* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
* =====================================================================
- * ToDo: ...
- * =====================================================================
- * Version: $Id: asyncdata.c,v 1.2.2.7 2005/11/13 23:05:18 hjlipp Exp $
- * =====================================================================
*/
#include "gigaset.h"
dbg(DEBUG_TRANSCMD, "%s: End of Command (%d Bytes)",
__func__, cbytes);
cs->cbytes = cbytes;
- gigaset_handle_modem_response(cs); /* can change cs->dle */
+ gigaset_handle_modem_response(cs); /* can change
+ cs->dle */
cbytes = 0;
if (cs->dle &&
{
struct cardstate *cs = inbuf->cs;
- gigaset_dbg_buffer(DEBUG_LOCKCMD, "received response", numbytes, src, 0);
+ gigaset_dbg_buffer(DEBUG_LOCKCMD, "received response",
+ numbytes, src, 0);
gigaset_if_receive(cs, src, numbytes);
return numbytes;
if (!(inbuf->inputstate & INS_DLE_char)) {
- /* FIXME Einfach je nach Modus Funktionszeiger in cs setzen [hier+hdlc_loop]? */
- /* FIXME Spart folgendes "if" und ermoeglicht andere Protokolle */
+ /* FIXME use function pointers? */
if (inbuf->inputstate & INS_command)
procbytes = cmd_loop(c, src, numbytes, inbuf);
else if (inbuf->bcs->proto2 == ISDN_PROTO_L2_HDLC)
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
* =====================================================================
- * ToDo: ...
- * =====================================================================
- * Version: $Id: bas-gigaset.c,v 1.52.4.19 2006/02/04 18:28:16 hjlipp Exp $
- * =====================================================================
*/
#include "gigaset.h"
MODULE_DEVICE_TABLE(usb, gigaset_table);
-/* Get a minor range for your devices from the usb maintainer */
-#define USB_SKEL_MINOR_BASE 200
-
/*======================= local function prototypes =============================*/
/* This function is called if a new device is connected to the USB port. It
(unsigned long) urb->context,
(unsigned long) urb->complete);
for (i = 0; i < urb->number_of_packets; i++) {
- struct usb_iso_packet_descriptor *pifd = &urb->iso_frame_desc[i];
+ struct usb_iso_packet_descriptor *pifd
+ = &urb->iso_frame_desc[i];
dbg(level,
" {offset=%u, length=%u, actual_length=%u, "
"status=%u}",
urb->iso_frame_desc[i].actual_length = 0;
}
if (likely(atomic_read(&ubc->running))) {
- urb->dev = bcs->cs->hw.bas->udev; /* clobbered by USB subsystem */
+ urb->dev = bcs->cs->hw.bas->udev; /* clobbered by USB subsystem */
urb->transfer_flags = URB_ISO_ASAP;
urb->number_of_packets = BAS_NUMFRAMES;
- dbg(DEBUG_ISO, "%s: isoc read overrun/resubmit", __func__);
+ dbg(DEBUG_ISO, "%s: isoc read overrun/resubmit",
+ __func__);
rc = usb_submit_urb(urb, SLAB_ATOMIC);
if (unlikely(rc != 0)) {
err("could not resubmit isochronous read URB: %s",
ubc = ucx->bcs->hw.bas;
IFNULLRETVAL(ubc, -EFAULT);
- urb->dev = ucx->bcs->cs->hw.bas->udev; /* clobbered by USB subsystem */
+ urb->dev = ucx->bcs->cs->hw.bas->udev; /* clobbered by USB subsystem */
urb->transfer_flags = URB_ISO_ASAP;
urb->transfer_buffer = ubc->isooutbuf->data;
urb->transfer_buffer_length = sizeof(ubc->isooutbuf->data);
//dbg(DEBUG_ISO, "%s: frame %d length=%d", __func__, nframe, ifd->length);
/* retrieve block of data to send */
- ifd->offset = gigaset_isowbuf_getbytes(ubc->isooutbuf, ifd->length);
+ ifd->offset = gigaset_isowbuf_getbytes(ubc->isooutbuf,
+ ifd->length);
if (ifd->offset < 0) {
if (ifd->offset == -EBUSY) {
dbg(DEBUG_ISO, "%s: buffer busy at frame %d",
break;
case -EXDEV: /* inspect individual frames */
/* assumptions (for lack of documentation):
- * - actual_length bytes of the frame in error are successfully sent
+ * - actual_length bytes of the frame in error are
+ * successfully sent
* - all following frames are not sent at all
*/
dbg(DEBUG_ISO, "%s: URB partially completed", __func__);
switch (urb->status) {
case 0: /* normal completion */
break;
- case -EXDEV: /* inspect individual frames (we do that anyway) */
+ case -EXDEV: /* inspect individual frames
+ (we do that anyway) */
dbg(DEBUG_ISO, "%s: URB partially completed", __func__);
break;
case -ENOENT:
totleft = urb->actual_length;
for (frame = 0; totleft > 0 && frame < BAS_NUMFRAMES; frame++) {
if (unlikely(urb->iso_frame_desc[frame].status)) {
- warn("isochronous read: frame %d: %s",
- frame, get_usb_statmsg(urb->iso_frame_desc[frame].status));
+ warn("isochronous read: frame %d: %s", frame,
+ get_usb_statmsg(urb->iso_frame_desc[frame].status));
break;
}
numbytes = urb->iso_frame_desc[frame].actual_length;
urb->iso_frame_desc[frame].status = 0;
urb->iso_frame_desc[frame].actual_length = 0;
}
- urb->dev = bcs->cs->hw.bas->udev; /* clobbered by USB subsystem */
+ urb->dev = bcs->cs->hw.bas->udev; /* clobbered by USB subsystem */
urb->transfer_flags = URB_ISO_ASAP;
urb->number_of_packets = BAS_NUMFRAMES;
if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0) {
* cs controller state structure
* buf command string to send
* len number of bytes to send (max. IF_WRITEBUF)
- * wake_tasklet tasklet to run when transmission is completed (NULL if none)
+ * wake_tasklet tasklet to run when transmission is completed
+ * (NULL if none)
* return value:
* number of bytes queued on success
* error code < 0 on error
/* gigaset_write_room
* tty_driver.write_room interface routine
- * return number of characters the driver will accept to be written via gigaset_write_cmd
+ * return number of characters the driver will accept to be written via
+ * gigaset_write_cmd
* parameter:
* controller state structure
* return value:
goto error;
/* allocate memory for our device state and intialize it */
- cardstate = gigaset_initcs(driver, 2, 0, 0, cidmode, GIGASET_MODULENAME);
+ cardstate = gigaset_initcs(driver, 2, 0, 0, cidmode,
+ GIGASET_MODULENAME);
if (!cardstate)
goto error;
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
* =====================================================================
- * ToDo: ...
- * =====================================================================
- * Version: $Id: common.c,v 1.104.4.22 2006/02/04 18:28:16 hjlipp Exp $
- * =====================================================================
*/
#include "gigaset.h"
} else {
numin = len < sizeof inbuf ? len : sizeof inbuf;
in = inbuf;
- if (copy_from_user(inbuf, (const unsigned char __user *) buf, numin)) {
+ if (copy_from_user(inbuf, (const unsigned char __user *) buf,
+ numin)) {
strncpy(inbuf, "<FAULT>", sizeof inbuf);
numin = sizeof "<FAULT>" - 1;
}
spin_lock_irqsave(&cs->lock, flags);
atomic_set(&cs->running, 0);
- spin_unlock_irqrestore(&cs->lock, flags); /* event handler and timer are not rescheduled below */
+ spin_unlock_irqrestore(&cs->lock, flags); /* event handler and timer are
+ not rescheduled below */
tasklet_kill(&cs->event_tasklet);
del_timer_sync(&cs->timer);
if (cs->ops->initbcshw(bcs))
return bcs;
-//error:
dbg(DEBUG_INIT, " failed");
dbg(DEBUG_INIT, " freeing bcs[%d]->skb", channel);
* parameters:
* drv hardware driver the device belongs to
* channels number of B channels supported by device
- * onechannel !=0: B channel data and AT commands share one communication channel
+ * onechannel !=0: B channel data and AT commands share one
+ * communication channel
* ==0: B channels have separate communication channels
* ignoreframes number of frames to ignore after setting up B channel
* cidmode !=0: start in CallID mode
atomic_set(&cs->ev_tail, 0);
atomic_set(&cs->ev_head, 0);
init_MUTEX_LOCKED(&cs->sem);
- tasklet_init(&cs->event_tasklet, &gigaset_handle_event, (unsigned long) cs);
+ tasklet_init(&cs->event_tasklet, &gigaset_handle_event,
+ (unsigned long) cs);
atomic_set(&cs->commands_pending, 0);
cs->cur_at_seq = 0;
cs->gotfwver = -1;
cs->curlen = 0;
cs->cmdbytes = 0;
- /*
- * Tell the ISDN4Linux subsystem (the LL) that
- * a driver for a USB-Device is available !
- * If this is done, "isdnctrl" is able to bind a device for this driver even
- * if no physical usb-device is currently connected.
- * But this device will just be accessable if a physical USB device is connected
- * (via "gigaset_probe") .
- */
dbg(DEBUG_INIT, "setting up iif");
if (!gigaset_register_to_LL(cs, modulename)) {
err("register_isdn=>error");
}
EXPORT_SYMBOL_GPL(gigaset_initcs);
-/* ReInitialize the b-channel structure */ /* e.g. called on hangup, disconnect */
+/* ReInitialize the b-channel structure */
+/* e.g. called on hangup, disconnect */
void gigaset_bcs_reinit(struct bc_state *bcs)
{
struct sk_buff *skb;
while ((skb = skb_dequeue(&bcs->squeue)) != NULL)
dev_kfree_skb(skb);
- spin_lock_irqsave(&cs->lock, flags); //FIXME
+ spin_lock_irqsave(&cs->lock, flags);
clear_at_state(&bcs->at_state);
bcs->at_state.ConState = 0;
bcs->at_state.timer_active = 0;
{
if (down_interruptible(&cs->sem))
return 0;
- //info("USB device for Gigaset 307x now attached to Dev %d", ucs->minor);
atomic_set(&cs->connected, 1);
dbg(DEBUG_DRIVER, " flags 0x%02x", drv->flags[i]);
cs = drv->cs + i;
dbg(DEBUG_DRIVER, " cardstate %p", cs);
- dbg(DEBUG_DRIVER, " minor_index %u", cs->minor_index);
+ dbg(DEBUG_DRIVER, " minor_index %u",
+ cs->minor_index);
dbg(DEBUG_DRIVER, " driver %p", cs->driver);
dbg(DEBUG_DRIVER, " i4l id %d", cs->myid);
}
* parameters:
* minor First minor number
* minors Number of minors this driver can handle
- * procname Name of the driver (e.g. for /proc/tty/drivers, path in /proc/driver)
+ * procname Name of the driver
* devname Name of the device files (prefix without minor number)
* devfsname Devfs name of the device files without %d
* return value:
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
* =====================================================================
- * ToDo: ...
- * =====================================================================
- * Version: $Id: ev-layer.c,v 1.4.2.18 2006/02/04 18:28:16 hjlipp Exp $
- * =====================================================================
*/
#include "gigaset.h"
/* ========================================================== */
/* bit masks for pending commands */
-#define PC_INIT 0x004
-#define PC_DLE0 0x008
-#define PC_DLE1 0x010
-#define PC_CID 0x080
-#define PC_NOCID 0x100
-#define PC_HUP 0x002
-#define PC_DIAL 0x001
-#define PC_ACCEPT 0x040
-#define PC_SHUTDOWN 0x020
-#define PC_CIDMODE 0x200
-#define PC_UMMODE 0x400
+#define PC_DIAL 0x001
+#define PC_HUP 0x002
+#define PC_INIT 0x004
+#define PC_DLE0 0x008
+#define PC_DLE1 0x010
+#define PC_SHUTDOWN 0x020
+#define PC_ACCEPT 0x040
+#define PC_CID 0x080
+#define PC_NOCID 0x100
+#define PC_CIDMODE 0x200
+#define PC_UMMODE 0x400
/* types of modem responses */
-#define RT_NOTHING 0
-#define RT_ZSAU 1
-#define RT_RING 2
-#define RT_NUMBER 3
-#define RT_STRING 4
-#define RT_HEX 5
-#define RT_ZCAU 6
+#define RT_NOTHING 0
+#define RT_ZSAU 1
+#define RT_RING 2
+#define RT_NUMBER 3
+#define RT_STRING 4
+#define RT_HEX 5
+#define RT_ZCAU 6
/* Possible ASCII responses */
-#define RSP_OK 0
-//#define RSP_BUSY 1
-//#define RSP_CONNECT 2
-#define RSP_ZGCI 3
-#define RSP_RING 4
-#define RSP_ZAOC 5
-#define RSP_ZCSTR 6
-#define RSP_ZCFGT 7
-#define RSP_ZCFG 8
-#define RSP_ZCCR 9
-#define RSP_EMPTY 10
-#define RSP_ZLOG 11
-#define RSP_ZCAU 12
-#define RSP_ZMWI 13
-#define RSP_ZABINFO 14
-#define RSP_ZSMLSTCHG 15
-#define RSP_VAR 100
-#define RSP_ZSAU (RSP_VAR + VAR_ZSAU)
-#define RSP_ZDLE (RSP_VAR + VAR_ZDLE)
-#define RSP_ZVLS (RSP_VAR + VAR_ZVLS)
-#define RSP_ZCTP (RSP_VAR + VAR_ZCTP)
-#define RSP_STR (RSP_VAR + VAR_NUM)
-#define RSP_NMBR (RSP_STR + STR_NMBR)
-#define RSP_ZCPN (RSP_STR + STR_ZCPN)
-#define RSP_ZCON (RSP_STR + STR_ZCON)
-#define RSP_ZBC (RSP_STR + STR_ZBC)
-#define RSP_ZHLC (RSP_STR + STR_ZHLC)
-#define RSP_ERROR -1 /* ERROR */
-#define RSP_WRONG_CID -2 /* unknown cid in cmd */
-//#define RSP_EMPTY -3
-#define RSP_UNKNOWN -4 /* unknown response */
-#define RSP_FAIL -5 /* internal error */
-#define RSP_INVAL -6 /* invalid response */
-
-#define RSP_NONE -19
-#define RSP_STRING -20
-#define RSP_NULL -21
-//#define RSP_RETRYFAIL -22
-//#define RSP_RETRY -23
-//#define RSP_SKIP -24
-#define RSP_INIT -27
-#define RSP_ANY -26
-#define RSP_LAST -28
-#define RSP_NODEV -9
+#define RSP_OK 0
+//#define RSP_BUSY 1
+//#define RSP_CONNECT 2
+#define RSP_ZGCI 3
+#define RSP_RING 4
+#define RSP_ZAOC 5
+#define RSP_ZCSTR 6
+#define RSP_ZCFGT 7
+#define RSP_ZCFG 8
+#define RSP_ZCCR 9
+#define RSP_EMPTY 10
+#define RSP_ZLOG 11
+#define RSP_ZCAU 12
+#define RSP_ZMWI 13
+#define RSP_ZABINFO 14
+#define RSP_ZSMLSTCHG 15
+#define RSP_VAR 100
+#define RSP_ZSAU (RSP_VAR + VAR_ZSAU)
+#define RSP_ZDLE (RSP_VAR + VAR_ZDLE)
+#define RSP_ZVLS (RSP_VAR + VAR_ZVLS)
+#define RSP_ZCTP (RSP_VAR + VAR_ZCTP)
+#define RSP_STR (RSP_VAR + VAR_NUM)
+#define RSP_NMBR (RSP_STR + STR_NMBR)
+#define RSP_ZCPN (RSP_STR + STR_ZCPN)
+#define RSP_ZCON (RSP_STR + STR_ZCON)
+#define RSP_ZBC (RSP_STR + STR_ZBC)
+#define RSP_ZHLC (RSP_STR + STR_ZHLC)
+#define RSP_ERROR -1 /* ERROR */
+#define RSP_WRONG_CID -2 /* unknown cid in cmd */
+//#define RSP_EMPTY -3
+#define RSP_UNKNOWN -4 /* unknown response */
+#define RSP_FAIL -5 /* internal error */
+#define RSP_INVAL -6 /* invalid response */
+
+#define RSP_NONE -19
+#define RSP_STRING -20
+#define RSP_NULL -21
+//#define RSP_RETRYFAIL -22
+//#define RSP_RETRY -23
+//#define RSP_SKIP -24
+#define RSP_INIT -27
+#define RSP_ANY -26
+#define RSP_LAST -28
+#define RSP_NODEV -9
/* actions for process_response */
#define ACT_NOTHING 0
#define ACT_DISCONNECT 20
#define ACT_CONNECT 21
#define ACT_REMOTEREJECT 22
-#define ACT_CONNTIMEOUT 23
+#define ACT_CONNTIMEOUT 23
#define ACT_REMOTEHUP 24
#define ACT_ABORTHUP 25
#define ACT_ICALL 26
#define ACT_ERROR 35
#define ACT_ABORTCID 36
#define ACT_ZCAU 37
-#define ACT_NOTIFY_BC_DOWN 38
-#define ACT_NOTIFY_BC_UP 39
-#define ACT_DIAL 40
-#define ACT_ACCEPT 41
-#define ACT_PROTO_L2 42
-#define ACT_HUP 43
-#define ACT_IF_LOCK 44
-#define ACT_START 45
-#define ACT_STOP 46
-#define ACT_FAKEDLE0 47
-#define ACT_FAKEHUP 48
-#define ACT_FAKESDOWN 49
-#define ACT_SHUTDOWN 50
-#define ACT_PROC_CIDMODE 51
-#define ACT_UMODESET 52
-#define ACT_FAILUMODE 53
-#define ACT_CMODESET 54
-#define ACT_FAILCMODE 55
-#define ACT_IF_VER 56
+#define ACT_NOTIFY_BC_DOWN 38
+#define ACT_NOTIFY_BC_UP 39
+#define ACT_DIAL 40
+#define ACT_ACCEPT 41
+#define ACT_PROTO_L2 42
+#define ACT_HUP 43
+#define ACT_IF_LOCK 44
+#define ACT_START 45
+#define ACT_STOP 46
+#define ACT_FAKEDLE0 47
+#define ACT_FAKEHUP 48
+#define ACT_FAKESDOWN 49
+#define ACT_SHUTDOWN 50
+#define ACT_PROC_CIDMODE 51
+#define ACT_UMODESET 52
+#define ACT_FAILUMODE 53
+#define ACT_CMODESET 54
+#define ACT_FAILCMODE 55
+#define ACT_IF_VER 56
#define ACT_CMD 100
/* at command sequences */
-#define SEQ_NONE 0
-#define SEQ_INIT 100
-#define SEQ_DLE0 200
-#define SEQ_DLE1 250
-#define SEQ_CID 300
-#define SEQ_NOCID 350
-#define SEQ_HUP 400
-#define SEQ_DIAL 600
-#define SEQ_ACCEPT 720
-#define SEQ_SHUTDOWN 500
-#define SEQ_CIDMODE 10
-#define SEQ_UMMODE 11
+#define SEQ_NONE 0
+#define SEQ_INIT 100
+#define SEQ_DLE0 200
+#define SEQ_DLE1 250
+#define SEQ_CID 300
+#define SEQ_NOCID 350
+#define SEQ_HUP 400
+#define SEQ_DIAL 600
+#define SEQ_ACCEPT 720
+#define SEQ_SHUTDOWN 500
+#define SEQ_CIDMODE 10
+#define SEQ_UMMODE 11
// 100: init, 200: dle0, 250:dle1, 300: get cid (dial), 350: "hup" (no cid), 400: hup, 500: reset, 600: dial, 700: ring
#if 0
-static struct reply_t tab_nocid[]= /* no dle mode */ //FIXME aenderungen uebernehmen
+static struct reply_t tab_nocid[]= /* no dle mode */ //FIXME
{
/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
{RSP_LAST,0,0,0,0,0,0}
};
-static struct reply_t tab_cid[] = /* no dle mode */ //FIXME aenderungen uebernehmen
+static struct reply_t tab_cid[] = /* no dle mode */ //FIXME
{
/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
static struct resp_type_t resp_type[]=
{
- /*{"", RSP_EMPTY, RT_NOTHING},*/
- {"OK", RSP_OK, RT_NOTHING},
- {"ERROR", RSP_ERROR, RT_NOTHING},
- {"ZSAU", RSP_ZSAU, RT_ZSAU},
- {"ZCAU", RSP_ZCAU, RT_ZCAU},
- {"RING", RSP_RING, RT_RING},
- {"ZGCI", RSP_ZGCI, RT_NUMBER},
- {"ZVLS", RSP_ZVLS, RT_NUMBER},
- {"ZCTP", RSP_ZCTP, RT_NUMBER},
- {"ZDLE", RSP_ZDLE, RT_NUMBER},
- {"ZCFGT", RSP_ZCFGT, RT_NUMBER},
- {"ZCCR", RSP_ZCCR, RT_NUMBER},
- {"ZMWI", RSP_ZMWI, RT_NUMBER},
- {"ZHLC", RSP_ZHLC, RT_STRING},
- {"ZBC", RSP_ZBC, RT_STRING},
- {"NMBR", RSP_NMBR, RT_STRING},
- {"ZCPN", RSP_ZCPN, RT_STRING},
- {"ZCON", RSP_ZCON, RT_STRING},
- {"ZAOC", RSP_ZAOC, RT_STRING},
- {"ZCSTR", RSP_ZCSTR, RT_STRING},
- {"ZCFG", RSP_ZCFG, RT_HEX},
- {"ZLOG", RSP_ZLOG, RT_NOTHING},
- {"ZABINFO", RSP_ZABINFO, RT_NOTHING},
- {"ZSMLSTCHG", RSP_ZSMLSTCHG, RT_NOTHING},
+ /*{"", RSP_EMPTY, RT_NOTHING},*/
+ {"OK", RSP_OK, RT_NOTHING},
+ {"ERROR", RSP_ERROR, RT_NOTHING},
+ {"ZSAU", RSP_ZSAU, RT_ZSAU},
+ {"ZCAU", RSP_ZCAU, RT_ZCAU},
+ {"RING", RSP_RING, RT_RING},
+ {"ZGCI", RSP_ZGCI, RT_NUMBER},
+ {"ZVLS", RSP_ZVLS, RT_NUMBER},
+ {"ZCTP", RSP_ZCTP, RT_NUMBER},
+ {"ZDLE", RSP_ZDLE, RT_NUMBER},
+ {"ZCFGT", RSP_ZCFGT, RT_NUMBER},
+ {"ZCCR", RSP_ZCCR, RT_NUMBER},
+ {"ZMWI", RSP_ZMWI, RT_NUMBER},
+ {"ZHLC", RSP_ZHLC, RT_STRING},
+ {"ZBC", RSP_ZBC, RT_STRING},
+ {"NMBR", RSP_NMBR, RT_STRING},
+ {"ZCPN", RSP_ZCPN, RT_STRING},
+ {"ZCON", RSP_ZCON, RT_STRING},
+ {"ZAOC", RSP_ZAOC, RT_STRING},
+ {"ZCSTR", RSP_ZCSTR, RT_STRING},
+ {"ZCFG", RSP_ZCFG, RT_HEX},
+ {"ZLOG", RSP_ZLOG, RT_NOTHING},
+ {"ZABINFO", RSP_ZABINFO, RT_NOTHING},
+ {"ZSMLSTCHG", RSP_ZSMLSTCHG, RT_NOTHING},
{NULL,0,0}
};
dbg(DEBUG_CMD, "Scheduling PC_INIT");
}
-/* Add "AT" to a command, add the cid, dle encode it, send the result to the hardware. */
+/* Add "AT" to a command, add the cid, dle encode it, send the result to the
+ hardware. */
static void send_command(struct cardstate *cs, const char *cmd, int cid,
int dle, gfp_t kmallocflags)
{
at_state->pending_commands |= PC_CID;
dbg(DEBUG_CMD, "Scheduling PC_CID");
-//#ifdef GIG_MAYINITONDIAL
-// if (atomic_read(&cs->MState) == MS_UNKNOWN) {
-// cs->at_state.pending_commands |= PC_INIT;
-// dbg(DEBUG_CMD, "Scheduling PC_INIT");
-// }
-//#endif
- atomic_set(&cs->commands_pending, 1); //FIXME
+ atomic_set(&cs->commands_pending, 1);
return;
error:
at_state->pending_commands |= PC_NOCID;
dbg(DEBUG_CMD, "Scheduling PC_NOCID");
- atomic_set(&cs->commands_pending, 1); //FIXME
+ atomic_set(&cs->commands_pending, 1);
return;
}
if (retval == 0) {
at_state->pending_commands |= PC_ACCEPT;
dbg(DEBUG_CMD, "Scheduling PC_ACCEPT");
- atomic_set(&cs->commands_pending, 1); //FIXME
+ atomic_set(&cs->commands_pending, 1);
} else {
//FIXME
at_state->pending_commands |= PC_HUP;
dbg(DEBUG_CMD, "Scheduling PC_HUP");
- atomic_set(&cs->commands_pending, 1); //FIXME
+ atomic_set(&cs->commands_pending, 1);
}
}
if (atomic_read(&cs->mstate) == MS_READY) {
atomic_set(&cs->mstate, MS_SHUTDOWN);
cs->at_state.pending_commands |= PC_SHUTDOWN;
- atomic_set(&cs->commands_pending, 1); //FIXME
- dbg(DEBUG_CMD, "Scheduling PC_SHUTDOWN"); //FIXME
- //gigaset_schedule_event(cs); //FIXME
+ atomic_set(&cs->commands_pending, 1);
+ dbg(DEBUG_CMD, "Scheduling PC_SHUTDOWN");
} else
finish_shutdown(cs);
}
mode = atomic_read(&cs->mode);
atomic_set(&cs->mstate, MS_LOCKED);
atomic_set(&cs->mode, M_UNKNOWN);
- //FIXME reset card state / at states / bcs states
return mode;
}
atomic_set(&cs->mstate, MS_UNINITIALIZED);
atomic_set(&cs->mode, M_UNKNOWN);
gigaset_free_channels(cs);
- //FIXME reset card state / at states / bcs states
if (atomic_read(&cs->connected))
schedule_init(cs, MS_INIT);
at_state->waiting = 1;
break;
case ACT_INIT:
- //FIXME setup everything
cs->at_state.pending_commands &= ~PC_INIT;
cs->cur_at_seq = SEQ_NONE;
atomic_set(&cs->mode, M_UNIMODEM);
break;
}
cs->at_state.pending_commands |= PC_CIDMODE;
- atomic_set(&cs->commands_pending, 1); //FIXME
+ atomic_set(&cs->commands_pending, 1);
dbg(DEBUG_CMD, "Scheduling PC_CIDMODE");
break;
case ACT_FAILINIT:
at_state->pending_commands |= PC_HUP;
atomic_set(&cs->commands_pending, 1);
break;
- case ACT_GETSTRING: /* warning: RING, ZDLE, ... are not handled properly any more */
+ case ACT_GETSTRING: /* warning: RING, ZDLE, ...
+ are not handled properly any more */
at_state->getstring = 1;
break;
case ACT_SETVER:
break;
case ACT_HUP:
at_state->pending_commands |= PC_HUP;
- atomic_set(&cs->commands_pending, 1); //FIXME
+ atomic_set(&cs->commands_pending, 1);
dbg(DEBUG_CMD, "Scheduling PC_HUP");
break;
dbg(DEBUG_ANY, "stopped waiting");
}
- /* if the response belongs to a variable in at_state->int_var[VAR_XXXX] or at_state->str_var[STR_XXXX], set it */
+ /* if the response belongs to a variable in at_state->int_var[VAR_XXXX]
+ or at_state->str_var[STR_XXXX], set it */
if (ev->type >= RSP_VAR && ev->type < RSP_VAR + VAR_NUM) {
index = ev->type - RSP_VAR;
at_state->int_var[index] = ev->parameter;
index = ev->type - RSP_STR;
kfree(at_state->str_var[index]);
at_state->str_var[index] = ev->ptr;
- ev->ptr = NULL; /* prevent process_events() from deallocating ptr */
+ ev->ptr = NULL; /* prevent process_events() from
+ deallocating ptr */
}
if (ev->type == EV_TIMEOUT || ev->type == RSP_STRING)
at_state->getstring = 0;
- /* Search row in dial array which matches modem response and current constate */
+ /* Search row in dial array which matches modem response and current
+ constate */
for (;; rep++) {
rcode = rep->resp_code;
/* dbg (DEBUG_ANY, "rcode %d", rcode); */
if (cs->at_state.pending_commands & PC_CIDMODE) {
cs->at_state.pending_commands &= ~PC_CIDMODE;
if (atomic_read(&cs->mode) == M_UNIMODEM) {
-#if 0
- cs->retry_count = 2;
-#else
cs->retry_count = 1;
-#endif
schedule_sequence(cs, &cs->at_state, SEQ_CIDMODE);
return;
}
-/* Siemens Gigaset 307x driver
+/*
+ * Siemens Gigaset 307x driver
* Common header file for all connection variants
*
* Written by Stefan Eilers <Eilers.Stefan@epost.de>
* and Hansjoerg Lipp <hjlipp@web.de>
*
- * Version: $Id: gigaset.h,v 1.97.4.26 2006/02/04 18:28:16 hjlipp Exp $
- * ===========================================================================
+ * =====================================================================
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ * =====================================================================
*/
#ifndef GIGASET_H
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/types.h>
-#include <asm/atomic.h>
#include <linux/spinlock.h>
#include <linux/isdnif.h>
#include <linux/usb.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/list.h>
+#include <asm/atomic.h>
#define GIG_VERSION {0,5,0,0}
#define GIG_COMPAT {0,4,0,0}
-#define MAX_REC_PARAMS 10 /* Max. number of params in response string */
-#define MAX_RESP_SIZE 512 /* Max. size of a response string */
-#define HW_HDR_LEN 2 /* Header size used to store ack info */
+#define MAX_REC_PARAMS 10 /* Max. number of params in response string */
+#define MAX_RESP_SIZE 512 /* Max. size of a response string */
+#define HW_HDR_LEN 2 /* Header size used to store ack info */
-#define MAX_EVENTS 64 /* size of event queue */
+#define MAX_EVENTS 64 /* size of event queue */
#define RBUFSIZE 8192
-#define SBUFSIZE 4096 /* sk_buff payload size */
+#define SBUFSIZE 4096 /* sk_buff payload size */
-#define MAX_BUF_SIZE (SBUFSIZE - 2) /* Max. size of a data packet from LL */
-#define TRANSBUFSIZE 768 /* bytes per skb for transparent receive */
+#define TRANSBUFSIZE 768 /* bytes per skb for transparent receive */
+#define MAX_BUF_SIZE (SBUFSIZE - 2) /* Max. size of a data packet from LL */
/* compile time options */
#define GIG_MAJOR 0
#define MAXACT 3
-#define IFNULL(a) if (unlikely(!(a)))
-#define IFNULLRET(a) if (unlikely(!(a))) {err("%s==NULL at %s:%d!", #a, __FILE__, __LINE__); return; }
-#define IFNULLRETVAL(a,b) if (unlikely(!(a))) {err("%s==NULL at %s:%d!", #a, __FILE__, __LINE__); return (b); }
-#define IFNULLCONT(a) if (unlikely(!(a))) {err("%s==NULL at %s:%d!", #a, __FILE__, __LINE__); continue; }
-#define IFNULLGOTO(a,b) if (unlikely(!(a))) {err("%s==NULL at %s:%d!", #a, __FILE__, __LINE__); goto b; }
+#define IFNULL(a) \
+ if (unlikely(!(a)))
+
+#define IFNULLRET(a) \
+ if (unlikely(!(a))) { \
+ err("%s==NULL at %s:%d!", #a, __FILE__, __LINE__); \
+ return; \
+ }
+
+#define IFNULLRETVAL(a,b) \
+ if (unlikely(!(a))) { \
+ err("%s==NULL at %s:%d!", #a, __FILE__, __LINE__); \
+ return (b); \
+ }
+
+#define IFNULLCONT(a) \
+ if (unlikely(!(a))) { \
+ err("%s==NULL at %s:%d!", #a, __FILE__, __LINE__); \
+ continue; \
+ }
+
+#define IFNULLGOTO(a,b) \
+ if (unlikely(!(a))) { \
+ err("%s==NULL at %s:%d!", #a, __FILE__, __LINE__); \
+ goto b; \
+ }
extern int gigaset_debuglevel; /* "needs" cast to (enum debuglevel) */
-/* any combination of these can be given with the 'debug=' parameter to insmod, e.g.
- * 'insmod usb_gigaset.o debug=0x2c' will set DEBUG_OPEN, DEBUG_CMD and DEBUG_INTR. */
+/* any combination of these can be given with the 'debug=' parameter to insmod,
+ * e.g. 'insmod usb_gigaset.o debug=0x2c' will set DEBUG_OPEN, DEBUG_CMD and
+ * DEBUG_INTR.
+ */
enum debuglevel { /* up to 24 bits (atomic_t) */
- DEBUG_REG = 0x0002, /* serial port I/O register operations */
+ DEBUG_REG = 0x0002,/* serial port I/O register operations */
DEBUG_OPEN = 0x0004, /* open/close serial port */
DEBUG_INTR = 0x0008, /* interrupt processing */
- DEBUG_INTR_DUMP = 0x0010, /* Activating hexdump debug output on interrupt
- requests, not available as run-time option */
+ DEBUG_INTR_DUMP = 0x0010, /* Activating hexdump debug output on
+ interrupt requests, not available as
+ run-time option */
DEBUG_CMD = 0x00020, /* sent/received LL commands */
DEBUG_STREAM = 0x00040, /* application data stream I/O events */
DEBUG_STREAM_DUMP = 0x00080, /* application data stream content */
DEBUG_LLDATA = 0x00100, /* sent/received LL data */
- DEBUG_INTR_0 = 0x00200, /* serial port output interrupt processing */
+ DEBUG_INTR_0 = 0x00200, /* serial port interrupt processing */
DEBUG_DRIVER = 0x00400, /* driver structure */
DEBUG_HDLC = 0x00800, /* M10x HDLC processing */
DEBUG_WRITE = 0x01000, /* M105 data write */
- DEBUG_TRANSCMD = 0x02000, /*AT-COMMANDS+RESPONSES*/
- DEBUG_MCMD = 0x04000, /*COMMANDS THAT ARE SENT VERY OFTEN*/
- DEBUG_INIT = 0x08000, /* (de)allocation+initialization of data structures */
+ DEBUG_TRANSCMD = 0x02000, /* AT-COMMANDS+RESPONSES */
+ DEBUG_MCMD = 0x04000, /* COMMANDS THAT ARE SENT VERY OFTEN */
+ DEBUG_INIT = 0x08000, /* (de)allocation+initialization of data
+ structures */
DEBUG_LOCK = 0x10000, /* semaphore operations */
DEBUG_OUTPUT = 0x20000, /* output to device */
DEBUG_ISO = 0x40000, /* isochronous transfers */
DEBUG_IF = 0x80000, /* character device operations */
- DEBUG_USBREQ = 0x100000, /* USB communication (except payload data) */
- DEBUG_LOCKCMD = 0x200000, /* AT commands and responses when MS_LOCKED */
+ DEBUG_USBREQ = 0x100000, /* USB communication (except payload
+ data) */
+ DEBUG_LOCKCMD = 0x200000, /* AT commands and responses when
+ MS_LOCKED */
- DEBUG_ANY = 0x3fffff, /* print message if any of the others is activated */
+ DEBUG_ANY = 0x3fffff, /* print message if any of the others is
+ activated */
};
#ifdef CONFIG_GIGASET_DEBUG
#define DEBUG_DEFAULT (DEBUG_INIT | DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ)
-//#define DEBUG_DEFAULT (DEBUG_LOCK | DEBUG_INIT | DEBUG_TRANSCMD | DEBUG_CMD | DEBUF_IF | DEBUG_DRIVER | DEBUG_OUTPUT | DEBUG_INTR)
#else
#define DEBUG_DEFAULT 0
#endif
-/* redefine syslog macros to prepend module name instead of entire source path */
-/* The space before the comma in ", ##" is needed by gcc 2.95 */
+/* redefine syslog macros to prepend module name instead of entire
+ * source path */
#undef info
-#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg)
+#define info(format, arg...) \
+ printk(KERN_INFO "%s: " format "\n", \
+ THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg)
#undef notice
-#define notice(format, arg...) printk(KERN_NOTICE "%s: " format "\n", THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg)
+#define notice(format, arg...) \
+ printk(KERN_NOTICE "%s: " format "\n", \
+ THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg)
#undef warn
-#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg)
+#define warn(format, arg...) \
+ printk(KERN_WARNING "%s: " format "\n", \
+ THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg)
#undef err
-#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg)
+#define err(format, arg...) \
+ printk(KERN_ERR "%s: " format "\n", \
+ THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg)
#undef dbg
#ifdef CONFIG_GIGASET_DEBUG
-#define dbg(level, format, arg...) do { if (unlikely(((enum debuglevel)gigaset_debuglevel) & (level))) \
- printk(KERN_DEBUG "%s: " format "\n", THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" , ## arg); } while (0)
+#define dbg(level, format, arg...) \
+ do { \
+ if (unlikely(((enum debuglevel)gigaset_debuglevel) & (level))) \
+ printk(KERN_DEBUG "%s: " format "\n", \
+ THIS_MODULE ? THIS_MODULE->name : "gigaset_hw" \
+ , ## arg); \
+ } while (0)
#else
#define dbg(level, format, arg...) do {} while (0)
#endif
#define ZSAU_UNKNOWN -1
/* USB control transfer requests */
-#define OUT_VENDOR_REQ (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
-#define IN_VENDOR_REQ (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
+#define OUT_VENDOR_REQ (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
+#define IN_VENDOR_REQ (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
/* int-in-events 3070 */
#define HD_B1_FLOW_CONTROL 0x80
#define HD_B2_FLOW_CONTROL 0x81
-#define HD_RECEIVEATDATA_ACK (0x35) // 3070 // att: HD_RECEIVE>>AT<<DATA_ACK
+#define HD_RECEIVEATDATA_ACK (0x35) // 3070
+ // att: HD_RECEIVE>>AT<<DATA_ACK
#define HD_READY_SEND_ATDATA (0x36) // 3070
#define HD_OPEN_ATCHANNEL_ACK (0x37) // 3070
#define HD_CLOSE_ATCHANNEL_ACK (0x38) // 3070
#define HD_CLOSE_ATCHANNEL (0x29) // 3070
/* USB frames for isochronous transfer */
-#define BAS_FRAMETIME 1 /* number of milliseconds between frames */
-#define BAS_NUMFRAMES 8 /* number of frames per URB */
-#define BAS_MAXFRAME 16 /* allocated bytes per frame */
-#define BAS_NORMFRAME 8 /* send size without flow control */
-#define BAS_HIGHFRAME 10 /* " " with positive flow control */
-#define BAS_LOWFRAME 5 /* " " with negative flow control */
-#define BAS_CORRFRAMES 4 /* flow control multiplicator */
-
-#define BAS_INBUFSIZE (BAS_MAXFRAME * BAS_NUMFRAMES) /* size of isochronous input buffer per URB */
-#define BAS_OUTBUFSIZE 4096 /* size of common isochronous output buffer */
-#define BAS_OUTBUFPAD BAS_MAXFRAME /* size of pad area for isochronous output buffer */
+#define BAS_FRAMETIME 1 /* number of milliseconds between frames */
+#define BAS_NUMFRAMES 8 /* number of frames per URB */
+#define BAS_MAXFRAME 16 /* allocated bytes per frame */
+#define BAS_NORMFRAME 8 /* send size without flow control */
+#define BAS_HIGHFRAME 10 /* " " with positive flow control */
+#define BAS_LOWFRAME 5 /* " " with negative flow control */
+#define BAS_CORRFRAMES 4 /* flow control multiplicator */
+
+#define BAS_INBUFSIZE (BAS_MAXFRAME * BAS_NUMFRAMES)
+ /* size of isoc in buf per URB */
+#define BAS_OUTBUFSIZE 4096 /* size of common isoc out buffer */
+#define BAS_OUTBUFPAD BAS_MAXFRAME /* size of pad area for isoc out buf */
#define BAS_INURBS 3
#define BAS_OUTURBS 3
#define AT_NUM 7
/* variables in struct at_state_t */
-#define VAR_ZSAU 0
-#define VAR_ZDLE 1
-#define VAR_ZVLS 2
-#define VAR_ZCTP 3
-#define VAR_NUM 4
-
-#define STR_NMBR 0
-#define STR_ZCPN 1
-#define STR_ZCON 2
-#define STR_ZBC 3
-#define STR_ZHLC 4
-#define STR_NUM 5
-
-#define EV_TIMEOUT -105
-#define EV_IF_VER -106
-#define EV_PROC_CIDMODE -107
-#define EV_SHUTDOWN -108
-#define EV_START -110
-#define EV_STOP -111
-#define EV_IF_LOCK -112
-#define EV_PROTO_L2 -113
-#define EV_ACCEPT -114
-#define EV_DIAL -115
-#define EV_HUP -116
-#define EV_BC_OPEN -117
-#define EV_BC_CLOSED -118
+#define VAR_ZSAU 0
+#define VAR_ZDLE 1
+#define VAR_ZVLS 2
+#define VAR_ZCTP 3
+#define VAR_NUM 4
+
+#define STR_NMBR 0
+#define STR_ZCPN 1
+#define STR_ZCON 2
+#define STR_ZBC 3
+#define STR_ZHLC 4
+#define STR_NUM 5
+
+#define EV_TIMEOUT -105
+#define EV_IF_VER -106
+#define EV_PROC_CIDMODE -107
+#define EV_SHUTDOWN -108
+#define EV_START -110
+#define EV_STOP -111
+#define EV_IF_LOCK -112
+#define EV_PROTO_L2 -113
+#define EV_ACCEPT -114
+#define EV_DIAL -115
+#define EV_HUP -116
+#define EV_BC_OPEN -117
+#define EV_BC_CLOSED -118
/* input state */
-#define INS_command 0x0001
-#define INS_DLE_char 0x0002
-#define INS_byte_stuff 0x0004
-#define INS_have_data 0x0008
-#define INS_skip_frame 0x0010
-#define INS_DLE_command 0x0020
+#define INS_command 0x0001
+#define INS_DLE_char 0x0002
+#define INS_byte_stuff 0x0004
+#define INS_have_data 0x0008
+#define INS_skip_frame 0x0010
+#define INS_DLE_command 0x0020
#define INS_flag_hunt 0x0040
/* channel state */
#define CHS_B_UP 0x02
#define CHS_NOTIFY_LL 0x04
-#define ICALL_REJECT 0
-#define ICALL_ACCEPT 1
-#define ICALL_IGNORE 2
+#define ICALL_REJECT 0
+#define ICALL_ACCEPT 1
+#define ICALL_IGNORE 2
/* device state */
-#define MS_UNINITIALIZED 0
-#define MS_INIT 1
-#define MS_LOCKED 2
-#define MS_SHUTDOWN 3
-#define MS_RECOVER 4
-#define MS_READY 5
+#define MS_UNINITIALIZED 0
+#define MS_INIT 1
+#define MS_LOCKED 2
+#define MS_SHUTDOWN 3
+#define MS_RECOVER 4
+#define MS_READY 5
/* mode */
-#define M_UNKNOWN 0
-#define M_CONFIG 1
-#define M_UNIMODEM 2
-#define M_CID 3
+#define M_UNKNOWN 0
+#define M_CONFIG 1
+#define M_UNIMODEM 2
+#define M_CID 3
/* start mode */
-#define SM_LOCKED 0
-#define SM_ISDN 1 /* default */
+#define SM_LOCKED 0
+#define SM_ISDN 1 /* default */
struct gigaset_ops;
struct gigaset_driver;
struct bas_bc_state;
struct reply_t {
- int resp_code; /* RSP_XXXX */
- int min_ConState; /* <0 => ignore */
- int max_ConState; /* <0 => ignore */
- int parameter; /* e.g. ZSAU_XXXX <0: ignore*/
- int new_ConState; /* <0 => ignore */
- int timeout; /* >0 => *HZ; <=0 => TOUT_XXXX*/
- int action[MAXACT]; /* ACT_XXXX */
- char *command; /* NULL==none */
+ int resp_code; /* RSP_XXXX */
+ int min_ConState; /* <0 => ignore */
+ int max_ConState; /* <0 => ignore */
+ int parameter; /* e.g. ZSAU_XXXX <0: ignore*/
+ int new_ConState; /* <0 => ignore */
+ int timeout; /* >0 => *HZ; <=0 => TOUT_XXXX*/
+ int action[MAXACT]; /* ACT_XXXX */
+ char *command; /* NULL==none */
};
extern struct reply_t gigaset_tab_cid_m10x[];
extern struct reply_t gigaset_tab_nocid_m10x[];
struct inbuf_t {
- unsigned char *rcvbuf; /* usb-gigaset receive buffer */
+ unsigned char *rcvbuf; /* usb-gigaset receive buffer */
struct bc_state *bcs;
- struct cardstate *cs;
- int inputstate;
-
- atomic_t head, tail;
- unsigned char data[RBUFSIZE];
+ struct cardstate *cs;
+ int inputstate;
+ atomic_t head, tail;
+ unsigned char data[RBUFSIZE];
};
/* isochronous write buffer structure
* if writesem <= 0, data[write..read-1] is currently being written to
* - idle contains the byte value to repeat when the end of valid data is
* reached; if nextread==write (buffer contains no data to send), either the
- * BAS_OUTBUFPAD bytes immediately before data[write] (if write>=BAS_OUTBUFPAD)
- * or those of the pad area (if write<BAS_OUTBUFPAD) are also filled with that
- * value
- * - optionally, the following statistics on the buffer's usage can be collected:
- * maxfill: maximum number of bytes occupied
- * idlefills: number of times a frame of idle bytes is prepared
- * emptygets: number of times the buffer was empty when a data frame was requested
+ * BAS_OUTBUFPAD bytes immediately before data[write] (if
+ * write>=BAS_OUTBUFPAD) or those of the pad area (if write<BAS_OUTBUFPAD)
+ * are also filled with that value
+ * - optionally, the following statistics on the buffer's usage can be
+ * collected:
+ * maxfill: maximum number of bytes occupied
+ * idlefills: number of times a frame of idle bytes is prepared
+ * emptygets: number of times the buffer was empty when a data frame was
+ * requested
* backtoback: number of times two data packets were entered into the buffer
- * without intervening idle flags
- * nakedback: set if no idle flags have been inserted since the last data packet
+ * without intervening idle flags
+ * nakedback: set if no idle flags have been inserted since the last data
+ * packet
*/
struct isowbuf_t {
atomic_t read;
* it is currently assigned a B channel
*/
struct at_state_t {
- struct list_head list;
- int waiting;
- int getstring;
+ struct list_head list;
+ int waiting;
+ int getstring;
atomic_t timer_index;
unsigned long timer_expires;
int timer_active;
- unsigned int ConState; /* State of connection */
- struct reply_t *replystruct;
- int cid;
- int int_var[VAR_NUM]; /* see VAR_XXXX */
- char *str_var[STR_NUM]; /* see STR_XXXX */
- unsigned pending_commands; /* see PC_XXXX */
- atomic_t seq_index;
-
- struct cardstate *cs;
- struct bc_state *bcs;
+ unsigned int ConState; /* State of connection */
+ struct reply_t *replystruct;
+ int cid;
+ int int_var[VAR_NUM]; /* see VAR_XXXX */
+ char *str_var[STR_NUM]; /* see STR_XXXX */
+ unsigned pending_commands; /* see PC_XXXX */
+ atomic_t seq_index;
+
+ struct cardstate *cs;
+ struct bc_state *bcs;
};
struct resp_type_t {
unsigned char *response;
- int resp_code; /* RSP_XXXX */
- int type; /* RT_XXXX */
-};
-
-struct prot_skb {
- atomic_t empty;
- struct semaphore *sem;
- struct sk_buff *skb;
+ int resp_code; /* RSP_XXXX */
+ int type; /* RT_XXXX */
};
struct event_t {
/* This buffer holds all information about the used B-Channel */
struct bc_state {
- struct sk_buff *tx_skb; /* Current transfer buffer to modem */
- struct sk_buff_head squeue; /* B-Channel send Queue */
+ struct sk_buff *tx_skb; /* Current transfer buffer to modem */
+ struct sk_buff_head squeue; /* B-Channel send Queue */
/* Variables for debugging .. */
- int corrupted; /* Counter for corrupted packages */
- int trans_down; /* Counter of packages (downstream) */
- int trans_up; /* Counter of packages (upstream) */
+ int corrupted; /* Counter for corrupted packages */
+ int trans_down; /* Counter of packages (downstream) */
+ int trans_up; /* Counter of packages (upstream) */
struct at_state_t at_state;
unsigned long rcvbytes;
__u16 fcs;
struct sk_buff *skb;
- int inputstate; /* see INS_XXXX */
+ int inputstate; /* see INS_XXXX */
int channel;
struct cardstate *cs;
- unsigned chstate; /* bitmap (CHS_*) */
+ unsigned chstate; /* bitmap (CHS_*) */
int ignore;
- unsigned proto2; /* Layer 2 protocol (ISDN_PROTO_L2_*) */
- char *commands[AT_NUM]; /* see AT_XXXX */
+ unsigned proto2; /* Layer 2 protocol (ISDN_PROTO_L2_*) */
+ char *commands[AT_NUM]; /* see AT_XXXX */
#ifdef CONFIG_GIGASET_DEBUG
int emptycount;
/* hardware drivers */
union {
- struct ser_bc_state *ser; /* private data of serial hardware driver */
- struct usb_bc_state *usb; /* private data of usb hardware driver */
- struct bas_bc_state *bas;
+ struct ser_bc_state *ser; /* serial hardware driver */
+ struct usb_bc_state *usb; /* usb hardware driver (m105) */
+ struct bas_bc_state *bas; /* usb hardware driver (base) */
} hw;
};
const struct gigaset_ops *ops;
/* Stuff to handle communication */
- //wait_queue_head_t initwait;
wait_queue_head_t waitqueue;
int waiting;
- atomic_t mode; /* see M_XXXX */
- atomic_t mstate; /* Modem state: see MS_XXXX */
- /* only changed by the event layer */
+ atomic_t mode; /* see M_XXXX */
+ atomic_t mstate; /* Modem state: see MS_XXXX */
+ /* only changed by the event layer */
int cmd_result;
int channels;
- struct bc_state *bcs; /* Array of struct bc_state */
+ struct bc_state *bcs; /* Array of struct bc_state */
- int onechannel; /* data and commands transmitted in one stream (M10x) */
+ int onechannel; /* data and commands transmitted in one
+ stream (M10x) */
spinlock_t lock;
- struct at_state_t at_state; /* at_state_t for cid == 0 */
- struct list_head temp_at_states; /* list of temporary "struct at_state_t"s without B channel */
+ struct at_state_t at_state; /* at_state_t for cid == 0 */
+ struct list_head temp_at_states;/* list of temporary "struct
+ at_state_t"s without B channel */
struct inbuf_t *inbuf;
unsigned fwver[4];
int gotfwver;
- atomic_t running; /* !=0 if events are handled */
- atomic_t connected; /* !=0 if hardware is connected */
+ atomic_t running; /* !=0 if events are handled */
+ atomic_t connected; /* !=0 if hardware is connected */
atomic_t cidmode;
- int myid; /* id for communication with LL */
+ int myid; /* id for communication with LL */
isdn_if iif;
struct reply_t *tabnocid;
struct reply_t *tabcid;
int cs_init;
- int ignoreframes; /* frames to ignore after setting up the B channel */
- struct semaphore sem; /* locks this structure: */
- /* connected is not changed, */
- /* hardware_up is not changed, */
- /* MState is not changed to or from MS_LOCKED */
+ int ignoreframes; /* frames to ignore after setting up the
+ B channel */
+ struct semaphore sem; /* locks this structure: */
+ /* connected is not changed, */
+ /* hardware_up is not changed, */
+ /* MState is not changed to or from
+ MS_LOCKED */
struct timer_list timer;
int retry_count;
- int dle; /* !=0 if modem commands/responses are dle encoded */
- int cur_at_seq; /* sequence of AT commands being processed */
- int curchannel; /* channel, those commands are meant for */
- atomic_t commands_pending; /* flag(s) in xxx.commands_pending have been set */
- struct tasklet_struct event_tasklet; /* tasklet for serializing AT commands. Scheduled
- * -> for modem reponses (and incomming data for M10x)
- * -> on timeout
- * -> after setting bits in xxx.at_state.pending_command
- * (e.g. command from LL) */
- struct tasklet_struct write_tasklet; /* tasklet for serial output
- * (not used in base driver) */
+ int dle; /* !=0 if modem commands/responses are
+ dle encoded */
+ int cur_at_seq; /* sequence of AT commands being
+ processed */
+ int curchannel; /* channel, those commands are meant
+ for */
+ atomic_t commands_pending; /* flag(s) in xxx.commands_pending have
+ been set */
+ struct tasklet_struct event_tasklet;
+ /* tasklet for serializing AT commands.
+ * Scheduled
+ * -> for modem reponses (and
+ * incomming data for M10x)
+ * -> on timeout
+ * -> after setting bits in
+ * xxx.at_state.pending_command
+ * (e.g. command from LL) */
+ struct tasklet_struct write_tasklet;
+ /* tasklet for serial output
+ * (not used in base driver) */
/* event queue */
struct event_t events[MAX_EVENTS];
/* hardware drivers */
union {
- struct usb_cardstate *usb; /* private data of USB hardware driver */
- struct ser_cardstate *ser; /* private data of serial hardware driver */
- struct bas_cardstate *bas; /* private data of base hardware driver */
+ struct usb_cardstate *usb; /* USB hardware driver (m105) */
+ struct ser_cardstate *ser; /* serial hardware driver */
+ struct bas_cardstate *bas; /* USB hardware driver (base) */
} hw;
};
struct gigaset_driver {
struct list_head list;
- spinlock_t lock; /* locks minor tables and blocked */
- //struct semaphore sem; /* locks this structure */
+ spinlock_t lock; /* locks minor tables and blocked */
struct tty_driver *tty;
unsigned have_tty;
unsigned minor;
struct isow_urbctx_t isoouturbs[BAS_OUTURBS];
struct isow_urbctx_t *isooutdone, *isooutfree, *isooutovfl;
struct isowbuf_t *isooutbuf;
- unsigned numsub; /* submitted URB counter (for diagnostic messages only) */
+ unsigned numsub; /* submitted URB counter (for
+ diagnostic messages only) */
struct tasklet_struct sent_tasklet;
/* isochronous input state */
struct urb *isoindone; /* completed isoc read URB */
int loststatus; /* status of dropped URB */
unsigned isoinlost; /* number of bytes lost */
- /* state of bit unstuffing algorithm (in addition to BC_state.inputstate) */
- unsigned seqlen; /* number of '1' bits not yet unstuffed */
- unsigned inbyte, inbits; /* collected bits for next byte */
+ /* state of bit unstuffing algorithm (in addition to
+ BC_state.inputstate) */
+ unsigned seqlen; /* number of '1' bits not yet
+ unstuffed */
+ unsigned inbyte, inbits; /* collected bits for next byte
+ */
/* statistics */
unsigned goodbytes; /* bytes correctly received */
- unsigned alignerrs; /* frames with incomplete byte at end */
+ unsigned alignerrs; /* frames with incomplete byte
+ at end */
unsigned fcserrs; /* FCS errors */
unsigned frameerrs; /* framing errors */
unsigned giants; /* long frames */
unsigned runts; /* short frames */
unsigned aborts; /* HDLC aborts */
- unsigned shared0s; /* '0' bits shared between flags */
- unsigned stolen0s; /* '0' stuff bits also serving as leading flag bits */
+ unsigned shared0s; /* '0' bits shared between flags
+ */
+ unsigned stolen0s; /* '0' stuff bits also serving
+ as leading flag bits */
struct tasklet_struct rcvd_tasklet;
};
struct gigaset_ops {
- /* Called from ev-layer.c/interface.c for sending AT commands to the device */
+ /* Called from ev-layer.c/interface.c for sending AT commands to the
+ device */
int (*write_cmd)(struct cardstate *cs,
const unsigned char *buf, int len,
struct tasklet_struct *wake_tasklet);
/* Called by gigaset_freecs() for freeing bcs->hw.xxx */
int (*freebcshw)(struct bc_state *bcs);
- /* Called by gigaset_stop() or gigaset_bchannel_down() for resetting bcs->hw.xxx */
+ /* Called by gigaset_stop() or gigaset_bchannel_down() for resetting
+ bcs->hw.xxx */
void (*reinitbcshw)(struct bc_state *bcs);
/* Called by gigaset_initcs() for setting up cs->hw.xxx */
/* Called by gigaset_freecs() for freeing cs->hw.xxx */
void (*freecshw)(struct cardstate *cs);
- ///* Called by gigaset_stop() for killing URBs, shutting down the device, ...
- // hardwareup: ==0: don't try to shut down the device, hardware is really not accessible
- // !=0: hardware still up */
- //void (*stophw)(struct cardstate *cs, int hardwareup);
-
- /* Called from common.c/interface.c for additional serial port control */
- int (*set_modem_ctrl)(struct cardstate *cs, unsigned old_state, unsigned new_state);
+ /* Called from common.c/interface.c for additional serial port
+ control */
+ int (*set_modem_ctrl)(struct cardstate *cs, unsigned old_state,
+ unsigned new_state);
int (*baud_rate)(struct cardstate *cs, unsigned cflag);
int (*set_line_ctrl)(struct cardstate *cs, unsigned cflag);
/* Called from bas-gigaset.c to process a block of data
* received through the isochronous channel */
-void gigaset_isoc_receive(unsigned char *src, unsigned count, struct bc_state *bcs);
+void gigaset_isoc_receive(unsigned char *src, unsigned count,
+ struct bc_state *bcs);
/* Called from bas-gigaset.c to put a block of data
* into the isochronous output buffer */
void gigaset_unassign(struct cardstate *cs);
void gigaset_blockdriver(struct gigaset_driver *drv);
-/* Allocate and initialize card state. Calls hardware dependent gigaset_init[b]cs(). */
+/* Allocate and initialize card state. Calls hardware dependent
+ gigaset_init[b]cs(). */
struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
int onechannel, int ignoreframes,
int cidmode, const char *modulename);
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
* =====================================================================
- * ToDo: ...
- * =====================================================================
- * Version: $Id: i4l.c,v 1.3.2.9 2006/02/04 18:28:16 hjlipp Exp $
- * =====================================================================
*/
#include "gigaset.h"
* parameters:
* driverID driver ID as assigned by LL
* channel channel number
- * ack if != 0 LL wants to be notified on completion via statcallb(ISDN_STAT_BSENT)
+ * ack if != 0 LL wants to be notified on completion via
+ * statcallb(ISDN_STAT_BSENT)
* skb skb containing data to send
* return value:
* number of accepted bytes
//dbg(DEBUG_ANY, "Gigaset_HW: Receiving command");
gigaset_debugdrivers();
- /* Terminate this call if no device is present. Bt if the command is "ISDN_CMD_LOCK" or
- * "ISDN_CMD_UNLOCK" then execute it due to the fact that they are device independent !
- */
//FIXME "remove test for &connected"
if ((!cs || !atomic_read(&cs->connected))) {
warn("LL tried to access unknown device with nr. %d",
gigaset_schedule_event(cs);
break;
- case ISDN_CMD_CLREAZ: /* Do not signal incoming signals */ //FIXME
+ case ISDN_CMD_CLREAZ: /* Do not signal incoming signals */ //FIXME
dbg(DEBUG_ANY, "ISDN_CMD_CLREAZ");
break;
- case ISDN_CMD_SETEAZ: /* Signal incoming calls for given MSN */ //FIXME
+ case ISDN_CMD_SETEAZ: /* Signal incoming calls for given MSN */ //FIXME
dbg(DEBUG_ANY,
"ISDN_CMD_SETEAZ (id:%d, channel: %ld, number: %s)",
cntrl->driver, cntrl->arg, cntrl->parm.num);
break;
- case ISDN_CMD_SETL2: /* Set L2 to given protocol */
+ case ISDN_CMD_SETL2: /* Set L2 to given protocol */
dbg(DEBUG_ANY, "ISDN_CMD_SETL2 (Channel: %ld, Proto: %lx)",
cntrl->arg & 0xff, (cntrl->arg >> 8));
dbg(DEBUG_CMD, "scheduling PROTO_L2");
gigaset_schedule_event(cs);
break;
- case ISDN_CMD_SETL3: /* Set L3 to given protocol */
+ case ISDN_CMD_SETL3: /* Set L3 to given protocol */
dbg(DEBUG_ANY, "ISDN_CMD_SETL3 (Channel: %ld, Proto: %lx)",
cntrl->arg & 0xff, (cntrl->arg >> 8));
}
if (bcs->commands[AT_MSN])
- snprintf(bcs->commands[AT_MSN], length[AT_MSN], "^SMSN=%s\r", sp->eazmsn);
- snprintf(bcs->commands[AT_BC ], length[AT_BC ], "^SBC=%s\r", bc);
- snprintf(bcs->commands[AT_PROTO], length[AT_PROTO], "^SBPR=%u\r", proto);
- snprintf(bcs->commands[AT_ISO ], length[AT_ISO ], "^SISO=%u\r", (unsigned)bcs->channel + 1);
+ snprintf(bcs->commands[AT_MSN], length[AT_MSN],
+ "^SMSN=%s\r", sp->eazmsn);
+ snprintf(bcs->commands[AT_BC ], length[AT_BC ],
+ "^SBC=%s\r", bc);
+ snprintf(bcs->commands[AT_PROTO], length[AT_PROTO],
+ "^SBPR=%u\r", proto);
+ snprintf(bcs->commands[AT_ISO ], length[AT_ISO ],
+ "^SISO=%u\r", (unsigned)bcs->channel + 1);
return 0;
}
}
}
- snprintf(bcs->commands[AT_PROTO], length[AT_PROTO], "^SBPR=%u\r", proto);
- snprintf(bcs->commands[AT_ISO ], length[AT_ISO ], "^SISO=%u\r", (unsigned) bcs->channel + 1);
+ snprintf(bcs->commands[AT_PROTO], length[AT_PROTO],
+ "^SBPR=%u\r", proto);
+ snprintf(bcs->commands[AT_ISO ], length[AT_ISO ],
+ "^SISO=%u\r", (unsigned) bcs->channel + 1);
return 0;
}
return -ENOMEM; //FIXME EINVAL/...??
iif->owner = THIS_MODULE;
- iif->channels = cs->channels; /* I am supporting just one channel *//* I was supporting...*/
+ iif->channels = cs->channels;
iif->maxbufsize = MAX_BUF_SIZE;
- iif->features = ISDN_FEATURE_L2_TRANS | /* Our device is very advanced, therefore */
+ iif->features = ISDN_FEATURE_L2_TRANS |
ISDN_FEATURE_L2_HDLC |
#ifdef GIG_X75
ISDN_FEATURE_L2_X75I |
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
* =====================================================================
- * Version: $Id: interface.c,v 1.14.4.15 2006/02/04 18:28:16 hjlipp Exp $
- * =====================================================================
*/
#include "gigaset.h"
cs->tty = tty;
spin_unlock_irqrestore(&cs->lock, flags);
tty->low_latency = 1; //FIXME test
- //FIXME
}
up(&cs->sem);
spin_lock_irqsave(&cs->lock, flags);
cs->tty = NULL;
spin_unlock_irqrestore(&cs->lock, flags);
- //FIXME
}
}
gigaset_dbg_buffer(DEBUG_IF, "GIGASET_BRKCHARS",
6, (const unsigned char *) arg, 1);
if (!atomic_read(&cs->connected)) {
- dbg(DEBUG_ANY, "can't communicate with unplugged device");
+ dbg(DEBUG_ANY,
+ "can't communicate with unplugged device");
retval = -ENODEV;
break;
}
retval = copy_from_user(&buf,
- (const unsigned char __user *) arg, 6)
+ (const unsigned char __user *) arg, 6)
? -EFAULT : 0;
if (retval >= 0)
retval = cs->ops->brkchars(cs, buf);
break;
case GIGASET_VERSION:
- retval = copy_from_user(version, (unsigned __user *) arg,
+ retval = copy_from_user(version,
+ (unsigned __user *) arg,
sizeof version) ? -EFAULT : 0;
if (retval >= 0)
retval = if_version(cs, version);
if (retval >= 0)
- retval = copy_to_user((unsigned __user *) arg, version,
- sizeof version)
+ retval = copy_to_user((unsigned __user *) arg,
+ version, sizeof version)
? -EFAULT : 0;
break;
default:
new_state &= ~(TIOCM_DTR | TIOCM_RTS);
if (new_state != control_state) {
dbg(DEBUG_IF, "%u: new_state %x", cs->minor_index, new_state);
- gigaset_set_modem_ctrl(cs, control_state, new_state); // FIXME: mct_u232.c sets the old state here. is this a bug?
+ gigaset_set_modem_ctrl(cs, control_state, new_state);
control_state = new_state;
}
#endif
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
* =====================================================================
- * ToDo: ...
- * =====================================================================
- * Version: $Id: isocdata.c,v 1.2.2.5 2005/11/13 23:05:19 hjlipp Exp $
- * =====================================================================
*/
#include "gigaset.h"
return -EBUSY;
/* write position could have changed */
if (limit >= (write = atomic_read(&iwb->write))) {
- pbyte = iwb->data[write]; /* save partial byte */
+ pbyte = iwb->data[write]; /* save
+ partial byte */
limit = write + BAS_OUTBUFPAD;
dbg(DEBUG_STREAM,
"%s: filling %d->%d with %02x",
}
dbg(DEBUG_STREAM, "%s: restoring %02x at %d",
__func__, pbyte, limit);
- iwb->data[limit] = pbyte; /* restore partial byte */
+ iwb->data[limit] = pbyte; /* restore
+ partial byte */
atomic_set(&iwb->write, limit);
}
isowbuf_donewrite(iwb);
switch (bcs->proto2) {
case ISDN_PROTO_L2_HDLC:
result = hdlc_buildframe(bcs->hw.bas->isooutbuf, in, len);
- dbg(DEBUG_ISO, "%s: %d bytes HDLC -> %d", __func__, len, result);
+ dbg(DEBUG_ISO, "%s: %d bytes HDLC -> %d",
+ __func__, len, result);
break;
default: /* assume transparent */
result = trans_buildframe(bcs->hw.bas->isooutbuf, in, len);
- dbg(DEBUG_ISO, "%s: %d bytes trans -> %d", __func__, len, result);
+ dbg(DEBUG_ISO, "%s: %d bytes trans -> %d",
+ __func__, len, result);
}
return result;
}
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
* =====================================================================
- * ToDo: ...
- * =====================================================================
- * Version: $Id: proc.c,v 1.5.2.13 2006/02/04 18:28:16 hjlipp Exp $
- * =====================================================================
*/
#include "gigaset.h"
#include <linux/ctype.h>
-static ssize_t show_cidmode(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_cidmode(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct usb_interface *intf = to_usb_interface(dev);
struct cardstate *cs = usb_get_intfdata(intf);
- return sprintf(buf, "%d\n", atomic_read(&cs->cidmode)); // FIXME use scnprintf for 13607 bit architectures (if PAGE_SIZE==4096)
+ return sprintf(buf, "%d\n", atomic_read(&cs->cidmode));
}
-static ssize_t set_cidmode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t set_cidmode(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct usb_interface *intf = to_usb_interface(dev);
struct cardstate *cs = usb_get_intfdata(intf);
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
* =====================================================================
- * ToDo: ...
- * =====================================================================
- * Version: $Id: usb-gigaset.c,v 1.85.4.18 2006/02/04 18:28:16 hjlipp Exp $
- * =====================================================================
*/
#include "gigaset.h"
MODULE_DEVICE_TABLE(usb, gigaset_table);
-/* Get a minor range for your devices from the usb maintainer */
-#define USB_SKEL_MINOR_BASE 200
-
-
/*
* Control requests (empty fields: 00)
*
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver gigaset_usb_driver = {
- .name = GIGASET_MODULENAME,
- .probe = gigaset_probe,
- .disconnect = gigaset_disconnect,
- .id_table = gigaset_table,
+ .name = GIGASET_MODULENAME,
+ .probe = gigaset_probe,
+ .disconnect = gigaset_disconnect,
+ .id_table = gigaset_table,
};
struct usb_cardstate {
- struct usb_device *udev; /* save off the usb device pointer */
- struct usb_interface *interface; /* the interface for this device */
- atomic_t busy; /* bulk output in progress */
-
- /* Output buffer for commands (M105: and data)*/
- unsigned char *bulk_out_buffer; /* the buffer to send data */
- int bulk_out_size; /* the size of the send buffer */
- __u8 bulk_out_endpointAddr; /* the address of the bulk out endpoint */
- struct urb *bulk_out_urb; /* the urb used to transmit data */
-
- /* Input buffer for command responses (M105: and data)*/
- int rcvbuf_size; /* the size of the receive buffer */
- struct urb *read_urb; /* the urb used to receive data */
- __u8 int_in_endpointAddr; /* the address of the bulk in endpoint */
-
- char bchars[6]; /* req. 0x19 */
+ struct usb_device *udev; /* usb device pointer */
+ struct usb_interface *interface; /* interface for this device */
+ atomic_t busy; /* bulk output in progress */
+
+ /* Output buffer */
+ unsigned char *bulk_out_buffer; /* send buffer */
+ int bulk_out_size; /* send buffer size */
+ __u8 bulk_out_endpointAddr; /* bulk out endpoint */
+ struct urb *bulk_out_urb; /* bulk out urb */
+
+ /* Input buffer */
+ int rcvbuf_size; /* rcv buffer */
+ struct urb *read_urb; /* rcv buffer size */
+ __u8 int_in_endpointAddr; /* int in endpoint */
+
+ char bchars[6]; /* request 0x19 */
};
struct usb_bc_state {};
val = tiocm_to_gigaset(new_state);
dbg(DEBUG_USBREQ, "set flags 0x%02x with mask 0x%02x", val, mask);
+ // don't use this in an interrupt/BH
r = usb_control_msg(cs->hw.usb->udev,
usb_sndctrlpipe(cs->hw.usb->udev, 0), 7, 0x41,
(val & 0xff) | ((mask & 0xff) << 8), 0,
- NULL, 0, 2000 /*timeout??*/); // don't use this in an interrupt/BH
+ NULL, 0, 2000 /* timeout? */);
if (r < 0)
return r;
//..
return 0;
}
-//void send_ack_to_LL(void *data);
static int write_modem(struct cardstate *cs);
static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb);
-/* Handling of send queue. If there is already a skb opened, put data to
- * the transfer buffer by calling "write_modem". Otherwise take a new skb out of the queue.
- * This function will be called by the ISR via "transmit_chars" (USB: B-Channel Bulk callback handler
- * via immediate task queue) or by writebuf_from_LL if the LL wants to transmit data.
+/* Write tasklet handler: Continue sending current skb, or send command, or
+ * start sending an skb from the send queue.
*/
static void gigaset_modem_fill(unsigned long data)
{
if (send_cb(cs, cb) < 0) {
dbg(DEBUG_OUTPUT,
"modem_fill: send_cb failed");
- again = 1; /* no callback will be called! */
+ again = 1; /* no callback will be
+ called! */
}
} else { /* skbs to send? */
bcs->tx_skb = skb_dequeue(&bcs->squeue);
/**
* gigaset_read_int_callback
*
- * It is called if the data was received from the device. This is almost similiar to
- * the interrupt service routine in the serial device.
+ * It is called if the data was received from the device.
*/
static void gigaset_read_int_callback(struct urb *urb, struct pt_regs *regs)
{
struct cardstate *cs;
unsigned numbytes;
unsigned char *src;
- //unsigned long flags;
struct inbuf_t *inbuf;
IFNULLRET(urb);
inbuf = (struct inbuf_t *) urb->context;
IFNULLRET(inbuf);
- //spin_lock_irqsave(&inbuf->lock, flags);
cs = inbuf->cs;
IFNULLGOTO(cs, exit);
IFNULLGOTO(cardstate, exit);
resubmit = 1;
}
exit:
- //spin_unlock_irqrestore(&inbuf->lock, flags);
if (resubmit) {
r = usb_submit_urb(urb, SLAB_ATOMIC);
if (r)
}
-/* This callback routine is called when data was transmitted to a B-Channel.
- * Therefore it has to check if there is still data to transmit. This
- * happens by calling modem_fill via task queue.
- *
- */
+/* This callback routine is called when data was transmitted to the device. */
static void gigaset_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
{
struct cardstate *cs = (struct cardstate *) urb->context;
}
#endif
if (urb->status)
- err("bulk transfer failed (status %d)", -urb->status); /* That's all we can do. Communication problems
- are handeled by timeouts or network protocols */
+ err("bulk transfer failed (status %d)", -urb->status);
+ /* That's all we can do. Communication problems
+ are handeled by timeouts or network protocols */
atomic_set(&cs->hw.usb->busy, 0);
tasklet_schedule(&cs->write_tasklet);
atomic_set(&ucs->busy, 0);
err("could not submit urb (error %d).",
-status);
- cb->len = 0; /* skip urb => remove cb+wakeup in next loop cycle */
+ cb->len = 0; /* skip urb => remove cb+wakeup
+ in next loop cycle */
}
}
- } while (cb && status); /* bei Fehler naechster Befehl //FIXME: ist das OK? */
+ } while (cb && status); /* next command on error */
return status;
}
-/* Write string into transbuf and send it to modem.
- */
+/* Send command to device. */
static int gigaset_write_cmd(struct cardstate *cs, const unsigned char *buf,
int len, struct tasklet_struct *wake_tasklet)
{
if (!bcs->hw.usb)
return 0;
- //bcs->hw.usb->trans_flg = READY_TO_TRNSMIT; /* B-Channel ready to transmit */
return 1;
}
static void gigaset_freecshw(struct cardstate *cs)
{
- //FIXME
tasklet_kill(&cs->write_tasklet);
kfree(cs->hw.usb);
}
return 1;
}
-/* Writes the data of the current open skb into the modem.
- * We have to protect against multiple calls until the
- * callback handler () is called , due to the fact that we
- * are just allowed to send data once to an endpoint. Therefore
- * we using "trans_flg" to synchonize ...
- */
+/* Send data from current skb to the device. */
static int write_modem(struct cardstate *cs)
{
int ret;
int count;
struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
struct usb_cardstate *ucs = cs->hw.usb;
- //unsigned long flags;
IFNULLRETVAL(bcs->tx_skb, -EINVAL);
struct usb_host_interface *hostif;
struct cardstate *cs = NULL;
struct usb_cardstate *ucs = NULL;
- //struct usb_interface_descriptor *iface_desc;
struct usb_endpoint_descriptor *endpoint;
- //isdn_ctrl command;
int buffer_size;
int alt;
- //unsigned long flags;
info("%s: Check if device matches .. (Vendor: 0x%x, Product: 0x%x)",
__func__, le16_to_cpu(udev->descriptor.idVendor),
}
ucs = cs->hw.usb;
-#if 0
- if (usb_set_configuration(udev, udev->config[0].desc.bConfigurationValue) < 0) {
- warn("set_configuration failed");
- goto error;
- }
-
-
- if (usb_set_interface(udev, ifnum/*==0*/, alt/*==0*/) < 0) {
- warn("usb_set_interface failed, device %d interface %d altsetting %d",
- udev->devnum, ifnum, alt);
- goto error;
- }
-#endif
-
- /* set up the endpoint information */
- /* check out the endpoints */
- /* We will get 2 endpoints: One for sending commands to the device (bulk out) and one to
- * poll messages from the device(int in).
- * Therefore we will have an almost similiar situation as with our serial port handler.
- * If an connection will be established, we will have to create data in/out pipes
- * dynamically...
- */
-
endpoint = &hostif->endpoint[0].desc;
buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
tasklet_kill(&cs->write_tasklet);
- usb_kill_urb(ucs->bulk_out_urb); /* FIXME: nur, wenn noetig */
- //usb_kill_urb(ucs->urb_cmd_out); /* FIXME: nur, wenn noetig */
+ usb_kill_urb(ucs->bulk_out_urb); /* FIXME: only if active? */
kfree(ucs->bulk_out_buffer);
if (ucs->bulk_out_urb != NULL)
usb_free_urb(ucs->bulk_out_urb);
- //if(ucs->urb_cmd_out != NULL)
- // usb_free_urb(ucs->urb_cmd_out);
kfree(cs->inbuf[0].rcvbuf);
if (ucs->read_urb != NULL)
usb_free_urb(ucs->read_urb);
- ucs->read_urb = ucs->bulk_out_urb/*=ucs->urb_cmd_out*/=NULL;
+ ucs->read_urb = ucs->bulk_out_urb = NULL;
cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL;
gigaset_unassign(cs);
projects / linux-2.6 / commitdiff