<http://linux-apus.sourceforge.net/>.
endchoice
+config QUICC_ENGINE
+ bool
+ depends on PPC_MPC836x || PPC_MPC832x
+ default y
+ help
+ The QUICC Engine (QE) is a new generation of communications
+ coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
+ Selecting this option means that you wish to build a kernel
+ for a machine with a QE coprocessor.
+
config PPC_PSERIES
depends on PPC_MULTIPLATFORM && PPC64
bool "IBM pSeries & new (POWER5-based) iSeries"
# XXX source "arch/ppc/8260_io/Kconfig"
+source "arch/powerpc/sysdev/qe_lib/Kconfig"
+
source "arch/powerpc/platforms/iseries/Kconfig"
source "lib/Kconfig"
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_PPC_TODC) += todc.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
+obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_I8259) += i8259.o
--- /dev/null
+#
+# QE Communication options
+#
+
+menu "QE Options"
+ depends on QUICC_ENGINE
+
+config UCC_SLOW
+ bool "UCC Slow Protocols Support"
+ default n
+ select UCC
+ help
+ This option provides qe_lib support to UCC slow
+ protocols: UART, BISYNC, QMC
+
+config UCC_FAST
+ bool "UCC Fast Protocols Support"
+ default n
+ select UCC
+ select UCC_SLOW
+ help
+ This option provides qe_lib support to UCC fast
+ protocols: HDLC, Ethernet, ATM, transparent
+
+config UCC
+ bool
+ default y if UCC_FAST || UCC_SLOW
+
+endmenu
+
--- /dev/null
+#
+# Makefile for the linux ppc-specific parts of QE
+#
+obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o
+
+obj-$(CONFIG_UCC) += ucc.o
+obj-$(CONFIG_UCC_SLOW) += ucc_slow.o
+obj-$(CONFIG_UCC_FAST) += ucc_fast.o
--- /dev/null
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
+ *
+ * Description:
+ * General Purpose functions for the global management of the
+ * QUICC Engine (QE).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+#include <asm/prom.h>
+#include <asm/rheap.h>
+
+static void qe_snums_init(void);
+static void qe_muram_init(void);
+static int qe_sdma_init(void);
+
+static DEFINE_SPINLOCK(qe_lock);
+
+/* QE snum state */
+enum qe_snum_state {
+ QE_SNUM_STATE_USED,
+ QE_SNUM_STATE_FREE
+};
+
+/* QE snum */
+struct qe_snum {
+ u8 num;
+ enum qe_snum_state state;
+};
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+struct qe_immap *qe_immr = NULL;
+EXPORT_SYMBOL(qe_immr);
+
+static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
+
+static phys_addr_t qebase = -1;
+
+phys_addr_t get_qe_base(void)
+{
+ struct device_node *qe;
+
+ if (qebase != -1)
+ return qebase;
+
+ qe = of_find_node_by_type(NULL, "qe");
+ if (qe) {
+ unsigned int size;
+ const void *prop = get_property(qe, "reg", &size);
+ qebase = of_translate_address(qe, prop);
+ of_node_put(qe);
+ };
+
+ return qebase;
+}
+
+EXPORT_SYMBOL(get_qe_base);
+
+void qe_reset(void)
+{
+ if (qe_immr == NULL)
+ qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
+
+ qe_snums_init();
+
+ qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
+ QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ /* Reclaim the MURAM memory for our use. */
+ qe_muram_init();
+
+ if (qe_sdma_init())
+ panic("sdma init failed!");
+}
+
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
+{
+ unsigned long flags;
+ u8 mcn_shift = 0, dev_shift = 0;
+
+ spin_lock_irqsave(&qe_lock, flags);
+ if (cmd == QE_RESET) {
+ out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
+ } else {
+ if (cmd == QE_ASSIGN_PAGE) {
+ /* Here device is the SNUM, not sub-block */
+ dev_shift = QE_CR_SNUM_SHIFT;
+ } else if (cmd == QE_ASSIGN_RISC) {
+ /* Here device is the SNUM, and mcnProtocol is
+ * e_QeCmdRiscAssignment value */
+ dev_shift = QE_CR_SNUM_SHIFT;
+ mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
+ } else {
+ if (device == QE_CR_SUBBLOCK_USB)
+ mcn_shift = QE_CR_MCN_USB_SHIFT;
+ else
+ mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
+ }
+
+ out_be32(&qe_immr->cp.cecdr,
+ immrbar_virt_to_phys((void *)cmd_input));
+ out_be32(&qe_immr->cp.cecr,
+ (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
+ mcn_protocol << mcn_shift));
+ }
+
+ /* wait for the QE_CR_FLG to clear */
+ while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
+ cpu_relax();
+ spin_unlock_irqrestore(&qe_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(qe_issue_cmd);
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * 16 BRGs, which can be connected to the QE channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+static unsigned int brg_clk = 0;
+
+unsigned int get_brg_clk(void)
+{
+ struct device_node *qe;
+ if (brg_clk)
+ return brg_clk;
+
+ qe = of_find_node_by_type(NULL, "qe");
+ if (qe) {
+ unsigned int size;
+ const u32 *prop = get_property(qe, "brg-frequency", &size);
+ brg_clk = *prop;
+ of_node_put(qe);
+ };
+ return brg_clk;
+}
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void qe_setbrg(u32 brg, u32 rate)
+{
+ volatile u32 *bp;
+ u32 divisor, tempval;
+ int div16 = 0;
+
+ bp = &qe_immr->brg.brgc1;
+ bp += brg;
+
+ divisor = (get_brg_clk() / rate);
+ if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
+ div16 = 1;
+ divisor /= 16;
+ }
+
+ tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
+ if (div16)
+ tempval |= QE_BRGC_DIV16;
+
+ out_be32(bp, tempval);
+}
+
+/* Initialize SNUMs (thread serial numbers) according to
+ * QE Module Control chapter, SNUM table
+ */
+static void qe_snums_init(void)
+{
+ int i;
+ static const u8 snum_init[] = {
+ 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
+ 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
+ 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
+ 0xD8, 0xD9, 0xE8, 0xE9,
+ };
+
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ snums[i].num = snum_init[i];
+ snums[i].state = QE_SNUM_STATE_FREE;
+ }
+}
+
+int qe_get_snum(void)
+{
+ unsigned long flags;
+ int snum = -EBUSY;
+ int i;
+
+ spin_lock_irqsave(&qe_lock, flags);
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ if (snums[i].state == QE_SNUM_STATE_FREE) {
+ snums[i].state = QE_SNUM_STATE_USED;
+ snum = snums[i].num;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&qe_lock, flags);
+
+ return snum;
+}
+EXPORT_SYMBOL(qe_get_snum);
+
+void qe_put_snum(u8 snum)
+{
+ int i;
+
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ if (snums[i].num == snum) {
+ snums[i].state = QE_SNUM_STATE_FREE;
+ break;
+ }
+ }
+}
+EXPORT_SYMBOL(qe_put_snum);
+
+static int qe_sdma_init(void)
+{
+ struct sdma *sdma = &qe_immr->sdma;
+ u32 sdma_buf_offset;
+
+ if (!sdma)
+ return -ENODEV;
+
+ /* allocate 2 internal temporary buffers (512 bytes size each) for
+ * the SDMA */
+ sdma_buf_offset = qe_muram_alloc(512 * 2, 64);
+ if (IS_MURAM_ERR(sdma_buf_offset))
+ return -ENOMEM;
+
+ out_be32(&sdma->sdebcr, sdma_buf_offset & QE_SDEBCR_BA_MASK);
+ out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | (0x1 >>
+ QE_SDMR_CEN_SHIFT)));
+
+ return 0;
+}
+
+/*
+ * muram_alloc / muram_free bits.
+ */
+static DEFINE_SPINLOCK(qe_muram_lock);
+
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t qe_boot_muram_rh_block[16];
+static rh_info_t qe_muram_info;
+
+static void qe_muram_init(void)
+{
+ struct device_node *np;
+ u32 address;
+ u64 size;
+ unsigned int flags;
+
+ /* initialize the info header */
+ rh_init(&qe_muram_info, 1,
+ sizeof(qe_boot_muram_rh_block) /
+ sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);
+
+ /* Attach the usable muram area */
+ /* XXX: This is a subset of the available muram. It
+ * varies with the processor and the microcode patches activated.
+ */
+ if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
+ address = *of_get_address(np, 0, &size, &flags);
+ of_node_put(np);
+ rh_attach_region(&qe_muram_info,
+ (void *)address, (int)size);
+ }
+}
+
+/* This function returns an index into the MURAM area.
+ */
+u32 qe_muram_alloc(u32 size, u32 align)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ start = rh_alloc_align(&qe_muram_info, size, align, "QE");
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return (u32) start;
+}
+EXPORT_SYMBOL(qe_muram_alloc);
+
+int qe_muram_free(u32 offset)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ ret = rh_free(&qe_muram_info, (void *)offset);
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(qe_muram_free);
+
+/* not sure if this is ever needed */
+u32 qe_muram_alloc_fixed(u32 offset, u32 size)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ start = rh_alloc_fixed(&qe_muram_info, (void *)offset, size, "commproc");
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return (u32) start;
+}
+EXPORT_SYMBOL(qe_muram_alloc_fixed);
+
+void qe_muram_dump(void)
+{
+ rh_dump(&qe_muram_info);
+}
+EXPORT_SYMBOL(qe_muram_dump);
+
+void *qe_muram_addr(u32 offset)
+{
+ return (void *)&qe_immr->muram[offset];
+}
+EXPORT_SYMBOL(qe_muram_addr);
--- /dev/null
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_ic.c
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * QUICC ENGINE Interrupt Controller
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/sysdev.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/qe_ic.h>
+
+#include "qe_ic.h"
+
+static DEFINE_SPINLOCK(qe_ic_lock);
+
+static struct qe_ic_info qe_ic_info[] = {
+ [1] = {
+ .mask = 0x00008000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [2] = {
+ .mask = 0x00004000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [3] = {
+ .mask = 0x00002000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [10] = {
+ .mask = 0x00000040,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [11] = {
+ .mask = 0x00000020,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [12] = {
+ .mask = 0x00000010,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [13] = {
+ .mask = 0x00000008,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 4,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [14] = {
+ .mask = 0x00000004,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 5,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [15] = {
+ .mask = 0x00000002,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 6,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [20] = {
+ .mask = 0x10000000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPRTA,
+ },
+ [25] = {
+ .mask = 0x00800000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [26] = {
+ .mask = 0x00400000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [27] = {
+ .mask = 0x00200000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [28] = {
+ .mask = 0x00100000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [32] = {
+ .mask = 0x80000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [33] = {
+ .mask = 0x40000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [34] = {
+ .mask = 0x20000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [35] = {
+ .mask = 0x10000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [36] = {
+ .mask = 0x08000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 4,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [40] = {
+ .mask = 0x00800000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [41] = {
+ .mask = 0x00400000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [42] = {
+ .mask = 0x00200000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [43] = {
+ .mask = 0x00100000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPYCC,
+ },
+};
+
+static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg)
+{
+ return in_be32(base + (reg >> 2));
+}
+
+static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg,
+ u32 value)
+{
+ out_be32(base + (reg >> 2), value);
+}
+
+static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
+{
+ return irq_desc[virq].chip_data;
+}
+
+#define virq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
+
+static void qe_ic_unmask_irq(unsigned int virq)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ unsigned long flags;
+ u32 temp;
+
+ spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp | qe_ic_info[src].mask);
+
+ spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq(unsigned int virq)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ unsigned long flags;
+ u32 temp;
+
+ spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp & ~qe_ic_info[src].mask);
+
+ spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq_and_ack(unsigned int virq)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ unsigned long flags;
+ u32 temp;
+
+ spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp & ~qe_ic_info[src].mask);
+
+ /* There is nothing to do for ack here, ack is handled in ISR */
+
+ spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static struct irq_chip qe_ic_irq_chip = {
+ .typename = " QEIC ",
+ .unmask = qe_ic_unmask_irq,
+ .mask = qe_ic_mask_irq,
+ .mask_ack = qe_ic_mask_irq_and_ack,
+};
+
+static int qe_ic_host_match(struct irq_host *h, struct device_node *node)
+{
+ struct qe_ic *qe_ic = h->host_data;
+
+ /* Exact match, unless qe_ic node is NULL */
+ return qe_ic->of_node == NULL || qe_ic->of_node == node;
+}
+
+static int qe_ic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct qe_ic *qe_ic = h->host_data;
+ struct irq_chip *chip;
+
+ if (qe_ic_info[hw].mask == 0) {
+ printk(KERN_ERR "Can't map reserved IRQ \n");
+ return -EINVAL;
+ }
+ /* Default chip */
+ chip = &qe_ic->hc_irq;
+
+ set_irq_chip_data(virq, qe_ic);
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+
+ set_irq_chip_and_handler(virq, chip, handle_level_irq);
+
+ return 0;
+}
+
+static int qe_ic_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 * intspec, unsigned int intsize,
+ irq_hw_number_t * out_hwirq,
+ unsigned int *out_flags)
+{
+ *out_hwirq = intspec[0];
+ if (intsize > 1)
+ *out_flags = intspec[1];
+ else
+ *out_flags = IRQ_TYPE_NONE;
+ return 0;
+}
+
+static struct irq_host_ops qe_ic_host_ops = {
+ .match = qe_ic_host_match,
+ .map = qe_ic_host_map,
+ .xlate = qe_ic_host_xlate,
+};
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic, struct pt_regs *regs)
+{
+ int irq;
+
+ BUG_ON(qe_ic == NULL);
+
+ /* get the interrupt source vector. */
+ irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
+
+ if (irq == 0)
+ return NO_IRQ;
+
+ return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic, struct pt_regs *regs)
+{
+ int irq;
+
+ BUG_ON(qe_ic == NULL);
+
+ /* get the interrupt source vector. */
+ irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
+
+ if (irq == 0)
+ return NO_IRQ;
+
+ return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* FIXME: We mask all the QE Low interrupts while handling. We should
+ * let other interrupt come in, but BAD interrupts are generated */
+void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ struct qe_ic *qe_ic = desc->handler_data;
+ struct irq_chip *chip = irq_desc[irq].chip;
+
+ unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic, regs);
+
+ chip->mask_ack(irq);
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ chip->unmask(irq);
+}
+
+/* FIXME: We mask all the QE High interrupts while handling. We should
+ * let other interrupt come in, but BAD interrupts are generated */
+void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ struct qe_ic *qe_ic = desc->handler_data;
+ struct irq_chip *chip = irq_desc[irq].chip;
+
+ unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic, regs);
+
+ chip->mask_ack(irq);
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ chip->unmask(irq);
+}
+
+void __init qe_ic_init(struct device_node *node, unsigned int flags)
+{
+ struct qe_ic *qe_ic;
+ struct resource res;
+ u32 temp = 0, ret, high_active = 0;
+
+ qe_ic = alloc_bootmem(sizeof(struct qe_ic));
+ if (qe_ic == NULL)
+ return;
+
+ memset(qe_ic, 0, sizeof(struct qe_ic));
+ qe_ic->of_node = node ? of_node_get(node) : NULL;
+
+ qe_ic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
+ NR_QE_IC_INTS, &qe_ic_host_ops, 0);
+ if (qe_ic->irqhost == NULL) {
+ of_node_put(node);
+ return;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ return;
+
+ qe_ic->regs = ioremap(res.start, res.end - res.start + 1);
+
+ qe_ic->irqhost->host_data = qe_ic;
+ qe_ic->hc_irq = qe_ic_irq_chip;
+
+ qe_ic->virq_high = irq_of_parse_and_map(node, 0);
+ qe_ic->virq_low = irq_of_parse_and_map(node, 1);
+
+ if (qe_ic->virq_low == NO_IRQ) {
+ printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
+ return;
+ }
+
+ /* default priority scheme is grouped. If spread mode is */
+ /* required, configure cicr accordingly. */
+ if (flags & QE_IC_SPREADMODE_GRP_W)
+ temp |= CICR_GWCC;
+ if (flags & QE_IC_SPREADMODE_GRP_X)
+ temp |= CICR_GXCC;
+ if (flags & QE_IC_SPREADMODE_GRP_Y)
+ temp |= CICR_GYCC;
+ if (flags & QE_IC_SPREADMODE_GRP_Z)
+ temp |= CICR_GZCC;
+ if (flags & QE_IC_SPREADMODE_GRP_RISCA)
+ temp |= CICR_GRTA;
+ if (flags & QE_IC_SPREADMODE_GRP_RISCB)
+ temp |= CICR_GRTB;
+
+ /* choose destination signal for highest priority interrupt */
+ if (flags & QE_IC_HIGH_SIGNAL) {
+ temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
+ high_active = 1;
+ }
+
+ qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+
+ set_irq_data(qe_ic->virq_low, qe_ic);
+ set_irq_chained_handler(qe_ic->virq_low, qe_ic_cascade_low);
+
+ if (qe_ic->virq_high != NO_IRQ) {
+ set_irq_data(qe_ic->virq_high, qe_ic);
+ set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high);
+ }
+
+ printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs);
+}
+
+void qe_ic_set_highest_priority(unsigned int virq, int high)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp = 0;
+
+ temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
+
+ temp &= ~CICR_HP_MASK;
+ temp |= src << CICR_HP_SHIFT;
+
+ temp &= ~CICR_HPIT_MASK;
+ temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
+
+ qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+}
+
+/* Set Priority level within its group, from 1 to 8 */
+int qe_ic_set_priority(unsigned int virq, unsigned int priority)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp;
+
+ if (priority > 8 || priority == 0)
+ return -EINVAL;
+ if (src > 127)
+ return -EINVAL;
+ if (qe_ic_info[src].pri_reg == 0)
+ return -EINVAL;
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
+
+ if (priority < 4) {
+ temp &= ~(0x7 << (32 - priority * 3));
+ temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
+ } else {
+ temp &= ~(0x7 << (24 - priority * 3));
+ temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
+ }
+
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
+
+ return 0;
+}
+
+/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp, control_reg = QEIC_CICNR, shift = 0;
+
+ if (priority > 2 || priority == 0)
+ return -EINVAL;
+
+ switch (qe_ic_info[src].pri_reg) {
+ case QEIC_CIPZCC:
+ shift = CICNR_ZCC1T_SHIFT;
+ break;
+ case QEIC_CIPWCC:
+ shift = CICNR_WCC1T_SHIFT;
+ break;
+ case QEIC_CIPYCC:
+ shift = CICNR_YCC1T_SHIFT;
+ break;
+ case QEIC_CIPXCC:
+ shift = CICNR_XCC1T_SHIFT;
+ break;
+ case QEIC_CIPRTA:
+ shift = CRICR_RTA1T_SHIFT;
+ control_reg = QEIC_CRICR;
+ break;
+ case QEIC_CIPRTB:
+ shift = CRICR_RTB1T_SHIFT;
+ control_reg = QEIC_CRICR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ shift += (2 - priority) * 2;
+ temp = qe_ic_read(qe_ic->regs, control_reg);
+ temp &= ~(SIGNAL_MASK << shift);
+ temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
+ qe_ic_write(qe_ic->regs, control_reg, temp);
+
+ return 0;
+}
+
+static struct sysdev_class qe_ic_sysclass = {
+ set_kset_name("qe_ic"),
+};
+
+static struct sys_device device_qe_ic = {
+ .id = 0,
+ .cls = &qe_ic_sysclass,
+};
+
+static int __init init_qe_ic_sysfs(void)
+{
+ int rc;
+
+ printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
+
+ rc = sysdev_class_register(&qe_ic_sysclass);
+ if (rc) {
+ printk(KERN_ERR "Failed registering qe_ic sys class\n");
+ return -ENODEV;
+ }
+ rc = sysdev_register(&device_qe_ic);
+ if (rc) {
+ printk(KERN_ERR "Failed registering qe_ic sys device\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+subsys_initcall(init_qe_ic_sysfs);
--- /dev/null
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_ic.h
+ *
+ * QUICC ENGINE Interrupt Controller Header
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _POWERPC_SYSDEV_QE_IC_H
+#define _POWERPC_SYSDEV_QE_IC_H
+
+#include <asm/qe_ic.h>
+
+#define NR_QE_IC_INTS 64
+
+/* QE IC registers offset */
+#define QEIC_CICR 0x00
+#define QEIC_CIVEC 0x04
+#define QEIC_CRIPNR 0x08
+#define QEIC_CIPNR 0x0c
+#define QEIC_CIPXCC 0x10
+#define QEIC_CIPYCC 0x14
+#define QEIC_CIPWCC 0x18
+#define QEIC_CIPZCC 0x1c
+#define QEIC_CIMR 0x20
+#define QEIC_CRIMR 0x24
+#define QEIC_CICNR 0x28
+#define QEIC_CIPRTA 0x30
+#define QEIC_CIPRTB 0x34
+#define QEIC_CRICR 0x3c
+#define QEIC_CHIVEC 0x60
+
+/* Interrupt priority registers */
+#define CIPCC_SHIFT_PRI0 29
+#define CIPCC_SHIFT_PRI1 26
+#define CIPCC_SHIFT_PRI2 23
+#define CIPCC_SHIFT_PRI3 20
+#define CIPCC_SHIFT_PRI4 13
+#define CIPCC_SHIFT_PRI5 10
+#define CIPCC_SHIFT_PRI6 7
+#define CIPCC_SHIFT_PRI7 4
+
+/* CICR priority modes */
+#define CICR_GWCC 0x00040000
+#define CICR_GXCC 0x00020000
+#define CICR_GYCC 0x00010000
+#define CICR_GZCC 0x00080000
+#define CICR_GRTA 0x00200000
+#define CICR_GRTB 0x00400000
+#define CICR_HPIT_SHIFT 8
+#define CICR_HPIT_MASK 0x00000300
+#define CICR_HP_SHIFT 24
+#define CICR_HP_MASK 0x3f000000
+
+/* CICNR */
+#define CICNR_WCC1T_SHIFT 20
+#define CICNR_ZCC1T_SHIFT 28
+#define CICNR_YCC1T_SHIFT 12
+#define CICNR_XCC1T_SHIFT 4
+
+/* CRICR */
+#define CRICR_RTA1T_SHIFT 20
+#define CRICR_RTB1T_SHIFT 28
+
+/* Signal indicator */
+#define SIGNAL_MASK 3
+#define SIGNAL_HIGH 2
+#define SIGNAL_LOW 0
+
+struct qe_ic {
+ /* Control registers offset */
+ volatile u32 __iomem *regs;
+
+ /* The remapper for this QEIC */
+ struct irq_host *irqhost;
+
+ /* The "linux" controller struct */
+ struct irq_chip hc_irq;
+
+ /* The device node of the interrupt controller */
+ struct device_node *of_node;
+
+ /* VIRQ numbers of QE high/low irqs */
+ unsigned int virq_high;
+ unsigned int virq_low;
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+ u32 mask; /* location of this source at the QIMR register. */
+ u32 mask_reg; /* Mask register offset */
+ u8 pri_code; /* for grouped interrupts sources - the interrupt
+ code as appears at the group priority register */
+ u32 pri_reg; /* Group priority register offset */
+};
+
+#endif /* _POWERPC_SYSDEV_QE_IC_H */
--- /dev/null
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_io.c
+ *
+ * QE Parallel I/O ports configuration routines
+ *
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_soc.h>
+
+#undef DEBUG
+
+#define NUM_OF_PINS 32
+
+struct port_regs {
+ __be32 cpodr; /* Open drain register */
+ __be32 cpdata; /* Data register */
+ __be32 cpdir1; /* Direction register */
+ __be32 cpdir2; /* Direction register */
+ __be32 cppar1; /* Pin assignment register */
+ __be32 cppar2; /* Pin assignment register */
+};
+
+static struct port_regs *par_io = NULL;
+static int num_par_io_ports = 0;
+
+int par_io_init(struct device_node *np)
+{
+ struct resource res;
+ int ret;
+ const u32 *num_ports;
+
+ /* Map Parallel I/O ports registers */
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret)
+ return ret;
+ par_io = ioremap(res.start, res.end - res.start + 1);
+
+ num_ports = get_property(np, "num-ports", NULL);
+ if (num_ports)
+ num_par_io_ports = *num_ports;
+
+ return 0;
+}
+
+int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+ int assignment, int has_irq)
+{
+ u32 pin_mask1bit, pin_mask2bits, new_mask2bits, tmp_val;
+
+ if (!par_io)
+ return -1;
+
+ /* calculate pin location for single and 2 bits information */
+ pin_mask1bit = (u32) (1 << (NUM_OF_PINS - (pin + 1)));
+
+ /* Set open drain, if required */
+ tmp_val = in_be32(&par_io[port].cpodr);
+ if (open_drain)
+ out_be32(&par_io[port].cpodr, pin_mask1bit | tmp_val);
+ else
+ out_be32(&par_io[port].cpodr, ~pin_mask1bit & tmp_val);
+
+ /* define direction */
+ tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
+ in_be32(&par_io[port].cpdir2) :
+ in_be32(&par_io[port].cpdir1);
+
+ /* get all bits mask for 2 bit per port */
+ pin_mask2bits = (u32) (0x3 << (NUM_OF_PINS -
+ (pin % (NUM_OF_PINS / 2) + 1) * 2));
+
+ /* Get the final mask we need for the right definition */
+ new_mask2bits = (u32) (dir << (NUM_OF_PINS -
+ (pin % (NUM_OF_PINS / 2) + 1) * 2));
+
+ /* clear and set 2 bits mask */
+ if (pin > (NUM_OF_PINS / 2) - 1) {
+ out_be32(&par_io[port].cpdir2,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io[port].cpdir2, new_mask2bits | tmp_val);
+ } else {
+ out_be32(&par_io[port].cpdir1,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io[port].cpdir1, new_mask2bits | tmp_val);
+ }
+ /* define pin assignment */
+ tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
+ in_be32(&par_io[port].cppar2) :
+ in_be32(&par_io[port].cppar1);
+
+ new_mask2bits = (u32) (assignment << (NUM_OF_PINS -
+ (pin % (NUM_OF_PINS / 2) + 1) * 2));
+ /* clear and set 2 bits mask */
+ if (pin > (NUM_OF_PINS / 2) - 1) {
+ out_be32(&par_io[port].cppar2,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io[port].cppar2, new_mask2bits | tmp_val);
+ } else {
+ out_be32(&par_io[port].cppar1,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io[port].cppar1, new_mask2bits | tmp_val);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(par_io_config_pin);
+
+int par_io_data_set(u8 port, u8 pin, u8 val)
+{
+ u32 pin_mask, tmp_val;
+
+ if (port >= num_par_io_ports)
+ return -EINVAL;
+ if (pin >= NUM_OF_PINS)
+ return -EINVAL;
+ /* calculate pin location */
+ pin_mask = (u32) (1 << (NUM_OF_PINS - 1 - pin));
+
+ tmp_val = in_be32(&par_io[port].cpdata);
+
+ if (val == 0) /* clear */
+ out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
+ else /* set */
+ out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
+
+ return 0;
+}
+EXPORT_SYMBOL(par_io_data_set);
+
+int par_io_of_config(struct device_node *np)
+{
+ struct device_node *pio;
+ const phandle *ph;
+ int pio_map_len;
+ const unsigned int *pio_map;
+
+ if (par_io == NULL) {
+ printk(KERN_ERR "par_io not initialized \n");
+ return -1;
+ }
+
+ ph = get_property(np, "pio-handle", NULL);
+ if (ph == 0) {
+ printk(KERN_ERR "pio-handle not available \n");
+ return -1;
+ }
+
+ pio = of_find_node_by_phandle(*ph);
+
+ pio_map = get_property(pio, "pio-map", &pio_map_len);
+ if (pio_map == NULL) {
+ printk(KERN_ERR "pio-map is not set! \n");
+ return -1;
+ }
+ pio_map_len /= sizeof(unsigned int);
+ if ((pio_map_len % 6) != 0) {
+ printk(KERN_ERR "pio-map format wrong! \n");
+ return -1;
+ }
+
+ while (pio_map_len > 0) {
+ par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
+ (int) pio_map[2], (int) pio_map[3],
+ (int) pio_map[4], (int) pio_map[5]);
+ pio_map += 6;
+ pio_map_len -= 6;
+ }
+ of_node_put(pio);
+ return 0;
+}
+EXPORT_SYMBOL(par_io_of_config);
+
+#ifdef DEBUG
+static void dump_par_io(void)
+{
+ int i;
+
+ printk(KERN_INFO "PAR IO registars:\n");
+ printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io);
+ for (i = 0; i < num_par_io_ports; i++) {
+ printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io[i].cpodr,
+ in_be32(&par_io[i].cpodr));
+ printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io[i].cpdata,
+ in_be32(&par_io[i].cpdata));
+ printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io[i].cpdir1,
+ in_be32(&par_io[i].cpdir1));
+ printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io[i].cpdir2,
+ in_be32(&par_io[i].cpdir2));
+ printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io[i].cppar1,
+ in_be32(&par_io[i].cppar1));
+ printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io[i].cppar2,
+ in_be32(&par_io[i].cppar2));
+ }
+
+}
+EXPORT_SYMBOL(dump_par_io);
+#endif /* DEBUG */
--- /dev/null
+/*
+ * arch/powerpc/sysdev/qe_lib/ucc.c
+ *
+ * QE UCC API Set - UCC specific routines implementations.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+#include <asm/ucc.h>
+
+static DEFINE_SPINLOCK(ucc_lock);
+
+int ucc_set_qe_mux_mii_mng(int ucc_num)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucc_lock, flags);
+ out_be32(&qe_immr->qmx.cmxgcr,
+ ((in_be32(&qe_immr->qmx.cmxgcr) &
+ ~QE_CMXGCR_MII_ENET_MNG) |
+ (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT)));
+ spin_unlock_irqrestore(&ucc_lock, flags);
+
+ return 0;
+}
+
+int ucc_set_type(int ucc_num, struct ucc_common *regs,
+ enum ucc_speed_type speed)
+{
+ u8 guemr = 0;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ guemr = regs->guemr;
+ guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX);
+ switch (speed) {
+ case UCC_SPEED_TYPE_SLOW:
+ guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX);
+ break;
+ case UCC_SPEED_TYPE_FAST:
+ guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX);
+ break;
+ default:
+ return -EINVAL;
+ }
+ regs->guemr = guemr;
+
+ return 0;
+}
+
+int ucc_init_guemr(struct ucc_common *regs)
+{
+ u8 guemr = 0;
+
+ if (!regs)
+ return -EINVAL;
+
+ /* Set bit 3 (which is reserved in the GUEMR register) to 1 */
+ guemr = UCC_GUEMR_SET_RESERVED3;
+
+ regs->guemr = guemr;
+
+ return 0;
+}
+
+static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num,
+ u8 * shift)
+{
+ switch (ucc_num) {
+ case 0: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+ *reg_num = 1;
+ *shift = 16;
+ break;
+ case 2: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+ *reg_num = 1;
+ *shift = 0;
+ break;
+ case 4: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+ *reg_num = 2;
+ *shift = 16;
+ break;
+ case 6: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+ *reg_num = 2;
+ *shift = 0;
+ break;
+ case 1: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+ *reg_num = 3;
+ *shift = 16;
+ break;
+ case 3: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+ *reg_num = 3;
+ *shift = 0;
+ break;
+ case 5: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+ *reg_num = 4;
+ *shift = 16;
+ break;
+ case 7: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+ *reg_num = 4;
+ *shift = 0;
+ break;
+ default:
+ break;
+ }
+}
+
+int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask)
+{
+ volatile u32 *p_cmxucr;
+ u8 reg_num;
+ u8 shift;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift);
+
+ if (set)
+ out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift));
+ else
+ out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift));
+
+ return 0;
+}
+
+int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode)
+{
+ volatile u32 *p_cmxucr;
+ u8 reg_num;
+ u8 shift;
+ u32 clock_bits;
+ u32 clock_mask;
+ int source = -1;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
+ printk(KERN_ERR
+ "ucc_set_qe_mux_rxtx: bad comm mode type passed.");
+ return -EINVAL;
+ }
+
+ get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift);
+
+ switch (reg_num) {
+ case 1:
+ switch (clock) {
+ case QE_BRG1: source = 1; break;
+ case QE_BRG2: source = 2; break;
+ case QE_BRG7: source = 3; break;
+ case QE_BRG8: source = 4; break;
+ case QE_CLK9: source = 5; break;
+ case QE_CLK10: source = 6; break;
+ case QE_CLK11: source = 7; break;
+ case QE_CLK12: source = 8; break;
+ case QE_CLK15: source = 9; break;
+ case QE_CLK16: source = 10; break;
+ default: source = -1; break;
+ }
+ break;
+ case 2:
+ switch (clock) {
+ case QE_BRG5: source = 1; break;
+ case QE_BRG6: source = 2; break;
+ case QE_BRG7: source = 3; break;
+ case QE_BRG8: source = 4; break;
+ case QE_CLK13: source = 5; break;
+ case QE_CLK14: source = 6; break;
+ case QE_CLK19: source = 7; break;
+ case QE_CLK20: source = 8; break;
+ case QE_CLK15: source = 9; break;
+ case QE_CLK16: source = 10; break;
+ default: source = -1; break;
+ }
+ break;
+ case 3:
+ switch (clock) {
+ case QE_BRG9: source = 1; break;
+ case QE_BRG10: source = 2; break;
+ case QE_BRG15: source = 3; break;
+ case QE_BRG16: source = 4; break;
+ case QE_CLK3: source = 5; break;
+ case QE_CLK4: source = 6; break;
+ case QE_CLK17: source = 7; break;
+ case QE_CLK18: source = 8; break;
+ case QE_CLK7: source = 9; break;
+ case QE_CLK8: source = 10; break;
+ default: source = -1; break;
+ }
+ break;
+ case 4:
+ switch (clock) {
+ case QE_BRG13: source = 1; break;
+ case QE_BRG14: source = 2; break;
+ case QE_BRG15: source = 3; break;
+ case QE_BRG16: source = 4; break;
+ case QE_CLK5: source = 5; break;
+ case QE_CLK6: source = 6; break;
+ case QE_CLK21: source = 7; break;
+ case QE_CLK22: source = 8; break;
+ case QE_CLK7: source = 9; break;
+ case QE_CLK8: source = 10; break;
+ default: source = -1; break;
+ }
+ break;
+ default:
+ source = -1;
+ break;
+ }
+
+ if (source == -1) {
+ printk(KERN_ERR
+ "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC.");
+ return -ENOENT;
+ }
+
+ clock_bits = (u32) source;
+ clock_mask = QE_CMXUCR_TX_CLK_SRC_MASK;
+ if (mode == COMM_DIR_RX) {
+ clock_bits <<= 4; /* Rx field is 4 bits to left of Tx field */
+ clock_mask <<= 4; /* Rx field is 4 bits to left of Tx field */
+ }
+ clock_bits <<= shift;
+ clock_mask <<= shift;
+
+ out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clock_mask) | clock_bits);
+
+ return 0;
+}
--- /dev/null
+/*
+ * arch/powerpc/sysdev/qe_lib/ucc_fast.c
+ *
+ * QE UCC Fast API Set - UCC Fast specific routines implementations.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include <asm/ucc.h>
+#include <asm/ucc_fast.h>
+
+#define uccf_printk(level, format, arg...) \
+ printk(level format "\n", ## arg)
+
+#define uccf_dbg(format, arg...) \
+ uccf_printk(KERN_DEBUG , format , ## arg)
+#define uccf_err(format, arg...) \
+ uccf_printk(KERN_ERR , format , ## arg)
+#define uccf_info(format, arg...) \
+ uccf_printk(KERN_INFO , format , ## arg)
+#define uccf_warn(format, arg...) \
+ uccf_printk(KERN_WARNING , format , ## arg)
+
+#ifdef UCCF_VERBOSE_DEBUG
+#define uccf_vdbg uccf_dbg
+#else
+#define uccf_vdbg(fmt, args...) do { } while (0)
+#endif /* UCCF_VERBOSE_DEBUG */
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
+{
+ uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num);
+ uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs);
+
+ uccf_info("gumr : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+ uccf_info("upsmr : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+ uccf_info("utodr : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+ uccf_info("udsr : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+ uccf_info("ucce : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+ uccf_info("uccm : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+ uccf_info("uccs : addr - 0x%08x, val - 0x%02x",
+ (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+ uccf_info("urfb : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+ uccf_info("urfs : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+ uccf_info("urfet : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+ uccf_info("urfset: addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->urfset,
+ in_be16(&uccf->uf_regs->urfset));
+ uccf_info("utfb : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+ uccf_info("utfs : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+ uccf_info("utfet : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+ uccf_info("utftt : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+ uccf_info("utpt : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+ uccf_info("urtry : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+ uccf_info("guemr : addr - 0x%08x, val - 0x%02x",
+ (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+}
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
+{
+ switch (uccf_num) {
+ case 0: return QE_CR_SUBBLOCK_UCCFAST1;
+ case 1: return QE_CR_SUBBLOCK_UCCFAST2;
+ case 2: return QE_CR_SUBBLOCK_UCCFAST3;
+ case 3: return QE_CR_SUBBLOCK_UCCFAST4;
+ case 4: return QE_CR_SUBBLOCK_UCCFAST5;
+ case 5: return QE_CR_SUBBLOCK_UCCFAST6;
+ case 6: return QE_CR_SUBBLOCK_UCCFAST7;
+ case 7: return QE_CR_SUBBLOCK_UCCFAST8;
+ default: return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
+{
+ out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+}
+
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
+{
+ struct ucc_fast *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr |= UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr |= UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 1;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
+{
+ struct ucc_fast *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr &= ~UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr &= ~UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 0;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
+{
+ struct ucc_fast_private *uccf;
+ struct ucc_fast *uf_regs;
+ u32 gumr = 0;
+ int ret;
+
+ uccf_vdbg("%s: IN", __FUNCTION__);
+
+ if (!uf_info)
+ return -EINVAL;
+
+ /* check if the UCC port number is in range. */
+ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
+ uccf_err("ucc_fast_init: Illagal UCC number!");
+ return -EINVAL;
+ }
+
+ /* Check that 'max_rx_buf_length' is properly aligned (4). */
+ if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
+ uccf_err("ucc_fast_init: max_rx_buf_length not aligned.");
+ return -EINVAL;
+ }
+
+ /* Validate Virtual Fifo register values */
+ if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfs too small.");
+ return -EINVAL;
+ }
+
+ if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfs not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfet not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfset not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register utfs not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register utfet not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register utftt not aligned.");
+ return -EINVAL;
+ }
+
+ uccf = (struct ucc_fast_private *)
+ kmalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
+ if (!uccf) {
+ uccf_err
+ ("ucc_fast_init: No memory for UCC slow data structure!");
+ return -ENOMEM;
+ }
+ memset(uccf, 0, sizeof(struct ucc_fast_private));
+
+ /* Fill fast UCC structure */
+ uccf->uf_info = uf_info;
+ /* Set the PHY base address */
+ uccf->uf_regs =
+ (struct ucc_fast *) ioremap(uf_info->regs, sizeof(struct ucc_fast));
+ if (uccf->uf_regs == NULL) {
+ uccf_err
+ ("ucc_fast_init: No memory map for UCC slow controller!");
+ return -ENOMEM;
+ }
+
+ uccf->enabled_tx = 0;
+ uccf->enabled_rx = 0;
+ uccf->stopped_tx = 0;
+ uccf->stopped_rx = 0;
+ uf_regs = uccf->uf_regs;
+ uccf->p_ucce = (u32 *) & (uf_regs->ucce);
+ uccf->p_uccm = (u32 *) & (uf_regs->uccm);
+#ifdef STATISTICS
+ uccf->tx_frames = 0;
+ uccf->rx_frames = 0;
+ uccf->rx_discarded = 0;
+#endif /* STATISTICS */
+
+ /* Init Guemr register */
+ if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) {
+ uccf_err("ucc_fast_init: Could not init the guemr register.");
+ ucc_fast_free(uccf);
+ return ret;
+ }
+
+ /* Set UCC to fast type */
+ if ((ret = ucc_set_type(uf_info->ucc_num,
+ (struct ucc_common *) (uf_regs),
+ UCC_SPEED_TYPE_FAST))) {
+ uccf_err("ucc_fast_init: Could not set type to fast.");
+ ucc_fast_free(uccf);
+ return ret;
+ }
+
+ uccf->mrblr = uf_info->max_rx_buf_length;
+
+ /* Set GUMR */
+ /* For more details see the hardware spec. */
+ /* gumr starts as zero. */
+ if (uf_info->tci)
+ gumr |= UCC_FAST_GUMR_TCI;
+ gumr |= uf_info->ttx_trx;
+ if (uf_info->cdp)
+ gumr |= UCC_FAST_GUMR_CDP;
+ if (uf_info->ctsp)
+ gumr |= UCC_FAST_GUMR_CTSP;
+ if (uf_info->cds)
+ gumr |= UCC_FAST_GUMR_CDS;
+ if (uf_info->ctss)
+ gumr |= UCC_FAST_GUMR_CTSS;
+ if (uf_info->txsy)
+ gumr |= UCC_FAST_GUMR_TXSY;
+ if (uf_info->rsyn)
+ gumr |= UCC_FAST_GUMR_RSYN;
+ gumr |= uf_info->synl;
+ if (uf_info->rtsm)
+ gumr |= UCC_FAST_GUMR_RTSM;
+ gumr |= uf_info->renc;
+ if (uf_info->revd)
+ gumr |= UCC_FAST_GUMR_REVD;
+ gumr |= uf_info->tenc;
+ gumr |= uf_info->tcrc;
+ gumr |= uf_info->mode;
+ out_be32(&uf_regs->gumr, gumr);
+
+ /* Allocate memory for Tx Virtual Fifo */
+ uccf->ucc_fast_tx_virtual_fifo_base_offset =
+ qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+ uccf_err
+ ("ucc_fast_init: Can not allocate MURAM memory for "
+ "struct ucc_fastx_virtual_fifo_base_offset.");
+ uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+ }
+
+ /* Allocate memory for Rx Virtual Fifo */
+ uccf->ucc_fast_rx_virtual_fifo_base_offset =
+ qe_muram_alloc(uf_info->urfs +
+ (u32)
+ UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+ uccf_err
+ ("ucc_fast_init: Can not allocate MURAM memory for "
+ "ucc_fast_rx_virtual_fifo_base_offset.");
+ uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+ }
+
+ /* Set Virtual Fifo registers */
+ out_be16(&uf_regs->urfs, uf_info->urfs);
+ out_be16(&uf_regs->urfet, uf_info->urfet);
+ out_be16(&uf_regs->urfset, uf_info->urfset);
+ out_be16(&uf_regs->utfs, uf_info->utfs);
+ out_be16(&uf_regs->utfet, uf_info->utfet);
+ out_be16(&uf_regs->utftt, uf_info->utftt);
+ /* utfb, urfb are offsets from MURAM base */
+ out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
+ out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ /* Mux clocking */
+ /* Grant Support */
+ ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
+ /* Breakpoint Support */
+ ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
+ /* Set Tsa or NMSI mode. */
+ ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
+ /* If NMSI (not Tsa), set Tx and Rx clock. */
+ if (!uf_info->tsa) {
+ /* Rx clock routing */
+ if (uf_info->rx_clock != QE_CLK_NONE) {
+ if (ucc_set_qe_mux_rxtx
+ (uf_info->ucc_num, uf_info->rx_clock,
+ COMM_DIR_RX)) {
+ uccf_err
+ ("ucc_fast_init: Illegal value for parameter 'RxClock'.");
+ ucc_fast_free(uccf);
+ return -EINVAL;
+ }
+ }
+ /* Tx clock routing */
+ if (uf_info->tx_clock != QE_CLK_NONE) {
+ if (ucc_set_qe_mux_rxtx
+ (uf_info->ucc_num, uf_info->tx_clock,
+ COMM_DIR_TX)) {
+ uccf_err
+ ("ucc_fast_init: Illegal value for parameter 'TxClock'.");
+ ucc_fast_free(uccf);
+ return -EINVAL;
+ }
+ }
+ }
+
+ /* Set interrupt mask register at UCC level. */
+ out_be32(&uf_regs->uccm, uf_info->uccm_mask);
+
+ /* First, clear anything pending at UCC level,
+ * otherwise, old garbage may come through
+ * as soon as the dam is opened
+ * Writing '1' clears
+ */
+ out_be32(&uf_regs->ucce, 0xffffffff);
+
+ *uccf_ret = uccf;
+ return 0;
+}
+
+void ucc_fast_free(struct ucc_fast_private * uccf)
+{
+ if (!uccf)
+ return;
+
+ if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
+ qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
+
+ if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
+ qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ kfree(uccf);
+}
--- /dev/null
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE UCC Slow API Set - UCC Slow specific routines implementations.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include <asm/ucc.h>
+#include <asm/ucc_slow.h>
+
+#define uccs_printk(level, format, arg...) \
+ printk(level format "\n", ## arg)
+
+#define uccs_dbg(format, arg...) \
+ uccs_printk(KERN_DEBUG , format , ## arg)
+#define uccs_err(format, arg...) \
+ uccs_printk(KERN_ERR , format , ## arg)
+#define uccs_info(format, arg...) \
+ uccs_printk(KERN_INFO , format , ## arg)
+#define uccs_warn(format, arg...) \
+ uccs_printk(KERN_WARNING , format , ## arg)
+
+#ifdef UCCS_VERBOSE_DEBUG
+#define uccs_vdbg uccs_dbg
+#else
+#define uccs_vdbg(fmt, args...) do { } while (0)
+#endif /* UCCS_VERBOSE_DEBUG */
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
+{
+ switch (uccs_num) {
+ case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
+ case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
+ case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
+ case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
+ case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
+ case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
+ case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
+ case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
+ default: return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+
+void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
+{
+ out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD);
+}
+
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
+{
+ struct ucc_slow_info *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
+ QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
+{
+ struct ucc_slow_info *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
+{
+ struct ucc_slow_info *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
+{
+ struct ucc_slow *us_regs;
+ u32 gumr_l;
+
+ us_regs = uccs->us_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr_l = in_be32(&us_regs->gumr_l);
+ if (mode & COMM_DIR_TX) {
+ gumr_l |= UCC_SLOW_GUMR_L_ENT;
+ uccs->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr_l |= UCC_SLOW_GUMR_L_ENR;
+ uccs->enabled_rx = 1;
+ }
+ out_be32(&us_regs->gumr_l, gumr_l);
+}
+
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
+{
+ struct ucc_slow *us_regs;
+ u32 gumr_l;
+
+ us_regs = uccs->us_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr_l = in_be32(&us_regs->gumr_l);
+ if (mode & COMM_DIR_TX) {
+ gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
+ uccs->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
+ uccs->enabled_rx = 0;
+ }
+ out_be32(&us_regs->gumr_l, gumr_l);
+}
+
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
+{
+ u32 i;
+ struct ucc_slow *us_regs;
+ u32 gumr;
+ u8 function_code = 0;
+ u8 *bd;
+ struct ucc_slow_private *uccs;
+ u32 id;
+ u32 command;
+ int ret;
+
+ uccs_vdbg("%s: IN", __FUNCTION__);
+
+ if (!us_info)
+ return -EINVAL;
+
+ /* check if the UCC port number is in range. */
+ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
+ uccs_err("ucc_slow_init: Illagal UCC number!");
+ return -EINVAL;
+ }
+
+ /*
+ * Set mrblr
+ * Check that 'max_rx_buf_length' is properly aligned (4), unless
+ * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
+ * case when QE accepts 32 bits at a time.
+ */
+ if ((!us_info->rfw) &&
+ (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
+ uccs_err("max_rx_buf_length not aligned.");
+ return -EINVAL;
+ }
+
+ uccs = (struct ucc_slow_private *)
+ kmalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
+ if (!uccs) {
+ uccs_err
+ ("ucc_slow_init: No memory for UCC slow data structure!");
+ return -ENOMEM;
+ }
+ memset(uccs, 0, sizeof(struct ucc_slow_private));
+
+ /* Fill slow UCC structure */
+ uccs->us_info = us_info;
+ uccs->saved_uccm = 0;
+ uccs->p_rx_frame = 0;
+ uccs->us_regs = us_info->us_regs;
+ us_regs = uccs->us_regs;
+ uccs->p_ucce = (u16 *) & (us_regs->ucce);
+ uccs->p_uccm = (u16 *) & (us_regs->uccm);
+#ifdef STATISTICS
+ uccs->rx_frames = 0;
+ uccs->tx_frames = 0;
+ uccs->rx_discarded = 0;
+#endif /* STATISTICS */
+
+ /* Get PRAM base */
+ uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE,
+ ALIGNMENT_OF_UCC_SLOW_PRAM);
+ if (IS_MURAM_ERR(uccs->us_pram_offset)) {
+ uccs_err
+ ("ucc_slow_init: Can not allocate MURAM memory "
+ "for Slow UCC.");
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
+ (u32) uccs->us_pram_offset);
+
+ uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
+
+ /* Init Guemr register */
+ if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) {
+ uccs_err("ucc_slow_init: Could not init the guemr register.");
+ ucc_slow_free(uccs);
+ return ret;
+ }
+
+ /* Set UCC to slow type */
+ if ((ret = ucc_set_type(us_info->ucc_num,
+ (struct ucc_common *) (us_info->us_regs),
+ UCC_SPEED_TYPE_SLOW))) {
+ uccs_err("ucc_slow_init: Could not init the guemr register.");
+ ucc_slow_free(uccs);
+ return ret;
+ }
+
+ out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
+
+ INIT_LIST_HEAD(&uccs->confQ);
+
+ /* Allocate BDs. */
+ uccs->rx_base_offset =
+ qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
+ QE_ALIGNMENT_OF_BD);
+ if (IS_MURAM_ERR(uccs->rx_base_offset)) {
+ uccs_err("ucc_slow_init: No memory for Rx BD's.");
+ uccs->rx_base_offset = 0;
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+
+ uccs->tx_base_offset =
+ qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
+ QE_ALIGNMENT_OF_BD);
+ if (IS_MURAM_ERR(uccs->tx_base_offset)) {
+ uccs_err("ucc_slow_init: No memory for Tx BD's.");
+ uccs->tx_base_offset = 0;
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+
+ /* Init Tx bds */
+ bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
+ for (i = 0; i < us_info->tx_bd_ring_len; i++) {
+ /* clear bd buffer */
+ out_be32(&(((struct qe_bd *)bd)->buf), 0);
+ /* set bd status and length */
+ out_be32((u32*)bd, 0);
+ bd += sizeof(struct qe_bd);
+ }
+ bd -= sizeof(struct qe_bd);
+ /* set bd status and length */
+ out_be32((u32*)bd, T_W); /* for last BD set Wrap bit */
+
+ /* Init Rx bds */
+ bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
+ for (i = 0; i < us_info->rx_bd_ring_len; i++) {
+ /* set bd status and length */
+ out_be32((u32*)bd, 0);
+ /* clear bd buffer */
+ out_be32(&(((struct qe_bd *)bd)->buf), 0);
+ bd += sizeof(struct qe_bd);
+ }
+ bd -= sizeof(struct qe_bd);
+ /* set bd status and length */
+ out_be32((u32*)bd, R_W); /* for last BD set Wrap bit */
+
+ /* Set GUMR (For more details see the hardware spec.). */
+ /* gumr_h */
+ gumr = 0;
+ gumr |= us_info->tcrc;
+ if (us_info->cdp)
+ gumr |= UCC_SLOW_GUMR_H_CDP;
+ if (us_info->ctsp)
+ gumr |= UCC_SLOW_GUMR_H_CTSP;
+ if (us_info->cds)
+ gumr |= UCC_SLOW_GUMR_H_CDS;
+ if (us_info->ctss)
+ gumr |= UCC_SLOW_GUMR_H_CTSS;
+ if (us_info->tfl)
+ gumr |= UCC_SLOW_GUMR_H_TFL;
+ if (us_info->rfw)
+ gumr |= UCC_SLOW_GUMR_H_RFW;
+ if (us_info->txsy)
+ gumr |= UCC_SLOW_GUMR_H_TXSY;
+ if (us_info->rtsm)
+ gumr |= UCC_SLOW_GUMR_H_RTSM;
+ out_be32(&us_regs->gumr_h, gumr);
+
+ /* gumr_l */
+ gumr = 0;
+ if (us_info->tci)
+ gumr |= UCC_SLOW_GUMR_L_TCI;
+ if (us_info->rinv)
+ gumr |= UCC_SLOW_GUMR_L_RINV;
+ if (us_info->tinv)
+ gumr |= UCC_SLOW_GUMR_L_TINV;
+ if (us_info->tend)
+ gumr |= UCC_SLOW_GUMR_L_TEND;
+ gumr |= us_info->tdcr;
+ gumr |= us_info->rdcr;
+ gumr |= us_info->tenc;
+ gumr |= us_info->renc;
+ gumr |= us_info->diag;
+ gumr |= us_info->mode;
+ out_be32(&us_regs->gumr_l, gumr);
+
+ /* Function code registers */
+ /* function_code has initial value 0 */
+
+ /* if the data is in cachable memory, the 'global' */
+ /* in the function code should be set. */
+ function_code |= us_info->data_mem_part;
+ function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */
+ uccs->us_pram->tfcr = function_code;
+ uccs->us_pram->rfcr = function_code;
+
+ /* rbase, tbase are offsets from MURAM base */
+ out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
+ out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);
+
+ /* Mux clocking */
+ /* Grant Support */
+ ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
+ /* Breakpoint Support */
+ ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
+ /* Set Tsa or NMSI mode. */
+ ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
+ /* If NMSI (not Tsa), set Tx and Rx clock. */
+ if (!us_info->tsa) {
+ /* Rx clock routing */
+ if (ucc_set_qe_mux_rxtx
+ (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) {
+ uccs_err
+ ("ucc_slow_init: Illegal value for parameter"
+ " 'RxClock'.");
+ ucc_slow_free(uccs);
+ return -EINVAL;
+ }
+ /* Tx clock routing */
+ if (ucc_set_qe_mux_rxtx(us_info->ucc_num,
+ us_info->tx_clock, COMM_DIR_TX)) {
+ uccs_err
+ ("ucc_slow_init: Illegal value for parameter "
+ "'TxClock'.");
+ ucc_slow_free(uccs);
+ return -EINVAL;
+ }
+ }
+
+ /*
+ * INTERRUPTS
+ */
+ /* Set interrupt mask register at UCC level. */
+ out_be16(&us_regs->uccm, us_info->uccm_mask);
+
+ /* First, clear anything pending at UCC level, */
+ /* otherwise, old garbage may come through */
+ /* as soon as the dam is opened. */
+
+ /* Writing '1' clears */
+ out_be16(&us_regs->ucce, 0xffff);
+
+ /* Issue QE Init command */
+ if (us_info->init_tx && us_info->init_rx)
+ command = QE_INIT_TX_RX;
+ else if (us_info->init_tx)
+ command = QE_INIT_TX;
+ else
+ command = QE_INIT_RX; /* We know at least one is TRUE */
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ *uccs_ret = uccs;
+ return 0;
+}
+
+void ucc_slow_free(struct ucc_slow_private * uccs)
+{
+ if (!uccs)
+ return;
+
+ if (uccs->rx_base_offset)
+ qe_muram_free(uccs->rx_base_offset);
+
+ if (uccs->tx_base_offset)
+ qe_muram_free(uccs->tx_base_offset);
+
+ if (uccs->us_pram) {
+ qe_muram_free(uccs->us_pram_offset);
+ uccs->us_pram = NULL;
+ }
+
+ kfree(uccs);
+}
--- /dev/null
+/*
+ * include/asm-powerpc/immap_qe.h
+ *
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+
+ * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_IMMAP_QE_H
+#define _ASM_POWERPC_IMMAP_QE_H
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+
+#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */
+
+/* QE I-RAM */
+struct qe_iram {
+ __be32 iadd; /* I-RAM Address Register */
+ __be32 idata; /* I-RAM Data Register */
+ u8 res0[0x78];
+} __attribute__ ((packed));
+
+/* QE Interrupt Controller */
+struct qe_ic_regs {
+ __be32 qicr;
+ __be32 qivec;
+ __be32 qripnr;
+ __be32 qipnr;
+ __be32 qipxcc;
+ __be32 qipycc;
+ __be32 qipwcc;
+ __be32 qipzcc;
+ __be32 qimr;
+ __be32 qrimr;
+ __be32 qicnr;
+ u8 res0[0x4];
+ __be32 qiprta;
+ __be32 qiprtb;
+ u8 res1[0x4];
+ __be32 qricr;
+ u8 res2[0x20];
+ __be32 qhivec;
+ u8 res3[0x1C];
+} __attribute__ ((packed));
+
+/* Communications Processor */
+struct cp_qe {
+ __be32 cecr; /* QE command register */
+ __be32 ceccr; /* QE controller configuration register */
+ __be32 cecdr; /* QE command data register */
+ u8 res0[0xA];
+ __be16 ceter; /* QE timer event register */
+ u8 res1[0x2];
+ __be16 cetmr; /* QE timers mask register */
+ __be32 cetscr; /* QE time-stamp timer control register */
+ __be32 cetsr1; /* QE time-stamp register 1 */
+ __be32 cetsr2; /* QE time-stamp register 2 */
+ u8 res2[0x8];
+ __be32 cevter; /* QE virtual tasks event register */
+ __be32 cevtmr; /* QE virtual tasks mask register */
+ __be16 cercr; /* QE RAM control register */
+ u8 res3[0x2];
+ u8 res4[0x24];
+ __be16 ceexe1; /* QE external request 1 event register */
+ u8 res5[0x2];
+ __be16 ceexm1; /* QE external request 1 mask register */
+ u8 res6[0x2];
+ __be16 ceexe2; /* QE external request 2 event register */
+ u8 res7[0x2];
+ __be16 ceexm2; /* QE external request 2 mask register */
+ u8 res8[0x2];
+ __be16 ceexe3; /* QE external request 3 event register */
+ u8 res9[0x2];
+ __be16 ceexm3; /* QE external request 3 mask register */
+ u8 res10[0x2];
+ __be16 ceexe4; /* QE external request 4 event register */
+ u8 res11[0x2];
+ __be16 ceexm4; /* QE external request 4 mask register */
+ u8 res12[0x2];
+ u8 res13[0x280];
+} __attribute__ ((packed));
+
+/* QE Multiplexer */
+struct qe_mux {
+ __be32 cmxgcr; /* CMX general clock route register */
+ __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */
+ __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */
+ __be32 cmxsi1syr; /* CMX SI1 SYNC route register */
+ __be32 cmxucr1; /* CMX UCC1, UCC3 clock route register */
+ __be32 cmxucr2; /* CMX UCC5, UCC7 clock route register */
+ __be32 cmxucr3; /* CMX UCC2, UCC4 clock route register */
+ __be32 cmxucr4; /* CMX UCC6, UCC8 clock route register */
+ __be32 cmxupcr; /* CMX UPC clock route register */
+ u8 res0[0x1C];
+} __attribute__ ((packed));
+
+/* QE Timers */
+struct qe_timers {
+ u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/
+ u8 res0[0x3];
+ u8 gtcfr2; /* Timer 3 and timer 4 global config register*/
+ u8 res1[0xB];
+ __be16 gtmdr1; /* Timer 1 mode register */
+ __be16 gtmdr2; /* Timer 2 mode register */
+ __be16 gtrfr1; /* Timer 1 reference register */
+ __be16 gtrfr2; /* Timer 2 reference register */
+ __be16 gtcpr1; /* Timer 1 capture register */
+ __be16 gtcpr2; /* Timer 2 capture register */
+ __be16 gtcnr1; /* Timer 1 counter */
+ __be16 gtcnr2; /* Timer 2 counter */
+ __be16 gtmdr3; /* Timer 3 mode register */
+ __be16 gtmdr4; /* Timer 4 mode register */
+ __be16 gtrfr3; /* Timer 3 reference register */
+ __be16 gtrfr4; /* Timer 4 reference register */
+ __be16 gtcpr3; /* Timer 3 capture register */
+ __be16 gtcpr4; /* Timer 4 capture register */
+ __be16 gtcnr3; /* Timer 3 counter */
+ __be16 gtcnr4; /* Timer 4 counter */
+ __be16 gtevr1; /* Timer 1 event register */
+ __be16 gtevr2; /* Timer 2 event register */
+ __be16 gtevr3; /* Timer 3 event register */
+ __be16 gtevr4; /* Timer 4 event register */
+ __be16 gtps; /* Timer 1 prescale register */
+ u8 res2[0x46];
+} __attribute__ ((packed));
+
+/* BRG */
+struct qe_brg {
+ __be32 brgc1; /* BRG1 configuration register */
+ __be32 brgc2; /* BRG2 configuration register */
+ __be32 brgc3; /* BRG3 configuration register */
+ __be32 brgc4; /* BRG4 configuration register */
+ __be32 brgc5; /* BRG5 configuration register */
+ __be32 brgc6; /* BRG6 configuration register */
+ __be32 brgc7; /* BRG7 configuration register */
+ __be32 brgc8; /* BRG8 configuration register */
+ __be32 brgc9; /* BRG9 configuration register */
+ __be32 brgc10; /* BRG10 configuration register */
+ __be32 brgc11; /* BRG11 configuration register */
+ __be32 brgc12; /* BRG12 configuration register */
+ __be32 brgc13; /* BRG13 configuration register */
+ __be32 brgc14; /* BRG14 configuration register */
+ __be32 brgc15; /* BRG15 configuration register */
+ __be32 brgc16; /* BRG16 configuration register */
+ u8 res0[0x40];
+} __attribute__ ((packed));
+
+/* SPI */
+struct spi {
+ u8 res0[0x20];
+ __be32 spmode; /* SPI mode register */
+ u8 res1[0x2];
+ u8 spie; /* SPI event register */
+ u8 res2[0x1];
+ u8 res3[0x2];
+ u8 spim; /* SPI mask register */
+ u8 res4[0x1];
+ u8 res5[0x1];
+ u8 spcom; /* SPI command register */
+ u8 res6[0x2];
+ __be32 spitd; /* SPI transmit data register (cpu mode) */
+ __be32 spird; /* SPI receive data register (cpu mode) */
+ u8 res7[0x8];
+} __attribute__ ((packed));
+
+/* SI */
+struct si1 {
+ __be16 siamr1; /* SI1 TDMA mode register */
+ __be16 sibmr1; /* SI1 TDMB mode register */
+ __be16 sicmr1; /* SI1 TDMC mode register */
+ __be16 sidmr1; /* SI1 TDMD mode register */
+ u8 siglmr1_h; /* SI1 global mode register high */
+ u8 res0[0x1];
+ u8 sicmdr1_h; /* SI1 command register high */
+ u8 res2[0x1];
+ u8 sistr1_h; /* SI1 status register high */
+ u8 res3[0x1];
+ __be16 sirsr1_h; /* SI1 RAM shadow address register high */
+ u8 sitarc1; /* SI1 RAM counter Tx TDMA */
+ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
+ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
+ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
+ u8 sirarc1; /* SI1 RAM counter Rx TDMA */
+ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
+ u8 sircrc1; /* SI1 RAM counter Rx TDMC */
+ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
+ u8 res4[0x8];
+ __be16 siemr1; /* SI1 TDME mode register 16 bits */
+ __be16 sifmr1; /* SI1 TDMF mode register 16 bits */
+ __be16 sigmr1; /* SI1 TDMG mode register 16 bits */
+ __be16 sihmr1; /* SI1 TDMH mode register 16 bits */
+ u8 siglmg1_l; /* SI1 global mode register low 8 bits */
+ u8 res5[0x1];
+ u8 sicmdr1_l; /* SI1 command register low 8 bits */
+ u8 res6[0x1];
+ u8 sistr1_l; /* SI1 status register low 8 bits */
+ u8 res7[0x1];
+ __be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/
+ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
+ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
+ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
+ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
+ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
+ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
+ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
+ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
+ u8 res8[0x8];
+ __be32 siml1; /* SI1 multiframe limit register */
+ u8 siedm1; /* SI1 extended diagnostic mode register */
+ u8 res9[0xBB];
+} __attribute__ ((packed));
+
+/* SI Routing Tables */
+struct sir {
+ u8 tx[0x400];
+ u8 rx[0x400];
+ u8 res0[0x800];
+} __attribute__ ((packed));
+
+/* USB Controller */
+struct usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ __be16 usb_usep1;
+ __be16 usb_usep2;
+ __be16 usb_usep3;
+ __be16 usb_usep4;
+ u8 res2[4];
+ __be16 usb_usber;
+ u8 res3[2];
+ __be16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ __be16 usb_ussft;
+ u8 res5[2];
+ __be16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed));
+
+/* MCC */
+struct mcc {
+ __be32 mcce; /* MCC event register */
+ __be32 mccm; /* MCC mask register */
+ __be32 mccf; /* MCC configuration register */
+ __be32 merl; /* MCC emergency request level register */
+ u8 res0[0xF0];
+} __attribute__ ((packed));
+
+/* QE UCC Slow */
+struct ucc_slow {
+ __be32 gumr_l; /* UCCx general mode register (low) */
+ __be32 gumr_h; /* UCCx general mode register (high) */
+ __be16 upsmr; /* UCCx protocol-specific mode register */
+ u8 res0[0x2];
+ __be16 utodr; /* UCCx transmit on demand register */
+ __be16 udsr; /* UCCx data synchronization register */
+ __be16 ucce; /* UCCx event register */
+ u8 res1[0x2];
+ __be16 uccm; /* UCCx mask register */
+ u8 res2[0x1];
+ u8 uccs; /* UCCx status register */
+ u8 res3[0x24];
+ __be16 utpt;
+ u8 guemr; /* UCC general extended mode register */
+ u8 res4[0x200 - 0x091];
+} __attribute__ ((packed));
+
+/* QE UCC Fast */
+struct ucc_fast {
+ __be32 gumr; /* UCCx general mode register */
+ __be32 upsmr; /* UCCx protocol-specific mode register */
+ __be16 utodr; /* UCCx transmit on demand register */
+ u8 res0[0x2];
+ __be16 udsr; /* UCCx data synchronization register */
+ u8 res1[0x2];
+ __be32 ucce; /* UCCx event register */
+ __be32 uccm; /* UCCx mask register */
+ u8 uccs; /* UCCx status register */
+ u8 res2[0x7];
+ __be32 urfb; /* UCC receive FIFO base */
+ __be16 urfs; /* UCC receive FIFO size */
+ u8 res3[0x2];
+ __be16 urfet; /* UCC receive FIFO emergency threshold */
+ __be16 urfset; /* UCC receive FIFO special emergency
+ threshold */
+ __be32 utfb; /* UCC transmit FIFO base */
+ __be16 utfs; /* UCC transmit FIFO size */
+ u8 res4[0x2];
+ __be16 utfet; /* UCC transmit FIFO emergency threshold */
+ u8 res5[0x2];
+ __be16 utftt; /* UCC transmit FIFO transmit threshold */
+ u8 res6[0x2];
+ __be16 utpt; /* UCC transmit polling timer */
+ u8 res7[0x2];
+ __be32 urtry; /* UCC retry counter register */
+ u8 res8[0x4C];
+ u8 guemr; /* UCC general extended mode register */
+ u8 res9[0x100 - 0x091];
+} __attribute__ ((packed));
+
+/* QE UCC */
+struct ucc_common {
+ u8 res1[0x90];
+ u8 guemr;
+ u8 res2[0x200 - 0x091];
+} __attribute__ ((packed));
+
+struct ucc {
+ union {
+ struct ucc_slow slow;
+ struct ucc_fast fast;
+ struct ucc_common common;
+ };
+} __attribute__ ((packed));
+
+/* MultiPHY UTOPIA POS Controllers (UPC) */
+struct upc {
+ __be32 upgcr; /* UTOPIA/POS general configuration register */
+ __be32 uplpa; /* UTOPIA/POS last PHY address */
+ __be32 uphec; /* ATM HEC register */
+ __be32 upuc; /* UTOPIA/POS UCC configuration */
+ __be32 updc1; /* UTOPIA/POS device 1 configuration */
+ __be32 updc2; /* UTOPIA/POS device 2 configuration */
+ __be32 updc3; /* UTOPIA/POS device 3 configuration */
+ __be32 updc4; /* UTOPIA/POS device 4 configuration */
+ __be32 upstpa; /* UTOPIA/POS STPA threshold */
+ u8 res0[0xC];
+ __be32 updrs1_h; /* UTOPIA/POS device 1 rate select */
+ __be32 updrs1_l; /* UTOPIA/POS device 1 rate select */
+ __be32 updrs2_h; /* UTOPIA/POS device 2 rate select */
+ __be32 updrs2_l; /* UTOPIA/POS device 2 rate select */
+ __be32 updrs3_h; /* UTOPIA/POS device 3 rate select */
+ __be32 updrs3_l; /* UTOPIA/POS device 3 rate select */
+ __be32 updrs4_h; /* UTOPIA/POS device 4 rate select */
+ __be32 updrs4_l; /* UTOPIA/POS device 4 rate select */
+ __be32 updrp1; /* UTOPIA/POS device 1 receive priority low */
+ __be32 updrp2; /* UTOPIA/POS device 2 receive priority low */
+ __be32 updrp3; /* UTOPIA/POS device 3 receive priority low */
+ __be32 updrp4; /* UTOPIA/POS device 4 receive priority low */
+ __be32 upde1; /* UTOPIA/POS device 1 event */
+ __be32 upde2; /* UTOPIA/POS device 2 event */
+ __be32 upde3; /* UTOPIA/POS device 3 event */
+ __be32 upde4; /* UTOPIA/POS device 4 event */
+ __be16 uprp1;
+ __be16 uprp2;
+ __be16 uprp3;
+ __be16 uprp4;
+ u8 res1[0x8];
+ __be16 uptirr1_0; /* Device 1 transmit internal rate 0 */
+ __be16 uptirr1_1; /* Device 1 transmit internal rate 1 */
+ __be16 uptirr1_2; /* Device 1 transmit internal rate 2 */
+ __be16 uptirr1_3; /* Device 1 transmit internal rate 3 */
+ __be16 uptirr2_0; /* Device 2 transmit internal rate 0 */
+ __be16 uptirr2_1; /* Device 2 transmit internal rate 1 */
+ __be16 uptirr2_2; /* Device 2 transmit internal rate 2 */
+ __be16 uptirr2_3; /* Device 2 transmit internal rate 3 */
+ __be16 uptirr3_0; /* Device 3 transmit internal rate 0 */
+ __be16 uptirr3_1; /* Device 3 transmit internal rate 1 */
+ __be16 uptirr3_2; /* Device 3 transmit internal rate 2 */
+ __be16 uptirr3_3; /* Device 3 transmit internal rate 3 */
+ __be16 uptirr4_0; /* Device 4 transmit internal rate 0 */
+ __be16 uptirr4_1; /* Device 4 transmit internal rate 1 */
+ __be16 uptirr4_2; /* Device 4 transmit internal rate 2 */
+ __be16 uptirr4_3; /* Device 4 transmit internal rate 3 */
+ __be32 uper1; /* Device 1 port enable register */
+ __be32 uper2; /* Device 2 port enable register */
+ __be32 uper3; /* Device 3 port enable register */
+ __be32 uper4; /* Device 4 port enable register */
+ u8 res2[0x150];
+} __attribute__ ((packed));
+
+/* SDMA */
+struct sdma {
+ __be32 sdsr; /* Serial DMA status register */
+ __be32 sdmr; /* Serial DMA mode register */
+ __be32 sdtr1; /* SDMA system bus threshold register */
+ __be32 sdtr2; /* SDMA secondary bus threshold register */
+ __be32 sdhy1; /* SDMA system bus hysteresis register */
+ __be32 sdhy2; /* SDMA secondary bus hysteresis register */
+ __be32 sdta1; /* SDMA system bus address register */
+ __be32 sdta2; /* SDMA secondary bus address register */
+ __be32 sdtm1; /* SDMA system bus MSNUM register */
+ __be32 sdtm2; /* SDMA secondary bus MSNUM register */
+ u8 res0[0x10];
+ __be32 sdaqr; /* SDMA address bus qualify register */
+ __be32 sdaqmr; /* SDMA address bus qualify mask register */
+ u8 res1[0x4];
+ __be32 sdebcr; /* SDMA CAM entries base register */
+ u8 res2[0x38];
+} __attribute__ ((packed));
+
+/* Debug Space */
+struct dbg {
+ __be32 bpdcr; /* Breakpoint debug command register */
+ __be32 bpdsr; /* Breakpoint debug status register */
+ __be32 bpdmr; /* Breakpoint debug mask register */
+ __be32 bprmrr0; /* Breakpoint request mode risc register 0 */
+ __be32 bprmrr1; /* Breakpoint request mode risc register 1 */
+ u8 res0[0x8];
+ __be32 bprmtr0; /* Breakpoint request mode trb register 0 */
+ __be32 bprmtr1; /* Breakpoint request mode trb register 1 */
+ u8 res1[0x8];
+ __be32 bprmir; /* Breakpoint request mode immediate register */
+ __be32 bprmsr; /* Breakpoint request mode serial register */
+ __be32 bpemr; /* Breakpoint exit mode register */
+ u8 res2[0x48];
+} __attribute__ ((packed));
+
+/* RISC Special Registers (Trap and Breakpoint) */
+struct rsp {
+ u8 fixme[0x100];
+} __attribute__ ((packed));
+
+struct qe_immap {
+ struct qe_iram iram; /* I-RAM */
+ struct qe_ic_regs ic; /* Interrupt Controller */
+ struct cp_qe cp; /* Communications Processor */
+ struct qe_mux qmx; /* QE Multiplexer */
+ struct qe_timers qet; /* QE Timers */
+ struct spi spi[0x2]; /* spi */
+ struct mcc mcc; /* mcc */
+ struct qe_brg brg; /* brg */
+ struct usb_ctlr usb; /* USB */
+ struct si1 si1; /* SI */
+ u8 res11[0x800];
+ struct sir sir; /* SI Routing Tables */
+ struct ucc ucc1; /* ucc1 */
+ struct ucc ucc3; /* ucc3 */
+ struct ucc ucc5; /* ucc5 */
+ struct ucc ucc7; /* ucc7 */
+ u8 res12[0x600];
+ struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/
+ struct ucc ucc2; /* ucc2 */
+ struct ucc ucc4; /* ucc4 */
+ struct ucc ucc6; /* ucc6 */
+ struct ucc ucc8; /* ucc8 */
+ u8 res13[0x600];
+ struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/
+ struct sdma sdma; /* SDMA */
+ struct dbg dbg; /* Debug Space */
+ struct rsp rsp[0x2]; /* RISC Special Registers
+ (Trap and Breakpoint) */
+ u8 res14[0x300];
+ u8 res15[0x3A00];
+ u8 res16[0x8000]; /* 0x108000 - 0x110000 */
+ u8 muram[0xC000]; /* 0x110000 - 0x11C000
+ Multi-user RAM */
+ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
+ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
+} __attribute__ ((packed));
+
+extern struct qe_immap *qe_immr;
+extern phys_addr_t get_qe_base(void);
+
+static inline unsigned long immrbar_virt_to_phys(volatile void * address)
+{
+ if ( ((u32)address >= (u32)qe_immr) &&
+ ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
+ return (unsigned long)(address - (u32)qe_immr +
+ (u32)get_qe_base());
+ return (unsigned long)virt_to_phys(address);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_IMMAP_QE_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_H
+#define _ASM_POWERPC_QE_H
+#ifdef __KERNEL__
+
+#include <asm/immap_qe.h>
+
+#define QE_NUM_OF_SNUM 28
+#define QE_NUM_OF_BRGS 16
+#define QE_NUM_OF_PORTS 1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM 0
+#define MEM_PART_SECONDARY 1
+#define MEM_PART_MURAM 2
+
+/* Export QE common operations */
+extern void qe_reset(void);
+extern int par_io_init(struct device_node *np);
+extern int par_io_of_config(struct device_node *np);
+
+/* QE internal API */
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+void qe_setbrg(u32 brg, u32 rate);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+u32 qe_muram_alloc(u32 size, u32 align);
+int qe_muram_free(u32 offset);
+u32 qe_muram_alloc_fixed(u32 offset, u32 size);
+void qe_muram_dump(void);
+void *qe_muram_addr(u32 offset);
+
+/* Buffer descriptors */
+struct qe_bd {
+ u16 status;
+ u16 length;
+ u32 buf;
+} __attribute__ ((packed));
+
+#define BD_STATUS_MASK 0xffff0000
+#define BD_LENGTH_MASK 0x0000ffff
+
+/* Alignment */
+#define QE_INTR_TABLE_ALIGN 16 /* ??? */
+#define QE_ALIGNMENT_OF_BD 8
+#define QE_ALIGNMENT_OF_PRAM 64
+
+/* RISC allocation */
+enum qe_risc_allocation {
+ QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */
+ QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */
+ QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose
+ RISC 1 or RISC 2 */
+};
+
+/* QE extended filtering Table Lookup Key Size */
+enum qe_fltr_tbl_lookup_key_size {
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = 0x3f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 8 bytes */
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = 0x5f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 16 bytes */
+};
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size */
+enum qe_fltr_largest_external_tbl_lookup_key_size {
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+ = 0x0,/* not used */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */
+};
+
+/* structure representing QE parameter RAM */
+struct qe_timer_tables {
+ u16 tm_base; /* QE timer table base adr */
+ u16 tm_ptr; /* QE timer table pointer */
+ u16 r_tmr; /* QE timer mode register */
+ u16 r_tmv; /* QE timer valid register */
+ u32 tm_cmd; /* QE timer cmd register */
+ u32 tm_cnt; /* QE timer internal cnt */
+} __attribute__ ((packed));
+
+#define QE_FLTR_TAD_SIZE 8
+
+/* QE extended filtering Termination Action Descriptor (TAD) */
+struct qe_fltr_tad {
+ u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed));
+
+/* Communication Direction */
+enum comm_dir {
+ COMM_DIR_NONE = 0,
+ COMM_DIR_RX = 1,
+ COMM_DIR_TX = 2,
+ COMM_DIR_RX_AND_TX = 3
+};
+
+/* Clocks and BRGs */
+enum qe_clock {
+ QE_CLK_NONE = 0,
+ QE_BRG1, /* Baud Rate Generator 1 */
+ QE_BRG2, /* Baud Rate Generator 2 */
+ QE_BRG3, /* Baud Rate Generator 3 */
+ QE_BRG4, /* Baud Rate Generator 4 */
+ QE_BRG5, /* Baud Rate Generator 5 */
+ QE_BRG6, /* Baud Rate Generator 6 */
+ QE_BRG7, /* Baud Rate Generator 7 */
+ QE_BRG8, /* Baud Rate Generator 8 */
+ QE_BRG9, /* Baud Rate Generator 9 */
+ QE_BRG10, /* Baud Rate Generator 10 */
+ QE_BRG11, /* Baud Rate Generator 11 */
+ QE_BRG12, /* Baud Rate Generator 12 */
+ QE_BRG13, /* Baud Rate Generator 13 */
+ QE_BRG14, /* Baud Rate Generator 14 */
+ QE_BRG15, /* Baud Rate Generator 15 */
+ QE_BRG16, /* Baud Rate Generator 16 */
+ QE_CLK1, /* Clock 1 */
+ QE_CLK2, /* Clock 2 */
+ QE_CLK3, /* Clock 3 */
+ QE_CLK4, /* Clock 4 */
+ QE_CLK5, /* Clock 5 */
+ QE_CLK6, /* Clock 6 */
+ QE_CLK7, /* Clock 7 */
+ QE_CLK8, /* Clock 8 */
+ QE_CLK9, /* Clock 9 */
+ QE_CLK10, /* Clock 10 */
+ QE_CLK11, /* Clock 11 */
+ QE_CLK12, /* Clock 12 */
+ QE_CLK13, /* Clock 13 */
+ QE_CLK14, /* Clock 14 */
+ QE_CLK15, /* Clock 15 */
+ QE_CLK16, /* Clock 16 */
+ QE_CLK17, /* Clock 17 */
+ QE_CLK18, /* Clock 18 */
+ QE_CLK19, /* Clock 19 */
+ QE_CLK20, /* Clock 20 */
+ QE_CLK21, /* Clock 21 */
+ QE_CLK22, /* Clock 22 */
+ QE_CLK23, /* Clock 23 */
+ QE_CLK24, /* Clock 24 */
+ QE_CLK_DUMMY,
+};
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG 0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXUCR_GRANT 0x00008000
+#define QE_CMXUCR_TSA 0x00004000
+#define QE_CMXUCR_BKPT 0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG 0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXGCR_USBCS 0x0000000f
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG 0x00010000
+#define QE_RESET 0x80000000
+#define QE_INIT_TX_RX 0x00000000
+#define QE_INIT_RX 0x00000001
+#define QE_INIT_TX 0x00000002
+#define QE_ENTER_HUNT_MODE 0x00000003
+#define QE_STOP_TX 0x00000004
+#define QE_GRACEFUL_STOP_TX 0x00000005
+#define QE_RESTART_TX 0x00000006
+#define QE_CLOSE_RX_BD 0x00000007
+#define QE_SWITCH_COMMAND 0x00000007
+#define QE_SET_GROUP_ADDRESS 0x00000008
+#define QE_START_IDMA 0x00000009
+#define QE_MCC_STOP_RX 0x00000009
+#define QE_ATM_TRANSMIT 0x0000000a
+#define QE_HPAC_CLEAR_ALL 0x0000000b
+#define QE_GRACEFUL_STOP_RX 0x0000001a
+#define QE_RESTART_RX 0x0000001b
+#define QE_HPAC_SET_PRIORITY 0x0000010b
+#define QE_HPAC_STOP_TX 0x0000020b
+#define QE_HPAC_STOP_RX 0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b
+#define QE_HPAC_START_TX 0x0000060b
+#define QE_HPAC_START_RX 0x0000070b
+#define QE_USB_STOP_TX 0x0000000a
+#define QE_USB_RESTART_TX 0x0000000b
+#define QE_QMC_STOP_TX 0x0000000c
+#define QE_QMC_STOP_RX 0x0000000d
+#define QE_SS7_SU_FIL_RESET 0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS 0x0000000a
+#define QE_MCC_INIT_TX_RX_16 0x00000003
+#define QE_MCC_STOP_TX 0x00000004
+#define QE_MCC_INIT_TX_1 0x00000005
+#define QE_MCC_INIT_RX_1 0x00000006
+#define QE_MCC_RESET 0x00000007
+#define QE_SET_TIMER 0x00000008
+#define QE_RANDOM_NUMBER 0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT 0x00000011
+#define QE_ASSIGN_PAGE 0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013
+#define QE_START_FLOW_CONTROL 0x00000014
+#define QE_STOP_FLOW_CONTROL 0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
+
+#define QE_ASSIGN_RISC 0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT 6
+#define QE_CR_MCN_USB_SHIFT 4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8
+#define QE_CR_SNUM_SHIFT 17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID 0x00000000
+#define QE_CR_SUBBLOCK_USB 0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
+#define QE_CR_SUBBLOCK_MCC1 0x03800000
+#define QE_CR_SUBBLOCK_MCC2 0x03a00000
+#define QE_CR_SUBBLOCK_MCC3 0x03000000
+#define QE_CR_SUBBLOCK_IDMA1 0x02800000
+#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
+#define QE_CR_SUBBLOCK_HPAC 0x01e00000
+#define QE_CR_SUBBLOCK_SPI1 0x01400000
+#define QE_CR_SUBBLOCK_SPI2 0x01600000
+#define QE_CR_SUBBLOCK_RAND 0x01c00000
+#define QE_CR_SUBBLOCK_TIMER 0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
+#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
+#define QE_CR_PROTOCOL_ATM_POS 0x0A
+#define QE_CR_PROTOCOL_ETHERNET 0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
+
+/* BMR byte order */
+#define QE_BMR_BYTE_ORDER_BO_PPC 0x08 /* powerpc little endian */
+#define QE_BMR_BYTE_ORDER_BO_MOT 0x10 /* motorola big endian */
+#define QE_BMR_BYTE_ORDER_BO_MAX 0x18
+
+/* BRG configuration register */
+#define QE_BRGC_ENABLE 0x00010000
+#define QE_BRGC_DIVISOR_SHIFT 1
+#define QE_BRGC_DIVISOR_MAX 0xFFF
+#define QE_BRGC_DIV16 1
+
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS 0x80
+#define QE_GTCFR1_STP2 0x20
+#define QE_GTCFR1_RST2 0x10
+#define QE_GTCFR1_GM2 0x08
+#define QE_GTCFR1_GM1 0x04
+#define QE_GTCFR1_STP1 0x02
+#define QE_GTCFR1_RST1 0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1 0x02000000
+#define QE_SDSR_BER2 0x01000000
+
+#define QE_SDMR_GLB_1_MSK 0x80000000
+#define QE_SDMR_ADR_SEL 0x20000000
+#define QE_SDMR_BER1_MSK 0x02000000
+#define QE_SDMR_BER2_MSK 0x01000000
+#define QE_SDMR_EB1_MSK 0x00800000
+#define QE_SDMR_ER1_MSK 0x00080000
+#define QE_SDMR_ER2_MSK 0x00040000
+#define QE_SDMR_CEN_MASK 0x0000E000
+#define QE_SDMR_SBER_1 0x00000200
+#define QE_SDMR_SBER_2 0x00000200
+#define QE_SDMR_EB1_PR_MASK 0x000000C0
+#define QE_SDMR_ER1_PR 0x00000008
+
+#define QE_SDMR_CEN_SHIFT 13
+#define QE_SDMR_EB1_PR_SHIFT 6
+
+#define QE_SDTM_MSNUM_SHIFT 24
+
+#define QE_SDEBCR_BA_MASK 0x01FFFFFF
+
+/* UPC */
+#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
+#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
+#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
+#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
+
+/* UCC */
+#define UCC_GUEMR_MODE_MASK_RX 0x02
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_RX 0x02
+#define UCC_GUEMR_MODE_FAST_TX 0x01
+#define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
+ must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM */
+struct ucc_slow_pram {
+ u16 rbase; /* RX BD base address */
+ u16 tbase; /* TX BD base address */
+ u8 rfcr; /* Rx function code */
+ u8 tfcr; /* Tx function code */
+ u16 mrblr; /* Rx buffer length */
+ u32 rstate; /* Rx internal state */
+ u32 rptr; /* Rx internal data pointer */
+ u16 rbptr; /* rb BD Pointer */
+ u16 rcount; /* Rx internal byte count */
+ u32 rtemp; /* Rx temp */
+ u32 tstate; /* Tx internal state */
+ u32 tptr; /* Tx internal data pointer */
+ u16 tbptr; /* Tx BD pointer */
+ u16 tcount; /* Tx byte count */
+ u32 ttemp; /* Tx temp */
+ u32 rcrc; /* temp receive CRC */
+ u32 tcrc; /* temp transmit CRC */
+} __attribute__ ((packed));
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
+#define UCC_SLOW_GUMR_H_CRC16 0x00004000
+#define UCC_SLOW_GUMR_H_CRC16CCITT 0x00000000
+#define UCC_SLOW_GUMR_H_CRC32CCITT 0x00008000
+#define UCC_SLOW_GUMR_H_REVD 0x00002000
+#define UCC_SLOW_GUMR_H_TRX 0x00001000
+#define UCC_SLOW_GUMR_H_TTX 0x00000800
+#define UCC_SLOW_GUMR_H_CDP 0x00000400
+#define UCC_SLOW_GUMR_H_CTSP 0x00000200
+#define UCC_SLOW_GUMR_H_CDS 0x00000100
+#define UCC_SLOW_GUMR_H_CTSS 0x00000080
+#define UCC_SLOW_GUMR_H_TFL 0x00000040
+#define UCC_SLOW_GUMR_H_RFW 0x00000020
+#define UCC_SLOW_GUMR_H_TXSY 0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC 0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC 0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM 0x00000002
+#define UCC_SLOW_GUMR_H_RSYN 0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI 0x10000000
+#define UCC_SLOW_GUMR_L_RINV 0x02000000
+#define UCC_SLOW_GUMR_L_TINV 0x01000000
+#define UCC_SLOW_GUMR_L_TEND 0x00020000
+#define UCC_SLOW_GUMR_L_ENR 0x00000020
+#define UCC_SLOW_GUMR_L_ENT 0x00000010
+
+/* General UCC FAST Mode Register */
+#define UCC_FAST_GUMR_TCI 0x20000000
+#define UCC_FAST_GUMR_TRX 0x10000000
+#define UCC_FAST_GUMR_TTX 0x08000000
+#define UCC_FAST_GUMR_CDP 0x04000000
+#define UCC_FAST_GUMR_CTSP 0x02000000
+#define UCC_FAST_GUMR_CDS 0x01000000
+#define UCC_FAST_GUMR_CTSS 0x00800000
+#define UCC_FAST_GUMR_TXSY 0x00020000
+#define UCC_FAST_GUMR_RSYN 0x00010000
+#define UCC_FAST_GUMR_RTSM 0x00002000
+#define UCC_FAST_GUMR_REVD 0x00000400
+#define UCC_FAST_GUMR_ENR 0x00000020
+#define UCC_FAST_GUMR_ENT 0x00000010
+
+/* Slow UCC Event Register (UCCE) */
+#define UCC_SLOW_UCCE_GLR 0x1000
+#define UCC_SLOW_UCCE_GLT 0x0800
+#define UCC_SLOW_UCCE_DCC 0x0400
+#define UCC_SLOW_UCCE_FLG 0x0200
+#define UCC_SLOW_UCCE_AB 0x0200
+#define UCC_SLOW_UCCE_IDLE 0x0100
+#define UCC_SLOW_UCCE_GRA 0x0080
+#define UCC_SLOW_UCCE_TXE 0x0010
+#define UCC_SLOW_UCCE_RXF 0x0008
+#define UCC_SLOW_UCCE_CCR 0x0008
+#define UCC_SLOW_UCCE_RCH 0x0008
+#define UCC_SLOW_UCCE_BSY 0x0004
+#define UCC_SLOW_UCCE_TXB 0x0002
+#define UCC_SLOW_UCCE_TX 0x0002
+#define UCC_SLOW_UCCE_RX 0x0001
+#define UCC_SLOW_UCCE_GOV 0x0001
+#define UCC_SLOW_UCCE_GUN 0x0002
+#define UCC_SLOW_UCCE_GINT 0x0004
+#define UCC_SLOW_UCCE_IQOV 0x0008
+
+#define UCC_SLOW_UCCE_HDLC_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+ UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF | \
+ UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_ENET_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+ UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF)
+#define UCC_SLOW_UCCE_TRANS_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+ UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
+ UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_UART_SET (UCC_SLOW_UCCE_BSY | UCC_SLOW_UCCE_GRA | \
+ UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
+ UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_QMC_SET (UCC_SLOW_UCCE_IQOV | UCC_SLOW_UCCE_GINT | \
+ UCC_SLOW_UCCE_GUN | UCC_SLOW_UCCE_GOV)
+
+#define UCC_SLOW_UCCE_OTHER (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
+ UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | \
+ UCC_SLOW_UCCE_GLR)
+
+#define UCC_SLOW_INTR_TX UCC_SLOW_UCCE_TXB
+#define UCC_SLOW_INTR_RX (UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX)
+#define UCC_SLOW_INTR (UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX)
+
+/* UCC Transmit On Demand Register (UTODR) */
+#define UCC_SLOW_TOD 0x8000
+#define UCC_FAST_TOD 0x8000
+
+/* Function code masks */
+#define FC_GBL 0x20
+#define FC_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_GBL 0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
+
+static inline long IS_MURAM_ERR(const u32 offset)
+{
+ return offset > (u32) - 1000L;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_QE_H */
--- /dev/null
+/*
+ * include/asm-powerpc/qe_ic.h
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE IC external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_IC_H
+#define _ASM_POWERPC_QE_IC_H
+
+#include <linux/irq.h>
+
+#define NUM_OF_QE_IC_GROUPS 6
+
+/* Flags when we init the QE IC */
+#define QE_IC_SPREADMODE_GRP_W 0x00000001
+#define QE_IC_SPREADMODE_GRP_X 0x00000002
+#define QE_IC_SPREADMODE_GRP_Y 0x00000004
+#define QE_IC_SPREADMODE_GRP_Z 0x00000008
+#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010
+#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020
+
+#define QE_IC_LOW_SIGNAL 0x00000100
+#define QE_IC_HIGH_SIGNAL 0x00000200
+
+#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000
+#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000
+#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000
+#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000
+#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000
+#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000
+#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000
+#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000
+#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000
+#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000
+#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000
+#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000
+#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12)
+
+/* QE interrupt sources groups */
+enum qe_ic_grp_id {
+ QE_IC_GRP_W = 0, /* QE interrupt controller group W */
+ QE_IC_GRP_X, /* QE interrupt controller group X */
+ QE_IC_GRP_Y, /* QE interrupt controller group Y */
+ QE_IC_GRP_Z, /* QE interrupt controller group Z */
+ QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */
+ QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */
+};
+
+void qe_ic_init(struct device_node *node, unsigned int flags);
+void qe_ic_set_highest_priority(unsigned int virq, int high);
+int qe_ic_set_priority(unsigned int virq, unsigned int priority);
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
+
+#endif /* _ASM_POWERPC_QE_IC_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC unit routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_H__
+#define __UCC_H__
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#define STATISTICS
+
+#define UCC_MAX_NUM 8
+
+/* Slow or fast type for UCCs.
+*/
+enum ucc_speed_type {
+ UCC_SPEED_TYPE_FAST, UCC_SPEED_TYPE_SLOW
+};
+
+/* Initial UCCs Parameter RAM address relative to: MEM_MAP_BASE (IMMR).
+*/
+enum ucc_pram_initial_offset {
+ UCC_PRAM_OFFSET_UCC1 = 0x8400,
+ UCC_PRAM_OFFSET_UCC2 = 0x8500,
+ UCC_PRAM_OFFSET_UCC3 = 0x8600,
+ UCC_PRAM_OFFSET_UCC4 = 0x9000,
+ UCC_PRAM_OFFSET_UCC5 = 0x8000,
+ UCC_PRAM_OFFSET_UCC6 = 0x8100,
+ UCC_PRAM_OFFSET_UCC7 = 0x8200,
+ UCC_PRAM_OFFSET_UCC8 = 0x8300
+};
+
+/* ucc_set_type
+ * Sets UCC to slow or fast mode.
+ *
+ * ucc_num - (In) number of UCC (0-7).
+ * regs - (In) pointer to registers base for the UCC.
+ * speed - (In) slow or fast mode for UCC.
+ */
+int ucc_set_type(int ucc_num, struct ucc_common *regs,
+ enum ucc_speed_type speed);
+
+/* ucc_init_guemr
+ * Init the Guemr register.
+ *
+ * regs - (In) pointer to registers base for the UCC.
+ */
+int ucc_init_guemr(struct ucc_common *regs);
+
+int ucc_set_qe_mux_mii_mng(int ucc_num);
+
+int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode);
+
+int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask);
+
+/* QE MUX clock routing for UCC
+*/
+static inline int ucc_set_qe_mux_grant(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
+}
+
+static inline int ucc_set_qe_mux_tsa(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
+}
+
+static inline int ucc_set_qe_mux_bkpt(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
+}
+
+#endif /* __UCC_H__ */
--- /dev/null
+/*
+ * include/asm-powerpc/ucc_fast.h
+ *
+ * Internal header file for UCC FAST unit routines.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_FAST_H__
+#define __UCC_FAST_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* Receive BD's status */
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_F 0x04000000 /* first */
+
+/* transmit BD's status */
+#define T_R 0x80000000 /* ready bit */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases */
+#define UCC_FAST_RX_ALIGN 4
+#define UCC_FAST_MRBLR_ALIGNMENT 4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
+
+/* Sizes */
+#define UCC_FAST_URFS_MIN_VAL 0x88
+#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8
+
+/* ucc_fast_channel_protocol_mode - UCC FAST mode */
+enum ucc_fast_channel_protocol_mode {
+ UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
+ UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
+ UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
+ UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
+ UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
+ UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
+ UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
+ UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
+ UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
+ UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
+ UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
+};
+
+/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
+enum ucc_fast_transparent_txrx {
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
+};
+
+/* UCC fast diagnostic mode */
+enum ucc_fast_diag_mode {
+ UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
+ UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
+ UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
+ UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
+};
+
+/* UCC fast Sync length (transparent mode only) */
+enum ucc_fast_sync_len {
+ UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
+ UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
+ UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
+ UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
+};
+
+/* UCC fast RTS mode */
+enum ucc_fast_ready_to_send {
+ UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
+ UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
+};
+
+/* UCC fast receiver decoding mode */
+enum ucc_fast_rx_decoding_method {
+ UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
+ UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
+ UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
+};
+
+/* UCC fast transmitter encoding mode */
+enum ucc_fast_tx_encoding_method {
+ UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
+ UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
+ UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
+};
+
+/* UCC fast CRC length */
+enum ucc_fast_transparent_tcrc {
+ UCC_FAST_16_BIT_CRC = 0x00000000,
+ UCC_FAST_CRC_RESERVED0 = 0x00000040,
+ UCC_FAST_32_BIT_CRC = 0x00000080,
+ UCC_FAST_CRC_RESERVED1 = 0x000000C0
+};
+
+/* Fast UCC initialization structure */
+struct ucc_fast_info {
+ int ucc_num;
+ enum qe_clock rx_clock;
+ enum qe_clock tx_clock;
+ u32 regs;
+ int irq;
+ u32 uccm_mask;
+ int bd_mem_part;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int tci;
+ int txsy;
+ int rtsm;
+ int revd;
+ int rsyn;
+ u16 max_rx_buf_length;
+ u16 urfs;
+ u16 urfet;
+ u16 urfset;
+ u16 utfs;
+ u16 utfet;
+ u16 utftt;
+ u16 ufpt;
+ enum ucc_fast_channel_protocol_mode mode;
+ enum ucc_fast_transparent_txrx ttx_trx;
+ enum ucc_fast_tx_encoding_method tenc;
+ enum ucc_fast_rx_decoding_method renc;
+ enum ucc_fast_transparent_tcrc tcrc;
+ enum ucc_fast_sync_len synl;
+};
+
+struct ucc_fast_private {
+ struct ucc_fast_info *uf_info;
+ struct ucc_fast *uf_regs; /* a pointer to memory map of UCC regs. */
+ u32 *p_ucce; /* a pointer to the event register in memory. */
+ u32 *p_uccm; /* a pointer to the mask register in memory. */
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+ virtual fifo */
+ u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+ virtual fifo */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counter. */
+ u32 rx_frames; /* Received frames counter (only frames
+ passed to application). */
+ u32 tx_discarded; /* Discarded tx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+ u32 rx_discarded; /* Discarded rx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+#endif /* STATISTICS */
+ u16 mrblr; /* maximum receive buffer length */
+};
+
+/* ucc_fast_init
+ * Initializes Fast UCC according to user provided parameters.
+ *
+ * uf_info - (In) pointer to the fast UCC info structure.
+ * uccf_ret - (Out) pointer to the fast UCC structure.
+ */
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
+
+/* ucc_fast_free
+ * Frees all resources for fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_free(struct ucc_fast_private * uccf);
+
+/* ucc_fast_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_irq
+ * Handles interrupts on fast UCC.
+ * Called from the general interrupt routine to handle interrupts on fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_irq(struct ucc_fast_private * uccf);
+
+/* ucc_fast_transmit_on_demand
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
+
+#endif /* __UCC_FAST_H__ */
--- /dev/null
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC SLOW unit routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_SLOW_H__
+#define __UCC_SLOW_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* transmit BD's status */
+#define T_R 0x80000000 /* ready bit */
+#define T_PAD 0x40000000 /* add pads to short frames */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+#define T_A 0x04000000 /* Address - the data transmitted as address
+ chars */
+#define T_TC 0x04000000 /* transmit CRC */
+#define T_CM 0x02000000 /* continuous mode */
+#define T_DEF 0x02000000 /* collision on previous attempt to transmit */
+#define T_P 0x01000000 /* Preamble - send Preamble sequence before
+ data */
+#define T_HB 0x01000000 /* heartbeat */
+#define T_NS 0x00800000 /* No Stop */
+#define T_LC 0x00800000 /* late collision */
+#define T_RL 0x00400000 /* retransmission limit */
+#define T_UN 0x00020000 /* underrun */
+#define T_CT 0x00010000 /* CTS lost */
+#define T_CSL 0x00010000 /* carrier sense lost */
+#define T_RC 0x003c0000 /* retry count */
+
+/* Receive BD's status */
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_C 0x08000000 /* the last byte in this buffer is a cntl
+ char */
+#define R_F 0x04000000 /* first */
+#define R_A 0x04000000 /* the first byte in this buffer is address
+ byte */
+#define R_CM 0x02000000 /* continuous mode */
+#define R_ID 0x01000000 /* buffer close on reception of idles */
+#define R_M 0x01000000 /* Frame received because of promiscuous
+ mode */
+#define R_AM 0x00800000 /* Address match */
+#define R_DE 0x00800000 /* Address match */
+#define R_LG 0x00200000 /* Break received */
+#define R_BR 0x00200000 /* Frame length violation */
+#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
+#define R_FR 0x00100000 /* Framing Error (no stop bit) character
+ received */
+#define R_PR 0x00080000 /* Parity Error character received */
+#define R_AB 0x00080000 /* Frame Aborted */
+#define R_SH 0x00080000 /* frame is too short */
+#define R_CR 0x00040000 /* CRC Error */
+#define R_OV 0x00020000 /* Overrun */
+#define R_CD 0x00010000 /* CD lost */
+#define R_CL 0x00010000 /* this frame is closed because of a
+ collision */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_SLOW_RX_ALIGN 4
+#define UCC_SLOW_MRBLR_ALIGNMENT 4
+#define UCC_SLOW_PRAM_SIZE 0x100
+#define ALIGNMENT_OF_UCC_SLOW_PRAM 64
+
+/* UCC Slow Channel Protocol Mode */
+enum ucc_slow_channel_protocol_mode {
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
+};
+
+/* UCC Slow Transparent Transmit CRC (TCRC) */
+enum ucc_slow_transparent_tcrc {
+ /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
+ /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
+ /* 32-bit CCITT CRC (Ethernet and HDLC) */
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
+};
+
+/* UCC Slow oversampling rate for transmitter (TDCR) */
+enum ucc_slow_tx_oversampling_rate {
+ /* 1x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
+ /* 8x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
+ /* 16x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
+ /* 32x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
+};
+
+/* UCC Slow Oversampling rate for receiver (RDCR)
+*/
+enum ucc_slow_rx_oversampling_rate {
+ /* 1x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
+ /* 8x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
+ /* 16x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
+ /* 32x clock mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
+};
+
+/* UCC Slow Transmitter encoding method (TENC)
+*/
+enum ucc_slow_tx_encoding_method {
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
+};
+
+/* UCC Slow Receiver decoding method (RENC)
+*/
+enum ucc_slow_rx_decoding_method {
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
+};
+
+/* UCC Slow Diagnostic mode (DIAG)
+*/
+enum ucc_slow_diag_mode {
+ UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
+ UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
+ UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
+ UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
+};
+
+struct ucc_slow_info {
+ int ucc_num;
+ enum qe_clock rx_clock;
+ enum qe_clock tx_clock;
+ struct ucc_slow *us_regs;
+ int irq;
+ u16 uccm_mask;
+ int data_mem_part;
+ int init_tx;
+ int init_rx;
+ u32 tx_bd_ring_len;
+ u32 rx_bd_ring_len;
+ int rx_interrupts;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int rinv;
+ int tinv;
+ int rtsm;
+ int rfw;
+ int tci;
+ int tend;
+ int tfl;
+ int txsy;
+ u16 max_rx_buf_length;
+ enum ucc_slow_transparent_tcrc tcrc;
+ enum ucc_slow_channel_protocol_mode mode;
+ enum ucc_slow_diag_mode diag;
+ enum ucc_slow_tx_oversampling_rate tdcr;
+ enum ucc_slow_rx_oversampling_rate rdcr;
+ enum ucc_slow_tx_encoding_method tenc;
+ enum ucc_slow_rx_decoding_method renc;
+};
+
+struct ucc_slow_private {
+ struct ucc_slow_info *us_info;
+ struct ucc_slow *us_regs; /* a pointer to memory map of UCC regs */
+ struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */
+ u32 us_pram_offset;
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ struct list_head confQ; /* frames passed to chip waiting for tx */
+ u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
+ and length for first BD in a frame */
+ u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
+ u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
+ u8 *confBd; /* next BD for confirm after Tx */
+ u8 *tx_bd; /* next BD for new Tx request */
+ u8 *rx_bd; /* next BD to collect after Rx */
+ void *p_rx_frame; /* accumulating receive frame */
+ u16 *p_ucce; /* a pointer to the event register in memory.
+ */
+ u16 *p_uccm; /* a pointer to the mask register in memory */
+ u16 saved_uccm; /* a saved mask for the RX Interrupt bits */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counters */
+ u32 rx_frames; /* Received frames counters (only frames
+ passed to application) */
+ u32 rx_discarded; /* Discarded frames counters (frames that
+ were discarded by the driver due to
+ errors) */
+#endif /* STATISTICS */
+};
+
+/* ucc_slow_init
+ * Initializes Slow UCC according to provided parameters.
+ *
+ * us_info - (In) pointer to the slow UCC info structure.
+ * uccs_ret - (Out) pointer to the slow UCC structure.
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
+
+/* ucc_slow_free
+ * Frees all resources for slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_free(struct ucc_slow_private * uccs);
+
+/* ucc_slow_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_poll_transmitter_now
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
+
+/* ucc_slow_graceful_stop_tx
+ * Smoothly stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_stop_tx
+ * Stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_restart_x
+ * Restarts transmitting on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_restart_x(struct ucc_slow_private * uccs);
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
+
+#endif /* __UCC_SLOW_H__ */
struct gianfar_platform_data {
/* device specific information */
- u32 device_flags;
-
+ u32 device_flags;
/* board specific information */
- u32 board_flags;
- u32 bus_id;
- u32 phy_id;
- u8 mac_addr[6];
+ u32 board_flags;
+ u32 bus_id;
+ u32 phy_id;
+ u8 mac_addr[6];
};
struct gianfar_mdio_data {
/* board specific information */
- int irq[32];
+ int irq[32];
};
/* Flags related to gianfar device features */
struct fsl_i2c_platform_data {
/* device specific information */
- u32 device_flags;
+ u32 device_flags;
};
/* Flags related to I2C device features */
#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
#define FSL_I2C_DEV_CLOCK_5200 0x00000002
-
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,
struct fsl_usb2_platform_data {
/* board specific information */
- enum fsl_usb2_operating_modes operating_mode;
- enum fsl_usb2_phy_modes phy_mode;
- unsigned int port_enables;
+ enum fsl_usb2_operating_modes operating_mode;
+ enum fsl_usb2_phy_modes phy_mode;
+ unsigned int port_enables;
};
/* Flags in fsl_usb2_mph_platform_data */
u32 sysclk;
};
-#endif /* _FSL_DEVICE_H_ */
-#endif /* __KERNEL__ */
+/* Ethernet interface (phy management and speed)
+*/
+enum enet_interface {
+ ENET_10_MII, /* 10 Base T, MII interface */
+ ENET_10_RMII, /* 10 Base T, RMII interface */
+ ENET_10_RGMII, /* 10 Base T, RGMII interface */
+ ENET_100_MII, /* 100 Base T, MII interface */
+ ENET_100_RMII, /* 100 Base T, RMII interface */
+ ENET_100_RGMII, /* 100 Base T, RGMII interface */
+ ENET_1000_GMII, /* 1000 Base T, GMII interface */
+ ENET_1000_RGMII, /* 1000 Base T, RGMII interface */
+ ENET_1000_TBI, /* 1000 Base T, TBI interface */
+ ENET_1000_RTBI /* 1000 Base T, RTBI interface */
+};
+
+struct ucc_geth_platform_data {
+ /* device specific information */
+ u32 device_flags;
+ u32 phy_reg_addr;
+
+ /* board specific information */
+ u32 board_flags;
+ u8 rx_clock;
+ u8 tx_clock;
+ u32 phy_id;
+ enum enet_interface phy_interface;
+ u32 phy_interrupt;
+ u8 mac_addr[6];
+};
+
+/* Flags related to UCC Gigabit Ethernet device features */
+#define FSL_UGETH_DEV_HAS_GIGABIT 0x00000001
+#define FSL_UGETH_DEV_HAS_COALESCE 0x00000002
+#define FSL_UGETH_DEV_HAS_RMON 0x00000004
+
+/* Flags in ucc_geth_platform_data */
+#define FSL_UGETH_BRD_HAS_PHY_INTR 0x00000001
+ /* if not set use a timer */
+
+#endif /* _FSL_DEVICE_H_ */
+#endif /* __KERNEL__ */
projects / linux-2.6 / commitdiff