#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
#include <asm/unistd.h>
+#include <asm/cpu/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
! NOTE:
! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
call_dpf:
mov.l 1f, r0
- mov r5, r8
- mov.l @r0, r6
- mov r6, r9
- mov.l 2f, r0
- sts pr, r10
- jsr @r0
- mov r15, r4
- !
- tst r0, r0
- bf/s 0f
- lds r10, pr
- rts
- nop
-0: sti
+ mov.l @r0, r6 ! address
mov.l 3f, r0
- mov r9, r6
- mov r8, r5
+ sti
jmp @r0
- mov r15, r4
+ mov r15, r4 ! regs
.align 2
1: .long MMU_TEA
-2: .long __do_page_fault
3: .long do_page_fault
.align 2
2: .long ret_from_exception
!
!
+
+/* This code makes some assumptions to improve performance.
+ * Make sure they are stil true. */
+#if PTRS_PER_PGD != PTRS_PER_PTE
+#error PDG and PTE sizes don't match
+#endif
+
+/* gas doesn't flag impossible values for mov #immediate as an error */
+#if (_PAGE_PRESENT >> 2) > 0x7f
+#error cannot load PAGE_PRESENT as an immediate
+#endif
+#if _PAGE_DIRTY > 0x7f
+#error cannot load PAGE_DIRTY as an immediate
+#endif
+#if (_PAGE_PRESENT << 2) != _PAGE_ACCESSED
+#error cannot derive PAGE_ACCESSED from PAGE_PRESENT
+#endif
+
+#if defined(CONFIG_CPU_SH4)
+#define ldmmupteh(r) mov.l 8f, r
+#else
+#define ldmmupteh(r) mov #MMU_PTEH, r
+#endif
+
.balign 1024,0,1024
tlb_miss:
- mov.l 1f, k2
+#ifdef COUNT_EXCEPTIONS
+ ! Increment the counts
+ mov.l 9f, k1
+ mov.l @k1, k2
+ add #1, k2
+ mov.l k2, @k1
+#endif
+
+ ! k0 scratch
+ ! k1 pgd and pte pointers
+ ! k2 faulting address
+ ! k3 pgd and pte index masks
+ ! k4 shift
+
+ ! Load up the pgd entry (k1)
+
+ ldmmupteh(k0) ! 9 LS (latency=2) MMU_PTEH
+
+ mov.w 4f, k3 ! 8 LS (latency=2) (PTRS_PER_PGD-1) << 2
+ mov #-(PGDIR_SHIFT-2), k4 ! 6 EX
+
+ mov.l @(MMU_TEA-MMU_PTEH,k0), k2 ! 18 LS (latency=2)
+
+ mov.l @(MMU_TTB-MMU_PTEH,k0), k1 ! 18 LS (latency=2)
+
+ mov k2, k0 ! 5 MT (latency=0)
+ shld k4, k0 ! 99 EX
+
+ and k3, k0 ! 78 EX
+
+ mov.l @(k0, k1), k1 ! 21 LS (latency=2)
+ mov #-(PAGE_SHIFT-2), k4 ! 6 EX
+
+ ! Load up the pte entry (k2)
+
+ mov k2, k0 ! 5 MT (latency=0)
+ shld k4, k0 ! 99 EX
+
+ tst k1, k1 ! 86 MT
+
+ bt 20f ! 110 BR
+
+ and k3, k0 ! 78 EX
+ mov.w 5f, k4 ! 8 LS (latency=2) _PAGE_PRESENT
+
+ mov.l @(k0, k1), k2 ! 21 LS (latency=2)
+ add k0, k1 ! 49 EX
+
+#ifdef CONFIG_CPU_HAS_PTEA
+ ! Test the entry for present and _PAGE_ACCESSED
+
+ mov #-28, k3 ! 6 EX
+ mov k2, k0 ! 5 MT (latency=0)
+
+ tst k4, k2 ! 68 MT
+ shld k3, k0 ! 99 EX
+
+ bt 20f ! 110 BR
+
+ ! Set PTEA register
+ ! MMU_PTEA = ((pteval >> 28) & 0xe) | (pteval & 0x1)
+ !
+ ! k0=pte>>28, k1=pte*, k2=pte, k3=<unused>, k4=_PAGE_PRESENT
+
+ and #0xe, k0 ! 79 EX
+
+ mov k0, k3 ! 5 MT (latency=0)
+ mov k2, k0 ! 5 MT (latency=0)
+
+ and #1, k0 ! 79 EX
+
+ or k0, k3 ! 82 EX
+
+ ldmmupteh(k0) ! 9 LS (latency=2)
+ shll2 k4 ! 101 EX _PAGE_ACCESSED
+
+ tst k4, k2 ! 68 MT
+
+ mov.l k3, @(MMU_PTEA-MMU_PTEH,k0) ! 27 LS
+
+ mov.l 7f, k3 ! 9 LS (latency=2) _PAGE_FLAGS_HARDWARE_MASK
+
+ ! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED
+#else
+
+ ! Test the entry for present and _PAGE_ACCESSED
+
+ mov.l 7f, k3 ! 9 LS (latency=2) _PAGE_FLAGS_HARDWARE_MASK
+ tst k4, k2 ! 68 MT
+
+ shll2 k4 ! 101 EX _PAGE_ACCESSED
+ ldmmupteh(k0) ! 9 LS (latency=2)
+
+ bt 20f ! 110 BR
+ tst k4, k2 ! 68 MT
+
+ ! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED
+
+#endif
+
+ ! Set up the entry
+
+ and k2, k3 ! 78 EX
+ bt/s 10f ! 108 BR
+
+ mov.l k3, @(MMU_PTEL-MMU_PTEH,k0) ! 27 LS
+
+ ldtlb ! 128 CO
+
+ ! At least one instruction between ldtlb and rte
+ nop ! 119 NOP
+
+ rte ! 126 CO
+
+ nop ! 119 NOP
+
+
+10: or k4, k2 ! 82 EX
+
+ ldtlb ! 128 CO
+
+ ! At least one instruction between ldtlb and rte
+ mov.l k2, @k1 ! 27 LS
+
+ rte ! 126 CO
+
+ ! Note we cannot execute mov here, because it is executed after
+ ! restoring SSR, so would be executed in user space.
+ nop ! 119 NOP
+
+
+ .align 5
+ ! Once cache line if possible...
+1: .long swapper_pg_dir
+4: .short (PTRS_PER_PGD-1) << 2
+5: .short _PAGE_PRESENT
+7: .long _PAGE_FLAGS_HARDWARE_MASK
+8: .long MMU_PTEH
+#ifdef COUNT_EXCEPTIONS
+9: .long exception_count_miss
+#endif
+
+ ! Either pgd or pte not present
+20: mov.l 1f, k2
mov.l 4f, k3
bra handle_exception
mov.l @k2, k2
bf interrupt_exception
shlr2 r8
shlr r8
+
+#ifdef COUNT_EXCEPTIONS
+ mov.l 5f, r9
+ add r8, r9
+ mov.l @r9, r10
+ add #1, r10
+ mov.l r10, @r9
+#endif
+
mov.l 4f, r9
add r8, r9
mov.l @r9, r9
2: .long 0x000080f0 ! FD=1, IMASK=15
3: .long 0xcfffffff ! RB=0, BL=0
4: .long exception_handling_table
+#ifdef COUNT_EXCEPTIONS
+5: .long exception_count_table
+#endif
interrupt_exception:
mov.l 1f, r9
case 0x205:
cpu_data->type = CPU_SH7750;
cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
- CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA;
+ CPU_HAS_PERF_COUNTER;
break;
case 0x206:
cpu_data->type = CPU_SH7750S;
cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
- CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA;
+ CPU_HAS_PERF_COUNTER;
break;
case 0x1100:
cpu_data->type = CPU_SH7751;
- cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
+ cpu_data->flags |= CPU_HAS_FPU;
break;
case 0x2000:
cpu_data->type = CPU_SH73180;
break;
case 0x8000:
cpu_data->type = CPU_ST40RA;
- cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
+ cpu_data->flags |= CPU_HAS_FPU;
break;
case 0x8100:
cpu_data->type = CPU_ST40GX1;
- cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
+ cpu_data->flags |= CPU_HAS_FPU;
break;
case 0x700:
cpu_data->type = CPU_SH4_501;
cpu_data->icache.ways = 2;
cpu_data->dcache.ways = 2;
- cpu_data->flags |= CPU_HAS_PTEA;
break;
case 0x600:
cpu_data->type = CPU_SH4_202;
cpu_data->icache.ways = 2;
cpu_data->dcache.ways = 2;
- cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
+ cpu_data->flags |= CPU_HAS_FPU;
break;
case 0x500 ... 0x501:
switch (prr) {
cpu_data->icache.ways = 2;
cpu_data->dcache.ways = 2;
- cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
+ cpu_data->flags |= CPU_HAS_FPU;
break;
default:
cpu_data->dcache.ways = 1;
#endif
+#ifdef CONFIG_CPU_HAS_PTEA
+ cpu_data->flags |= CPU_HAS_PTEA;
+#endif
+
/*
* On anything that's not a direct-mapped cache, look to the CVR
* for I/D-cache specifics.
if (!user_mode(regs))
goto no_context;
}
-
-#ifdef CONFIG_SH_STORE_QUEUES
-/*
- * This is a special case for the SH-4 store queues, as pages for this
- * space still need to be faulted in before it's possible to flush the
- * store queue cache for writeout to the remapped region.
- */
-#define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000)
-#else
-#define P3_ADDR_MAX P4SEG
-#endif
-
-/*
- * Called with interrupts disabled.
- */
-asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
- unsigned long writeaccess,
- unsigned long address)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- pte_t entry;
- struct mm_struct *mm = current->mm;
- spinlock_t *ptl;
- int ret = 1;
-
-#ifdef CONFIG_SH_KGDB
- if (kgdb_nofault && kgdb_bus_err_hook)
- kgdb_bus_err_hook();
-#endif
-
- /*
- * We don't take page faults for P1, P2, and parts of P4, these
- * are always mapped, whether it be due to legacy behaviour in
- * 29-bit mode, or due to PMB configuration in 32-bit mode.
- */
- if (address >= P3SEG && address < P3_ADDR_MAX) {
- pgd = pgd_offset_k(address);
- mm = NULL;
- } else {
- if (unlikely(address >= TASK_SIZE || !mm))
- return 1;
-
- pgd = pgd_offset(mm, address);
- }
-
- pud = pud_offset(pgd, address);
- if (pud_none_or_clear_bad(pud))
- return 1;
- pmd = pmd_offset(pud, address);
- if (pmd_none_or_clear_bad(pmd))
- return 1;
-
- if (mm)
- pte = pte_offset_map_lock(mm, pmd, address, &ptl);
- else
- pte = pte_offset_kernel(pmd, address);
-
- entry = *pte;
- if (unlikely(pte_none(entry) || pte_not_present(entry)))
- goto unlock;
- if (unlikely(writeaccess && !pte_write(entry)))
- goto unlock;
-
- if (writeaccess)
- entry = pte_mkdirty(entry);
- entry = pte_mkyoung(entry);
-
-#ifdef CONFIG_CPU_SH4
- /*
- * ITLB is not affected by "ldtlb" instruction.
- * So, we need to flush the entry by ourselves.
- */
- __flush_tlb_page(get_asid(), address & PAGE_MASK);
-#endif
-
- set_pte(pte, entry);
- update_mmu_cache(NULL, address, entry);
- ret = 0;
-unlock:
- if (mm)
- pte_unmap_unlock(pte, ptl);
- return ret;
-}
projects / linux-2.6 / commitdiff