This corrects the documented interface for mpc52xx device trees.
Sound devices should be using 'sound' for the device_type field, not
the type of sound interface.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
mscan@<addr> mscan *-mscan CAN bus controller
pci@<addr> pci *-pci PCI bridge
serial@<addr> serial *-psc-uart PSC in serial mode
-i2s@<addr> i2s *-psc-i2s PSC in i2s mode
-ac97@<addr> ac97 *-psc-ac97 PSC in ac97 mode
+i2s@<addr> sound *-psc-i2s PSC in i2s mode
+ac97@<addr> sound *-psc-ac97 PSC in ac97 mode
spi@<addr> spi *-psc-spi PSC in spi mode
irda@<addr> irda *-psc-irda PSC in IrDA mode
spi@<addr> spi *-spi MPC52xx spi device
// PSC3 in CODEC mode example
i2s@2400 { // PSC3
- device_type = "i2s";
+ device_type = "sound";
compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s";
reg = <2400 100>;
interrupts = <2 3 0>;
// PSC6 in AC97 mode example
ac97@2c00 { // PSC6
- device_type = "ac97";
+ device_type = "sound";
compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97";
reg = <2c00 100>;
interrupts = <2 4 0>;
// PSC3 in CODEC mode example
i2s@2400 { // PSC3
- device_type = "i2s";
+ device_type = "sound";
compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s";
reg = <2400 100>;
interrupts = <2 3 0>;
// PSC6 in AC97 mode example
ac97@2c00 { // PSC6
- device_type = "ac97";
+ device_type = "sound";
compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97";
reg = <2c00 100>;
interrupts = <2 4 0>;