#include "smsc-ircc2.h"
#include "smsc-sio.h"
+
+MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>");
+MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver");
+MODULE_LICENSE("GPL");
+
+
+static int ircc_dma = 255;
+module_param(ircc_dma, int, 0);
+MODULE_PARM_DESC(ircc_dma, "DMA channel");
+
+static int ircc_irq = 255;
+module_param(ircc_irq, int, 0);
+MODULE_PARM_DESC(ircc_irq, "IRQ line");
+
+static int ircc_fir;
+module_param(ircc_fir, int, 0);
+MODULE_PARM_DESC(ircc_fir, "FIR Base Address");
+
+static int ircc_sir;
+module_param(ircc_sir, int, 0);
+MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
+
+static int ircc_cfg;
+module_param(ircc_cfg, int, 0);
+MODULE_PARM_DESC(ircc_cfg, "Configuration register base address");
+
+static int ircc_transceiver;
+module_param(ircc_transceiver, int, 0);
+MODULE_PARM_DESC(ircc_transceiver, "Transceiver type");
+
/* Types */
struct smsc_transceiver {
#define DIM(x) (sizeof(x)/(sizeof(*(x))))
#define SMSC_IRCC2_C_IRDA_FALLBACK_SPEED 9600
#define SMSC_IRCC2_C_DEFAULT_TRANSCEIVER 1
-#define SMSC_IRCC2_C_NET_TIMEOUT 0
+#define SMSC_IRCC2_C_NET_TIMEOUT 0
#define SMSC_IRCC2_C_SIR_STOP 0
/* Prototypes */
/* Probing */
static int __init smsc_ircc_look_for_chips(void);
-static const smsc_chip_t * __init smsc_ircc_probe(unsigned short cfg_base,u8 reg,const smsc_chip_t *chip,char *type);
+static const smsc_chip_t * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const smsc_chip_t *chip, char *type);
static int __init smsc_superio_flat(const smsc_chip_t *chips, unsigned short cfg_base, char *type);
static int __init smsc_superio_paged(const smsc_chip_t *chips, unsigned short cfg_base, char *type);
static int __init smsc_superio_fdc(unsigned short cfg_base);
/* Transceivers for SMSC-ircc */
-static smsc_transceiver_t smsc_transceivers[]=
+static smsc_transceiver_t smsc_transceivers[] =
{
- { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800},
- { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select},
- { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc},
- { NULL, NULL}
+ { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800 },
+ { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select },
+ { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc },
+ { NULL, NULL }
};
#define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (DIM(smsc_transceivers)-1)
#define FIR 4 /* SuperIO Chip has fast IRDA */
#define SERx4 8 /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */
-static smsc_chip_t __initdata fdc_chips_flat[]=
+static smsc_chip_t __initdata fdc_chips_flat[] =
{
/* Base address 0x3f0 or 0x370 */
{ "37C44", KEY55_1|NoIRDA, 0x00, 0x00 }, /* This chip cannot be detected */
{ NULL }
};
-static smsc_chip_t __initdata fdc_chips_paged[]=
+static smsc_chip_t __initdata fdc_chips_paged[] =
{
/* Base address 0x3f0 or 0x370 */
{ "37B72X", KEY55_1|SIR|SERx4, 0x4c, 0x00 },
{ NULL }
};
-static smsc_chip_t __initdata lpc_chips_flat[]=
+static smsc_chip_t __initdata lpc_chips_flat[] =
{
/* Base address 0x2E or 0x4E */
{ "47N227", KEY55_1|FIR|SERx4, 0x5a, 0x00 },
{ NULL }
};
-static smsc_chip_t __initdata lpc_chips_paged[]=
+static smsc_chip_t __initdata lpc_chips_paged[] =
{
/* Base address 0x2E or 0x4E */
{ "47B27X", KEY55_1|SIR|SERx4, 0x51, 0x00 },
#define SMSCSIO_TYPE_FLAT 4
#define SMSCSIO_TYPE_PAGED 8
-static smsc_chip_address_t __initdata possible_addresses[]=
+static smsc_chip_address_t __initdata possible_addresses[] =
{
- {0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED},
- {0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED},
- {0xe0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED},
- {0x2e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED},
- {0x4e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED},
- {0,0}
+ { 0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
+ { 0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
+ { 0xe0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
+ { 0x2e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
+ { 0x4e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
+ { 0, 0 }
};
/* Globals */
-static struct smsc_ircc_cb *dev_self[] = { NULL, NULL};
-
-static int ircc_irq=255;
-static int ircc_dma=255;
-static int ircc_fir=0;
-static int ircc_sir=0;
-static int ircc_cfg=0;
-static int ircc_transceiver=0;
-
-static unsigned short dev_count=0;
+static struct smsc_ircc_cb *dev_self[] = { NULL, NULL };
+static unsigned short dev_count;
static inline void register_bank(int iobase, int bank)
{
- outb(((inb(iobase+IRCC_MASTER) & 0xf0) | (bank & 0x07)),
- iobase+IRCC_MASTER);
+ outb(((inb(iobase + IRCC_MASTER) & 0xf0) | (bank & 0x07)),
+ iobase + IRCC_MASTER);
}
*/
static int __init smsc_ircc_init(void)
{
- int ret=-ENODEV;
+ int ret = -ENODEV;
IRDA_DEBUG(1, "%s\n", __FUNCTION__);
- dev_count=0;
+ dev_count = 0;
- if ((ircc_fir>0)&&(ircc_sir>0)) {
+ if (ircc_fir > 0 && ircc_sir > 0) {
IRDA_MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir);
IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir);
}
/* try user provided configuration register base address */
- if (ircc_cfg>0) {
+ if (ircc_cfg > 0) {
IRDA_MESSAGE(" Overriding configuration address 0x%04x\n",
ircc_cfg);
if (!smsc_superio_fdc(ircc_cfg))
ret = 0;
}
- if(smsc_ircc_look_for_chips()>0) ret = 0;
+ if (smsc_ircc_look_for_chips() > 0)
+ ret = 0;
return ret;
}
IRDA_DEBUG(1, "%s\n", __FUNCTION__);
err = smsc_ircc_present(fir_base, sir_base);
- if(err)
+ if (err)
goto err_out;
err = -ENOMEM;
dev->hard_start_xmit = smsc_ircc_hard_xmit_sir;
#if SMSC_IRCC2_C_NET_TIMEOUT
dev->tx_timeout = smsc_ircc_timeout;
- dev->watchdog_timeo = HZ*2; /* Allow enough time for speed change */
+ dev->watchdog_timeo = HZ * 2; /* Allow enough time for speed change */
#endif
dev->open = smsc_ircc_net_open;
dev->stop = smsc_ircc_net_close;
self->rx_buff.data = self->rx_buff.head;
smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq);
-
smsc_ircc_setup_qos(self);
-
smsc_ircc_init_chip(self);
- if(ircc_transceiver > 0 &&
- ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS)
+ if (ircc_transceiver > 0 &&
+ ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS)
self->transceiver = ircc_transceiver;
else
smsc_ircc_probe_transceiver(self);
err = register_netdev(self->netdev);
- if(err) {
+ if (err) {
IRDA_ERROR("%s, Network device registration failed!\n",
driver_name);
goto err_out4;
IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
return 0;
+
err_out4:
dma_free_coherent(NULL, self->tx_buff.truesize,
self->tx_buff.head, self->tx_buff_dma);
register_bank(fir_base, 3);
- high = inb(fir_base+IRCC_ID_HIGH);
- low = inb(fir_base+IRCC_ID_LOW);
- chip = inb(fir_base+IRCC_CHIP_ID);
- version = inb(fir_base+IRCC_VERSION);
- config = inb(fir_base+IRCC_INTERFACE);
+ high = inb(fir_base + IRCC_ID_HIGH);
+ low = inb(fir_base + IRCC_ID_LOW);
+ chip = inb(fir_base + IRCC_CHIP_ID);
+ version = inb(fir_base + IRCC_VERSION);
+ config = inb(fir_base + IRCC_INTERFACE);
dma = config & IRCC_INTERFACE_DMA_MASK;
irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) {
- IRDA_WARNING("%s(), addr 0x%04x - no device found!\n",
+ IRDA_WARNING("%s(), addr 0x%04x - no device found!\n",
__FUNCTION__, fir_base);
goto out3;
}
chip & 0x0f, version, fir_base, sir_base, dma, irq);
return 0;
+
out3:
release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
out2:
unsigned char config, chip_dma, chip_irq;
register_bank(fir_base, 3);
- config = inb(fir_base+IRCC_INTERFACE);
- chip_dma = config & IRCC_INTERFACE_DMA_MASK;
- chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
+ config = inb(fir_base + IRCC_INTERFACE);
+ chip_dma = config & IRCC_INTERFACE_DMA_MASK;
+ chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
self->io.fir_base = fir_base;
self->io.sir_base = sir_base;
IRDA_MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n",
driver_name, chip_irq, irq);
self->io.irq = irq;
- }
- else
+ } else
self->io.irq = chip_irq;
if (dma < 255) {
IRDA_MESSAGE("%s, Overriding DMA - chip says %d, using %d\n",
driver_name, chip_dma, dma);
self->io.dma = dma;
- }
- else
+ } else
self->io.dma = chip_dma;
}
{
int iobase, ir_mode, ctrl, fast;
- IRDA_ASSERT( self != NULL, return; );
- iobase = self->io.fir_base;
+ IRDA_ASSERT(self != NULL, return;);
+ iobase = self->io.fir_base;
ir_mode = IRCC_CFGA_IRDA_SIR_A;
ctrl = 0;
fast = 0;
register_bank(iobase, 0);
- outb(IRCC_MASTER_RESET, iobase+IRCC_MASTER);
- outb(0x00, iobase+IRCC_MASTER);
+ outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
+ outb(0x00, iobase + IRCC_MASTER);
register_bank(iobase, 1);
- outb(((inb(iobase+IRCC_SCE_CFGA) & 0x87) | ir_mode),
- iobase+IRCC_SCE_CFGA);
+ outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | ir_mode),
+ iobase + IRCC_SCE_CFGA);
#ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */
- outb(((inb(iobase+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
- iobase+IRCC_SCE_CFGB);
+ outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
+ iobase + IRCC_SCE_CFGB);
#else
- outb(((inb(iobase+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
- iobase+IRCC_SCE_CFGB);
+ outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
+ iobase + IRCC_SCE_CFGB);
#endif
- (void) inb(iobase+IRCC_FIFO_THRESHOLD);
- outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase+IRCC_FIFO_THRESHOLD);
+ (void) inb(iobase + IRCC_FIFO_THRESHOLD);
+ outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase + IRCC_FIFO_THRESHOLD);
register_bank(iobase, 4);
- outb((inb(iobase+IRCC_CONTROL) & 0x30) | ctrl, iobase+IRCC_CONTROL);
+ outb((inb(iobase + IRCC_CONTROL) & 0x30) | ctrl, iobase + IRCC_CONTROL);
register_bank(iobase, 0);
- outb(fast, iobase+IRCC_LCR_A);
+ outb(fast, iobase + IRCC_LCR_A);
smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
/* Power on device */
- outb(0x00, iobase+IRCC_MASTER);
+ outb(0x00, iobase + IRCC_MASTER);
}
/*
/* Check if we need to change the speed */
speed = irda_get_next_speed(skb);
- if ((speed != self->io.speed) && (speed != -1)) {
+ if (speed != self->io.speed && speed != -1) {
/* Check for empty frame */
if (!skb->len) {
/*
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
return 0;
- } else {
- self->new_speed = speed;
}
+ self->new_speed = speed;
}
/* Init tx buffer */
self->stats.tx_bytes += self->tx_buff.len;
/* Turn on transmit finished interrupt. Will fire immediately! */
- outb(UART_IER_THRI, iobase+UART_IER);
+ outb(UART_IER_THRI, iobase + UART_IER);
spin_unlock_irqrestore(&self->lock, flags);
self->io.speed = speed;
- switch(speed) {
+ switch (speed) {
default:
case 576000:
ir_mode = IRCC_CFGA_IRDA_HDLC;
Now in tranceiver!
/* This causes an interrupt */
register_bank(fir_base, 0);
- outb((inb(fir_base+IRCC_LCR_A) & 0xbf) | fast, fir_base+IRCC_LCR_A);
+ outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast, fir_base + IRCC_LCR_A);
#endif
register_bank(fir_base, 1);
- outb(((inb(fir_base+IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base+IRCC_SCE_CFGA);
+ outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base + IRCC_SCE_CFGA);
register_bank(fir_base, 4);
- outb((inb(fir_base+IRCC_CONTROL) & 0x30) | ctrl, fir_base+IRCC_CONTROL);
+ outb((inb(fir_base + IRCC_CONTROL) & 0x30) | ctrl, fir_base + IRCC_CONTROL);
}
/*
dev->hard_start_xmit = smsc_ircc_hard_xmit_fir;
/* Clear FIFO */
- outb(inb(fir_base+IRCC_LCR_A)|IRCC_LCR_A_FIFO_RESET, fir_base+IRCC_LCR_A);
+ outb(inb(fir_base + IRCC_LCR_A) | IRCC_LCR_A_FIFO_RESET, fir_base + IRCC_LCR_A);
/* Enable interrupt */
- /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base+IRCC_IER);*/
+ /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base + IRCC_IER);*/
register_bank(fir_base, 1);
/* Select the TX/RX interface */
#ifdef SMSC_669 /* Uses pin 88/89 for Rx/Tx */
- outb(((inb(fir_base+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
- fir_base+IRCC_SCE_CFGB);
+ outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
+ fir_base + IRCC_SCE_CFGB);
#else
- outb(((inb(fir_base+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
- fir_base+IRCC_SCE_CFGB);
+ outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
+ fir_base + IRCC_SCE_CFGB);
#endif
- (void) inb(fir_base+IRCC_FIFO_THRESHOLD);
+ (void) inb(fir_base + IRCC_FIFO_THRESHOLD);
/* Enable SCE interrupts */
- outb(0, fir_base+IRCC_MASTER);
+ outb(0, fir_base + IRCC_MASTER);
register_bank(fir_base, 0);
- outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base+IRCC_IER);
- outb(IRCC_MASTER_INT_EN, fir_base+IRCC_MASTER);
+ outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, fir_base + IRCC_IER);
+ outb(IRCC_MASTER_INT_EN, fir_base + IRCC_MASTER);
}
/*
fir_base = self->io.fir_base;
register_bank(fir_base, 0);
- /*outb(IRCC_MASTER_RESET, fir_base+IRCC_MASTER);*/
- outb(inb(fir_base+IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base+IRCC_LCR_B);
+ /*outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);*/
+ outb(inb(fir_base + IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base + IRCC_LCR_B);
}
smsc_ircc_fir_start(self);
#endif
- if(self->io.speed == 0)
+ if (self->io.speed == 0)
smsc_ircc_sir_start(self);
#if 0
- if(!last_speed_was_sir) speed = self->io.speed;
+ if (!last_speed_was_sir) speed = self->io.speed;
#endif
- if(self->io.speed != speed) smsc_ircc_set_transceiver_for_speed(self, speed);
+ if (self->io.speed != speed)
+ smsc_ircc_set_transceiver_for_speed(self, speed);
self->io.speed = speed;
- if(speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
- if(!last_speed_was_sir) {
+ if (speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
+ if (!last_speed_was_sir) {
smsc_ircc_fir_stop(self);
smsc_ircc_sir_start(self);
}
smsc_ircc_set_sir_speed(self, speed);
- }
- else {
- if(last_speed_was_sir) {
+ } else {
+ if (last_speed_was_sir) {
#if SMSC_IRCC2_C_SIR_STOP
smsc_ircc_sir_stop(self);
#endif
self->io.speed = speed;
/* Turn off interrupts */
- outb(0, iobase+UART_IER);
+ outb(0, iobase + UART_IER);
- divisor = SMSC_IRCC2_MAX_SIR_SPEED/speed;
+ divisor = SMSC_IRCC2_MAX_SIR_SPEED / speed;
fcr = UART_FCR_ENABLE_FIFO;
* almost 1,7 ms at 19200 bps. At speeds above that we can just forget
* about this timeout since it will always be fast enough.
*/
- if (self->io.speed < 38400)
- fcr |= UART_FCR_TRIGGER_1;
- else
- fcr |= UART_FCR_TRIGGER_14;
+ fcr |= self->io.speed < 38400 ?
+ UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
/* IrDA ports use 8N1 */
lcr = UART_LCR_WLEN8;
- outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */
- outb(divisor & 0xff, iobase+UART_DLL); /* Set speed */
- outb(divisor >> 8, iobase+UART_DLM);
- outb(lcr, iobase+UART_LCR); /* Set 8N1 */
- outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
+ outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */
+ outb(divisor & 0xff, iobase + UART_DLL); /* Set speed */
+ outb(divisor >> 8, iobase + UART_DLM);
+ outb(lcr, iobase + UART_LCR); /* Set 8N1 */
+ outb(fcr, iobase + UART_FCR); /* Enable FIFO's */
/* Turn on interrups */
- outb(UART_IER_RLSI|UART_IER_RDI|UART_IER_THRI, iobase+UART_IER);
+ outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
}
/* Check if we need to change the speed after this frame */
speed = irda_get_next_speed(skb);
- if ((speed != self->io.speed) && (speed != -1)) {
+ if (speed != self->io.speed && speed != -1) {
/* Check for empty frame */
if (!skb->len) {
/* Note : you should make sure that speed changes
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
return 0;
- } else
- self->new_speed = speed;
+ }
+
+ self->new_speed = speed;
}
memcpy(self->tx_buff.head, skb->data, skb->len);
/* Transmit frame */
smsc_ircc_dma_xmit(self, iobase, 0);
}
+
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
#if 1
/* Disable Rx */
register_bank(iobase, 0);
- outb(0x00, iobase+IRCC_LCR_B);
+ outb(0x00, iobase + IRCC_LCR_B);
#endif
register_bank(iobase, 1);
- outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
- iobase+IRCC_SCE_CFGB);
+ outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
+ iobase + IRCC_SCE_CFGB);
self->io.direction = IO_XMIT;
/* Set BOF additional count for generating the min turn time */
register_bank(iobase, 4);
- outb(bofs & 0xff, iobase+IRCC_BOF_COUNT_LO);
- ctrl = inb(iobase+IRCC_CONTROL) & 0xf0;
- outb(ctrl | ((bofs >> 8) & 0x0f), iobase+IRCC_BOF_COUNT_HI);
+ outb(bofs & 0xff, iobase + IRCC_BOF_COUNT_LO);
+ ctrl = inb(iobase + IRCC_CONTROL) & 0xf0;
+ outb(ctrl | ((bofs >> 8) & 0x0f), iobase + IRCC_BOF_COUNT_HI);
/* Set max Tx frame size */
- outb(self->tx_buff.len >> 8, iobase+IRCC_TX_SIZE_HI);
- outb(self->tx_buff.len & 0xff, iobase+IRCC_TX_SIZE_LO);
+ outb(self->tx_buff.len >> 8, iobase + IRCC_TX_SIZE_HI);
+ outb(self->tx_buff.len & 0xff, iobase + IRCC_TX_SIZE_LO);
/*outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR);*/
/* Enable burst mode chip Tx DMA */
register_bank(iobase, 1);
- outb(inb(iobase+IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
- IRCC_CFGB_DMA_BURST, iobase+IRCC_SCE_CFGB);
+ outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
+ IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
/* Setup DMA controller (must be done after enabling chip DMA) */
irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
/* Enable interrupt */
register_bank(iobase, 0);
- outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase+IRCC_IER);
- outb(IRCC_MASTER_INT_EN, iobase+IRCC_MASTER);
+ outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
+ outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
/* Enable transmit */
- outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase+IRCC_LCR_B);
+ outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase + IRCC_LCR_B);
}
/*
#if 0
/* Disable Tx */
register_bank(iobase, 0);
- outb(0x00, iobase+IRCC_LCR_B);
+ outb(0x00, iobase + IRCC_LCR_B);
#endif
register_bank(self->io.fir_base, 1);
- outb(inb(self->io.fir_base+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
- self->io.fir_base+IRCC_SCE_CFGB);
+ outb(inb(self->io.fir_base + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
+ self->io.fir_base + IRCC_SCE_CFGB);
/* Check for underrun! */
register_bank(iobase, 0);
- if (inb(iobase+IRCC_LSR) & IRCC_LSR_UNDERRUN) {
+ if (inb(iobase + IRCC_LSR) & IRCC_LSR_UNDERRUN) {
self->stats.tx_errors++;
self->stats.tx_fifo_errors++;
/* Reset error condition */
register_bank(iobase, 0);
- outb(IRCC_MASTER_ERROR_RESET, iobase+IRCC_MASTER);
- outb(0x00, iobase+IRCC_MASTER);
+ outb(IRCC_MASTER_ERROR_RESET, iobase + IRCC_MASTER);
+ outb(0x00, iobase + IRCC_MASTER);
} else {
self->stats.tx_packets++;
- self->stats.tx_bytes += self->tx_buff.len;
+ self->stats.tx_bytes += self->tx_buff.len;
}
/* Check if it's time to change the speed */
#if 0
/* Turn off chip DMA */
register_bank(iobase, 1);
- outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
- iobase+IRCC_SCE_CFGB);
+ outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
+ iobase + IRCC_SCE_CFGB);
#endif
/* Disable Tx */
register_bank(iobase, 0);
- outb(0x00, iobase+IRCC_LCR_B);
+ outb(0x00, iobase + IRCC_LCR_B);
/* Turn off chip DMA */
register_bank(iobase, 1);
- outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
- iobase+IRCC_SCE_CFGB);
+ outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
+ iobase + IRCC_SCE_CFGB);
self->io.direction = IO_RECV;
self->rx_buff.data = self->rx_buff.head;
/* Set max Rx frame size */
register_bank(iobase, 4);
- outb((2050 >> 8) & 0x0f, iobase+IRCC_RX_SIZE_HI);
- outb(2050 & 0xff, iobase+IRCC_RX_SIZE_LO);
+ outb((2050 >> 8) & 0x0f, iobase + IRCC_RX_SIZE_HI);
+ outb(2050 & 0xff, iobase + IRCC_RX_SIZE_LO);
/* Setup DMA controller */
irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
/* Enable burst mode chip Rx DMA */
register_bank(iobase, 1);
- outb(inb(iobase+IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
- IRCC_CFGB_DMA_BURST, iobase+IRCC_SCE_CFGB);
+ outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
+ IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
/* Enable interrupt */
register_bank(iobase, 0);
- outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase+IRCC_IER);
- outb(IRCC_MASTER_INT_EN, iobase+IRCC_MASTER);
-
+ outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
+ outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
/* Enable receiver */
register_bank(iobase, 0);
outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE,
- iobase+IRCC_LCR_B);
+ iobase + IRCC_LCR_B);
return 0;
}
#if 0
/* Disable Rx */
register_bank(iobase, 0);
- outb(0x00, iobase+IRCC_LCR_B);
+ outb(0x00, iobase + IRCC_LCR_B);
#endif
register_bank(iobase, 0);
- outb(inb(iobase+IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase+IRCC_LSAR);
- lsr= inb(iobase+IRCC_LSR);
- msgcnt = inb(iobase+IRCC_LCR_B) & 0x08;
+ outb(inb(iobase + IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase + IRCC_LSAR);
+ lsr= inb(iobase + IRCC_LSR);
+ msgcnt = inb(iobase + IRCC_LCR_B) & 0x08;
IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__,
get_dma_residue(self->io.dma));
len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
- /* Look for errors
- */
-
- if(lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) {
+ /* Look for errors */
+ if (lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) {
self->stats.rx_errors++;
- if(lsr & IRCC_LSR_FRAME_ERROR) self->stats.rx_frame_errors++;
- if(lsr & IRCC_LSR_CRC_ERROR) self->stats.rx_crc_errors++;
- if(lsr & IRCC_LSR_SIZE_ERROR) self->stats.rx_length_errors++;
- if(lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN)) self->stats.rx_length_errors++;
+ if (lsr & IRCC_LSR_FRAME_ERROR)
+ self->stats.rx_frame_errors++;
+ if (lsr & IRCC_LSR_CRC_ERROR)
+ self->stats.rx_crc_errors++;
+ if (lsr & IRCC_LSR_SIZE_ERROR)
+ self->stats.rx_length_errors++;
+ if (lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN))
+ self->stats.rx_length_errors++;
return;
}
+
/* Remove CRC */
- if (self->io.speed < 4000000)
- len -= 2;
- else
- len -= 4;
+ len -= self->io.speed < 4000000 ? 2 : 4;
- if ((len < 2) || (len > 2050)) {
+ if (len < 2 || len > 2050) {
IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len);
return;
}
IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len);
- skb = dev_alloc_skb(len+1);
- if (!skb) {
+ skb = dev_alloc_skb(len + 1);
+ if (!skb) {
IRDA_WARNING("%s(), memory squeeze, dropping frame.\n",
__FUNCTION__);
return;
*/
do {
async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
- inb(iobase+UART_RX));
+ inb(iobase + UART_RX));
/* Make sure we don't stay here to long */
if (boguscount++ > 32) {
IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__);
break;
}
- } while (inb(iobase+UART_LSR) & UART_LSR_DR);
+ } while (inb(iobase + UART_LSR) & UART_LSR_DR);
}
spin_lock(&self->lock);
/* Check if we should use the SIR interrupt handler */
- if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
+ if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
ret = smsc_ircc_interrupt_sir(dev);
goto irq_ret_unlock;
}
iobase = self->io.fir_base;
register_bank(iobase, 0);
- iir = inb(iobase+IRCC_IIR);
+ iir = inb(iobase + IRCC_IIR);
if (iir == 0)
goto irq_ret_unlock;
ret = IRQ_HANDLED;
/* Disable interrupts */
- outb(0, iobase+IRCC_IER);
- lcra = inb(iobase+IRCC_LCR_A);
- lsr = inb(iobase+IRCC_LSR);
+ outb(0, iobase + IRCC_IER);
+ lcra = inb(iobase + IRCC_LCR_A);
+ lsr = inb(iobase + IRCC_LSR);
IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir);
/* Enable interrupts again */
register_bank(iobase, 0);
- outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, iobase+IRCC_IER);
+ outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
irq_ret_unlock:
spin_unlock(&self->lock);
iobase = self->io.sir_base;
- iir = inb(iobase+UART_IIR) & UART_IIR_ID;
+ iir = inb(iobase + UART_IIR) & UART_IIR_ID;
if (iir == 0)
return IRQ_NONE;
while (iir) {
/* Clear interrupt */
- lsr = inb(iobase+UART_LSR);
+ lsr = inb(iobase + UART_LSR);
IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
__FUNCTION__, iir, lsr, iobase);
self->irlap = NULL;
free_irq(self->io.irq, dev);
-
disable_dma(self->io.dma);
-
free_dma(self->io.dma);
return 0;
{
IRDA_MESSAGE("%s, Suspending\n", driver_name);
- if (self->io.suspended)
- return;
-
- smsc_ircc_net_close(self->netdev);
-
- self->io.suspended = 1;
+ if (!self->io.suspended) {
+ smsc_ircc_net_close(self->netdev);
+ self->io.suspended = 1;
+ }
}
static void smsc_ircc_wakeup(struct smsc_ircc_cb *self)
/* Stop interrupts */
register_bank(iobase, 0);
- outb(0, iobase+IRCC_IER);
- outb(IRCC_MASTER_RESET, iobase+IRCC_MASTER);
- outb(0x00, iobase+IRCC_MASTER);
+ outb(0, iobase + IRCC_IER);
+ outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
+ outb(0x00, iobase + IRCC_MASTER);
#if 0
/* Reset to SIR mode */
register_bank(iobase, 1);
- outb(IRCC_CFGA_IRDA_SIR_A|IRCC_CFGA_TX_POLARITY, iobase+IRCC_SCE_CFGA);
- outb(IRCC_CFGB_IR, iobase+IRCC_SCE_CFGB);
+ outb(IRCC_CFGA_IRDA_SIR_A|IRCC_CFGA_TX_POLARITY, iobase + IRCC_SCE_CFGA);
+ outb(IRCC_CFGB_IR, iobase + IRCC_SCE_CFGB);
#endif
spin_unlock_irqrestore(&self->lock, flags);
IRDA_DEBUG(1, "%s\n", __FUNCTION__);
- for (i=0; i < 2; i++) {
+ for (i = 0; i < 2; i++) {
if (dev_self[i])
smsc_ircc_close(dev_self[i]);
}
IRDA_DEBUG(3, "%s\n", __FUNCTION__);
IRDA_ASSERT(self != NULL, return;);
- dev= self->netdev;
+ dev = self->netdev;
IRDA_ASSERT(dev != NULL, return;);
dev->hard_start_xmit = &smsc_ircc_hard_xmit_sir;
sir_base = self->io.sir_base;
/* Reset everything */
- outb(IRCC_MASTER_RESET, fir_base+IRCC_MASTER);
+ outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);
#if SMSC_IRCC2_C_SIR_STOP
/*smsc_ircc_sir_stop(self);*/
#endif
register_bank(fir_base, 1);
- outb(((inb(fir_base+IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base+IRCC_SCE_CFGA);
+ outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base + IRCC_SCE_CFGA);
/* Initialize UART */
- outb(UART_LCR_WLEN8, sir_base+UART_LCR); /* Reset DLAB */
- outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base+UART_MCR);
+ outb(UART_LCR_WLEN8, sir_base + UART_LCR); /* Reset DLAB */
+ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR);
/* Turn on interrups */
- outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base+UART_IER);
+ outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
- outb(0x00, fir_base+IRCC_MASTER);
+ outb(0x00, fir_base + IRCC_MASTER);
}
#if SMSC_IRCC2_C_SIR_STOP
iobase = self->io.sir_base;
/* Reset UART */
- outb(0, iobase+UART_MCR);
+ outb(0, iobase + UART_MCR);
/* Turn off interrupts */
- outb(0, iobase+UART_IER);
+ outb(0, iobase + UART_IER);
}
#endif
}
self->stats.tx_packets++;
- if(self->io.speed <= 115200) {
- /*
- * Reset Rx FIFO to make sure that all reflected transmit data
- * is discarded. This is needed for half duplex operation
- */
- fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR;
- if (self->io.speed < 38400)
- fcr |= UART_FCR_TRIGGER_1;
- else
- fcr |= UART_FCR_TRIGGER_14;
+ if (self->io.speed <= 115200) {
+ /*
+ * Reset Rx FIFO to make sure that all reflected transmit data
+ * is discarded. This is needed for half duplex operation
+ */
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR;
+ fcr |= self->io.speed < 38400 ?
+ UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
- outb(fcr, iobase+UART_FCR);
+ outb(fcr, iobase + UART_FCR);
- /* Turn on receive interrupts */
- outb(UART_IER_RDI, iobase+UART_IER);
+ /* Turn on receive interrupts */
+ outb(UART_IER_RDI, iobase + UART_IER);
}
}
}
int actual = 0;
/* Tx FIFO should be empty! */
- if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
+ if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) {
IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__);
return 0;
}
/* Fill FIFO with current frame */
- while ((fifo_size-- > 0) && (actual < len)) {
+ while (fifo_size-- > 0 && actual < len) {
/* Transmit next byte */
- outb(buf[actual], iobase+UART_TX);
+ outb(buf[actual], iobase + UART_TX);
actual++;
}
return actual;
IRDA_ASSERT(self != NULL, return;);
- for(i=0; smsc_transceivers[i].name!=NULL; i++)
- if((*smsc_transceivers[i].probe)(self->io.fir_base)) {
+ for (i = 0; smsc_transceivers[i].name != NULL; i++)
+ if (smsc_transceivers[i].probe(self->io.fir_base)) {
IRDA_MESSAGE(" %s transceiver found\n",
smsc_transceivers[i].name);
- self->transceiver= i+1;
+ self->transceiver= i + 1;
return;
}
+
IRDA_MESSAGE("No transceiver found. Defaulting to %s\n",
smsc_transceivers[SMSC_IRCC2_C_DEFAULT_TRANSCEIVER].name);
- self->transceiver= SMSC_IRCC2_C_DEFAULT_TRANSCEIVER;
+ self->transceiver = SMSC_IRCC2_C_DEFAULT_TRANSCEIVER;
}
unsigned int trx;
trx = self->transceiver;
- if(trx>0) (*smsc_transceivers[trx-1].set_for_speed)(self->io.fir_base, speed);
+ if (trx > 0)
+ smsc_transceivers[trx - 1].set_for_speed(self->io.fir_base, speed);
}
/*
static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
{
- int iobase;
+ int iobase = self->io.sir_base;
int count = SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US;
- iobase = self->io.sir_base;
-
/* Calibrated busy loop */
- while((count-- > 0) && !(inb(iobase+UART_LSR) & UART_LSR_TEMT))
+ while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT))
udelay(1);
- if(count == 0)
+ if (count == 0)
IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__);
}
static int __init smsc_ircc_look_for_chips(void)
{
smsc_chip_address_t *address;
- char *type;
+ char *type;
unsigned int cfg_base, found;
found = 0;
address = possible_addresses;
- while(address->cfg_base){
+ while (address->cfg_base) {
cfg_base = address->cfg_base;
/*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/
- if( address->type & SMSCSIO_TYPE_FDC){
+ if (address->type & SMSCSIO_TYPE_FDC) {
type = "FDC";
- if((address->type) & SMSCSIO_TYPE_FLAT) {
- if(!smsc_superio_flat(fdc_chips_flat,cfg_base, type)) found++;
- }
- if((address->type) & SMSCSIO_TYPE_PAGED) {
- if(!smsc_superio_paged(fdc_chips_paged,cfg_base, type)) found++;
- }
+ if (address->type & SMSCSIO_TYPE_FLAT)
+ if (!smsc_superio_flat(fdc_chips_flat, cfg_base, type))
+ found++;
+
+ if (address->type & SMSCSIO_TYPE_PAGED)
+ if (!smsc_superio_paged(fdc_chips_paged, cfg_base, type))
+ found++;
}
- if( address->type & SMSCSIO_TYPE_LPC){
+ if (address->type & SMSCSIO_TYPE_LPC) {
type = "LPC";
- if((address->type) & SMSCSIO_TYPE_FLAT) {
- if(!smsc_superio_flat(lpc_chips_flat,cfg_base,type)) found++;
- }
- if((address->type) & SMSCSIO_TYPE_PAGED) {
- if(!smsc_superio_paged(lpc_chips_paged,cfg_base,"LPC")) found++;
- }
+ if (address->type & SMSCSIO_TYPE_FLAT)
+ if (!smsc_superio_flat(lpc_chips_flat, cfg_base, type))
+ found++;
+
+ if (address->type & SMSCSIO_TYPE_PAGED)
+ if (!smsc_superio_paged(lpc_chips_paged, cfg_base, type))
+ found++;
}
address++;
}
IRDA_DEBUG(1, "%s\n", __FUNCTION__);
- if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type)==NULL)
+ if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL)
return ret;
outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase);
- mode = inb(cfgbase+1);
+ mode = inb(cfgbase + 1);
/*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/
- if(!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA))
+ if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA))
IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__);
outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase);
- sirbase = inb(cfgbase+1) << 2;
+ sirbase = inb(cfgbase + 1) << 2;
/* FIR iobase */
outb(SMSCSIOFLAT_FIRBASEADDR_REG, cfgbase);
- firbase = inb(cfgbase+1) << 3;
+ firbase = inb(cfgbase + 1) << 3;
/* DMA */
outb(SMSCSIOFLAT_FIRDMASELECT_REG, cfgbase);
- dma = inb(cfgbase+1) & SMSCSIOFLAT_FIRDMASELECT_MASK;
+ dma = inb(cfgbase + 1) & SMSCSIOFLAT_FIRDMASELECT_MASK;
/* IRQ */
outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase);
- irq = inb(cfgbase+1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
+ irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode);
- if (firbase) {
- if (smsc_ircc_open(firbase, sirbase, dma, irq) == 0)
- ret=0;
- }
+ if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0)
+ ret = 0;
/* Exit configuration */
outb(SMSCSIO_CFGEXITKEY, cfgbase);
IRDA_DEBUG(1, "%s\n", __FUNCTION__);
- if (smsc_ircc_probe(cfg_base,0x20,chips,type)==NULL)
+ if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL)
return ret;
/* Select logical device (UART2) */
/* SIR iobase */
outb(0x60, cfg_base);
- sir_io = inb(cfg_base + 1) << 8;
+ sir_io = inb(cfg_base + 1) << 8;
outb(0x61, cfg_base);
sir_io |= inb(cfg_base + 1);
fir_io |= inb(cfg_base + 1);
outb(0x2b, cfg_base); /* ??? */
- if (fir_io) {
- if (smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0)
- ret=0;
- }
+ if (fir_io && smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0)
+ ret = 0;
/* Exit configuration */
outb(SMSCSIO_CFGEXITKEY, cfg_base);
}
-static int __init smsc_access(unsigned short cfg_base,unsigned char reg)
+static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
{
IRDA_DEBUG(1, "%s\n", __FUNCTION__);
outb(reg, cfg_base);
-
- if (inb(cfg_base)!=reg)
- return -1;
-
- return 0;
+ return inb(cfg_base) != reg ? -1 : 0;
}
-static const smsc_chip_t * __init smsc_ircc_probe(unsigned short cfg_base,u8 reg,const smsc_chip_t *chip,char *type)
+static const smsc_chip_t * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const smsc_chip_t *chip, char *type)
{
- u8 devid,xdevid,rev;
+ u8 devid, xdevid, rev;
IRDA_DEBUG(1, "%s\n", __FUNCTION__);
outb(reg, cfg_base);
- xdevid=inb(cfg_base+1);
+ xdevid = inb(cfg_base + 1);
/* Enter configuration */
/* probe device ID */
- if (smsc_access(cfg_base,reg))
+ if (smsc_access(cfg_base, reg))
return NULL;
- devid=inb(cfg_base+1);
+ devid = inb(cfg_base + 1);
- if (devid==0) /* typical value for unused port */
- return NULL;
-
- if (devid==0xff) /* typical value for unused port */
+ if (devid == 0 || devid == 0xff) /* typical values for unused port */
return NULL;
/* probe revision ID */
- if (smsc_access(cfg_base,reg+1))
+ if (smsc_access(cfg_base, reg + 1))
return NULL;
- rev=inb(cfg_base+1);
+ rev = inb(cfg_base + 1);
- if (rev>=128) /* i think this will make no sense */
+ if (rev >= 128) /* i think this will make no sense */
return NULL;
- if (devid==xdevid) /* protection against false positives */
+ if (devid == xdevid) /* protection against false positives */
return NULL;
/* Check for expected device ID; are there others? */
- while(chip->devid!=devid) {
+ while (chip->devid != devid) {
chip++;
- if (chip->name==NULL)
+ if (chip->name == NULL)
return NULL;
}
- IRDA_MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n",devid,rev,cfg_base,type,chip->name);
+ IRDA_MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n",
+ devid, rev, cfg_base, type, chip->name);
- if (chip->rev>rev){
+ if (chip->rev > rev) {
IRDA_MESSAGE("Revision higher than expected\n");
return NULL;
}
- if (chip->flags&NoIRDA)
+ if (chip->flags & NoIRDA)
IRDA_MESSAGE("chipset does not support IRDA\n");
return chip;
IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
__FUNCTION__, cfg_base);
} else {
- if (!smsc_superio_flat(fdc_chips_flat,cfg_base,"FDC")
- ||!smsc_superio_paged(fdc_chips_paged,cfg_base,"FDC"))
+ if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") ||
+ !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC"))
ret = 0;
release_region(cfg_base, 2);
IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
__FUNCTION__, cfg_base);
} else {
- if (!smsc_superio_flat(lpc_chips_flat,cfg_base,"LPC")
- ||!smsc_superio_paged(lpc_chips_paged,cfg_base,"LPC"))
+ if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") ||
+ !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC"))
ret = 0;
+
release_region(cfg_base, 2);
}
return ret;
static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed)
{
unsigned long jiffies_now, jiffies_timeout;
- u8 val;
+ u8 val;
- jiffies_now= jiffies;
- jiffies_timeout= jiffies+SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES;
+ jiffies_now = jiffies;
+ jiffies_timeout = jiffies + SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES;
/* ATC */
register_bank(fir_base, 4);
- outb((inb(fir_base+IRCC_ATC) & IRCC_ATC_MASK) |IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE, fir_base+IRCC_ATC);
- while((val=(inb(fir_base+IRCC_ATC) & IRCC_ATC_nPROGREADY)) && !time_after(jiffies, jiffies_timeout));
- if(val)
+ outb((inb(fir_base + IRCC_ATC) & IRCC_ATC_MASK) | IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE,
+ fir_base + IRCC_ATC);
+
+ while ((val = (inb(fir_base + IRCC_ATC) & IRCC_ATC_nPROGREADY)) &&
+ !time_after(jiffies, jiffies_timeout))
+ /* empty */;
+
+ if (val)
IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__,
- inb(fir_base+IRCC_ATC));
+ inb(fir_base + IRCC_ATC));
}
/*
static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed)
{
- u8 fast_mode;
+ u8 fast_mode;
- switch(speed)
- {
- default:
- case 576000 :
+ switch (speed) {
+ default:
+ case 576000 :
fast_mode = 0;
break;
- case 1152000 :
- case 4000000 :
+ case 1152000 :
+ case 4000000 :
fast_mode = IRCC_LCR_A_FAST;
break;
-
}
register_bank(fir_base, 0);
- outb((inb(fir_base+IRCC_LCR_A) & 0xbf) | fast_mode, fir_base+IRCC_LCR_A);
+ outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A);
}
/*
static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed)
{
- u8 fast_mode;
+ u8 fast_mode;
- switch(speed)
- {
- default:
- case 576000 :
+ switch (speed) {
+ default:
+ case 576000 :
fast_mode = 0;
break;
- case 1152000 :
- case 4000000 :
+ case 1152000 :
+ case 4000000 :
fast_mode = /*IRCC_LCR_A_FAST |*/ IRCC_LCR_A_GP_DATA;
break;
}
/* This causes an interrupt */
register_bank(fir_base, 0);
- outb((inb(fir_base+IRCC_LCR_A) & 0xbf) | fast_mode, fir_base+IRCC_LCR_A);
+ outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A);
}
/*
module_init(smsc_ircc_init);
module_exit(smsc_ircc_cleanup);
-
-MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>");
-MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver");
-MODULE_LICENSE("GPL");
-
-module_param(ircc_dma, int, 0);
-MODULE_PARM_DESC(ircc_dma, "DMA channel");
-module_param(ircc_irq, int, 0);
-MODULE_PARM_DESC(ircc_irq, "IRQ line");
-module_param(ircc_fir, int, 0);
-MODULE_PARM_DESC(ircc_fir, "FIR Base Address");
-module_param(ircc_sir, int, 0);
-MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
-module_param(ircc_cfg, int, 0);
-MODULE_PARM_DESC(ircc_cfg, "Configuration register base address");
-module_param(ircc_transceiver, int, 0);
-MODULE_PARM_DESC(ircc_transceiver, "Transceiver type");
projects / linux-2.6 / commitdiff