*/
void __init arch_init_irq(void)
{
- mips_cpu_irq_init(0);
- rm7k_cpu_irq_init(8);
- rm9k_cpu_irq_init(12);
+ mips_cpu_irq_init();
+ rm7k_cpu_irq_init();
+ rm9k_cpu_irq_init();
#ifdef CONFIG_KGDB
excite_kgdb_init();
GT_WRITE(GT_INTRMASK_OFS, 0);
init_i8259_irqs(); /* 0 ... 15 */
- mips_cpu_irq_init(COBALT_CPU_IRQ); /* 16 ... 23 */
+ mips_cpu_irq_init(); /* 16 ... 23 */
/*
* Mask all cpu interrupts
#include <linux/ptrace.h>
#include <asm/i8259.h>
+#include <asm/irq_cpu.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
#include <asm/debug.h>
}
extern void vrc5477_irq_init(u32 base);
-extern void mips_cpu_irq_init(u32 base);
static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
void __init arch_init_irq(void)
/* init all controllers */
init_i8259_irqs();
- mips_cpu_irq_init(CPU_IRQ_BASE);
+ mips_cpu_irq_init();
vrc5477_irq_init(VRC5477_IRQ_BASE);
memcpy(&cpu_mask_nr_tbl, &kn01_cpu_mask_nr_tbl,
sizeof(kn01_cpu_mask_nr_tbl));
- mips_cpu_irq_init(DEC_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
} /* dec_init_kn01 */
memcpy(&cpu_mask_nr_tbl, &kn230_cpu_mask_nr_tbl,
sizeof(kn230_cpu_mask_nr_tbl));
- mips_cpu_irq_init(DEC_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
} /* dec_init_kn230 */
memcpy(&asic_mask_nr_tbl, &kn02_asic_mask_nr_tbl,
sizeof(kn02_asic_mask_nr_tbl));
- mips_cpu_irq_init(DEC_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
init_kn02_irqs(KN02_IRQ_BASE);
} /* dec_init_kn02 */
memcpy(&asic_mask_nr_tbl, &kn02ba_asic_mask_nr_tbl,
sizeof(kn02ba_asic_mask_nr_tbl));
- mips_cpu_irq_init(DEC_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
init_ioasic_irqs(IO_IRQ_BASE);
} /* dec_init_kn02ba */
memcpy(&asic_mask_nr_tbl, &kn02ca_asic_mask_nr_tbl,
sizeof(kn02ca_asic_mask_nr_tbl));
- mips_cpu_irq_init(DEC_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
init_ioasic_irqs(IO_IRQ_BASE);
} /* dec_init_kn02ca */
memcpy(&asic_mask_nr_tbl, &kn03_asic_mask_nr_tbl,
sizeof(kn03_asic_mask_nr_tbl));
- mips_cpu_irq_init(DEC_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
init_ioasic_irqs(IO_IRQ_BASE);
} /* dec_init_kn03 */
emma2rh_irq_init(EMMA2RH_IRQ_BASE);
emma2rh_sw_irq_init(EMMA2RH_SW_IRQ_BASE);
emma2rh_gpio_irq_init(EMMA2RH_GPIO_IRQ_BASE);
- mips_cpu_irq_init(CPU_IRQ_BASE);
+ mips_cpu_irq_init();
/* setup cascade interrupts */
setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
clear_c0_status(ST0_IM);
local_irq_disable();
- mips_cpu_irq_init(0);
- rm7k_cpu_irq_init(8);
+ mips_cpu_irq_init();
+ rm7k_cpu_irq_init();
}
void __init arch_init_irq(void)
{
/* IRQ 0 - 7 are for MIPS common irq_cpu controller */
- mips_cpu_irq_init(0);
+ mips_cpu_irq_init();
gt64120_init_pic();
}
#include <asm/mipsregs.h>
#include <asm/system.h>
-static int irq_base;
-
static inline void unmask_rm7k_irq(unsigned int irq)
{
- set_c0_intcontrol(0x100 << (irq - irq_base));
+ set_c0_intcontrol(0x100 << (irq - RM7K_CPU_IRQ_BASE));
}
static inline void mask_rm7k_irq(unsigned int irq)
{
- clear_c0_intcontrol(0x100 << (irq - irq_base));
+ clear_c0_intcontrol(0x100 << (irq - RM7K_CPU_IRQ_BASE));
}
static struct irq_chip rm7k_irq_controller = {
.unmask = unmask_rm7k_irq,
};
-void __init rm7k_cpu_irq_init(int base)
+void __init rm7k_cpu_irq_init(void)
{
+ int base = RM7K_CPU_IRQ_BASE;
int i;
clear_c0_intcontrol(0x00000f00); /* Mask all */
for (i = base; i < base + 4; i++)
set_irq_chip_and_handler(i, &rm7k_irq_controller,
handle_level_irq);
-
- irq_base = base;
}
#include <asm/mipsregs.h>
#include <asm/system.h>
-static int irq_base;
-
static inline void unmask_rm9k_irq(unsigned int irq)
{
- set_c0_intcontrol(0x1000 << (irq - irq_base));
+ set_c0_intcontrol(0x1000 << (irq - RM9K_CPU_IRQ_BASE));
}
static inline void mask_rm9k_irq(unsigned int irq)
{
- clear_c0_intcontrol(0x1000 << (irq - irq_base));
+ clear_c0_intcontrol(0x1000 << (irq - RM9K_CPU_IRQ_BASE));
}
static inline void rm9k_cpu_irq_enable(unsigned int irq)
EXPORT_SYMBOL(rm9000_perfcount_irq);
-void __init rm9k_cpu_irq_init(int base)
+void __init rm9k_cpu_irq_init(void)
{
+ int base = RM9K_CPU_IRQ_BASE;
int i;
clear_c0_intcontrol(0x0000f000); /* Mask all */
rm9000_perfcount_irq = base + 1;
set_irq_chip_and_handler(rm9000_perfcount_irq, &rm9k_perfcounter_irq,
handle_level_irq);
-
- irq_base = base;
}
* Don't even think about using this on SMP. You have been warned.
*
* This file exports one global function:
- * void mips_cpu_irq_init(int irq_base);
+ * void mips_cpu_irq_init(void);
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mipsmtregs.h>
#include <asm/system.h>
-static int mips_cpu_irq_base;
-
static inline void unmask_mips_irq(unsigned int irq)
{
- set_c0_status(0x100 << (irq - mips_cpu_irq_base));
+ set_c0_status(0x100 << (irq - MIPS_CPU_IRQ_BASE));
irq_enable_hazard();
}
static inline void mask_mips_irq(unsigned int irq)
{
- clear_c0_status(0x100 << (irq - mips_cpu_irq_base));
+ clear_c0_status(0x100 << (irq - MIPS_CPU_IRQ_BASE));
irq_disable_hazard();
}
{
unsigned int vpflags = dvpe();
- clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+ clear_c0_cause(0x100 << (irq - MIPS_CPU_IRQ_BASE));
evpe(vpflags);
unmask_mips_mt_irq(irq);
static void mips_mt_cpu_irq_ack(unsigned int irq)
{
unsigned int vpflags = dvpe();
- clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+ clear_c0_cause(0x100 << (irq - MIPS_CPU_IRQ_BASE));
evpe(vpflags);
mask_mips_mt_irq(irq);
}
.eoi = unmask_mips_mt_irq,
};
-void __init mips_cpu_irq_init(int irq_base)
+void __init mips_cpu_irq_init(void)
{
+ int irq_base = MIPS_CPU_IRQ_BASE;
int i;
/* Mask interrupts. */
for (i = irq_base + 2; i < irq_base + 8; i++)
set_irq_chip_and_handler(i, &mips_cpu_irq_controller,
handle_level_irq);
-
- mips_cpu_irq_base = irq_base;
}
static void rtlx_dispatch(void)
{
- do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ);
+ do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ);
}
.name = "RTLX",
};
-static int rtlx_irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ;
+static int rtlx_irq_num = MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ;
static char register_chrdev_failed[] __initdata =
KERN_ERR "rtlx_module_init: unable to register device\n";
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/mips_mt.h>
-#include <asm/mips-boards/maltaint.h> /* This is f*cking wrong */
#define MIPS_CPU_IPI_RESCHED_IRQ 0
#define MIPS_CPU_IPI_CALL_IRQ 1
static void ipi_resched_dispatch(void)
{
- do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
+ do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
}
static void ipi_call_dispatch(void)
{
- do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ);
+ do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
}
static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
}
- cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
- cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
+ cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
+ cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
setup_irq(cpu_ipi_resched_irq, &irq_resched);
setup_irq(cpu_ipi_call_irq, &irq_call);
* This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set.
*/
-/*
- * MIPSCPU_INT_BASE is identically defined in both
- * asm-mips/mips-boards/maltaint.h and asm-mips/mips-boards/simint.h,
- * but as yet there's no properly organized include structure that
- * will ensure that the right *int.h file will be included for a
- * given platform build.
- */
-
-#define MIPSCPU_INT_BASE 16
-
#define MIPS_CPU_IPI_IRQ 1
#define LOCK_MT_PRA() \
* interrupts.
*/
-static int cpu_ipi_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_IRQ;
+static int cpu_ipi_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_IRQ;
static irqreturn_t ipi_interrupt(int irq, void *dev_idm)
{
init_atlas_irqs(ATLAS_INT_BASE);
if (!cpu_has_veic)
- mips_cpu_irq_init(MIPSCPU_INT_BASE);
+ mips_cpu_irq_init();
switch(mips_revision_corid) {
case MIPS_REVISION_CORID_CORE_MSC:
init_i8259_irqs();
if (!cpu_has_veic)
- mips_cpu_irq_init (MIPSCPU_INT_BASE);
+ mips_cpu_irq_init();
switch(mips_revision_corid) {
case MIPS_REVISION_CORID_CORE_MSC:
void __init arch_init_irq(void)
{
- mips_cpu_irq_init(MIPSCPU_INT_BASE);
+ mips_cpu_irq_init();
}
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <asm/mips-boards/simint.h>
-
-
-extern void mips_cpu_irq_init(int);
+#include <asm/irq_cpu.h>
static inline int clz(unsigned long x)
{
void __init arch_init_irq(void)
{
- mips_cpu_irq_init(MIPSCPU_INT_BASE);
+ mips_cpu_irq_init();
}
*/
clear_c0_status(ST0_IM);
- mips_cpu_irq_init(0);
- rm7k_cpu_irq_init(8);
+ mips_cpu_irq_init();
+ rm7k_cpu_irq_init();
/* set up the cascading interrupts */
setup_irq(8, &cascade_mv64340);
*/
clear_c0_status(ST0_IM | ST0_BEV);
- rm7k_cpu_irq_init(8);
+ rm7k_cpu_irq_init();
/* set up the cascading interrupts */
setup_irq(8, &cascade_mv64340); /* unmask intControl IM8, IRQ 9 */
*/
clear_c0_status(ST0_IM);
- mips_cpu_irq_init(0);
+ mips_cpu_irq_init();
/* set up the cascading interrupts */
setup_irq(3, &cascade_fpga);
clear_c0_status(ST0_IM);
local_irq_disable();
- mips_cpu_irq_init(0);
- rm7k_cpu_irq_init(8);
+ mips_cpu_irq_init();
+ rm7k_cpu_irq_init();
gt64240_irq_init();
}
{
clear_c0_status(ST0_IM);
- mips_cpu_irq_init(0);
- rm7k_cpu_irq_init(8);
- rm9k_cpu_irq_init(12);
+ mips_cpu_irq_init();
+ rm7k_cpu_irq_init();
+ rm9k_cpu_irq_init();
#ifdef CONFIG_KGDB
/* At this point, initialize the second serial port */
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
+#include <asm/irq_cpu.h>
#include <asm/sgi/ioc.h>
#include <asm/sgi/hpc3.h>
indy_8254timer_irq();
}
-extern void mips_cpu_irq_init(unsigned int irq_base);
-
void __init arch_init_irq(void)
{
int i;
sgint->cmeimask1 = 0;
/* init CPU irqs */
- mips_cpu_irq_init(SGINT_CPU);
+ mips_cpu_irq_init();
for (i = SGINT_LOCAL0; i < SGI_INTERRUPTS; i++) {
struct irq_chip *handler;
void __init arch_init_irq(void)
{
- mips_cpu_irq_init(MIPS_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
}
#ifndef __ASM_DDB5XXX_DDB5477_H
#define __ASM_DDB5XXX_DDB5477_H
+#include <irq.h>
/*
* This contains macros that are specific to DDB5477 or renamed from
#define DDB_IRQ_BASE 0
#define I8259_IRQ_BASE DDB_IRQ_BASE
-#define VRC5477_IRQ_BASE (I8259_IRQ_BASE + NUM_I8259_IRQ)
-#define CPU_IRQ_BASE (VRC5477_IRQ_BASE + NUM_VRC5477_IRQ)
+#define CPU_IRQ_BASE MIPS_CPU_IRQ_BASE
+#define VRC5477_IRQ_BASE (CPU_IRQ_BASE + NUM_CPU_IRQ)
/*
* vrc5477 irq defs
#ifndef __ASM_DEC_INTERRUPTS_H
#define __ASM_DEC_INTERRUPTS_H
+#include <irq.h>
#include <asm/mipsregs.h>
#define DEC_CPU_INR_SW1 1 /* software #1 */
#define DEC_CPU_INR_SW0 0 /* software #0 */
-#define DEC_CPU_IRQ_BASE 0 /* first IRQ assigned to CPU */
+#define DEC_CPU_IRQ_BASE MIPS_CPU_IRQ_BASE /* first IRQ assigned to CPU */
#define DEC_CPU_IRQ_NR(n) ((n) + DEC_CPU_IRQ_BASE)
#define DEC_CPU_IRQ_MASK(n) (1 << ((n) + CAUSEB_IP))
#ifndef __ASM_EMMA2RH_EMMA2RH_H
#define __ASM_EMMA2RH_EMMA2RH_H
+#include <irq.h>
+
/*
* EMMA2RH registers
*/
#define NUM_EMMA2RH_IRQ 96
#define CPU_EMMA2RH_CASCADE 2
-#define EMMA2RH_IRQ_BASE 0
+#define CPU_IRQ_BASE MIPS_CPU_IRQ_BASE
+#define EMMA2RH_IRQ_BASE (CPU_IRQ_BASE + NUM_CPU_IRQ)
/*
* emma2rh irq defs
#define EMMA2RH_SW_IRQ_BASE (EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ)
#define EMMA2RH_GPIO_IRQ_BASE (EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW)
-#define CPU_IRQ_BASE (EMMA2RH_GPIO_IRQ_BASE + NUM_EMMA2RH_IRQ_GPIO)
#define EMMA2RH_SW_IRQ_INT0 (0+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT1 (1+EMMA2RH_SW_IRQ_BASE)
#ifndef _ASM_IRQ_CPU_H
#define _ASM_IRQ_CPU_H
-extern void mips_cpu_irq_init(int irq_base);
-extern void rm7k_cpu_irq_init(int irq_base);
-extern void rm9k_cpu_irq_init(int irq_base);
+extern void mips_cpu_irq_init(void);
+extern void rm7k_cpu_irq_init(void);
+extern void rm9k_cpu_irq_init(void);
#endif /* _ASM_IRQ_CPU_H */
#ifndef __ASM_COBALT_H
#define __ASM_COBALT_H
+#include <irq.h>
+
/*
* i8259 legacy interrupts used on Cobalt:
*
/*
* CPU IRQs are 16 ... 23
*/
-#define COBALT_CPU_IRQ 16
+#define COBALT_CPU_IRQ MIPS_CPU_IRQ_BASE
#define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2)
#define COBALT_SCC_IRQ (COBALT_CPU_IRQ + 3) /* pre-production has 85C30 */
#define NR_IRQS 256
+#include_next <irq.h>
+
#endif /* __ASM_MACH_EMMA2RH_IRQ_H */
#ifndef __ASM_MACH_GENERIC_IRQ_H
#define __ASM_MACH_GENERIC_IRQ_H
+#ifndef NR_IRQS
#define NR_IRQS 128
+#endif
+
+#ifdef CONFIG_IRQ_CPU
+
+#ifndef MIPS_CPU_IRQ_BASE
+#ifdef CONFIG_I8259
+#define MIPS_CPU_IRQ_BASE 16
+#else
+#define MIPS_CPU_IRQ_BASE 0
+#endif /* CONFIG_I8259 */
+#endif
+
+#ifdef CONFIG_IRQ_CPU_RM7K
+#ifndef RM7K_CPU_IRQ_BASE
+#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8)
+#endif
+#endif
+
+#ifdef CONFIG_IRQ_CPU_RM9K
+#ifndef RM9K_CPU_IRQ_BASE
+#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12)
+#endif
+#endif
+
+#endif /* CONFIG_IRQ_CPU */
#endif /* __ASM_MACH_GENERIC_IRQ_H */
#define NR_IRQS 256
+#include_next <irq.h>
+
#endif /* __ASM_MACH_MIPS_IRQ_H */
--- /dev/null
+#ifndef __ASM_MACH_VR41XX_IRQ_H
+#define __ASM_MACH_VR41XX_IRQ_H
+
+#include <asm/vr41xx/irq.h> /* for MIPS_CPU_IRQ_BASE */
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_VR41XX_IRQ_H */
#ifndef _MIPS_ATLASINT_H
#define _MIPS_ATLASINT_H
+#include <irq.h>
+
/*
* Interrupts 0..7 are used for Atlas CPU interrupts (nonEIC mode)
*/
-#define MIPSCPU_INT_BASE 0
+#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
/* CPU interrupt offsets */
#define MIPSCPU_INT_SW0 0
#ifndef _MIPS_MALTAINT_H
#define _MIPS_MALTAINT_H
+#include <irq.h>
+
/*
* Interrupts 0..15 are used for Malta ISA compatible interrupts
*/
/*
* Interrupts 16..23 are used for Malta CPU interrupts (nonEIC mode)
*/
-#define MIPSCPU_INT_BASE 16
+#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
/* CPU interrupt offsets */
#define MIPSCPU_INT_SW0 0
#ifndef _MIPS_SEADINT_H
#define _MIPS_SEADINT_H
+#include <irq.h>
+
/*
* Interrupts 0..7 are used for SEAD CPU interrupts
*/
-#define MIPSCPU_INT_BASE 0
+#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
#define MIPSCPU_INT_UART0 2
#define MIPSCPU_INT_UART1 3
#ifndef _MIPS_SIMINT_H
#define _MIPS_SIMINT_H
+#include <irq.h>
#define SIM_INT_BASE 0
#define MIPSCPU_INT_MB0 2
-#define MIPSCPU_INT_BASE 16
+#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
#define MIPS_CPU_TIMER_IRQ 7
#ifndef __ASM_RTLX_H
#define __ASM_RTLX_H_
+#include <irq.h>
+
#define LX_NODE_BASE 10
-#define MIPSCPU_INT_BASE 16
#define MIPS_CPU_RTLX_IRQ 0
#define RTLX_VERSION 2
* HAL2 driver). This will prevent many complications, trust me ;-)
*/
+#include <irq.h>
#include <asm/sgi/ioc.h>
#define SGINT_EISA 0 /* 16 EISA irq levels (Indigo2) */
-#define SGINT_CPU 16 /* MIPS CPU define 8 interrupt sources */
-#define SGINT_LOCAL0 24 /* 8 local0 irq levels */
-#define SGINT_LOCAL1 32 /* 8 local1 irq levels */
-#define SGINT_LOCAL2 40 /* 8 local2 vectored irq levels */
-#define SGINT_LOCAL3 48 /* 8 local3 vectored irq levels */
-#define SGINT_END 56 /* End of 'spaces' */
+#define SGINT_CPU MIPS_CPU_IRQ_BASE /* MIPS CPU define 8 interrupt sources */
+#define SGINT_LOCAL0 (SGINT_CPU+8) /* 8 local0 irq levels */
+#define SGINT_LOCAL1 (SGINT_CPU+16) /* 8 local1 irq levels */
+#define SGINT_LOCAL2 (SGINT_CPU+24) /* 8 local2 vectored irq levels */
+#define SGINT_LOCAL3 (SGINT_CPU+32) /* 8 local3 vectored irq levels */
+#define SGINT_END (SGINT_CPU+40) /* End of 'spaces' */
/*
* Individual interrupt definitions for the Indy and Indigo2
projects / linux-2.6 / commitdiff