]> err.no Git - linux-2.6/commitdiff
[POWERPC] Distinguish POWER6 partition modes and tell userspace
authorPaul Mackerras <paulus@samba.org>
Fri, 10 Nov 2006 09:38:53 +0000 (20:38 +1100)
committerPaul Mackerras <paulus@samba.org>
Mon, 4 Dec 2006 09:40:16 +0000 (20:40 +1100)
This adds code to look at the properties firmware puts in the device
tree to determine what compatibility mode the partition is in on
POWER6 machines, and set the ELF aux vector AT_HWCAP and AT_PLATFORM
entries appropriately.

Specifically, we look at the cpu-version property in the cpu node(s).
If that contains a "logical" PVR value (of the form 0x0f00000x), we
call identify_cpu again with this PVR value.  A value of 0x0f000001
indicates the partition is in POWER5+ compatibility mode, and a value
of 0x0f000002 indicates "POWER6 architected" mode, with various
extensions disabled.  We also look for various other properties:
ibm,dfp, ibm,purr and ibm,spurr.

Signed-off-by: Paul Mackerras <paulus@samba.org>
arch/powerpc/kernel/cputable.c
arch/powerpc/kernel/prom.c
arch/powerpc/kernel/prom_init.c
arch/powerpc/kernel/setup_32.c
arch/powerpc/kernel/setup_64.c
arch/powerpc/platforms/iseries/setup.c
arch/ppc/kernel/setup.c
include/asm-powerpc/cputable.h

index 992121b2d261614d88d25afd2282298ca49bca49..911ac442f44a6aa495903bbafc9c5c11e3d0bb79 100644 (file)
@@ -277,10 +277,45 @@ static struct cpu_spec cpu_specs[] = {
                .oprofile_mmcra_sipr    = MMCRA_SIPR,
                .platform               = "power5+",
        },
+       {       /* POWER6 in P5+ mode; 2.04-compliant processor */
+               .pvr_mask               = 0xffffffff,
+               .pvr_value              = 0x0f000001,
+               .cpu_name               = "POWER5+",
+               .cpu_features           = CPU_FTRS_POWER5,
+               .cpu_user_features      = COMMON_USER_POWER5_PLUS,
+               .icache_bsize           = 128,
+               .dcache_bsize           = 128,
+               .num_pmcs               = 6,
+               .oprofile_cpu_type      = "ppc64/power6",
+               .oprofile_type          = PPC_OPROFILE_POWER4,
+               .oprofile_mmcra_sihv    = POWER6_MMCRA_SIHV,
+               .oprofile_mmcra_sipr    = POWER6_MMCRA_SIPR,
+               .oprofile_mmcra_clear   = POWER6_MMCRA_THRM |
+                       POWER6_MMCRA_OTHER,
+               .platform               = "power5+",
+       },
        {       /* Power6 */
                .pvr_mask               = 0xffff0000,
                .pvr_value              = 0x003e0000,
-               .cpu_name               = "POWER6",
+               .cpu_name               = "POWER6 (raw)",
+               .cpu_features           = CPU_FTRS_POWER6,
+               .cpu_user_features      = COMMON_USER_POWER6 |
+                       PPC_FEATURE_POWER6_EXT,
+               .icache_bsize           = 128,
+               .dcache_bsize           = 128,
+               .num_pmcs               = 6,
+               .oprofile_cpu_type      = "ppc64/power6",
+               .oprofile_type          = PPC_OPROFILE_POWER4,
+               .oprofile_mmcra_sihv    = POWER6_MMCRA_SIHV,
+               .oprofile_mmcra_sipr    = POWER6_MMCRA_SIPR,
+               .oprofile_mmcra_clear   = POWER6_MMCRA_THRM |
+                       POWER6_MMCRA_OTHER,
+               .platform               = "power6x",
+       },
+       {       /* 2.05-compliant processor, i.e. Power6 "architected" mode */
+               .pvr_mask               = 0xffffffff,
+               .pvr_value              = 0x0f000002,
+               .cpu_name               = "POWER6 (architected)",
                .cpu_features           = CPU_FTRS_POWER6,
                .cpu_user_features      = COMMON_USER_POWER6,
                .icache_bsize           = 128,
@@ -1173,19 +1208,15 @@ static struct cpu_spec cpu_specs[] = {
 #endif /* CONFIG_PPC32 */
 };
 
-struct cpu_spec *identify_cpu(unsigned long offset)
+struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr)
 {
        struct cpu_spec *s = cpu_specs;
        struct cpu_spec **cur = &cur_cpu_spec;
-       unsigned int pvr = mfspr(SPRN_PVR);
        int i;
 
        s = PTRRELOC(s);
        cur = PTRRELOC(cur);
 
-       if (*cur != NULL)
-               return PTRRELOC(*cur);
-
        for (i = 0; i < ARRAY_SIZE(cpu_specs); i++,s++)
                if ((pvr & s->pvr_mask) == s->pvr_value) {
                        *cur = cpu_specs + i;
index 16d29d16b96f90b900c66885f679607976a02411..c18dbe77fdc29863eb5a4f3e57c2f5f62e0f93dc 100644 (file)
@@ -538,35 +538,31 @@ static struct ibm_pa_feature {
        {CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0},
 };
 
-static void __init check_cpu_pa_features(unsigned long node)
+static void __init scan_features(unsigned long node, unsigned char *ftrs,
+                                unsigned long tablelen,
+                                struct ibm_pa_feature *fp,
+                                unsigned long ft_size)
 {
-       unsigned char *pa_ftrs;
-       unsigned long len, tablelen, i, bit;
-
-       pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
-       if (pa_ftrs == NULL)
-               return;
+       unsigned long i, len, bit;
 
        /* find descriptor with type == 0 */
        for (;;) {
                if (tablelen < 3)
                        return;
-               len = 2 + pa_ftrs[0];
+               len = 2 + ftrs[0];
                if (tablelen < len)
                        return;         /* descriptor 0 not found */
-               if (pa_ftrs[1] == 0)
+               if (ftrs[1] == 0)
                        break;
                tablelen -= len;
-               pa_ftrs += len;
+               ftrs += len;
        }
 
        /* loop over bits we know about */
-       for (i = 0; i < ARRAY_SIZE(ibm_pa_features); ++i) {
-               struct ibm_pa_feature *fp = &ibm_pa_features[i];
-
-               if (fp->pabyte >= pa_ftrs[0])
+       for (i = 0; i < ft_size; ++i, ++fp) {
+               if (fp->pabyte >= ftrs[0])
                        continue;
-               bit = (pa_ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
+               bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
                if (bit ^ fp->invert) {
                        cur_cpu_spec->cpu_features |= fp->cpu_features;
                        cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
@@ -577,16 +573,59 @@ static void __init check_cpu_pa_features(unsigned long node)
        }
 }
 
+static void __init check_cpu_pa_features(unsigned long node)
+{
+       unsigned char *pa_ftrs;
+       unsigned long tablelen;
+
+       pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
+       if (pa_ftrs == NULL)
+               return;
+
+       scan_features(node, pa_ftrs, tablelen,
+                     ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
+}
+
+static struct feature_property {
+       const char *name;
+       u32 min_value;
+       unsigned long cpu_feature;
+       unsigned long cpu_user_ftr;
+} feature_properties[] __initdata = {
+#ifdef CONFIG_ALTIVEC
+       {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
+       {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_PPC64
+       {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
+       {"ibm,purr", 1, CPU_FTR_PURR, 0},
+       {"ibm,spurr", 1, CPU_FTR_SPURR, 0},
+#endif /* CONFIG_PPC64 */
+};
+
+static void __init check_cpu_feature_properties(unsigned long node)
+{
+       unsigned long i;
+       struct feature_property *fp = feature_properties;
+       const u32 *prop;
+
+       for (i = 0; i < ARRAY_SIZE(feature_properties); ++i, ++fp) {
+               prop = of_get_flat_dt_prop(node, fp->name, NULL);
+               if (prop && *prop >= fp->min_value) {
+                       cur_cpu_spec->cpu_features |= fp->cpu_feature;
+                       cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
+               }
+       }
+}
+
 static int __init early_init_dt_scan_cpus(unsigned long node,
                                          const char *uname, int depth,
                                          void *data)
 {
        static int logical_cpuid = 0;
        char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-#ifdef CONFIG_ALTIVEC
-       u32 *prop;
-#endif
-       u32 *intserv;
+       const u32 *prop;
+       const u32 *intserv;
        int i, nthreads;
        unsigned long len;
        int found = 0;
@@ -643,24 +682,27 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
                        intserv[i]);
                boot_cpuid = logical_cpuid;
                set_hard_smp_processor_id(boot_cpuid, intserv[i]);
-       }
 
-#ifdef CONFIG_ALTIVEC
-       /* Check if we have a VMX and eventually update CPU features */
-       prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", NULL);
-       if (prop && (*prop) > 0) {
-               cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC;
-               cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC;
-       }
-
-       /* Same goes for Apple's "altivec" property */
-       prop = (u32 *)of_get_flat_dt_prop(node, "altivec", NULL);
-       if (prop) {
-               cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC;
-               cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC;
+               /*
+                * PAPR defines "logical" PVR values for cpus that
+                * meet various levels of the architecture:
+                * 0x0f000001   Architecture version 2.04
+                * 0x0f000002   Architecture version 2.05
+                * If the cpu-version property in the cpu node contains
+                * such a value, we call identify_cpu again with the
+                * logical PVR value in order to use the cpu feature
+                * bits appropriate for the architecture level.
+                *
+                * A POWER6 partition in "POWER6 architected" mode
+                * uses the 0x0f000002 PVR value; in POWER5+ mode
+                * it uses 0x0f000001.
+                */
+               prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
+               if (prop && (*prop & 0xff000000) == 0x0f000000)
+                       identify_cpu(0, *prop);
        }
-#endif /* CONFIG_ALTIVEC */
 
+       check_cpu_feature_properties(node);
        check_cpu_pa_features(node);
 
 #ifdef CONFIG_PPC_PSERIES
index 8671eb634a92c9f631e75e907dcfb83ceb38a43c..396109a537cddc7ba7b70947d45c9dd193ccdcad 100644 (file)
@@ -627,6 +627,7 @@ static void __init early_cmdline_parse(void)
 /* Option vector 3: processor options supported */
 #define OV3_FP                 0x80    /* floating point */
 #define OV3_VMX                        0x40    /* VMX/Altivec */
+#define OV3_DFP                        0x20    /* decimal FP */
 
 /* Option vector 5: PAPR/OF options supported */
 #define OV5_LPAR               0x80    /* logical partitioning supported */
@@ -668,7 +669,7 @@ static unsigned char ibm_architecture_vec[] = {
        /* option vector 3: processor options supported */
        3 - 2,                          /* length */
        0,                              /* don't ignore, don't halt */
-       OV3_FP | OV3_VMX,
+       OV3_FP | OV3_VMX | OV3_DFP,
 
        /* option vector 4: IBM PAPR implementation */
        2 - 2,                          /* length */
index 04df53a3c86dc4b4c78e9407ae509ea602a7518c..61c65d19ef0618409feeedc778077765acc63b0f 100644 (file)
@@ -97,7 +97,7 @@ unsigned long __init early_init(unsigned long dt_ptr)
         * Identify the CPU type and fix up code sections
         * that depend on which cpu we have.
         */
-       spec = identify_cpu(offset);
+       spec = identify_cpu(offset, mfspr(SPRN_PVR));
 
        do_feature_fixups(spec->cpu_features,
                          PTRRELOC(&__start___ftr_fixup),
index f602a53b1b792906f916337c6e400f500eade513..3733de30e84dc07f6a52df31bf3f4506d31ca3ca 100644 (file)
@@ -171,7 +171,7 @@ void __init setup_paca(int cpu)
 void __init early_setup(unsigned long dt_ptr)
 {
        /* Identify CPU type */
-       identify_cpu(0);
+       identify_cpu(0, mfspr(SPRN_PVR));
 
        /* Assume we're on cpu 0 for now. Don't write to the paca yet! */
        setup_paca(0);
index 0f39bdbbf9173f3121c44a6cbfcbd1dab3727f18..1796644ec7dcfb627c9ab93967f9d7a13a9597b4 100644 (file)
@@ -677,7 +677,7 @@ void * __init iSeries_early_setup(void)
        /* Identify CPU type. This is done again by the common code later
         * on but calling this function multiple times is fine.
         */
-       identify_cpu(0);
+       identify_cpu(0, mfspr(SPRN_PVR));
 
        powerpc_firmware_features |= FW_FEATURE_ISERIES;
        powerpc_firmware_features |= FW_FEATURE_LPAR;
index 27faeca2c7a209438eca4fb394b2ce868ce357c2..3c506af1988085393265aeb5a30c6755b7ce220a 100644 (file)
@@ -313,7 +313,7 @@ early_init(int r3, int r4, int r5)
         * Identify the CPU type and fix up code sections
         * that depend on which cpu we have.
         */
-       spec = identify_cpu(offset);
+       spec = identify_cpu(offset, mfspr(SPRN_PVR));
        do_feature_fixups(spec->cpu_features,
                          PTRRELOC(&__start___ftr_fixup),
                          PTRRELOC(&__stop___ftr_fixup));
index 762d15e488791d39464fbcc74c0ccf1d19138f31..d06222a5be5e99f28dee465070f8c8041357ccdc 100644 (file)
@@ -24,6 +24,8 @@
 #define PPC_FEATURE_ICACHE_SNOOP       0x00002000
 #define PPC_FEATURE_ARCH_2_05          0x00001000
 #define PPC_FEATURE_PA6T               0x00000800
+#define PPC_FEATURE_HAS_DFP            0x00000400
+#define PPC_FEATURE_POWER6_EXT         0x00000200
 
 #define PPC_FEATURE_TRUE_LE            0x00000002
 #define PPC_FEATURE_PPC_LE             0x00000001
@@ -92,7 +94,7 @@ extern struct cpu_spec                *cur_cpu_spec;
 
 extern unsigned int __start___ftr_fixup, __stop___ftr_fixup;
 
-extern struct cpu_spec *identify_cpu(unsigned long offset);
+extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr);
 extern void do_feature_fixups(unsigned long value, void *fixup_start,
                              void *fixup_end);
 
@@ -149,6 +151,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
 #define CPU_FTR_PAUSE_ZERO             LONG_ASM_CONST(0x0000200000000000)
 #define CPU_FTR_PURR                   LONG_ASM_CONST(0x0000400000000000)
 #define CPU_FTR_CELL_TB_BUG            LONG_ASM_CONST(0x0000800000000000)
+#define CPU_FTR_SPURR                  LONG_ASM_CONST(0x0001000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -333,7 +336,13 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
            CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
            CPU_FTR_MMCRA | CPU_FTR_SMT | \
            CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
-           CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_REAL_LE)
+           CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE)
+#define CPU_FTRS_POWER6X (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+           CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+           CPU_FTR_MMCRA | CPU_FTR_SMT | \
+           CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+           CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE | \
+           CPU_FTR_SPURR | CPU_FTR_REAL_LE)
 #define CPU_FTRS_CELL  (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
            CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
            CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \