]> err.no Git - linux-2.6/commitdiff
V4L/DVB (5613): M920x: loosen up 80-col limit
authorAapo Tahkola <aet@rasterburn.org>
Fri, 20 Apr 2007 16:34:25 +0000 (13:34 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Wed, 9 May 2007 13:13:03 +0000 (10:13 -0300)
Do not follow 80-col limit where it would cause inconsistency.

Signed-off-by: Aapo Tahkola <aet@rasterburn.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/dvb/dvb-usb/m920x.c

index 49e57f85f99b7cf01c1afd672eff67465b33e0af..fbb735d93b7a68af6f7b612048ab482e50b22ea1 100644 (file)
@@ -85,12 +85,10 @@ static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
        int i, ret = 0;
        u8 rc_state[2];
 
-       if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE,
-                             rc_state, 1)) != 0)
+       if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE, rc_state, 1)) != 0)
                goto unlock;
 
-       if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY,
-                             rc_state + 1, 1)) != 0)
+       if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0)
                goto unlock;
 
        for (i = 0; i < d->props.rc_key_map_size; i++)
@@ -142,8 +140,7 @@ static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 }
 
 /* I2C */
-static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-                         int num)
+static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
 {
        struct dvb_usb_device *d = i2c_get_adapdata(adap);
        int i, j;
@@ -156,8 +153,7 @@ static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
                return -EAGAIN;
 
        for (i = 0; i < num; i++) {
-               if (msg[i].flags & (I2C_M_NO_RD_ACK | I2C_M_IGNORE_NAK |
-                                   I2C_M_TEN) || msg[i].len == 0) {
+               if (msg[i].flags & (I2C_M_NO_RD_ACK | I2C_M_IGNORE_NAK | I2C_M_TEN) || msg[i].len == 0) {
                        /* For a 0 byte message, I think sending the address
                         * to index 0x80|0x40 would be the correct thing to
                         * do.  However, zero byte messages are only used for
@@ -170,8 +166,7 @@ static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
                if (!(msg[i].flags & I2C_M_NOSTART)) {
                        if ((ret = m920x_write(d->udev, M9206_I2C,
                                        (msg[i].addr << 1) |
-                                       (msg[i].flags & I2C_M_RD ? 0x01 : 0),
-                                              0x80)) != 0)
+                                       (msg[i].flags & I2C_M_RD ? 0x01 : 0), 0x80)) != 0)
                                goto unlock;
                        /* Should check for ack here, if we knew how. */
                }
@@ -179,23 +174,19 @@ static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
                        for (j = 0; j < msg[i].len; j++) {
                                /* Last byte of transaction?
                                 * Send STOP, otherwise send ACK. */
-                               int stop = (i+1 == num && j+1 == msg[i].len)
-                                       ? 0x40 : 0x01;
+                               int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x01;
 
                                if ((ret = m920x_read(d->udev, M9206_I2C, 0x0,
-                                                     0x20|stop,
+                                                     0x20 | stop,
                                                      &msg[i].buf[j], 1)) != 0)
                                        goto unlock;
                        }
                } else {
                        for (j = 0; j < msg[i].len; j++) {
                                /* Last byte of transaction? Then send STOP. */
-                               int stop = (i+1 == num && j+1 == msg[i].len)
-                                       ? 0x40 : 0x00;
+                               int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x00;
 
-                               if ((ret = m920x_write(d->udev, M9206_I2C,
-                                                      msg[i].buf[j],
-                                                      stop)) != 0)
+                               if ((ret = m920x_write(d->udev, M9206_I2C, msg[i].buf[j], stop)) != 0)
                                        goto unlock;
                                /* Should check for ack here too. */
                        }
@@ -230,12 +221,10 @@ static int m920x_set_filter(struct dvb_usb_adapter *adap,
 
        pid |= 0x8000;
 
-       if ((ret = m920x_write(adap->dev->udev, M9206_FILTER, pid,
-                              (type << 8) | (idx * 4) )) != 0)
+       if ((ret = m920x_write(adap->dev->udev, M9206_FILTER, pid, (type << 8) | (idx * 4) )) != 0)
                return ret;
 
-       if ((ret = m920x_write(adap->dev->udev, M9206_FILTER, 0,
-                              (type << 8) | (idx * 4) )) != 0)
+       if ((ret = m920x_write(adap->dev->udev, M9206_FILTER, 0, (type << 8) | (idx * 4) )) != 0)
                return ret;
 
        return ret;
@@ -268,8 +257,7 @@ static int m920x_update_filters(struct dvb_usb_adapter *adap)
                        if (m->filters[i] == 0)
                                continue;
 
-                       if ((ret = m920x_set_filter(adap, 0x81, filter + 2,
-                                                   m->filters[i])) != 0)
+                       if ((ret = m920x_set_filter(adap, 0x81, filter + 2, m->filters[i])) != 0)
                                return ret;
 
                        filter++;
@@ -291,8 +279,7 @@ static int m920x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
        return m920x_update_filters(adap);
 }
 
-static int m920x_pid_filter(struct dvb_usb_adapter *adap,
-                           int index, u16 pid, int onoff)
+static int m920x_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
 {
        struct m920x_state *m = adap->dev->priv;
 
@@ -301,8 +288,7 @@ static int m920x_pid_filter(struct dvb_usb_adapter *adap,
        return m920x_update_filters(adap);
 }
 
-static int m920x_firmware_download(struct usb_device *udev,
-                                  const struct firmware *fw)
+static int m920x_firmware_download(struct usb_device *udev, const struct firmware *fw)
 {
        u16 value, index, size;
        u8 read[4], *buff;
@@ -334,9 +320,9 @@ static int m920x_firmware_download(struct usb_device *udev,
                                memcpy(buff, fw->data + i, size);
 
                                ret = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
-                                           M9206_FW,
-                                           USB_TYPE_VENDOR | USB_DIR_OUT,
-                                           value, index, buff, size, 20);
+                                                     M9206_FW,
+                                                     USB_TYPE_VENDOR | USB_DIR_OUT,
+                                                     value, index, buff, size, 20);
                                if (ret != size) {
                                        deb("error while uploading fw!\n");
                                        ret = -EIO;
@@ -445,7 +431,8 @@ static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap)
 {
        deb("%s\n",__FUNCTION__);
 
-       if ((adap->fe = dvb_attach(mt352_attach, &m920x_mt352_config,
+       if ((adap->fe = dvb_attach(mt352_attach,
+                                  &m920x_mt352_config,
                                   &adap->dev->i2c_adap)) == NULL)
                return -EIO;
 
@@ -480,8 +467,7 @@ static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
 {
        deb("%s\n",__FUNCTION__);
 
-       if (dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap,
-                      &m920x_qt1010_config) == NULL)
+       if (dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL)
                return -ENODEV;
 
        return 0;
@@ -491,8 +477,7 @@ static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap)
 {
        deb("%s\n",__FUNCTION__);
 
-       if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap,
-                      NULL) == NULL)
+       if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL)
                return -ENODEV;
 
        return 0;
@@ -502,8 +487,7 @@ static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap)
 {
        deb("%s\n",__FUNCTION__);
 
-       if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap,
-                      NULL) == NULL)
+       if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL)
                return -ENODEV;
 
        return 0;
@@ -593,8 +577,7 @@ static int m920x_probe(struct usb_interface *intf,
                        goto found;
                }
 
-               if ((ret = dvb_usb_device_init(intf,
-                                              &digivox_mini_ii_properties,
+               if ((ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties,
                                               THIS_MODULE, &d)) == 0) {
                        /* No remote control, so no rc_init_seq */
                        goto found;