 {
        unsigned char a;
@@ -274,7 +274,7 @@ card_wait_for_busy_clear(const int ioaddr[], const char* name)
 }
 
 /* Card Wait For Ready (cannot be used during an interrupt) */
-static inline int
+static int
 card_wait_for_ready(const int ioaddr[], const char* name, unsigned char in[])
 {
        unsigned char a;
@@ -354,7 +354,7 @@ card_send_command(const int ioaddr[], const char* name,
 static const int Sb1000TimeOutJiffies = 7 * HZ;
 
 /* Card Wait For Ready (to be used during frame rx) */
-static inline int
+static int
 sb1000_wait_for_ready(const int ioaddr[], const char* name)
 {
        unsigned long timeout;
@@ -380,7 +380,7 @@ sb1000_wait_for_ready(const int ioaddr[], const char* name)
 }
 
 /* Card Wait For Ready Clear (to be used during frame rx) */
-static inline int
+static int
 sb1000_wait_for_ready_clear(const int ioaddr[], const char* name)
 {
        unsigned long timeout;
@@ -405,7 +405,7 @@ sb1000_wait_for_ready_clear(const int ioaddr[], const char* name)
 }
 
 /* Card Send Command (to be used during frame rx) */
-static inline void
+static void
 sb1000_send_command(const int ioaddr[], const char* name,
        const unsigned char out[])
 {
@@ -422,7 +422,7 @@ sb1000_send_command(const int ioaddr[], const char* name,
 }
 
 /* Card Read Status (to be used during frame rx) */
-static inline void
+static void
 sb1000_read_status(const int ioaddr[], unsigned char in[])
 {
        in[1] = inb(ioaddr[0] + 1);
@@ -434,7 +434,7 @@ sb1000_read_status(const int ioaddr[], unsigned char in[])
 }
 
 /* Issue Read Command (to be used during frame rx) */
-static inline void
+static void
 sb1000_issue_read_command(const int ioaddr[], const char* name)
 {
        const unsigned char Command0[6] = {0x20, 0x00, 0x00, 0x01, 0x00, 0x00};
@@ -450,7 +450,7 @@ sb1000_issue_read_command(const int ioaddr[], const char* name)
  * SB1000 commands for open/configuration
  */
 /* reset SB1000 card */
-static inline int
+static int
 sb1000_reset(const int ioaddr[], const char* name)
 {
        unsigned char st[7];
@@ -479,7 +479,7 @@ sb1000_reset(const int ioaddr[], const char* name)
 }
 
 /* check SB1000 firmware CRC */
-static inline int
+static int
 sb1000_check_CRC(const int ioaddr[], const char* name)
 {
        unsigned char st[7];
@@ -504,7 +504,7 @@ sb1000_start_get_set_command(const int ioaddr[], const char* name)
        return card_send_command(ioaddr, name, Command0, st);
 }
 
-static inline int
+static int
 sb1000_end_get_set_command(const int ioaddr[], const char* name)
 {
        unsigned char st[7];
@@ -517,7 +517,7 @@ sb1000_end_get_set_command(const int ioaddr[], const char* name)
        return card_send_command(ioaddr, name, Command1, st);
 }
 
-static inline int
+static int
 sb1000_activate(const int ioaddr[], const char* name)
 {
        unsigned char st[7];
@@ -694,7 +694,7 @@ sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[])
 }
 
 
-static inline void
+static void
 sb1000_print_status_buffer(const char* name, unsigned char st[],
        unsigned char buffer[], int size)
 {
@@ -725,7 +725,7 @@ sb1000_print_status_buffer(const char* name, unsigned char st[],
 /* receive a single frame and assemble datagram
  * (this is the heart of the interrupt routine)
  */
-static inline int
+static int
 sb1000_rx(struct net_device *dev)
 {
 
@@ -888,7 +888,7 @@ dropped_frame:
        return -1;
 }
 
-static inline void
+static void
 sb1000_error_dpc(struct net_device *dev)
 {
        char *name;