sata_sil: First step to removing ->post_set_mode

Now that we have ata_do_set_mode() available for drivers to use we don't
actually need ->post_set_mode() as the driver can wrap set_mode nicely
and do stuff before or after (eg PCMCIA needs before), so we can kill off
a method in all the structs

While I was at it I added kernel-doc to the function involved.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 170d36e6260f57cd1e9ed3b67c8bea36ada09ae6..466b05b671152079e48bc74e71157163799dadd1 100644 (file)
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "sata_sil"
-#define DRV_VERSION    "2.1"
+#define DRV_VERSION    "2.2"
 
 enum {
        SIL_MMIO_BAR            = 5,
@@ -117,7 +117,7 @@ static int sil_pci_device_resume(struct pci_dev *pdev);
 static void sil_dev_config(struct ata_device *dev);
 static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
-static void sil_post_set_mode (struct ata_port *ap);
+static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed);
 static irqreturn_t sil_interrupt(int irq, void *dev_instance);
 static void sil_freeze(struct ata_port *ap);
 static void sil_thaw(struct ata_port *ap);
@@ -197,7 +197,7 @@ static const struct ata_port_operations sil_ops = {
        .check_status           = ata_check_status,
        .exec_command           = ata_exec_command,
        .dev_select             = ata_std_dev_select,
-       .post_set_mode          = sil_post_set_mode,
+       .set_mode               = sil_set_mode,
        .bmdma_setup            = ata_bmdma_setup,
        .bmdma_start            = ata_bmdma_start,
        .bmdma_stop             = ata_bmdma_stop,
@@ -297,7 +297,16 @@ static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
        return cache_line;
 }
 
-static void sil_post_set_mode (struct ata_port *ap)
+/**
+ *     sil_set_mode            -       wrap set_mode functions
+ *     @ap: port to set up
+ *     @r_failed: returned device when we fail
+ *
+ *     Wrap the libata method for device setup as after the setup we need
+ *     to inspect the results and do some configuration work
+ */
+
+static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed)
 {
        struct ata_host *host = ap->host;
        struct ata_device *dev;
@@ -305,6 +314,11 @@ static void sil_post_set_mode (struct ata_port *ap)
        void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode;
        u32 tmp, dev_mode[2];
        unsigned int i;
+       int rc;
+       
+       rc = ata_do_set_mode(ap, r_failed);
+       if (rc)
+               return rc;
 
        for (i = 0; i < 2; i++) {
                dev = &ap->device[i];
@@ -323,6 +337,7 @@ static void sil_post_set_mode (struct ata_port *ap)
        tmp |= (dev_mode[1] << 4);
        writel(tmp, addr);
        readl(addr);    /* flush */
+       return 0;
 }
 
 static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)