V4L/DVB (5960): Add module parameter to enable SFN workaround

In some areas in the world the broadcasters are not using the same
cellid for each transmitter in a SFN. The DiBcom has problems with
that setup. The module parameter buggy_sfn_workaround makes it re-usable.

Signed-off-by: Matt Doran <matt.doran@papercut.biz>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c
index 38d2322cbaf690bbf832ce5403329be6acfbcbf6..f0096de2279e3b229e2a7097589de1dcba2f776a 100644 (file)
--- a/drivers/media/dvb/frontends/dib3000mc.c
+++ b/drivers/media/dvb/frontends/dib3000mc.c
@@ -13,10 +13,6 @@
 
 #include <linux/kernel.h>
 #include <linux/i2c.h>
-//#include <linux/init.h>
-//#include <linux/delay.h>
-//#include <linux/string.h>
-//#include <linux/slab.h>
 
 #include "dvb_frontend.h"
 
@@ -26,6 +22,10 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
 
+static int buggy_sfn_workaround;
+module_param(buggy_sfn_workaround, int, 0644);
+MODULE_PARM_DESC(debug, "Enable work-around for buggy SFNs (default: 0)");
+
 #define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB3000MC/P:"); printk(args); printk("\n"); } } while (0)
 
 struct dib3000mc_state {
@@ -42,6 +42,8 @@ struct dib3000mc_state {
        fe_bandwidth_t current_bandwidth;
 
        u16 dev_id;
+
+       u8 sfn_workaround_active :1;
 };
 
 static u16 dib3000mc_read_word(struct dib3000mc_state *state, u16 reg)
@@ -591,7 +593,14 @@ static int dib3000mc_tune(struct dvb_frontend *demod, struct dvb_frontend_parame
        dib3000mc_set_channel_cfg(state, ch, 0);
 
        // activates isi
-       dib3000mc_write_word(state, 29, 0x1073);
+       if (state->sfn_workaround_active) {
+               dprintk("SFN workaround is active\n");
+               dib3000mc_write_word(state, 29, 0x1273);
+               dib3000mc_write_word(state, 108, 0x4000); // P_pha3_force_pha_shift
+       } else {
+               dib3000mc_write_word(state, 29, 0x1073);
+               dib3000mc_write_word(state, 108, 0x0000); // P_pha3_force_pha_shift
+       }
 
        dib3000mc_set_adp_cfg(state, (u8)ch->u.ofdm.constellation);
        if (ch->u.ofdm.transmission_mode == TRANSMISSION_MODE_8K) {
@@ -679,6 +688,9 @@ static int dib3000mc_set_frontend(struct dvb_frontend* fe,
        state->current_bandwidth = fep->u.ofdm.bandwidth;
        dib3000mc_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->u.ofdm.bandwidth));
 
+       /* maybe the parameter has been changed */
+       state->sfn_workaround_active = buggy_sfn_workaround;
+
        if (fe->ops.tuner_ops.set_params) {
                fe->ops.tuner_ops.set_params(fe, fep);
                msleep(100);

diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 1175ab9a45325202aa8ad0c16e1f14b30ca2c5ae..aa7dc45033235e661a04c1e53d55a2abecae8894 100644 (file)
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -18,6 +18,10 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
 
+static int buggy_sfn_workaround;
+module_param(buggy_sfn_workaround, int, 0644);
+MODULE_PARM_DESC(debug, "Enable work-around for buggy SFNs (default: 0)");
+
 #define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000P: "); printk(args); printk("\n"); } } while (0)
 
 struct dib7000p_state {
@@ -44,6 +48,8 @@ struct dib7000p_state {
 
        u16 gpio_dir;
        u16 gpio_val;
+
+       u8 sfn_workaround_active :1;
 };
 
 enum dib7000p_power_mode {
@@ -751,8 +757,8 @@ static void dib7000p_set_channel(struct dib7000p_state *state, struct dvb_fronte
 
        /* offset loop parameters */
        dib7000p_write_word(state, 26, 0x6680); // timf(6xxx)
-       dib7000p_write_word(state, 29, 0x1273); // isi inh1273 on1073
        dib7000p_write_word(state, 32, 0x0003); // pha_off_max(xxx3)
+       dib7000p_write_word(state, 29, 0x1273); // isi
        dib7000p_write_word(state, 33, 0x0005); // sfreq(xxx5)
 
        /* P_dvsy_sync_wait */
@@ -959,7 +965,15 @@ static int dib7000p_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
        msleep(45);
 
        /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
-       dib7000p_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
+       tmp = (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3);
+       if (state->sfn_workaround_active) {
+               dprintk( "SFN workaround is active");
+               tmp |= (1 << 9);
+               dib7000p_write_word(state, 166, 0x4000); // P_pha3_force_pha_shift
+       } else {
+               dib7000p_write_word(state, 166, 0x0000); // P_pha3_force_pha_shift
+       }
+       dib7000p_write_word(state, 29, tmp);
 
        // never achieved a lock with that bandwidth so far - wait for osc-freq to update
        if (state->timf == 0)
@@ -1119,6 +1133,9 @@ static int dib7000p_set_frontend(struct dvb_frontend* fe,
        state->current_bandwidth = fep->u.ofdm.bandwidth;
        dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->u.ofdm.bandwidth));
 
+       /* maybe the parameter has been changed */
+       state->sfn_workaround_active = buggy_sfn_workaround;
+
        if (fe->ops.tuner_ops.set_params)
                fe->ops.tuner_ops.set_params(fe, fep);