#include <linux/device.h>
#include <linux/string.h>
#include <linux/slab.h>
+#include <linux/amba/bus.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/hardware/amba.h>
#include <asm/sizes.h>
#define to_amba_device(d) container_of(d, struct amba_device, dev)
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/signal.h>
+#include <linux/amba/bus.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
-#include <asm/hardware/amba.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
*
*/
-#include <asm/hardware/amba_clcd.h>
+#include <linux/amba/clcd.h>
struct sys_timer;
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/smp.h>
+#include <linux/amba/bus.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/hardware/amba.h>
#include <asm/hardware/arm_timer.h>
#include <asm/arch/cm.h>
#include <asm/system.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/mm.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
#include <asm/io.h>
#include <asm/hardware/icst525.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_clcd.h>
#include <asm/arch/lm.h>
#include <asm/arch/impd1.h>
#include <asm/sizes.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/kmi.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <asm/param.h> /* HZ */
#include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_kmi.h>
#include <asm/arch/lm.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/kmi.h>
+#include <linux/amba/clcd.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_kmi.h>
-#include <asm/hardware/amba_clcd.h>
#include <asm/hardware/icst525.h>
#include <asm/arch/cm.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/amba/bus.h>
-#include <asm/hardware/amba.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/dma-mapping.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_clcd.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst307.h>
#ifndef __ASM_ARCH_REALVIEW_H
#define __ASM_ARCH_REALVIEW_H
-#include <asm/hardware/amba.h>
+#include <linux/amba/bus.h>
+
#include <asm/leds.h>
#include <asm/io.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/hardware/gic.h>
-#include <asm/hardware/amba.h>
#include <asm/hardware/icst307.h>
#include <asm/mach/arch.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_clcd.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst307.h>
#ifndef __ASM_ARCH_VERSATILE_H
#define __ASM_ARCH_VERSATILE_H
-#include <asm/hardware/amba.h>
+#include <linux/amba/bus.h>
extern void __init versatile_init(void);
extern void __init versatile_init_irq(void);
#include <linux/init.h>
#include <linux/device.h>
#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
#include <asm/mach/arch.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
#include <asm/mach/arch.h>
#include <asm/mach/mmc.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/kmi.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_kmi.h>
#include <asm/hardware/clock.h>
#define KMI_BASE (kmi->base)
#include <linux/highmem.h>
#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
+#include <linux/amba/bus.h>
#include <asm/div64.h>
#include <asm/io.h>
#include <asm/scatterlist.h>
#include <asm/sizes.h>
-#include <asm/hardware/amba.h>
#include <asm/hardware/clock.h>
#include <asm/mach/mmc.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_serial.h>
#define UART_NR 2
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
#include <asm/io.h>
#include <asm/sizes.h>
-#include <asm/hardware/amba.h>
#include <asm/hardware/clock.h>
-#include <asm/hardware/amba_serial.h>
#define UART_NR 14
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/list.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
#include <asm/sizes.h>
-#include <asm/hardware/amba.h>
#include <asm/hardware/clock.h>
-#include <asm/hardware/amba_clcd.h>
-
#define to_clcd(info) container_of(info, struct clcd_fb, fb)
/* This is limited to 16 characters when displayed by X startup */
*
*/
-#include <asm/hardware/amba_serial.h>
+#include <linux/amba/serial.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
*
*/
-#include <asm/hardware/amba_serial.h>
+#include <linux/amba/serial.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
*
*/
-#include <asm/hardware/amba_serial.h>
+#include <linux/amba/serial.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/err.h>
+#include <linux/amba/bus.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/sizes.h>
-#include <asm/hardware/amba.h>
#include <sound/driver.h>
#include <sound/core.h>