]> err.no Git - linux-2.6/commitdiff
[PATCH] x86_64 irq: Refactor setup_IO_APIC_irq
authorEric W. Biederman <ebiederm@xmission.com>
Fri, 23 Feb 2007 11:19:08 +0000 (04:19 -0700)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Mon, 26 Feb 2007 18:34:07 +0000 (10:34 -0800)
Currently we have two routines that do practically the same thing
setup_IO_APIC_irq and io_apic_set_pci_routing.  This patch makes
setup_IO_APIC_irq the common factor of these two previous routines.
For setup_IO_APIC_irq all that was needed was to pass the trigger
and polarity to make the code a proper subset of io_apic_set_pci_routing.

Hopefully consolidating these two routines will improve maintenance
there were several differences that simply appear to be one routine
or the other getting it wrong.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/x86_64/kernel/io_apic.c

index a69c38b626290cb44b198aede0e6ac5c84b34364..e0648380fddeb46b24aacdd9a93173a44633d9b5 100644 (file)
@@ -615,22 +615,6 @@ static int pin_2_irq(int idx, int apic, int pin)
        return irq;
 }
 
-static inline int IO_APIC_irq_trigger(int irq)
-{
-       int apic, idx, pin;
-
-       for (apic = 0; apic < nr_ioapics; apic++) {
-               for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-                       idx = find_irq_entry(apic,pin,mp_INT);
-                       if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin)))
-                               return irq_trigger(idx);
-               }
-       }
-       /*
-        * nonexistent IRQs are edge default
-        */
-       return 0;
-}
 
 /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
 static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = {
@@ -795,26 +779,36 @@ void __setup_vector_irq(int cpu)
 
 static struct irq_chip ioapic_chip;
 
-#define IOAPIC_AUTO    -1
-#define IOAPIC_EDGE    0
-#define IOAPIC_LEVEL   1
-
 static void ioapic_register_intr(int irq, unsigned long trigger)
 {
-       if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
-                       trigger == IOAPIC_LEVEL)
+       if (trigger)
                set_irq_chip_and_handler_name(irq, &ioapic_chip,
                                              handle_fasteoi_irq, "fasteoi");
        else
                set_irq_chip_and_handler_name(irq, &ioapic_chip,
                                              handle_edge_irq, "edge");
 }
-static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq)
+
+static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
+                             int trigger, int polarity)
 {
        struct IO_APIC_route_entry entry;
+       cpumask_t mask;
        int vector;
        unsigned long flags;
 
+       if (!IO_APIC_IRQ(irq))
+               return;
+
+       vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
+       if (vector < 0)
+               return;
+
+       apic_printk(APIC_VERBOSE,KERN_DEBUG
+                   "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
+                   "IRQ %d Mode:%i Active:%i)\n",
+                   apic, mp_ioapics[apic].mpc_apicid, pin, vector,
+                   irq, trigger, polarity);
 
        /*
         * add it to the IO-APIC irq-routing table:
@@ -823,41 +817,27 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq)
 
        entry.delivery_mode = INT_DELIVERY_MODE;
        entry.dest_mode = INT_DEST_MODE;
+       entry.dest = cpu_mask_to_apicid(mask);
        entry.mask = 0;                         /* enable IRQ */
-       entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
-
-       entry.trigger = irq_trigger(idx);
-       entry.polarity = irq_polarity(idx);
+       entry.trigger = trigger;
+       entry.polarity = polarity;
+       entry.vector = vector;
 
-       if (irq_trigger(idx)) {
-               entry.trigger = 1;
+       /* Mask level triggered irqs.
+        * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
+        */
+       if (trigger)
                entry.mask = 1;
-               entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
-       }
-
-       if (!apic && !IO_APIC_IRQ(irq))
-               return;
 
-       if (IO_APIC_IRQ(irq)) {
-               cpumask_t mask;
-               vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
-               if (vector < 0)
-                       return;
-
-               entry.dest = cpu_mask_to_apicid(mask);
-               entry.vector = vector;
-
-               ioapic_register_intr(irq, IOAPIC_AUTO);
-               if (!apic && (irq < 16))
-                       disable_8259A_irq(irq);
-       }
+       ioapic_register_intr(irq, trigger);
+       if (irq < 16)
+               disable_8259A_irq(irq);
 
        ioapic_write_entry(apic, pin, entry);
 
        spin_lock_irqsave(&ioapic_lock, flags);
        irq_desc[irq].affinity = TARGET_CPUS;
        spin_unlock_irqrestore(&ioapic_lock, flags);
-
 }
 
 static void __init setup_IO_APIC_irqs(void)
@@ -882,8 +862,8 @@ static void __init setup_IO_APIC_irqs(void)
                irq = pin_2_irq(idx, apic, pin);
                add_pin_to_irq(irq, apic, pin);
 
-               setup_IO_APIC_irq(apic, pin, idx, irq);
-
+               setup_IO_APIC_irq(apic, pin, irq,
+                                 irq_trigger(idx), irq_polarity(idx));
        }
        }
 
@@ -2090,11 +2070,6 @@ int __init io_apic_get_redir_entries (int ioapic)
 
 int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
 {
-       struct IO_APIC_route_entry entry;
-       unsigned long flags;
-       int vector;
-       cpumask_t mask;
-
        if (!IO_APIC_IRQ(irq)) {
                apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
                        ioapic);
@@ -2107,42 +2082,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p
        if (irq >= 16)
                add_pin_to_irq(irq, ioapic, pin);
 
-
-       vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
-       if (vector < 0)
-               return vector;
-
-       /*
-        * Generate a PCI IRQ routing entry and program the IOAPIC accordingly.
-        * Note that we mask (disable) IRQs now -- these get enabled when the
-        * corresponding device driver registers for this IRQ.
-        */
-
-       memset(&entry,0,sizeof(entry));
-
-       entry.delivery_mode = INT_DELIVERY_MODE;
-       entry.dest_mode = INT_DEST_MODE;
-       entry.dest = cpu_mask_to_apicid(mask);
-       entry.trigger = triggering;
-       entry.polarity = polarity;
-       entry.mask = 1;                                  /* Disabled (masked) */
-       entry.vector = vector & 0xff;
-
-       apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
-               "IRQ %d Mode:%i Active:%i)\n", ioapic, 
-              mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
-              triggering, polarity);
-
-       ioapic_register_intr(irq, triggering);
-
-       if (!ioapic && (irq < 16))
-               disable_8259A_irq(irq);
-
-       ioapic_write_entry(ioapic, pin, entry);
-
-       spin_lock_irqsave(&ioapic_lock, flags);
-       irq_desc[irq].affinity = TARGET_CPUS;
-       spin_unlock_irqrestore(&ioapic_lock, flags);
+       setup_IO_APIC_irq(ioapic, pin, irq, triggering, polarity);
 
        return 0;
 }
@@ -2175,7 +2115,9 @@ void __init setup_ioapic_dest(void)
                         * cpu is online.
                         */
                        if(!irq_vector[irq])
-                               setup_IO_APIC_irq(ioapic, pin, irq_entry, irq);
+                               setup_IO_APIC_irq(ioapic, pin, irq,
+                                                 irq_trigger(irq_entry),
+                                                 irq_polarity(irq_entry));
                        else
                                set_ioapic_affinity_irq(irq, TARGET_CPUS);
                }