help
This enables support for ARM Ltd Versatile board.
-config ARCH_AT91RM9200
- bool "Atmel AT91RM9200"
+config ARCH_AT91
+ bool "Atmel AT91"
help
- Say Y here if you intend to run this kernel on an Atmel
- AT91RM9200-based board.
+ This enables support for systems based on the Atmel AT91RM9200
+ and AT91SAM9xxx processors.
config ARCH_CLPS7500
bool "Cirrus CL-PS7500FE"
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
- machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
+ machine-$(CONFIG_ARCH_AT91) := at91rm9200
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_NETX) := netx
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-if ARCH_AT91RM9200
+if ARCH_AT91
+
+menu "Atmel AT91 System-on-Chip"
+
+comment "Atmel AT91 Processors"
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
-menu "AT91RM9200 Implementations"
+config ARCH_AT91SAM9260
+ bool "AT91SAM9260"
+
+config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
comment "AT91RM9200 Board Type"
bool "Ajeco 1ARM Single Board Computer"
depends on ARCH_AT91RM9200
help
- Select this if you are using Ajeco's 1ARM Single Board Computer
+ Select this if you are using Ajeco's 1ARM Single Board Computer.
+ <http://www.ajeco.fi/products.htm>
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
depends on ARCH_AT91RM9200
help
- Select this if you are using Atmel's AT91RM9200-DK Development board
+ Select this if you are using Atmel's AT91RM9200-DK Development board.
+ (Discontinued)
+
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
depends on ARCH_AT91RM9200
help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit
+ Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
config MACH_CSB337
- bool "Cogent CSB337 board"
+ bool "Cogent CSB337"
depends on ARCH_AT91RM9200
help
- Select this if you are using Cogent's CSB337 board
+ Select this if you are using Cogent's CSB337 board.
+ <http://www.cogcomp.com/csb_csb337.htm>
config MACH_CSB637
- bool "Cogent CSB637 board"
+ bool "Cogent CSB637"
depends on ARCH_AT91RM9200
help
- Select this if you are using Cogent's CSB637 board
+ Select this if you are using Cogent's CSB637 board.
+ <http://www.cogcomp.com/csb_csb637.htm>
config MACH_CARMEVA
- bool "Conitec's ARM&EVA"
+ bool "Conitec ARM&EVA"
depends on ARCH_AT91RM9200
help
- Select this if you are using Conitec's AT91RM9200-MCU-Module
+ Select this if you are using Conitec's AT91RM9200-MCU-Module.
+ <http://www.conitec.net/english/linuxboard.htm>
-config MACH_KB9200
- bool "KwikByte's KB920x"
+config MACH_ATEB9200
+ bool "Embest ATEB9200"
depends on ARCH_AT91RM9200
help
- Select this if you are using KwikByte's KB920x board
+ Select this if you are using Embest's ATEB9200 board.
+ <http://www.embedinfo.com/english/product/ATEB9200.asp>
-config MACH_ATEB9200
- bool "Embest's ATEB9200"
+config MACH_KB9200
+ bool "KwikByte KB920x"
depends on ARCH_AT91RM9200
help
- Select this if you are using Embest's ATEB9200 board
+ Select this if you are using KwikByte's KB920x board.
+ <http://kwikbyte.com/KB9202_description_new.htm>
config MACH_KAFA
bool "Sperry-Sun KAFA board"
depends on ARCH_AT91RM9200
help
- Select this if you are using Sperry-Sun's KAFA board
+ Select this if you are using Sperry-Sun's KAFA board.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Board Type"
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+endif
+
+# ----------------------------------------------------------
-comment "AT91RM9200 Feature Selections"
+comment "AT91 Feature Selections"
config AT91_PROGRAMMABLE_CLOCKS
bool "Programmable Clocks"
# Makefile for the linux kernel.
#
-obj-y := clock.o irq.o time.o gpio.o common.o devices.o
+obj-y := clock.o irq.o gpio.o devices.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_PM) += pm.o
-# Board-specific support
+# CPU-specific support
+obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_ARCH_AT91SAM9260) +=
+obj-$(CONFIG_ARCH_AT91SAM9261) +=
+
+# AT91RM9200 Board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
+# AT91SAM9260 board-specific support
+
+# AT91SAM9261 board-specific support
+
# LEDs support
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
/*
- * arch/arm/mach-at91rm9200/common.c
+ * arch/arm/mach-at91rm9200/at91rm9200.c
*
* Copyright (C) 2005 SAN People
*
/*
- * linux/arch/arm/mach-at91rm9200/time.c
+ * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT