--- /dev/null
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This
+ * module registers serial interface that can be used to comminicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#include "anysee.h"
+#include "tda1002x.h"
+#include "mt352.h"
+#include "mt352_priv.h"
+#include "zl10353.h"
+
+/* debug */
+static int dvb_usb_anysee_debug;
+module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct mutex anysee_usb_mutex;
+
+static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
+ u8 *rbuf, u8 rlen)
+{
+ struct anysee_state *state = d->priv;
+ int act_len, ret;
+ u8 buf[64];
+
+ if (slen > sizeof(buf))
+ slen = sizeof(buf);
+ memcpy(&buf[0], sbuf, slen);
+ buf[60] = state->seq++;
+
+ if (mutex_lock_interruptible(&anysee_usb_mutex) < 0)
+ return -EAGAIN;
+
+ /* We need receive one message more after dvb_usb_generic_rw due
+ to weird transaction flow, which is 1 x send + 2 x receive. */
+ ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0);
+
+ if (!ret) {
+ /* receive 2nd answer */
+ ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
+ d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf),
+ &act_len, 2000);
+ if (ret)
+ err("%s: recv bulk message failed: %d", __func__, ret);
+ else {
+ deb_xfer("<<< ");
+ debug_dump(buf, act_len, deb_xfer);
+ }
+ }
+
+ /* read request, copy returned data to return buf */
+ if (!ret && rbuf && rlen)
+ memcpy(rbuf, buf, rlen);
+
+ mutex_unlock(&anysee_usb_mutex);
+
+ return ret;
+}
+
+static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
+{
+ u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01};
+ int ret;
+ ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1);
+ deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val);
+ return ret;
+}
+
+static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
+{
+ u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val};
+ deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val);
+ return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
+{
+ u8 buf[] = {CMD_GET_HW_INFO};
+ return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3);
+}
+
+static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00};
+ deb_info("%s: onoff:%02x\n", __func__, onoff);
+ return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval)
+{
+ u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval};
+ deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval);
+ return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff)
+{
+ u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff};
+ deb_info("%s: onoff:%02x\n", __func__, onoff);
+ return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_init(struct dvb_usb_device *d)
+{
+ int ret;
+ /* LED light */
+ ret = anysee_led_ctrl(d, 0x01, 0x03);
+ if (ret)
+ return ret;
+
+ /* enable IR */
+ ret = anysee_ir_ctrl(d, 1);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+/* I2C */
+static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int ret, inc, i = 0;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ while (i < num) {
+ if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+ u8 buf[6];
+ buf[0] = CMD_I2C_READ;
+ buf[1] = msg[i].addr + 1;
+ buf[2] = msg[i].buf[0];
+ buf[3] = 0x00;
+ buf[4] = 0x00;
+ buf[5] = 0x01;
+ ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf,
+ msg[i+1].len);
+ inc = 2;
+ } else {
+ u8 buf[4+msg[i].len];
+ buf[0] = CMD_I2C_WRITE;
+ buf[1] = msg[i].addr;
+ buf[2] = msg[i].len;
+ buf[3] = 0x01;
+ memcpy(&buf[4], msg[i].buf, msg[i].len);
+ ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+ inc = 1;
+ }
+ if (ret)
+ return ret;
+
+ i += inc;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+
+ return i;
+}
+
+static u32 anysee_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm anysee_i2c_algo = {
+ .master_xfer = anysee_master_xfer,
+ .functionality = anysee_i2c_func,
+};
+
+static int anysee_mt352_demod_init(struct dvb_frontend *fe)
+{
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 };
+ static u8 reset [] = { RESET, 0x80 };
+ static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
+ static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 };
+ static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 };
+ static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+
+ mt352_write(fe, clock_config, sizeof(clock_config));
+ udelay(200);
+ mt352_write(fe, reset, sizeof(reset));
+ mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
+
+ mt352_write(fe, agc_cfg, sizeof(agc_cfg));
+ mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
+ mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+ return 0;
+}
+
+/* Callbacks for DVB USB */
+static struct tda10023_config anysee_tda10023_config = {
+ .demod_address = 0x1a,
+ .invert = 0,
+ .xtal = 16000000,
+ .pll_m = 11,
+ .pll_p = 3,
+ .pll_n = 1,
+ .deltaf = 0xfed6,
+};
+
+static struct mt352_config anysee_mt352_config = {
+ .demod_address = 0x1e,
+ .demod_init = anysee_mt352_demod_init,
+};
+
+static struct zl10353_config anysee_zl10353_config = {
+ .demod_address = 0x1e,
+ .parallel_ts = 1,
+};
+
+static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ struct anysee_state *state = adap->dev->priv;
+ u8 hw_info[3];
+ u8 io_d; /* IO port D */
+
+ /* check which hardware we have
+ We must do this call two times to get reliable values (hw bug). */
+ ret = anysee_get_hw_info(adap->dev, hw_info);
+ if (ret)
+ return ret;
+ ret = anysee_get_hw_info(adap->dev, hw_info);
+ if (ret)
+ return ret;
+
+ /* Meaning of these info bytes are guessed. */
+ info("firmware version:%d.%d.%d hardware id:%d",
+ 0, hw_info[1], hw_info[2], hw_info[0]);
+
+ ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */
+ if (ret)
+ return ret;
+ deb_info("%s: IO port D:%02x\n", __func__, io_d);
+
+ /* Select demod using trial and error method. */
+
+ /* Try to attach demodulator in following order:
+ model demod hw firmware
+ 1. E30 MT352 02 0.2.1
+ 2. E30 ZL10353 02 0.2.1
+ 3. E30 Plus ZL10353 06 0.1.0
+ 4. E30C Plus TDA10023 0a 0.1.0
+ E30C Plus TDA10023 0f 0.1.2 (not working)
+ */
+
+ /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
+ adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config,
+ &adap->dev->i2c_adap);
+ if (adap->fe != NULL) {
+ state->tuner = DVB_PLL_THOMSON_DTT7579;
+ return 0;
+ }
+
+ /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
+ adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+ &adap->dev->i2c_adap);
+ if (adap->fe != NULL) {
+ state->tuner = DVB_PLL_THOMSON_DTT7579;
+ return 0;
+ }
+
+ /* connect demod on IO port D for TDA10023 & ZL10353 */
+ ret = anysee_write_reg(adap->dev, 0xb0, 0x25);
+ if (ret)
+ return ret;
+
+ /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
+ adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+ &adap->dev->i2c_adap);
+ if (adap->fe != NULL) {
+ state->tuner = DVB_PLL_THOMSON_DTT7579;
+ return 0;
+ }
+
+ /* known not working (E30C Plus v0.1.2) */
+ if (hw_info[0] == 0x0f) {
+ info("this version of Anysee is not supported yet");
+ /* return IO port D to init value for safe */
+ ret = anysee_write_reg(adap->dev, 0xb0, io_d);
+ return -ENODEV;
+ }
+
+ /* Philips TDA10023 DVB-C demod */
+ adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
+ &adap->dev->i2c_adap, 0x48);
+ if (adap->fe != NULL) {
+ state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
+ return 0;
+ }
+
+ /* return IO port D to init value for safe */
+ ret = anysee_write_reg(adap->dev, 0xb0, io_d);
+ if (ret)
+ return ret;
+
+ err("Unkown Anysee version: %02x %02x %02x. "\
+ "Please report the <linux-dvb@linuxtv.org>.",
+ hw_info[0], hw_info[1], hw_info[2]);
+
+ return -ENODEV;
+}
+
+static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct anysee_state *state = adap->dev->priv;
+ deb_info("%s: \n", __func__);
+
+ switch (state->tuner) {
+ case DVB_PLL_THOMSON_DTT7579:
+ /* Thomson dtt7579 (not sure) PLL inside of:
+ Samsung DNOS404ZH102A NIM
+ Samsung DNOS404ZH103A NIM */
+ dvb_attach(dvb_pll_attach, adap->fe, 0x61,
+ NULL, DVB_PLL_THOMSON_DTT7579);
+ break;
+ case DVB_PLL_SAMSUNG_DTOS403IH102A:
+ /* Unknown PLL inside of Samsung DTOS403IH102A tuner module */
+ dvb_attach(dvb_pll_attach, adap->fe, 0xc0,
+ &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
+ break;
+ }
+
+ return 0;
+}
+
+static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+ u8 buf[] = {CMD_GET_IR_CODE};
+ struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+ u8 ircode[2];
+ int i, ret;
+
+ ret = anysee_ctrl_msg(d, buf, sizeof(buf), &ircode[0], 2);
+ if (ret)
+ return ret;
+
+ *event = 0;
+ *state = REMOTE_NO_KEY_PRESSED;
+
+ for (i = 0; i < d->props.rc_key_map_size; i++) {
+ if (keymap[i].custom == ircode[0] &&
+ keymap[i].data == ircode[1]) {
+ *event = keymap[i].event;
+ *state = REMOTE_KEY_PRESSED;
+ return 0;
+ }
+ }
+ return 0;
+}
+
+static struct dvb_usb_rc_key anysee_rc_keys[] = {
+ { 0x01, 0x00, KEY_0 },
+ { 0x01, 0x01, KEY_1 },
+ { 0x01, 0x02, KEY_2 },
+ { 0x01, 0x03, KEY_3 },
+ { 0x01, 0x04, KEY_4 },
+ { 0x01, 0x05, KEY_5 },
+ { 0x01, 0x06, KEY_6 },
+ { 0x01, 0x07, KEY_7 },
+ { 0x01, 0x08, KEY_8 },
+ { 0x01, 0x09, KEY_9 },
+ { 0x01, 0x0a, KEY_POWER },
+ { 0x01, 0x0b, KEY_DOCUMENTS }, /* * */
+ { 0x01, 0x19, KEY_FAVORITES },
+ { 0x01, 0x20, KEY_SLEEP },
+ { 0x01, 0x21, KEY_MODE }, /* 4:3 / 16:9 select */
+ { 0x01, 0x22, KEY_ZOOM },
+ { 0x01, 0x47, KEY_TEXT },
+ { 0x01, 0x16, KEY_TV }, /* TV / radio select */
+ { 0x01, 0x1e, KEY_LANGUAGE }, /* Second Audio Program */
+ { 0x01, 0x1a, KEY_SUBTITLE },
+ { 0x01, 0x1b, KEY_CAMERA }, /* screenshot */
+ { 0x01, 0x42, KEY_MUTE },
+ { 0x01, 0x0e, KEY_MENU },
+ { 0x01, 0x0f, KEY_EPG },
+ { 0x01, 0x17, KEY_INFO },
+ { 0x01, 0x10, KEY_EXIT },
+ { 0x01, 0x13, KEY_VOLUMEUP },
+ { 0x01, 0x12, KEY_VOLUMEDOWN },
+ { 0x01, 0x11, KEY_CHANNELUP },
+ { 0x01, 0x14, KEY_CHANNELDOWN },
+ { 0x01, 0x15, KEY_OK },
+ { 0x01, 0x1d, KEY_RED },
+ { 0x01, 0x1f, KEY_GREEN },
+ { 0x01, 0x1c, KEY_YELLOW },
+ { 0x01, 0x44, KEY_BLUE },
+ { 0x01, 0x0c, KEY_SHUFFLE }, /* snapshot */
+ { 0x01, 0x48, KEY_STOP },
+ { 0x01, 0x50, KEY_PLAY },
+ { 0x01, 0x51, KEY_PAUSE },
+ { 0x01, 0x49, KEY_RECORD },
+ { 0x01, 0x18, KEY_PREVIOUS }, /* |<< */
+ { 0x01, 0x0d, KEY_NEXT }, /* >>| */
+ { 0x01, 0x24, KEY_PROG1 }, /* F1 */
+ { 0x01, 0x25, KEY_PROG2 }, /* F2 */
+};
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties anysee_properties;
+
+static int anysee_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct dvb_usb_device *d;
+ struct usb_host_interface *alt;
+ int ret;
+
+ mutex_init(&anysee_usb_mutex);
+
+ /* There is one interface with two alternate settings.
+ Alternate setting 0 is for bulk transfer.
+ Alternate setting 1 is for isochronous transfer.
+ We use bulk transfer (alternate setting 0). */
+ if (intf->num_altsetting < 1)
+ return -ENODEV;
+
+ ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d,
+ adapter_nr);
+ if (ret)
+ return ret;
+
+ alt = usb_altnum_to_altsetting(intf, 0);
+ if (alt == NULL) {
+ deb_info("%s: no alt found!\n", __func__);
+ return -ENODEV;
+ }
+
+ ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
+ alt->desc.bAlternateSetting);
+ if (ret)
+ return ret;
+
+ if (d)
+ ret = anysee_init(d);
+
+ return ret;
+}
+
+static struct usb_device_id anysee_table [] = {
+ { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) },
+ { USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) },
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, anysee_table);
+
+static struct dvb_usb_device_properties anysee_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = DEVICE_SPECIFIC,
+
+ .size_of_priv = sizeof(struct anysee_state),
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .streaming_ctrl = anysee_streaming_ctrl,
+ .frontend_attach = anysee_frontend_attach,
+ .tuner_attach = anysee_tuner_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 512,
+ }
+ }
+ },
+ }
+ },
+
+ .rc_key_map = anysee_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(anysee_rc_keys),
+ .rc_query = anysee_rc_query,
+ .rc_interval = 200, /* windows driver uses 500ms */
+
+ .i2c_algo = &anysee_i2c_algo,
+
+ .generic_bulk_ctrl_endpoint = 1,
+
+ .num_device_descs = 1,
+ .devices = {
+ {
+ .name = "Anysee DVB USB2.0",
+ .cold_ids = {NULL},
+ .warm_ids = {&anysee_table[0],
+ &anysee_table[1], NULL},
+ },
+ }
+};
+
+static struct usb_driver anysee_driver = {
+ .name = "dvb_usb_anysee",
+ .probe = anysee_probe,
+ .disconnect = dvb_usb_device_exit,
+ .id_table = anysee_table,
+};
+
+/* module stuff */
+static int __init anysee_module_init(void)
+{
+ int ret;
+
+ ret = usb_register(&anysee_driver);
+ if (ret)
+ err("%s: usb_register failed. Error number %d", __func__, ret);
+
+ return ret;
+}
+
+static void __exit anysee_module_exit(void)
+{
+ /* deregister this driver from the USB subsystem */
+ usb_deregister(&anysee_driver);
+}
+
+module_init(anysee_module_init);
+module_exit(anysee_module_exit);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This
+ * module registers serial interface that can be used to comminicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#ifndef _DVB_USB_ANYSEE_H_
+#define _DVB_USB_ANYSEE_H_
+
+#define DVB_USB_LOG_PREFIX "anysee"
+#include "dvb-usb.h"
+
+#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args)
+#define deb_rc(args...) dprintk(dvb_usb_anysee_debug, 0x04, args)
+#define deb_reg(args...) dprintk(dvb_usb_anysee_debug, 0x08, args)
+#define deb_i2c(args...) dprintk(dvb_usb_anysee_debug, 0x10, args)
+#define deb_fw(args...) dprintk(dvb_usb_anysee_debug, 0x20, args)
+
+enum cmd {
+ CMD_I2C_READ = 0x33,
+ CMD_I2C_WRITE = 0x31,
+ CMD_REG_READ = 0xb0,
+ CMD_REG_WRITE = 0xb1,
+ CMD_STREAMING_CTRL = 0x12,
+ CMD_LED_AND_IR_CTRL = 0x16,
+ CMD_GET_IR_CODE = 0x41,
+ CMD_GET_HW_INFO = 0x19,
+ CMD_SMARTCARD = 0x34,
+};
+
+struct anysee_state {
+ u8 tuner;
+ u8 seq;
+};
+
+#endif
+
+/***************************************************************************
+ * USB API description (reverse engineered)
+ ***************************************************************************
+
+Transaction flow:
+=================
+BULK[00001] >>> REQUEST PACKET 64 bytes
+BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY)
+BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY)
+
+General reply packet(s) are always used if not own reply defined.
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY)
+============================================================================
+| 00 | reply data (if any) from previous transaction
+| | Just same reply packet as returned during previous transaction.
+| | Needed only if reply is missed in previous transaction.
+| | Just skip normally.
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY)
+============================================================================
+| 00 | reply data (if any)
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C WRITE REQUEST PACKET
+============================================================================
+| 00 | 0x31 I2C write command
+----------------------------------------------------------------------------
+| 01 | i2c address
+----------------------------------------------------------------------------
+| 02 | data length
+| | 0x02 (for typical I2C reg / val pair)
+----------------------------------------------------------------------------
+| 03 | 0x01
+----------------------------------------------------------------------------
+| 04- | data
+----------------------------------------------------------------------------
+| -59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C READ REQUEST PACKET
+============================================================================
+| 00 | 0x33 I2C read command
+----------------------------------------------------------------------------
+| 01 | i2c address + 1
+----------------------------------------------------------------------------
+| 02 | register
+----------------------------------------------------------------------------
+| 03 | 0x00
+----------------------------------------------------------------------------
+| 04 | 0x00
+----------------------------------------------------------------------------
+| 05 | 0x01
+----------------------------------------------------------------------------
+| 06-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET
+============================================================================
+| 00 | 0xb1 register write command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+| 03 | 0x01
+----------------------------------------------------------------------------
+| 04 | value
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET
+============================================================================
+| 00 | 0xb0 register read command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+| 03 | 0x01
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | LED CONTROL REQUEST PACKET
+============================================================================
+| 00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+| 01 | 0x01 (LED)
+----------------------------------------------------------------------------
+| 03 | 0x00 blink
+| | 0x01 lights continuously
+----------------------------------------------------------------------------
+| 04 | blink interval
+| | 0x00 fastest (looks like LED lights continuously)
+| | 0xff slowest
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | IR CONTROL REQUEST PACKET
+============================================================================
+| 00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+| 01 | 0x02 (IR)
+----------------------------------------------------------------------------
+| 03 | 0x00 IR disabled
+| | 0x01 IR enabled
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | STREAMING CONTROL REQUEST PACKET
+============================================================================
+| 00 | 0x12 streaming control command
+----------------------------------------------------------------------------
+| 01 | 0x00 streaming disabled
+| | 0x01 streaming enabled
+----------------------------------------------------------------------------
+| 02 | 0x00
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REQUEST PACKET
+============================================================================
+| 00 | 0x41 remote control command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REPLY PACKET
+============================================================================
+| 00 | 0x00 code not received
+| | 0x01 code received
+----------------------------------------------------------------------------
+| 01 | remote control code
+----------------------------------------------------------------------------
+| 02-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REQUEST PACKET
+============================================================================
+| 00 | 0x19 get hardware info command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REPLY PACKET
+============================================================================
+| 00 | hardware id
+----------------------------------------------------------------------------
+| 01-02 | firmware version
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | SMART CARD READER PACKET
+============================================================================
+| 00 | 0x34 smart card reader command
+----------------------------------------------------------------------------
+| xx |
+----------------------------------------------------------------------------
+| xx-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+*/
projects / linux-2.6 / commitdiff