CRIS v32: Update boot/compressed/misc.c

- Shorten include paths to machine specific headers.
- Remove fill_inbuf, not defined here.
- Return __dest as value from memcpy.
- Enable serial port hardware transmitter and receiver in serial_setup.
- Correct baudrate divisor calculation, changed from 4800 to 115200.
- Add support for Artpec-3 specific serial port setup.
- Initialize pinmux for the correct serial port.

diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c
index 0169ba1ca9c90172e83dc6ed8ad6899669c29fd7..55b2695c5d70b70528ba2cbc2e94b6e8323860ee 100644 (file)
--- a/arch/cris/arch-v32/boot/compressed/misc.c
+++ b/arch/cris/arch-v32/boot/compressed/misc.c
@@ -1,8 +1,6 @@
 /*
  * misc.c
  *
- * $Id: misc.c,v 1.8 2005/04/24 18:34:29 starvik Exp $
- *
  * This is a collection of several routines from gzip-1.0.3
  * adapted for Linux.
  *
@@ -22,9 +20,13 @@
 
 
 #include <linux/types.h>
-#include <asm/arch/hwregs/reg_rdwr.h>
-#include <asm/arch/hwregs/reg_map.h>
-#include <asm/arch/hwregs/ser_defs.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/ser_defs.h>
+#include <hwregs/pinmux_defs.h>
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+#include <hwregs/clkgen_defs.h>
+#endif
 
 /*
  * gzip declarations
@@ -85,7 +87,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 #  define Tracecv(c,x)
 #endif
 
-static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
 static void gzip_mark(void **);
@@ -186,6 +187,8 @@ memset(void* s, int c, size_t n)
        char *ss = (char*)s;
 
        for (i=0;i<n;i++) ss[i] = c;
+
+       return s;
 }
 
 void*
@@ -196,6 +199,8 @@ memcpy(void* __dest, __const void* __src,
        char *d = (char *)__dest, *s = (char *)__src;
 
        for (i=0;i<__n;i++) d[i] = s[i];
+
+       return __dest;
 }
 
 /* ===========================================================================
@@ -225,15 +230,15 @@ flush_window()
 static void
 error(char *x)
 {
-       puts("\n\n");
+       puts("\r\n\n");
        puts(x);
-       puts("\n\n -- System halted\n");
+       puts("\r\n\n -- System halted\n");
 
        while(1);       /* Halt */
 }
 
 void
-setup_normal_output_buffer()
+setup_normal_output_buffer(void)
 {
        output_data = (char *)KERNEL_LOAD_ADR;
 }
@@ -262,15 +267,17 @@ serial_setup(reg_scope_instances regi_ser)
        rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div);
 
        tr_ctrl.stop_bits = 1;  /* 2 stop bits. */
+       tr_ctrl.en = 1; /* enable transmitter */
+       rec_ctrl.en = 1; /* enabler receiver */
 
        /*
-        * The baudrate setup is a bit fishy, but in the end the transceiver is
-        * set to 4800 and the receiver to 115200. The magic value is
-        * 29.493 MHz.
+        * The baudrate setup used to be a bit fishy, but now transmitter and
+        * receiver are both set to the intended baud rate, 115200.
+        * The magic value is 29.493 MHz.
         */
        tr_ctrl.base_freq = regk_ser_f29_493;
        rec_ctrl.base_freq = regk_ser_f29_493;
-       tr_baud.div = (29493000 / 8) / 4800;
+       tr_baud.div = (29493000 / 8) / 115200;
        rec_baud.div = (29493000 / 8) / 115200;
 
        REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
@@ -280,25 +287,52 @@ serial_setup(reg_scope_instances regi_ser)
 }
 
 void
-decompress_kernel()
+decompress_kernel(void)
 {
        char revision;
 
-       /* input_data is set in head.S */
-       inbuf = input_data;
+#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
+    defined(CONFIG_ETRAX_DEBUG_PORT2) || \
+    defined(CONFIG_ETRAX_DEBUG_PORT3)
+       reg_pinmux_rw_hwprot hwprot;
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+       reg_clkgen_rw_clk_ctrl clk_ctrl;
+
+       /* Enable corresponding clock region when serial 1..3 selected */
+
+       clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
+       clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes;
+       REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
+#endif
+
+       /* pinmux setup for ports 1..3 */
+       hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
+#endif
 
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
        serial_setup(regi_ser0);
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT1
+       hwprot.ser1 = regk_pinmux_yes;
        serial_setup(regi_ser1);
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT2
+       hwprot.ser2 = regk_pinmux_yes;
        serial_setup(regi_ser2);
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT3
+       hwprot.ser3 = regk_pinmux_yes;
        serial_setup(regi_ser3);
 #endif
+#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
+    defined(CONFIG_ETRAX_DEBUG_PORT2) || \
+    defined(CONFIG_ETRAX_DEBUG_PORT3)
+       REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
+#endif
+
+       /* input_data is set in head.S */
+       inbuf = input_data;
 
        setup_normal_output_buffer();
 
@@ -307,11 +341,11 @@ decompress_kernel()
        __asm__ volatile ("move $vr,%0" : "=rm" (revision));
        if (revision < 32)
        {
-               puts("You need an ETRAX FS to run Linux 2.6/crisv32.\n");
+               puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
                while(1);
        }
 
-       puts("Uncompressing Linux...\n");
+       puts("Uncompressing Linux...\r\n");
        gunzip();
-       puts("Done. Now booting the kernel.\n");
+       puts("Done. Now booting the kernel.\r\n");
 }