struct tasklet_struct msp430_irq_tasklet;
struct tasklet_struct ciintf_irq_tasklet;
int slot_status;
+ int ci_irq;
struct dvb_ca_en50221 ca;
char ir_dev_name[50];
u8 tuner_pll_address; /* used for philips_tdm1316l configs */
if (slot != 0)
return -EINVAL;
- // trigger on RISING edge during reset so we know when READY is re-asserted
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ if (budget_ci->ci_irq) {
+ // trigger on RISING edge during reset so we know when READY is re-asserted
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ }
budget_ci->slot_status = SLOTSTATUS_RESET;
ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
msleep(1);
}
}
+static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+ unsigned int flags;
+
+ // ensure we don't get spurious IRQs during initialisation
+ if (!budget_ci->budget.ci_present)
+ return -EINVAL;
+
+ // read the CAM status
+ flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+ if (flags & CICONTROL_CAMDETECT) {
+ // mark it as present if it wasn't before
+ if (budget_ci->slot_status & SLOTSTATUS_NONE) {
+ budget_ci->slot_status = SLOTSTATUS_PRESENT;
+ }
+
+ // during a RESET, we check if we can read from IO memory to see when CAM is ready
+ if (budget_ci->slot_status & SLOTSTATUS_RESET) {
+ if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) {
+ budget_ci->slot_status = SLOTSTATUS_READY;
+ }
+ }
+ } else {
+ budget_ci->slot_status = SLOTSTATUS_NONE;
+ }
+
+ if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+ if (budget_ci->slot_status & SLOTSTATUS_READY) {
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ }
+ return DVB_CA_EN50221_POLL_CAM_PRESENT;
+ }
+
+ return 0;
+}
+
static int ciintf_init(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
int flags;
int result;
+ int ci_version;
+ int ca_flags;
memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
// test if it is there
- if ((ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0) & 0xa0) != 0xa0) {
+ ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
+ if ((ci_version & 0xa0) != 0xa0) {
result = -ENODEV;
goto error;
}
+
// determine whether a CAM is present or not
flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
budget_ci->slot_status = SLOTSTATUS_NONE;
if (flags & CICONTROL_CAMDETECT)
budget_ci->slot_status = SLOTSTATUS_PRESENT;
+ // version 0xa2 of the CI firmware doesn't generate interrupts
+ if (ci_version == 0xa2) {
+ ca_flags = 0;
+ budget_ci->ci_irq = 0;
+ } else {
+ ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
+ DVB_CA_EN50221_FLAG_IRQ_FR |
+ DVB_CA_EN50221_FLAG_IRQ_DA;
+ budget_ci->ci_irq = 1;
+ }
+
// register CI interface
budget_ci->ca.owner = THIS_MODULE;
budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem;
budget_ci->ca.slot_reset = ciintf_slot_reset;
budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
+ budget_ci->ca.poll_slot_status = ciintf_poll_slot_status;
budget_ci->ca.data = budget_ci;
if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
&budget_ci->ca,
- DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
- DVB_CA_EN50221_FLAG_IRQ_FR |
- DVB_CA_EN50221_FLAG_IRQ_DA, 1)) != 0) {
+ ca_flags, 1)) != 0) {
printk("budget_ci: CI interface detected, but initialisation failed.\n");
goto error;
}
+
// Setup CI slot IRQ
- tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
- if (budget_ci->slot_status != SLOTSTATUS_NONE) {
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
- } else {
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ if (budget_ci->ci_irq) {
+ tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
+ if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
+ } else {
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ }
+ saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
}
- saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
+
+ // enable interface
ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
CICONTROL_RESET, 1, 0);
budget_ci->budget.ci_present = 1;
// forge a fake CI IRQ so the CAM state is setup correctly
- flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
- if (budget_ci->slot_status != SLOTSTATUS_NONE)
- flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
- dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+ if (budget_ci->ci_irq) {
+ flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
+ if (budget_ci->slot_status != SLOTSTATUS_NONE)
+ flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
+ dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+ }
return 0;
struct saa7146_dev *saa = budget_ci->budget.dev;
// disable CI interrupts
- saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
- saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
- tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+ if (budget_ci->ci_irq) {
+ saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
+ tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+ }
+
+ // reset interface
ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
msleep(1);
ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
if (*isr & MASK_10)
ttpci_budget_irq10_handler(dev, isr);
- if ((*isr & MASK_03) && (budget_ci->budget.ci_present))
+ if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq))
tasklet_schedule(&budget_ci->ciintf_irq_tasklet);
}