firewire: prefix modules with firewire- instead of fw-

Of course everybody immediately associates "fw-" with FireWire, not
firmware or firewall or whatever.  But "firewire-" has a nice ring to
it too.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Kristian Hoegsberg <krh@bitplanet.net>

diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index 5932c72f9e424a1ad76a4c6f56f15e10709af855..396dade731f9177b6354f1bfd6edcc2bff5e0642 100644 (file)
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -18,7 +18,7 @@ config FIREWIRE
          your IEEE 1394 adapter.
 
          To compile this driver as a module, say M here: the module will be
-         called fw-core.
+         called firewire-core.
 
          This is the "JUJU" FireWire stack, an alternative implementation
          designed for robustness and simplicity.  You can build either this
@@ -34,11 +34,11 @@ config FIREWIRE_OHCI
          is the only chipset in use, so say Y here.
 
          To compile this driver as a module, say M here:  The module will be
-         called fw-ohci.
+         called firewire-ohci.
 
          If you also build ohci1394 of the classic IEEE 1394 driver stack,
-         blacklist either ohci1394 or fw-ohci to let hotplug load the desired
-         driver.
+         blacklist either ohci1394 or firewire-ohci to let hotplug load the
+         desired driver.
 
 config FIREWIRE_SBP2
        tristate "Support for storage devices (SBP-2 protocol driver)"
@@ -50,12 +50,12 @@ config FIREWIRE_SBP2
          like scanners.
 
          To compile this driver as a module, say M here:  The module will be
-         called fw-sbp2.
+         called firewire-sbp2.
 
          You should also enable support for disks, CD-ROMs, etc. in the SCSI
          configuration section.
 
          If you also build sbp2 of the classic IEEE 1394 driver stack,
-         blacklist either sbp2 or fw-sbp2 to let hotplug load the desired
-         driver.
+         blacklist either sbp2 or firewire-sbp2 to let hotplug load the
+         desired driver.
 

diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile
index fc7d59d4bce049946a331e726395cc5283ae312b..a7c31e9039c14c0912554ed981c1fa390ce7606d 100644 (file)
--- a/drivers/firewire/Makefile
+++ b/drivers/firewire/Makefile
@@ -2,9 +2,11 @@
 # Makefile for the Linux IEEE 1394 implementation
 #
 
-fw-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \
-       fw-device.o fw-cdev.o
+firewire-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \
+                   fw-device.o fw-cdev.o
+firewire-ohci-y += fw-ohci.o
+firewire-sbp2-y += fw-sbp2.o
 
-obj-$(CONFIG_FIREWIRE) += fw-core.o
-obj-$(CONFIG_FIREWIRE_OHCI) += fw-ohci.o
-obj-$(CONFIG_FIREWIRE_SBP2) += fw-sbp2.o
+obj-$(CONFIG_FIREWIRE) += firewire-core.o
+obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o
+obj-$(CONFIG_FIREWIRE_SBP2) += firewire-sbp2.o