]> err.no Git - linux-2.6/commitdiff
[PATCH] shpchp: Cleanup improper info messages
authorKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Fri, 12 May 2006 02:13:50 +0000 (11:13 +0900)
committerGreg Kroah-Hartman <gregkh@suse.de>
Mon, 19 Jun 2006 21:13:24 +0000 (14:13 -0700)
Current SHPCHP driver shows device number of slots in info messages,
but it is useless and should be replaced with slot name.

This patch replaces the device number shown in the info messages with
the slot name.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Cc: Kristen Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/pci/hotplug/shpchp.h
drivers/pci/hotplug/shpchp_ctrl.c

index b70fddbce93475c745e45080e6d160da2b4614bf..7208b95c6ee779585ff056bcdaeb091140f44961 100644 (file)
@@ -168,9 +168,9 @@ struct controller {
  * error Messages
  */
 #define msg_initialization_err "Initialization failure, error=%d\n"
-#define msg_button_on          "PCI slot #%d - powering on due to button press.\n"
-#define msg_button_off         "PCI slot #%d - powering off due to button press.\n"
-#define msg_button_cancel      "PCI slot #%d - action canceled due to button press.\n"
+#define msg_button_on          "PCI slot #%s - powering on due to button press.\n"
+#define msg_button_off         "PCI slot #%s - powering off due to button press.\n"
+#define msg_button_cancel      "PCI slot #%s - action canceled due to button press.\n"
 
 /* sysfs functions for the hotplug controller info */
 extern void shpchp_create_ctrl_files   (struct controller *ctrl);
index 4e6381481c5501a30d84ece1e4e3b98917496ea2..c39901dbff202ee46cb04096e639060088e017f9 100644 (file)
@@ -72,7 +72,7 @@ u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id)
        /*
         *  Button pressed - See if need to TAKE ACTION!!!
         */
-       info("Button pressed on Slot(%d)\n", ctrl->first_slot + hp_slot);
+       info("Button pressed on Slot(%s)\n", p_slot->name);
        event_type = INT_BUTTON_PRESS;
 
        queue_interrupt_event(p_slot, event_type);
@@ -101,7 +101,7 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
                /*
                 * Switch opened
                 */
-               info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
+               info("Latch open on Slot(%s)\n", p_slot->name);
                event_type = INT_SWITCH_OPEN;
                if (p_slot->pwr_save && p_slot->presence_save) {
                        event_type = INT_POWER_FAULT;
@@ -111,7 +111,7 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
                /*
                 *  Switch closed
                 */
-               info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot);
+               info("Latch close on Slot(%s)\n", p_slot->name);
                event_type = INT_SWITCH_CLOSE;
        }
 
@@ -139,13 +139,13 @@ u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id)
                /*
                 * Card Present
                 */
-               info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot);
+               info("Card present on Slot(%s)\n", p_slot->name);
                event_type = INT_PRESENCE_ON;
        } else {
                /*
                 * Not Present
                 */
-               info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot);
+               info("Card not present on Slot(%s)\n", p_slot->name);
                event_type = INT_PRESENCE_OFF;
        }
 
@@ -169,14 +169,14 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
                /*
                 * Power fault Cleared
                 */
-               info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
+               info("Power fault cleared on Slot(%s)\n", p_slot->name);
                p_slot->status = 0x00;
                event_type = INT_POWER_FAULT_CLEAR;
        } else {
                /*
                 *   Power fault
                 */
-               info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
+               info("Power fault on Slot(%s)\n", p_slot->name);
                event_type = INT_POWER_FAULT;
                /* set power fault status for this board */
                p_slot->status = 0xFF;
@@ -496,10 +496,10 @@ static void handle_button_press_event(struct slot *p_slot)
                p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
                if (getstatus) {
                        p_slot->state = BLINKINGOFF_STATE;
-                       info(msg_button_off, p_slot->number);
+                       info(msg_button_off, p_slot->name);
                } else {
                        p_slot->state = BLINKINGON_STATE;
-                       info(msg_button_on, p_slot->number);
+                       info(msg_button_on, p_slot->name);
                }
                /* blink green LED and turn off amber */
                p_slot->hpc_ops->green_led_blink(p_slot);
@@ -522,7 +522,7 @@ static void handle_button_press_event(struct slot *p_slot)
                else
                        p_slot->hpc_ops->green_led_off(p_slot);
                p_slot->hpc_ops->set_attention_status(p_slot, 0);
-               info(msg_button_cancel, p_slot->number);
+               info(msg_button_cancel, p_slot->name);
                p_slot->state = STATIC_STATE;
                break;
        case POWEROFF_STATE:
@@ -575,17 +575,17 @@ static int shpchp_enable_slot (struct slot *p_slot)
        mutex_lock(&p_slot->ctrl->crit_sect);
        rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
        if (rc || !getstatus) {
-               info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
+               info("No adapter on slot(%s)\n", p_slot->name);
                goto out;
        }
        rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
        if (rc || getstatus) {
-               info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
+               info("Latch open on slot(%s)\n", p_slot->name);
                goto out;
        }
        rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
        if (rc || getstatus) {
-               info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
+               info("Already enabled on slot(%s)\n", p_slot->name);
                goto out;
        }
 
@@ -634,17 +634,17 @@ static int shpchp_disable_slot (struct slot *p_slot)
 
        rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
        if (rc || !getstatus) {
-               info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
+               info("No adapter on slot(%s)\n", p_slot->name);
                goto out;
        }
        rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
        if (rc || getstatus) {
-               info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
+               info("Latch open on slot(%s)\n", p_slot->name);
                goto out;
        }
        rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
        if (rc || !getstatus) {
-               info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
+               info("Already disabled slot(%s)\n", p_slot->name);
                goto out;
        }