[ARM] 4937/1: [CSB637] Convert to new-style UART initialization

Converts the CSB637 to the new-style UART initialization API.

Signed-off-by: Bill Gatliff <bgat@billgatliff.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index c5c721d27f429291d2f86efb925f2fa1e1dd07be..26cda4301674c76f2833241408fe5142fda6b260 100644 (file)
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -40,17 +40,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata csb637_uart_config = {
-       .console_tty    = 0,                            /* ttyS0 */
-       .nr_tty         = 2,
-       .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
-};
-
 static void __init csb637_map_io(void)
 {
        /* Initialize processor: 3.6864 MHz crystal */
@@ -59,8 +48,11 @@ static void __init csb637_map_io(void)
        /* Setup the LEDs */
        at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
 
-       /* Setup the serial ports and console */
-       at91_init_serial(&csb637_uart_config);
+       /* DBGU on ttyS0 */
+       at91_register_uart(0, 0, 0);
+
+       /* make console=ttyS0 the default */
+       at91_set_serial_console(0);
 }
 
 static void __init csb637_init_irq(void)