[SCSI] aacraid: fix Sunrise Lake reset handling

The patch is *much* smaller than the description. I am attempting to
answer to those that want to understand an issue that was reported in
May this year.

If a Sunrise Lake based card that requires an alternate reset mechanism
is set up to ignore the commanded IOP_RESET it reports 0x00000010
(IOP_RESET ignored) instead of 0x3803000F (use alternate reset mechanism
to reset all cores), and thus the reset platform function decides to
switch to IOP_RESET_ALWAYS because the reset platform function
parameters indicate that we *need* to reset the card. IOP_RESET_ALWAYS
then responds with the 0x3803000F return code, but alas we treat this as
an error instead of using the alternate reset mechanism (put a 0x03 into
the register offset 0x38). The reset fails, but the fact that the
IOP_RESET_ALWAYS command was issued has put the card in a purposeful
shutdown state in preparation for the alternate hardware reset to be
applied. Yuck.

IOP_RESET is ignored in internal production cards, typically to ensure
that we catch all adapter lockup issues without the driver progressing
further, so this would not appear to be a field issue and thus this
patch was destined to be only in the internal Adaptec source tree.
IOP_RESET_ALWAYS is reserved for
kexec/kdump/FirmwareUpdate/AutomatedTestFrames so we did not function as
expected in any case. Also in the past we have had OEMs specifically
request that cards not be resetable after a BlinkLED/FirmwareAssert for
one reason or another and To head off the possibility that the Sunrise
Lake based cards would suffer a similar fate, we propose the enclosed
fix.

Yinghai Lu of SUN had a pre-production card with IOP_RESET disabled when
he reported an issue to the linux kernel list back in May regarding a
kexec problem resulting from this reset being ignore. His fix was to
update the Firmware to one that did not ignore the IOP_RESET. Previous
kernels did not attempt to reset the adapter and that is why it surfaced
as a regression in his hands.

The current list of aacraid based cards that use Sunrise Lake:

9005:0285:9005:02b5     Adaptec 5445
9005:0285:9005:02b6     Adaptec 5805
9005:0285:9005:02b7     Adaptec 5085
9005:0285:9005:02c3     Adaptec 51205
9005:0285:9005:02c4     Adaptec 51605
9005:0285:9005:02ce     Adaptec 51245
9005:0285:9005:02cf     Adaptec 51645
9005:0285:9005:02d0     Adaptec 52445
9005:0285:9005:02d1     Adaptec 5405
9005:0285:9005:02b8     ICP     ICP5445SL
9005:0285:9005:02b9     ICP     ICP5085SL
9005:0285:9005:02ba     ICP     ICP5805SL
9005:0285:9005:02c5     ICP     ICP5125SL
9005:0285:9005:02c6     ICP     ICP5165SL
9005:0285:108e:7aac     SUN     STK RAID REM
9005:0285:108e:0286     SUN     STK RAID INT
9005:0285:108e:0287     SUN     STK RAID EXT
9005:0285:108e:7aae     SUN     STK RAID EM

All of these are publicly released with IOP_RESET enabled. So there is
no immediate need for this patch.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index ebc65b9fea92903bd63301626515d97c83a78a5b..73eef3dc5dc629d0056a1e8ba2178a1205bc9f4e 100644 (file)
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -472,7 +472,7 @@ static int aac_rx_restart_adapter(struct aac_dev *dev, int bled)
                else {
                        bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
                          0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL);
-                       if (!bled && (var != 0x00000001))
+                       if (!bled && (var != 0x00000001) && (var != 0x3803000F))
                                bled = -EINVAL;
                }
                if (bled && (bled != -ETIMEDOUT))