]> err.no Git - linux-2.6/commitdiff
libata-sff: improve HSM violation reporting
authorTejun Heo <tj@kernel.org>
Fri, 27 Jun 2008 16:39:43 +0000 (01:39 +0900)
committerJeff Garzik <jgarzik@redhat.com>
Fri, 4 Jul 2008 13:06:02 +0000 (09:06 -0400)
Improve SFF HSM violation reporting such that each HSM violation can
be distinguished using ehi_desc.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
drivers/ata/libata-sff.c

index 215d18672a5a9c62a00c43d5b3678b3bc5638242..c0908c225483bcd352508a1b9fc239a48b50f36c 100644 (file)
@@ -1094,6 +1094,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
 int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
                     u8 status, int in_wq)
 {
+       struct ata_eh_info *ehi = &ap->link.eh_info;
        unsigned long flags = 0;
        int poll_next;
 
@@ -1125,9 +1126,12 @@ fsm_start:
                        if (likely(status & (ATA_ERR | ATA_DF)))
                                /* device stops HSM for abort/error */
                                qc->err_mask |= AC_ERR_DEV;
-                       else
+                       else {
                                /* HSM violation. Let EH handle this */
+                               ata_ehi_push_desc(ehi,
+                                       "ST_FIRST: !(DRQ|ERR|DF)");
                                qc->err_mask |= AC_ERR_HSM;
+                       }
 
                        ap->hsm_task_state = HSM_ST_ERR;
                        goto fsm_start;
@@ -1146,9 +1150,9 @@ fsm_start:
                         * the CDB.
                         */
                        if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
-                               ata_port_printk(ap, KERN_WARNING,
-                                               "DRQ=1 with device error, "
-                                               "dev_stat 0x%X\n", status);
+                               ata_ehi_push_desc(ehi, "ST_FIRST: "
+                                       "DRQ=1 with device error, "
+                                       "dev_stat 0x%X", status);
                                qc->err_mask |= AC_ERR_HSM;
                                ap->hsm_task_state = HSM_ST_ERR;
                                goto fsm_start;
@@ -1205,9 +1209,9 @@ fsm_start:
                         * let the EH abort the command or reset the device.
                         */
                        if (unlikely(status & (ATA_ERR | ATA_DF))) {
-                               ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
-                                               "device error, dev_stat 0x%X\n",
-                                               status);
+                               ata_ehi_push_desc(ehi, "ST-ATAPI: "
+                                       "DRQ=1 with device error, "
+                                       "dev_stat 0x%X", status);
                                qc->err_mask |= AC_ERR_HSM;
                                ap->hsm_task_state = HSM_ST_ERR;
                                goto fsm_start;
@@ -1226,13 +1230,17 @@ fsm_start:
                                if (likely(status & (ATA_ERR | ATA_DF)))
                                        /* device stops HSM for abort/error */
                                        qc->err_mask |= AC_ERR_DEV;
-                               else
+                               else {
                                        /* HSM violation. Let EH handle this.
                                         * Phantom devices also trigger this
                                         * condition.  Mark hint.
                                         */
+                                       ata_ehi_push_desc(ehi, "ST-ATA: "
+                                               "DRQ=1 with device error, "
+                                               "dev_stat 0x%X", status);
                                        qc->err_mask |= AC_ERR_HSM |
                                                        AC_ERR_NODEV_HINT;
+                               }
 
                                ap->hsm_task_state = HSM_ST_ERR;
                                goto fsm_start;
@@ -1257,8 +1265,12 @@ fsm_start:
                                        status = ata_wait_idle(ap);
                                }
 
-                               if (status & (ATA_BUSY | ATA_DRQ))
+                               if (status & (ATA_BUSY | ATA_DRQ)) {
+                                       ata_ehi_push_desc(ehi, "ST-ATA: "
+                                               "BUSY|DRQ persists on ERR|DF, "
+                                               "dev_stat 0x%X", status);
                                        qc->err_mask |= AC_ERR_HSM;
+                               }
 
                                /* ata_pio_sectors() might change the
                                 * state to HSM_ST_LAST. so, the state