config RADSTONE_PPC7D
bool "Radstone Technology PPC7D board"
-config ADIR
- bool "SBS-Adirondack"
-
config K2
bool "SBS-K2"
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_EMBEDDED is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-
-#
-# IBM 4xx options
-#
-# CONFIG_8260 is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_STD_MMU=y
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW_2 is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-CONFIG_ADIR=y
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
-# CONFIG_PARPORT_SERIAL is not set
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
-# CONFIG_PARPORT_OTHER is not set
-CONFIG_PARPORT_1284=y
-# CONFIG_PPC601_SYNC_FIX is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-CONFIG_SCSI=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C7xx is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-CONFIG_SCSI_NCR53C8XX=y
-CONFIG_SCSI_SYM53C8XX=y
-CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
-CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
-CONFIG_SCSI_NCR53C8XX_SYNC=20
-# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
-# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_UNCLEAN=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_MIRROR=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_UHCI_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_HP8200e is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-CONFIG_USB_HID=m
-
-#
-# Input core support is needed for USB HID input layer or HIDBP support
-#
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
endif
obj-$(CONFIG_PMAC_BACKLIGHT) += pmac_backlight.o
obj-$(CONFIG_PREP_RESIDUAL) += residual.o
-obj-$(CONFIG_ADIR) += adir_setup.o adir_pic.o adir_pci.o
obj-$(CONFIG_PQ2ADS) += pq2ads.o
obj-$(CONFIG_TQM8260) += tqm8260_setup.o
obj-$(CONFIG_CPCI690) += cpci690.o
+++ /dev/null
-/*
- * arch/ppc/platforms/adir.h
- *
- * Definitions for SBS Adirondack board support
- *
- * By Michael Sokolov <msokolov@ivan.Harhan.ORG>
- */
-
-#ifndef __PPC_PLATFORMS_ADIR_H
-#define __PPC_PLATFORMS_ADIR_H
-
-/*
- * SBS Adirondack definitions
- */
-
-/* PPC physical address space layout. We use the one set up by the firmware. */
-#define ADIR_PCI32_MEM_BASE 0x80000000
-#define ADIR_PCI32_MEM_SIZE 0x20000000
-#define ADIR_PCI64_MEM_BASE 0xA0000000
-#define ADIR_PCI64_MEM_SIZE 0x20000000
-#define ADIR_PCI32_IO_BASE 0xC0000000
-#define ADIR_PCI32_IO_SIZE 0x10000000
-#define ADIR_PCI64_IO_BASE 0xD0000000
-#define ADIR_PCI64_IO_SIZE 0x10000000
-#define ADIR_PCI64_PHB 0xFF400000
-#define ADIR_PCI32_PHB 0xFF500000
-
-#define ADIR_PCI64_CONFIG_ADDR (ADIR_PCI64_PHB + 0x000f8000)
-#define ADIR_PCI64_CONFIG_DATA (ADIR_PCI64_PHB + 0x000f8010)
-
-#define ADIR_PCI32_CONFIG_ADDR (ADIR_PCI32_PHB + 0x000f8000)
-#define ADIR_PCI32_CONFIG_DATA (ADIR_PCI32_PHB + 0x000f8010)
-
-/* System memory as seen from PCI */
-#define ADIR_PCI_SYS_MEM_BASE 0x80000000
-
-/* Static virtual mapping of PCI I/O */
-#define ADIR_PCI32_VIRT_IO_BASE 0xFE000000
-#define ADIR_PCI32_VIRT_IO_SIZE 0x01000000
-#define ADIR_PCI64_VIRT_IO_BASE 0xFF000000
-#define ADIR_PCI64_VIRT_IO_SIZE 0x01000000
-
-/* Registers */
-#define ADIR_NVRAM_RTC_ADDR 0x74
-#define ADIR_NVRAM_RTC_DATA 0x75
-
-#define ADIR_BOARD_ID_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF0)
-#define ADIR_CPLD1REV_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF1)
-#define ADIR_CPLD2REV_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF2)
-#define ADIR_FLASHCTL_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF3)
-#define ADIR_CPC710_STAT_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF4)
-#define ADIR_CLOCK_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF5)
-#define ADIR_GPIO_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF8)
-#define ADIR_MISC_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF9)
-#define ADIR_LED_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFFA)
-
-#define ADIR_CLOCK_REG_PD 0x10
-#define ADIR_CLOCK_REG_SPREAD 0x08
-#define ADIR_CLOCK_REG_SEL133 0x04
-#define ADIR_CLOCK_REG_SEL1 0x02
-#define ADIR_CLOCK_REG_SEL0 0x01
-
-#define ADIR_PROCA_INT_MASK (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF0)
-#define ADIR_PROCB_INT_MASK (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF2)
-#define ADIR_PROCA_INT_STAT (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF4)
-#define ADIR_PROCB_INT_STAT (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF6)
-
-/* Linux IRQ numbers */
-#define ADIR_IRQ_NONE -1
-#define ADIR_IRQ_SERIAL2 3
-#define ADIR_IRQ_SERIAL1 4
-#define ADIR_IRQ_FDC 6
-#define ADIR_IRQ_PARALLEL 7
-#define ADIR_IRQ_VIA_AUDIO 10
-#define ADIR_IRQ_VIA_USB 11
-#define ADIR_IRQ_IDE0 14
-#define ADIR_IRQ_IDE1 15
-#define ADIR_IRQ_PCI0_INTA 16
-#define ADIR_IRQ_PCI0_INTB 17
-#define ADIR_IRQ_PCI0_INTC 18
-#define ADIR_IRQ_PCI0_INTD 19
-#define ADIR_IRQ_PCI1_INTA 20
-#define ADIR_IRQ_PCI1_INTB 21
-#define ADIR_IRQ_PCI1_INTC 22
-#define ADIR_IRQ_PCI1_INTD 23
-#define ADIR_IRQ_MBSCSI 24 /* motherboard SCSI */
-#define ADIR_IRQ_MBETH1 25 /* motherboard Ethernet 1 */
-#define ADIR_IRQ_MBETH0 26 /* motherboard Ethernet 0 */
-#define ADIR_IRQ_CPC710_INT1 27
-#define ADIR_IRQ_CPC710_INT2 28
-#define ADIR_IRQ_VT82C686_NMI 29
-#define ADIR_IRQ_VT82C686_INTR 30
-#define ADIR_IRQ_INTERPROC 31
-
-#endif /* __PPC_PLATFORMS_ADIR_H */
+++ /dev/null
-/*
- * arch/ppc/platforms/adir_pci.c
- *
- * PCI support for SBS Adirondack
- *
- * By Michael Sokolov <msokolov@ivan.Harhan.ORG>
- * based on the K2 version by Matt Porter <mporter@mvista.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-
-#include <syslib/cpc710.h>
-#include "adir.h"
-
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif /* DEBUG */
-
-static inline int __init
-adir_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-#define PCIIRQ(a,b,c,d) {ADIR_IRQ_##a,ADIR_IRQ_##b,ADIR_IRQ_##c,ADIR_IRQ_##d},
- struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
- /*
- * The three PCI devices on the motherboard have dedicated lines to the
- * CPLD interrupt controller, bypassing the standard PCI INTA-D and the
- * PC interrupt controller. All other PCI devices (slots) have usual
- * staggered INTA-D lines, resulting in 8 lines total (PCI0 INTA-D and
- * PCI1 INTA-D). All 8 go to the CPLD interrupt controller. PCI0 INTA-D
- * also go to the south bridge, so we have the option of taking them
- * via the CPLD interrupt controller or via the south bridge 8259
- * 8258 thingy. PCI1 INTA-D can only be taken via the CPLD interrupt
- * controller. We take all PCI interrupts via the CPLD interrupt
- * controller as recommended by SBS.
- *
- * We also have some monkey business with the PCI devices within the
- * VT82C686B south bridge itself. This chip actually has 7 functions on
- * its IDSEL. Function 0 is the actual south bridge, function 1 is IDE,
- * and function 4 is some special stuff. The other 4 functions are just
- * regular PCI devices bundled in the chip. 2 and 3 are USB UHCIs and 5
- * and 6 are audio (not supported on the Adirondack).
- *
- * This is where the monkey business begins. PCI devices are supposed
- * to signal normal PCI interrupts. But the 4 functions in question are
- * located in the south bridge chip, which is designed with the
- * assumption that it will be fielding PCI INTA-D interrupts rather
- * than generating them. Here's what it does. Each of the functions in
- * question routes its interrupt to one of the IRQs on the 8259 thingy.
- * Which one? It looks at the Interrupt Line register in the PCI config
- * space, even though the PCI spec says it's for BIOS/OS interaction
- * only.
- *
- * How do we deal with this? We take these interrupts via 8259 IRQs as
- * we have to. We return the desired IRQ numbers from this routine when
- * called for the functions in question. The PCI scan code will then
- * stick our return value into the Interrupt Line register in the PCI
- * config space, and the interrupt will actually go there. We identify
- * these functions within the south bridge IDSEL by their interrupt pin
- * numbers, as the VT82C686B has 04 in the Interrupt Pin register for
- * USB and 03 for audio.
- */
- if (!hose->index) {
- static char pci_irq_table[][4] =
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- /* south bridge */ PCIIRQ(IDE0, NONE, VIA_AUDIO, VIA_USB)
- /* Ethernet 0 */ PCIIRQ(MBETH0, MBETH0, MBETH0, MBETH0)
- /* PCI0 slot 1 */ PCIIRQ(PCI0_INTB, PCI0_INTC, PCI0_INTD, PCI0_INTA)
- /* PCI0 slot 2 */ PCIIRQ(PCI0_INTC, PCI0_INTD, PCI0_INTA, PCI0_INTB)
- /* PCI0 slot 3 */ PCIIRQ(PCI0_INTD, PCI0_INTA, PCI0_INTB, PCI0_INTC)
- };
- const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
- } else {
- static char pci_irq_table[][4] =
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- /* Ethernet 1 */ PCIIRQ(MBETH1, MBETH1, MBETH1, MBETH1)
- /* SCSI */ PCIIRQ(MBSCSI, MBSCSI, MBSCSI, MBSCSI)
- /* PCI1 slot 1 */ PCIIRQ(PCI1_INTB, PCI1_INTC, PCI1_INTD, PCI1_INTA)
- /* PCI1 slot 2 */ PCIIRQ(PCI1_INTC, PCI1_INTD, PCI1_INTA, PCI1_INTB)
- /* PCI1 slot 3 */ PCIIRQ(PCI1_INTD, PCI1_INTA, PCI1_INTB, PCI1_INTC)
- };
- const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
- }
-#undef PCIIRQ
-}
-
-static void
-adir_pcibios_fixup_resources(struct pci_dev *dev)
-{
- int i;
-
- if ((dev->vendor == PCI_VENDOR_ID_IBM) &&
- (dev->device == PCI_DEVICE_ID_IBM_CPC710_PCI64))
- {
- DBG("Fixup CPC710 resources\n");
- for (i=0; i<DEVICE_COUNT_RESOURCE; i++)
- {
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- }
- }
-}
-
-/*
- * CPC710 DD3 has an errata causing it to hang the system if a type 0 config
- * cycle is attempted on its PCI32 interface with a device number > 21.
- * CPC710's PCI bridges map device numbers 1 through 21 to AD11 through AD31.
- * Per the PCI spec it MUST accept all other device numbers and do nothing, and
- * software MUST scan all device numbers without assuming how IDSELs are
- * mapped. However, as the CPC710 DD3's errata causes such correct scanning
- * procedure to hang the system, we have no choice but to introduce this hack
- * of knowingly avoiding device numbers > 21 on PCI0,
- */
-static int
-adir_exclude_device(u_char bus, u_char devfn)
-{
- if ((bus == 0) && (PCI_SLOT(devfn) > 21))
- return PCIBIOS_DEVICE_NOT_FOUND;
- else
- return PCIBIOS_SUCCESSFUL;
-}
-
-void adir_find_bridges(void)
-{
- struct pci_controller *hose_a, *hose_b;
-
- /* Setup PCI32 hose */
- hose_a = pcibios_alloc_controller();
- if (!hose_a)
- return;
-
- hose_a->first_busno = 0;
- hose_a->last_busno = 0xff;
- hose_a->pci_mem_offset = ADIR_PCI32_MEM_BASE;
- hose_a->io_space.start = 0;
- hose_a->io_space.end = ADIR_PCI32_VIRT_IO_SIZE - 1;
- hose_a->mem_space.start = 0;
- hose_a->mem_space.end = ADIR_PCI32_MEM_SIZE - 1;
- hose_a->io_resource.start = 0;
- hose_a->io_resource.end = ADIR_PCI32_VIRT_IO_SIZE - 1;
- hose_a->io_resource.flags = IORESOURCE_IO;
- hose_a->mem_resources[0].start = ADIR_PCI32_MEM_BASE;
- hose_a->mem_resources[0].end = ADIR_PCI32_MEM_BASE +
- ADIR_PCI32_MEM_SIZE - 1;
- hose_a->mem_resources[0].flags = IORESOURCE_MEM;
- hose_a->io_base_phys = ADIR_PCI32_IO_BASE;
- hose_a->io_base_virt = (void *) ADIR_PCI32_VIRT_IO_BASE;
-
- ppc_md.pci_exclude_device = adir_exclude_device;
- setup_indirect_pci(hose_a, ADIR_PCI32_CONFIG_ADDR,
- ADIR_PCI32_CONFIG_DATA);
-
- /* Initialize PCI32 bus registers */
- early_write_config_byte(hose_a,
- hose_a->first_busno,
- PCI_DEVFN(0, 0),
- CPC710_BUS_NUMBER,
- hose_a->first_busno);
- early_write_config_byte(hose_a,
- hose_a->first_busno,
- PCI_DEVFN(0, 0),
- CPC710_SUB_BUS_NUMBER,
- hose_a->last_busno);
-
- hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
-
- /* Write out correct max subordinate bus number for hose A */
- early_write_config_byte(hose_a,
- hose_a->first_busno,
- PCI_DEVFN(0, 0),
- CPC710_SUB_BUS_NUMBER,
- hose_a->last_busno);
-
- /* Setup PCI64 hose */
- hose_b = pcibios_alloc_controller();
- if (!hose_b)
- return;
-
- hose_b->first_busno = hose_a->last_busno + 1;
- hose_b->last_busno = 0xff;
- hose_b->pci_mem_offset = ADIR_PCI64_MEM_BASE;
- hose_b->io_space.start = 0;
- hose_b->io_space.end = ADIR_PCI64_VIRT_IO_SIZE - 1;
- hose_b->mem_space.start = 0;
- hose_b->mem_space.end = ADIR_PCI64_MEM_SIZE - 1;
- hose_b->io_resource.start = 0;
- hose_b->io_resource.end = ADIR_PCI64_VIRT_IO_SIZE - 1;
- hose_b->io_resource.flags = IORESOURCE_IO;
- hose_b->mem_resources[0].start = ADIR_PCI64_MEM_BASE;
- hose_b->mem_resources[0].end = ADIR_PCI64_MEM_BASE +
- ADIR_PCI64_MEM_SIZE - 1;
- hose_b->mem_resources[0].flags = IORESOURCE_MEM;
- hose_b->io_base_phys = ADIR_PCI64_IO_BASE;
- hose_b->io_base_virt = (void *) ADIR_PCI64_VIRT_IO_BASE;
-
- setup_indirect_pci(hose_b, ADIR_PCI64_CONFIG_ADDR,
- ADIR_PCI64_CONFIG_DATA);
-
- /* Initialize PCI64 bus registers */
- early_write_config_byte(hose_b,
- 0,
- PCI_DEVFN(0, 0),
- CPC710_SUB_BUS_NUMBER,
- 0xff);
-
- early_write_config_byte(hose_b,
- 0,
- PCI_DEVFN(0, 0),
- CPC710_BUS_NUMBER,
- hose_b->first_busno);
-
- hose_b->last_busno = pciauto_bus_scan(hose_b,
- hose_b->first_busno);
-
- /* Write out correct max subordinate bus number for hose B */
- early_write_config_byte(hose_b,
- hose_b->first_busno,
- PCI_DEVFN(0, 0),
- CPC710_SUB_BUS_NUMBER,
- hose_b->last_busno);
-
- ppc_md.pcibios_fixup = NULL;
- ppc_md.pcibios_fixup_resources = adir_pcibios_fixup_resources;
- ppc_md.pci_swizzle = common_swizzle;
- ppc_md.pci_map_irq = adir_map_irq;
-}
+++ /dev/null
-/*
- * arch/ppc/platforms/adir_pic.c
- *
- * Interrupt controller support for SBS Adirondack
- *
- * By Michael Sokolov <msokolov@ivan.Harhan.ORG>
- * based on the K2 and SCM versions by Matt Porter <mporter@mvista.com>
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/i8259.h>
-#include "adir.h"
-
-static void adir_onboard_pic_enable(unsigned int irq);
-static void adir_onboard_pic_disable(unsigned int irq);
-
-__init static void
-adir_onboard_pic_init(void)
-{
- volatile u_short *maskreg = (volatile u_short *) ADIR_PROCA_INT_MASK;
-
- /* Disable all Adirondack onboard interrupts */
- out_be16(maskreg, 0xFFFF);
-}
-
-static int
-adir_onboard_pic_get_irq(void)
-{
- volatile u_short *statreg = (volatile u_short *) ADIR_PROCA_INT_STAT;
- int irq;
- u_short int_status, int_test;
-
- int_status = in_be16(statreg);
- for (irq = 0, int_test = 1; irq < 16; irq++, int_test <<= 1) {
- if (int_status & int_test)
- break;
- }
-
- if (irq == 16)
- return -1;
-
- return (irq+16);
-}
-
-static void
-adir_onboard_pic_enable(unsigned int irq)
-{
- volatile u_short *maskreg = (volatile u_short *) ADIR_PROCA_INT_MASK;
-
- /* Change irq to Adirondack onboard native value */
- irq -= 16;
-
- /* Enable requested irq number */
- out_be16(maskreg, in_be16(maskreg) & ~(1 << irq));
-}
-
-static void
-adir_onboard_pic_disable(unsigned int irq)
-{
- volatile u_short *maskreg = (volatile u_short *) ADIR_PROCA_INT_MASK;
-
- /* Change irq to Adirondack onboard native value */
- irq -= 16;
-
- /* Disable requested irq number */
- out_be16(maskreg, in_be16(maskreg) | (1 << irq));
-}
-
-static struct hw_interrupt_type adir_onboard_pic = {
- " ADIR PIC ",
- NULL,
- NULL,
- adir_onboard_pic_enable, /* unmask */
- adir_onboard_pic_disable, /* mask */
- adir_onboard_pic_disable, /* mask and ack */
- NULL,
- NULL
-};
-
-static struct irqaction noop_action = {
- .handler = no_action,
- .flags = SA_INTERRUPT,
- .mask = CPU_MASK_NONE,
- .name = "82c59 primary cascade",
-};
-
-/*
- * Linux interrupt values are assigned as follows:
- *
- * 0-15 VT82C686 8259 interrupts
- * 16-31 Adirondack CPLD interrupts
- */
-__init void
-adir_init_IRQ(void)
-{
- int i;
-
- /* Initialize the cascaded 8259's on the VT82C686 */
- for (i=0; i<16; i++)
- irq_desc[i].handler = &i8259_pic;
- i8259_init(NULL);
-
- /* Initialize Adirondack CPLD PIC and enable 8259 interrupt cascade */
- for (i=16; i<32; i++)
- irq_desc[i].handler = &adir_onboard_pic;
- adir_onboard_pic_init();
-
- /* Enable 8259 interrupt cascade */
- setup_irq(ADIR_IRQ_VT82C686_INTR, &noop_action);
-}
-
-int
-adir_get_irq(struct pt_regs *regs)
-{
- int irq;
-
- if ((irq = adir_onboard_pic_get_irq()) < 0)
- return irq;
-
- if (irq == ADIR_IRQ_VT82C686_INTR)
- irq = i8259_irq(regs);
-
- return irq;
-}
+++ /dev/null
-/*
- * arch/ppc/platforms/adir_setup.c
- *
- * Board setup routines for SBS Adirondack
- *
- * By Michael Sokolov <msokolov@ivan.Harhan.ORG>
- * based on the K2 version by Matt Porter <mporter@mvista.com>
- */
-
-#include <linux/config.h>
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-
-#include "adir.h"
-
-extern void adir_init_IRQ(void);
-extern int adir_get_irq(struct pt_regs *);
-extern void adir_find_bridges(void);
-extern unsigned long loops_per_jiffy;
-
-static unsigned int cpu_750cx[16] = {
- 5, 15, 14, 0, 4, 13, 0, 9, 6, 11, 8, 10, 16, 12, 7, 0
-};
-
-static int
-adir_get_bus_speed(void)
-{
- if (!(*((u_char *) ADIR_CLOCK_REG) & ADIR_CLOCK_REG_SEL133))
- return 100000000;
- else
- return 133333333;
-}
-
-static int
-adir_get_cpu_speed(void)
-{
- unsigned long hid1;
- int cpu_speed;
-
- hid1 = mfspr(SPRN_HID1) >> 28;
-
- hid1 = cpu_750cx[hid1];
-
- cpu_speed = adir_get_bus_speed()*hid1/2;
- return cpu_speed;
-}
-
-static void __init
-adir_calibrate_decr(void)
-{
- int freq, divisor = 4;
-
- /* determine processor bus speed */
- freq = adir_get_bus_speed();
- tb_ticks_per_jiffy = freq / HZ / divisor;
- tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
-}
-
-static int
-adir_show_cpuinfo(struct seq_file *m)
-{
- seq_printf(m, "vendor\t\t: SBS\n");
- seq_printf(m, "machine\t\t: Adirondack\n");
- seq_printf(m, "cpu speed\t: %dMhz\n", adir_get_cpu_speed()/1000000);
- seq_printf(m, "bus speed\t: %dMhz\n", adir_get_bus_speed()/1000000);
- seq_printf(m, "memory type\t: SDRAM\n");
-
- return 0;
-}
-
-extern char cmd_line[];
-
-TODC_ALLOC();
-
-static void __init
-adir_setup_arch(void)
-{
- unsigned int cpu;
-
- /* Setup TODC access */
- TODC_INIT(TODC_TYPE_MC146818, ADIR_NVRAM_RTC_ADDR, 0,
- ADIR_NVRAM_RTC_DATA, 8);
-
- /* init to some ~sane value until calibrate_delay() runs */
- loops_per_jiffy = 50000000/HZ;
-
- /* Setup PCI host bridges */
- adir_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_SDA1;
-#endif
-
- /* Identify the system */
- printk("System Identification: SBS Adirondack - PowerPC 750CXe @ %d Mhz\n", adir_get_cpu_speed()/1000000);
- printk("SBS Adirondack port (C) 2001 SBS Technologies, Inc.\n");
-
- /* Identify the CPU manufacturer */
- cpu = mfspr(SPRN_PVR);
- printk("CPU manufacturer: IBM [rev=%04x]\n", (cpu & 0xffff));
-}
-
-static void
-adir_restart(char *cmd)
-{
- local_irq_disable();
- /* SRR0 has system reset vector, SRR1 has default MSR value */
- /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
- __asm__ __volatile__
- ("lis 3,0xfff0\n\t"
- "ori 3,3,0x0100\n\t"
- "mtspr 26,3\n\t"
- "li 3,0\n\t"
- "mtspr 27,3\n\t"
- "rfi\n\t");
- for(;;);
-}
-
-static void
-adir_power_off(void)
-{
- for(;;);
-}
-
-static void
-adir_halt(void)
-{
- adir_restart(NULL);
-}
-
-static unsigned long __init
-adir_find_end_of_memory(void)
-{
- return boot_mem_size;
-}
-
-static void __init
-adir_map_io(void)
-{
- io_block_mapping(ADIR_PCI32_VIRT_IO_BASE, ADIR_PCI32_IO_BASE,
- ADIR_PCI32_VIRT_IO_SIZE, _PAGE_IO);
- io_block_mapping(ADIR_PCI64_VIRT_IO_BASE, ADIR_PCI64_IO_BASE,
- ADIR_PCI64_VIRT_IO_SIZE, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- /*
- * On the Adirondack we use bi_recs and pass the pointer to them in R3.
- */
- parse_bootinfo((struct bi_record *) (r3 + KERNELBASE));
-
- /* Remember, isa_io_base is virtual but isa_mem_base is physical! */
- isa_io_base = ADIR_PCI32_VIRT_IO_BASE;
- isa_mem_base = ADIR_PCI32_MEM_BASE;
- pci_dram_offset = ADIR_PCI_SYS_MEM_BASE;
-
- ppc_md.setup_arch = adir_setup_arch;
- ppc_md.show_cpuinfo = adir_show_cpuinfo;
- ppc_md.irq_canonicalize = NULL;
- ppc_md.init_IRQ = adir_init_IRQ;
- ppc_md.get_irq = adir_get_irq;
- ppc_md.init = NULL;
-
- ppc_md.find_end_of_memory = adir_find_end_of_memory;
- ppc_md.setup_io_mappings = adir_map_io;
-
- ppc_md.restart = adir_restart;
- ppc_md.power_off = adir_power_off;
- ppc_md.halt = adir_halt;
-
- ppc_md.time_init = todc_time_init;
- ppc_md.set_rtc_time = todc_set_rtc_time;
- ppc_md.get_rtc_time = todc_get_rtc_time;
- ppc_md.nvram_read_val = todc_mc146818_read_val;
- ppc_md.nvram_write_val = todc_mc146818_write_val;
- ppc_md.calibrate_decr = adir_calibrate_decr;
-}
obj-$(CONFIG_POWER4) += open_pic2.o
obj-$(CONFIG_PPC_CHRP) += open_pic.o indirect_pci.o i8259.o
obj-$(CONFIG_PPC_PREP) += open_pic.o indirect_pci.o i8259.o todc_time.o
-obj-$(CONFIG_ADIR) += i8259.o indirect_pci.o pci_auto.o \
- todc_time.o
obj-$(CONFIG_BAMBOO) += indirect_pci.o pci_auto.o todc_time.o
obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o
obj-$(CONFIG_EBONY) += indirect_pci.o pci_auto.o todc_time.o
projects / linux-2.6 / commitdiff