/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x10 */
cx25840_write(client, 0x127, 0x50);
- switch (state->audio_input) {
- case AUDIO_TUNER:
+ if (state->aud_input != CX25840_AUDIO_SERIAL) {
switch (freq) {
case 32000:
/* VID_PLL and AUX_PLL */
cx25840_write4(client, 0x90c, 0xaa4f0108);
break;
}
- break;
-
- case AUDIO_EXTERN_1:
- case AUDIO_EXTERN_2:
- case AUDIO_INTERN:
- case AUDIO_RADIO:
+ } else {
switch (freq) {
case 32000:
/* VID_PLL and AUX_PLL */
cx25840_write4(client, 0x90c, 0x55550108);
break;
}
- break;
}
/* deassert soft reset */
return 0;
}
-static int set_input(struct i2c_client *client, int audio_input)
+void cx25840_audio_set_path(struct i2c_client *client)
{
struct cx25840_state *state = i2c_get_clientdata(client);
- cx25840_dbg("set audio input (%d)\n", audio_input);
-
/* stop microcontroller */
cx25840_and_or(client, 0x803, ~0x10, 0);
/* Mute everything to prevent the PFFT! */
cx25840_write(client, 0x8d3, 0x1f);
- switch (audio_input) {
- case AUDIO_TUNER:
- /* Set Path1 to Analog Demod Main Channel */
- cx25840_write4(client, 0x8d0, 0x7038061f);
-
- /* When the microcontroller detects the
- * audio format, it will unmute the lines */
- cx25840_and_or(client, 0x803, ~0x10, 0x10);
- break;
-
- case AUDIO_EXTERN_1:
- case AUDIO_EXTERN_2:
- case AUDIO_INTERN:
- case AUDIO_RADIO:
+ if (state->aud_input == CX25840_AUDIO_SERIAL) {
/* Set Path1 to Serial Audio Input */
cx25840_write4(client, 0x8d0, 0x12100101);
/* The microcontroller should not be started for the
* non-tuner inputs: autodetection is specific for
* TV audio. */
- break;
+ } else {
+ /* Set Path1 to Analog Demod Main Channel */
+ cx25840_write4(client, 0x8d0, 0x7038061f);
- default:
- cx25840_dbg("Invalid audio input selection %d\n", audio_input);
- return -EINVAL;
+ /* When the microcontroller detects the
+ * audio format, it will unmute the lines */
+ cx25840_and_or(client, 0x803, ~0x10, 0x10);
}
- state->audio_input = audio_input;
-
- return set_audclk_freq(client, state->audclk_freq);
+ set_audclk_freq(client, state->audclk_freq);
}
inline static int get_volume(struct i2c_client *client)
{
struct cx25840_state *state = i2c_get_clientdata(client);
- if (state->audio_input == AUDIO_TUNER) {
+ if (state->aud_input != CX25840_AUDIO_SERIAL) {
/* Must turn off microcontroller in order to mute sound.
* Not sure if this is the best method, but it does work.
* If the microcontroller is running, then it will undo any
struct v4l2_control *ctrl = arg;
switch (cmd) {
- case AUDC_SET_INPUT:
- return set_input(client, *(int *)arg);
case VIDIOC_INT_AUDIO_CLOCK_FREQ:
return set_audclk_freq(client, *(u32 *)arg);
+
case VIDIOC_G_CTRL:
switch (ctrl->id) {
case V4L2_CID_AUDIO_VOLUME:
return -EINVAL;
}
break;
+
case VIDIOC_S_CTRL:
switch (ctrl->id) {
case V4L2_CID_AUDIO_VOLUME:
return -EINVAL;
}
break;
+
default:
return -EINVAL;
}
/* ----------------------------------------------------------------------- */
-static int set_input(struct i2c_client *, enum cx25840_input);
-static void input_change(struct i2c_client *);
+static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input,
+ enum cx25840_audio_input aud_input);
static void log_status(struct i2c_client *client);
/* ----------------------------------------------------------------------- */
/* AC97 shift */
cx25840_write(client, 0x8cf, 0x0f);
- /* (re)set video input */
- set_input(client, state->input);
- /* (re)set audio input */
- cx25840_audio(client, AUDC_SET_INPUT, &state->audio_input);
+ /* (re)set input */
+ set_input(client, state->vid_input, state->aud_input);
/* start microcontroller */
cx25840_and_or(client, 0x803, ~0x10, 0x10);
cx25840_write(client, 0x80b, 0x10);
} else if (std & V4L2_STD_NTSC) {
/* NTSC */
- if (state->cardtype == CARDTYPE_PVR150_WORKAROUND) {
+ if (state->pvr150_workaround) {
/* Certain Hauppauge PVR150 models have a hardware bug
that causes audio to drop out. For these models the
audio standard must be set explicitly.
}
}
-static int set_input(struct i2c_client *client, enum cx25840_input input)
+static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input,
+ enum cx25840_audio_input aud_input)
{
struct cx25840_state *state = i2c_get_clientdata(client);
+ u8 is_composite = (vid_input >= CX25840_COMPOSITE1 &&
+ vid_input <= CX25840_COMPOSITE8);
+ u8 reg;
- cx25840_dbg("decoder set input (%d)\n", input);
+ cx25840_dbg("decoder set video input %d, audio input %d\n",
+ vid_input, aud_input);
- switch (input) {
- case CX25840_TUNER:
- cx25840_dbg("now setting Tuner input\n");
-
- if (state->cardtype == CARDTYPE_PVR150 ||
- state->cardtype == CARDTYPE_PVR150_WORKAROUND) {
- /* CH_SEL_ADC2=1 */
- cx25840_and_or(client, 0x102, ~0x2, 0x02);
- }
-
- /* Video Input Control */
- if (state->cardtype == CARDTYPE_PG600) {
- cx25840_write(client, 0x103, 0x11);
- } else {
- cx25840_write(client, 0x103, 0x46);
- }
-
- /* INPUT_MODE=0 */
- cx25840_and_or(client, 0x401, ~0x6, 0x00);
- break;
-
- case CX25840_COMPOSITE0:
- case CX25840_COMPOSITE1:
- cx25840_dbg("now setting Composite input\n");
+ if (is_composite) {
+ reg = 0xf0 + (vid_input - CX25840_COMPOSITE1);
+ } else {
+ int luma = vid_input & 0xf0;
+ int chroma = vid_input & 0xf00;
- /* Video Input Control */
- if (state->cardtype == CARDTYPE_PG600) {
- cx25840_write(client, 0x103, 0x00);
- } else {
- cx25840_write(client, 0x103, 0x02);
+ if ((vid_input & ~0xff0) ||
+ luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA4 ||
+ chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) {
+ cx25840_err("0x%04x is not a valid video input!\n", vid_input);
+ return -EINVAL;
}
-
- /* INPUT_MODE=0 */
- cx25840_and_or(client, 0x401, ~0x6, 0x00);
- break;
-
- case CX25840_SVIDEO0:
- case CX25840_SVIDEO1:
- cx25840_dbg("now setting S-Video input\n");
-
- /* CH_SEL_ADC2=0 */
- cx25840_and_or(client, 0x102, ~0x2, 0x00);
-
- /* Video Input Control */
- if (state->cardtype == CARDTYPE_PG600) {
- cx25840_write(client, 0x103, 0x02);
+ reg = 0xf0 + ((luma - CX25840_SVIDEO_LUMA1) >> 4);
+ if (chroma >= CX25840_SVIDEO_CHROMA7) {
+ reg &= 0x3f;
+ reg |= (chroma - CX25840_SVIDEO_CHROMA7) >> 2;
} else {
- cx25840_write(client, 0x103, 0x10);
+ reg &= 0xcf;
+ reg |= (chroma - CX25840_SVIDEO_CHROMA4) >> 4;
}
+ }
- /* INPUT_MODE=1 */
- cx25840_and_or(client, 0x401, ~0x6, 0x02);
+ switch (aud_input) {
+ case CX25840_AUDIO_SERIAL:
+ /* do nothing, use serial audio input */
break;
+ case CX25840_AUDIO4: reg &= ~0x30; break;
+ case CX25840_AUDIO5: reg &= ~0x30; reg |= 0x10; break;
+ case CX25840_AUDIO6: reg &= ~0x30; reg |= 0x20; break;
+ case CX25840_AUDIO7: reg &= ~0xc0; break;
+ case CX25840_AUDIO8: reg &= ~0xc0; reg |= 0x40; break;
default:
- cx25840_err("%d is not a valid input!\n", input);
+ cx25840_err("0x%04x is not a valid audio input!\n", aud_input);
return -EINVAL;
}
- state->input = input;
+ cx25840_write(client, 0x103, reg);
+ /* Set INPUT_MODE to Composite (0) or S-Video (1) */
+ cx25840_and_or(client, 0x401, ~0x6, is_composite ? 0 : 0x02);
+ /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
+ cx25840_and_or(client, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0);
+ /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */
+ if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30)
+ cx25840_and_or(client, 0x102, ~0x4, 4);
+ else
+ cx25840_and_or(client, 0x102, ~0x4, 0);
+
+ state->vid_input = vid_input;
+ state->aud_input = aud_input;
+ cx25840_audio_set_path(client);
input_change(client);
return 0;
}
struct cx25840_state *state = i2c_get_clientdata(client);
switch (ctrl->id) {
- case CX25840_CID_CARDTYPE:
- switch (ctrl->value) {
- case CARDTYPE_PVR150:
- case CARDTYPE_PVR150_WORKAROUND:
- case CARDTYPE_PG600:
- state->cardtype = ctrl->value;
- break;
- default:
- return -ERANGE;
- }
-
- set_input(client, state->input);
+ case CX25840_CID_ENABLE_PVR150_WORKAROUND:
+ state->pvr150_workaround = ctrl->value;
+ set_input(client, state->vid_input, state->aud_input);
break;
case V4L2_CID_BRIGHTNESS:
struct cx25840_state *state = i2c_get_clientdata(client);
switch (ctrl->id) {
- case CX25840_CID_CARDTYPE:
- ctrl->value = state->cardtype;
+ case CX25840_CID_ENABLE_PVR150_WORKAROUND:
+ ctrl->value = state->pvr150_workaround;
break;
case V4L2_CID_BRIGHTNESS:
ctrl->value = cx25840_read(client, 0x414) + 128;
return cx25840_vbi(client, cmd, arg);
case VIDIOC_INT_AUDIO_CLOCK_FREQ:
- case AUDC_SET_INPUT:
result = cx25840_audio(client, cmd, arg);
break;
break;
case VIDIOC_G_INPUT:
- *(int *)arg = state->input;
+ *(int *)arg = state->vid_input;
break;
case VIDIOC_S_INPUT:
- result = set_input(client, *(int *)arg);
+ result = set_input(client, *(enum cx25840_video_input *)arg, state->aud_input);
break;
+ case VIDIOC_S_AUDIO:
+ {
+ struct v4l2_audio *input = arg;
+
+ result = set_input(client, state->vid_input, input->index);
+ break;
+ }
+
+ case VIDIOC_G_AUDIO:
+ {
+ struct v4l2_audio *input = arg;
+
+ memset(input, 0, sizeof(*input));
+ input->index = state->aud_input;
+ break;
+ }
+
case VIDIOC_S_FREQUENCY:
input_change(client);
break;
i2c_set_clientdata(client, state);
memset(state, 0, sizeof(struct cx25840_state));
- state->input = CX25840_TUNER;
+ state->vid_input = CX25840_COMPOSITE7;
+ state->aud_input = CX25840_AUDIO8;
state->audclk_freq = 48000;
- state->audio_input = AUDIO_TUNER;
- state->cardtype = CARDTYPE_PVR150;
+ state->pvr150_workaround = 0;
cx25840_initialize(client, 1);
u8 pref_mode = cx25840_read(client, 0x809);
u8 afc0 = cx25840_read(client, 0x80b);
u8 mute_ctl = cx25840_read(client, 0x8d3);
+ int vid_input = state->vid_input;
+ int aud_input = state->aud_input;
char *p;
cx25840_info("Video signal: %spresent\n",
cx25840_info("Specified standard: %s\n",
vidfmt_sel ? fmt_strs[vidfmt_sel] : "automatic detection");
- switch (state->input) {
- case CX25840_COMPOSITE0: p = "Composite 0"; break;
- case CX25840_COMPOSITE1: p = "Composite 1"; break;
- case CX25840_SVIDEO0: p = "S-Video 0"; break;
- case CX25840_SVIDEO1: p = "S-Video 1"; break;
- case CX25840_TUNER: p = "Tuner"; break;
+ if (vid_input >= CX25840_COMPOSITE1 &&
+ vid_input <= CX25840_COMPOSITE8) {
+ cx25840_info("Specified video input: Composite %d\n",
+ vid_input - CX25840_COMPOSITE1 + 1);
+ } else {
+ cx25840_info("Specified video input: S-Video (Luma In%d, Chroma In%d)\n",
+ (vid_input & 0xf0) >> 4, (vid_input & 0xf00) >> 8);
+ }
+ if (aud_input) {
+ cx25840_info("Specified audio input: Tuner (In%d)\n", aud_input);
+ } else {
+ cx25840_info("Specified audio input: External\n");
}
- cx25840_info("Specified input: %s\n", p);
- cx25840_info("Specified audio input: %s\n",
- state->audio_input == 0 ? "Tuner" : "External");
cx25840_info("Specified audioclock freq: %d Hz\n", state->audclk_freq);
printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
-#define CX25840_CID_CARDTYPE (V4L2_CID_PRIVATE_BASE+0)
-
-/* The CARDTYPE_PVR150_WORKAROUND cardtype activates a workaround for a
- hardware bug that is present in PVR150 (and possible PVR500) cards that
- have certain NTSC tuners (tveeprom model numbers 85, 99 and 112). The
+/* ENABLE_PVR150_WORKAROUND activates a workaround for a hardware bug that is
+ present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
+ certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
audio autodetect fails on some channels for these models and the workaround
is to select the audio standard explicitly. Many thanks to Hauppauge for
providing this information. */
-enum cx25840_cardtype {
- CARDTYPE_PVR150,
- CARDTYPE_PG600,
- CARDTYPE_PVR150_WORKAROUND,
+#define CX25840_CID_ENABLE_PVR150_WORKAROUND (V4L2_CID_PRIVATE_BASE+0)
+
+enum cx25840_video_input {
+ /* Composite video inputs In1-In8 */
+ CX25840_COMPOSITE1 = 1,
+ CX25840_COMPOSITE2,
+ CX25840_COMPOSITE3,
+ CX25840_COMPOSITE4,
+ CX25840_COMPOSITE5,
+ CX25840_COMPOSITE6,
+ CX25840_COMPOSITE7,
+ CX25840_COMPOSITE8,
+
+ /* S-Video inputs consist of one luma input (In1-In4) ORed with one
+ chroma input (In5-In8) */
+ CX25840_SVIDEO_LUMA1 = 0x10,
+ CX25840_SVIDEO_LUMA2 = 0x20,
+ CX25840_SVIDEO_LUMA3 = 0x30,
+ CX25840_SVIDEO_LUMA4 = 0x40,
+ CX25840_SVIDEO_CHROMA4 = 0x400,
+ CX25840_SVIDEO_CHROMA5 = 0x500,
+ CX25840_SVIDEO_CHROMA6 = 0x600,
+ CX25840_SVIDEO_CHROMA7 = 0x700,
+ CX25840_SVIDEO_CHROMA8 = 0x800,
+
+ /* S-Video aliases for common luma/chroma combinations */
+ CX25840_SVIDEO1 = 0x510,
+ CX25840_SVIDEO2 = 0x620,
+ CX25840_SVIDEO3 = 0x730,
+ CX25840_SVIDEO4 = 0x840,
};
-enum cx25840_input {
- CX25840_TUNER,
- CX25840_COMPOSITE0,
- CX25840_COMPOSITE1,
- CX25840_SVIDEO0,
- CX25840_SVIDEO1
+enum cx25840_audio_input {
+ /* Audio inputs: serial or In4-In8 */
+ CX25840_AUDIO_SERIAL,
+ CX25840_AUDIO4 = 4,
+ CX25840_AUDIO5,
+ CX25840_AUDIO6,
+ CX25840_AUDIO7,
+ CX25840_AUDIO8,
};
struct cx25840_state {
- enum cx25840_cardtype cardtype;
- enum cx25840_input input;
- int audio_input;
+ int pvr150_workaround;
+ enum cx25840_video_input vid_input;
+ enum cx25840_audio_input aud_input;
u32 audclk_freq;
};
/* ----------------------------------------------------------------------- */
/* cx25850-audio.c */
int cx25840_audio(struct i2c_client *client, unsigned int cmd, void *arg);
+void cx25840_audio_set_path(struct i2c_client *client);
/* ----------------------------------------------------------------------- */
/* cx25850-vbi.c */
projects / linux-2.6 / commitdiff