hwmon/smsc47m1: Add support for the LPC47M292

The new SMSC LPC47M292 Super-I/O chip is a bit different from the
previous ones, it supports a 3rd fan, but unfortunately the pin
configuration registers are different.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1
index 04a11124f667756b9a4225b81624d9d9225eb1ae..42c8431b3c9dc37bf612a308cb5d0b56bb89fb3e 100644 (file)
--- a/Documentation/hwmon/smsc47m1
+++ b/Documentation/hwmon/smsc47m1
@@ -14,6 +14,10 @@ Supported chips:
         http://www.smsc.com/main/datasheets/47m14x.pdf
         http://www.smsc.com/main/tools/discontinued/47m15x.pdf
         http://www.smsc.com/main/datasheets/47m192.pdf
+  * SMSC LPC47M292
+    Addresses scanned: none, address read from Super I/O config space
+    Prefix: 'smsc47m2'
+    Datasheet: Not public
   * SMSC LPC47M997
     Addresses scanned: none, address read from Super I/O config space
     Prefix: 'smsc47m1'
@@ -32,9 +36,10 @@ Description
 The Standard Microsystems Corporation (SMSC) 47M1xx Super I/O chips
 contain monitoring and PWM control circuitry for two fans.
 
-The 47M15x and 47M192 chips contain a full 'hardware monitoring block'
-in addition to the fan monitoring and control. The hardware monitoring
-block is not supported by the driver.
+The LPC47M15x, LPC47M192 and LPC47M292 chips contain a full 'hardware
+monitoring block' in addition to the fan monitoring and control. The
+hardware monitoring block is not supported by this driver, use the
+smsc47m192 driver for that.
 
 No documentation is available for the 47M997, but it has the same device
 ID as the 47M15x and 47M192 chips and seems to be compatible.

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 68ee9702e33967ea52404ff9b4604ae3b82b6b17..399b6a92e9b01a177dbf934ee8a7f7c3a6867dd3 100644 (file)
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -422,11 +422,12 @@ config SENSORS_SMSC47M1
          If you say yes here you get support for the integrated fan
          monitoring and control capabilities of the SMSC LPC47B27x,
          LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
-         LPC47M192 and LPC47M997 chips.
+         LPC47M192, LPC47M292 and LPC47M997 chips.
 
-         The temperature and voltage sensor features of the LPC47M192
-         and LPC47M997 are supported by another driver, select also
-         "SMSC LPC47M192 and compatibles" below for those.
+         The temperature and voltage sensor features of the LPC47M15x,
+         LPC47M192, LPC47M292 and LPC47M997 are supported by another
+         driver, select also "SMSC LPC47M192 and compatibles" below for
+         those.
 
          This driver can also be built as a module.  If so, the module
          will be called smsc47m1.

diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index beb881c4b2e8ce1f2c191f6ce2343655a0e57200..16762cca87e54a04e42a88424a415ba86d08bda6 100644 (file)
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -3,10 +3,11 @@
                  for hardware monitoring
 
     Supports the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x,
-    LPC47M14x, LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips.
+    LPC47M14x, LPC47M15x, LPC47M192, LPC47M292 and LPC47M997
+    Super-I/O chips.
 
     Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
-    Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+    Copyright (C) 2004-2007 Jean Delvare <khali@linux-fr.org>
     Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com>
                         and Jean Delvare
 
@@ -40,6 +41,8 @@
 
 /* Address is autodetected, there is no default value */
 static unsigned short address;
+static u8 devid;
+enum chips { smsc47m1, smsc47m2 };
 
 /* Super-I/0 registers and commands */
 
@@ -87,10 +90,18 @@ superio_exit(void)
 #define SMSC47M1_REG_ALARM             0x04
 #define SMSC47M1_REG_TPIN(nr)          (0x34 - (nr))
 #define SMSC47M1_REG_PPIN(nr)          (0x36 - (nr))
-#define SMSC47M1_REG_PWM(nr)           (0x56 + (nr))
 #define SMSC47M1_REG_FANDIV            0x58
-#define SMSC47M1_REG_FAN(nr)           (0x59 + (nr))
-#define SMSC47M1_REG_FAN_PRELOAD(nr)   (0x5B + (nr))
+
+static const u8 SMSC47M1_REG_FAN[3]            = { 0x59, 0x5a, 0x6b };
+static const u8 SMSC47M1_REG_FAN_PRELOAD[3]    = { 0x5b, 0x5c, 0x6c };
+static const u8 SMSC47M1_REG_PWM[3]            = { 0x56, 0x57, 0x69 };
+
+#define SMSC47M2_REG_ALARM6            0x09
+#define SMSC47M2_REG_TPIN1             0x38
+#define SMSC47M2_REG_TPIN2             0x37
+#define SMSC47M2_REG_TPIN3             0x2d
+#define SMSC47M2_REG_PPIN3             0x2c
+#define SMSC47M2_REG_FANDIV3           0x6a
 
 #define MIN_FROM_REG(reg,div)          ((reg)>=192 ? 0 : \
                                         983040/((192-(reg))*(div)))
@@ -103,17 +114,18 @@ superio_exit(void)
 
 struct smsc47m1_data {
        struct i2c_client client;
+       enum chips type;
        struct class_device *class_dev;
        struct mutex lock;
 
        struct mutex update_lock;
        unsigned long last_updated;     /* In jiffies */
 
-       u8 fan[2];              /* Register value */
-       u8 fan_preload[2];      /* Register value */
-       u8 fan_div[2];          /* Register encoding, shifted right */
+       u8 fan[3];              /* Register value */
+       u8 fan_preload[3];      /* Register value */
+       u8 fan_div[3];          /* Register encoding, shifted right */
        u8 alarms;              /* Register encoding */
-       u8 pwm[2];              /* Register value (bit 7 is enable) */
+       u8 pwm[3];              /* Register value (bit 0 is disable) */
 };
 
 
@@ -200,7 +212,7 @@ static ssize_t set_fan_min(struct device *dev, const char *buf,
        }
 
        data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
-       smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
+       smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD[nr],
                             data->fan_preload[nr]);
        mutex_unlock(&data->update_lock);
 
@@ -234,15 +246,26 @@ static ssize_t set_fan_div(struct device *dev, const char *buf,
                return -EINVAL;
        }
 
-       tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV) & 0x0F;
-       tmp |= (data->fan_div[0] << 4) | (data->fan_div[1] << 6);
-       smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp);
+       switch (nr) {
+       case 0:
+       case 1:
+               tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV)
+                     & ~(0x03 << (4 + 2 * nr));
+               tmp |= data->fan_div[nr] << (4 + 2 * nr);
+               smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp);
+               break;
+       case 2:
+               tmp = smsc47m1_read_value(client, SMSC47M2_REG_FANDIV3) & 0xCF;
+               tmp |= data->fan_div[2] << 4;
+               smsc47m1_write_value(client, SMSC47M2_REG_FANDIV3, tmp);
+               break;
+       }
 
        /* Preserve fan min */
        tmp = 192 - (old_div * (192 - data->fan_preload[nr])
                     + new_div / 2) / new_div;
        data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
-       smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
+       smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD[nr],
                             data->fan_preload[nr]);
        mutex_unlock(&data->update_lock);
 
@@ -263,7 +286,7 @@ static ssize_t set_pwm(struct device *dev, const char *buf,
        mutex_lock(&data->update_lock);
        data->pwm[nr] &= 0x81; /* Preserve additional bits */
        data->pwm[nr] |= PWM_TO_REG(val);
-       smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
+       smsc47m1_write_value(client, SMSC47M1_REG_PWM[nr],
                             data->pwm[nr]);
        mutex_unlock(&data->update_lock);
 
@@ -284,7 +307,7 @@ static ssize_t set_pwm_en(struct device *dev, const char *buf,
        mutex_lock(&data->update_lock);
        data->pwm[nr] &= 0xFE; /* preserve the other bits */
        data->pwm[nr] |= !val;
-       smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
+       smsc47m1_write_value(client, SMSC47M1_REG_PWM[nr],
                             data->pwm[nr]);
        mutex_unlock(&data->update_lock);
 
@@ -345,6 +368,7 @@ static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,         \
 
 fan_present(1);
 fan_present(2);
+fan_present(3);
 
 static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
 
@@ -358,11 +382,16 @@ static struct attribute *smsc47m1_attributes[] = {
        &dev_attr_fan2_input.attr,
        &dev_attr_fan2_min.attr,
        &dev_attr_fan2_div.attr,
+       &dev_attr_fan3_input.attr,
+       &dev_attr_fan3_min.attr,
+       &dev_attr_fan3_div.attr,
 
        &dev_attr_pwm1.attr,
        &dev_attr_pwm1_enable.attr,
        &dev_attr_pwm2.attr,
        &dev_attr_pwm2_enable.attr,
+       &dev_attr_pwm3.attr,
+       &dev_attr_pwm3_enable.attr,
 
        &dev_attr_alarms.attr,
        NULL
@@ -377,7 +406,7 @@ static int __init smsc47m1_find(unsigned short *addr)
        u8 val;
 
        superio_enter();
-       val = superio_inb(SUPERIO_REG_DEVID);
+       devid = superio_inb(SUPERIO_REG_DEVID);
 
        /*
         * SMSC LPC47M10x/LPC47M112/LPC47M13x (device id 0x59), LPC47M14x
@@ -386,18 +415,29 @@ static int __init smsc47m1_find(unsigned short *addr)
         * can do much more besides (device id 0x60).
         * The LPC47M997 is undocumented, but seems to be compatible with
         * the LPC47M192, and has the same device id.
+        * The LPC47M292 (device id 0x6B) is somewhat compatible, but it
+        * supports a 3rd fan, and the pin configuration registers are
+        * unfortunately different.
         */
-       if (val == 0x51)
+       switch (devid) {
+       case 0x51:
                printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n");
-       else if (val == 0x59)
+               break;
+       case 0x59:
                printk(KERN_INFO "smsc47m1: Found SMSC "
                       "LPC47M10x/LPC47M112/LPC47M13x\n");
-       else if (val == 0x5F)
+               break;
+       case 0x5F:
                printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n");
-       else if (val == 0x60)
+               break;
+       case 0x60:
                printk(KERN_INFO "smsc47m1: Found SMSC "
                       "LPC47M15x/LPC47M192/LPC47M997\n");
-       else {
+               break;
+       case 0x6B:
+               printk(KERN_INFO "smsc47m1: Found SMSC LPC47M292\n");
+               break;
+       default:
                superio_exit();
                return -ENODEV;
        }
@@ -421,7 +461,7 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
        struct i2c_client *new_client;
        struct smsc47m1_data *data;
        int err = 0;
-       int fan1, fan2, pwm1, pwm2;
+       int fan1, fan2, fan3, pwm1, pwm2, pwm3;
 
        if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.driver.name)) {
                dev_err(&adapter->dev, "Region 0x%x already in use!\n", address);
@@ -433,6 +473,7 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
                goto error_release;
        }
 
+       data->type = devid == 0x6B ? smsc47m2 : smsc47m1;
        new_client = &data->client;
        i2c_set_clientdata(new_client, data);
        new_client->addr = address;
@@ -441,20 +482,35 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
        new_client->driver = &smsc47m1_driver;
        new_client->flags = 0;
 
-       strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE);
+       strlcpy(new_client->name,
+               data->type == smsc47m2 ? "smsc47m2" : "smsc47m1",
+               I2C_NAME_SIZE);
        mutex_init(&data->update_lock);
 
        /* If no function is properly configured, there's no point in
           actually registering the chip. */
-       fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0)) & 0x05)
-              == 0x05;
-       fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1)) & 0x05)
-              == 0x05;
        pwm1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(0)) & 0x05)
               == 0x04;
        pwm2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(1)) & 0x05)
               == 0x04;
-       if (!(fan1 || fan2 || pwm1 || pwm2)) {
+       if (data->type == smsc47m2) {
+               fan1 = (smsc47m1_read_value(new_client, SMSC47M2_REG_TPIN1)
+                       & 0x0d) == 0x09;
+               fan2 = (smsc47m1_read_value(new_client, SMSC47M2_REG_TPIN2)
+                       & 0x0d) == 0x09;
+               fan3 = (smsc47m1_read_value(new_client, SMSC47M2_REG_TPIN3)
+                       & 0x0d) == 0x0d;
+               pwm3 = (smsc47m1_read_value(new_client, SMSC47M2_REG_PPIN3)
+                       & 0x0d) == 0x08;
+       } else {
+               fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0))
+                       & 0x05) == 0x05;
+               fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1))
+                       & 0x05) == 0x05;
+               fan3 = 0;
+               pwm3 = 0;
+       }
+       if (!(fan1 || fan2 || fan3 || pwm1 || pwm2 || pwm3)) {
                dev_warn(&adapter->dev, "Device at 0x%x is not configured, "
                         "will not use\n", new_client->addr);
                err = -ENODEV;
@@ -497,6 +553,18 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
                dev_dbg(&new_client->dev, "Fan 2 not enabled by hardware, "
                        "skipping\n");
 
+       if (fan3) {
+               if ((err = device_create_file(&new_client->dev,
+                                             &dev_attr_fan3_input))
+                || (err = device_create_file(&new_client->dev,
+                                             &dev_attr_fan3_min))
+                || (err = device_create_file(&new_client->dev,
+                                             &dev_attr_fan3_div)))
+                       goto error_remove_files;
+       } else
+               dev_dbg(&new_client->dev, "Fan 3 not enabled by hardware, "
+                       "skipping\n");
+
        if (pwm1) {
                if ((err = device_create_file(&new_client->dev,
                                              &dev_attr_pwm1))
@@ -506,6 +574,7 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
        } else
                dev_dbg(&new_client->dev, "PWM 1 not enabled by hardware, "
                        "skipping\n");
+
        if (pwm2) {
                if ((err = device_create_file(&new_client->dev,
                                              &dev_attr_pwm2))
@@ -516,6 +585,16 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
                dev_dbg(&new_client->dev, "PWM 2 not enabled by hardware, "
                        "skipping\n");
 
+       if (pwm3) {
+               if ((err = device_create_file(&new_client->dev,
+                                             &dev_attr_pwm3))
+                || (err = device_create_file(&new_client->dev,
+                                             &dev_attr_pwm3_enable)))
+                       goto error_remove_files;
+       } else
+               dev_dbg(&new_client->dev, "PWM 3 not enabled by hardware, "
+                       "skipping\n");
+
        if ((err = device_create_file(&new_client->dev, &dev_attr_alarms)))
                goto error_remove_files;
 
@@ -580,15 +659,16 @@ static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
        mutex_lock(&data->update_lock);
 
        if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
-               int i;
+               int i, fan_nr;
+               fan_nr = data->type == smsc47m2 ? 3 : 2;
 
-               for (i = 0; i < 2; i++) {
+               for (i = 0; i < fan_nr; i++) {
                        data->fan[i] = smsc47m1_read_value(client,
-                                      SMSC47M1_REG_FAN(i));
+                                      SMSC47M1_REG_FAN[i]);
                        data->fan_preload[i] = smsc47m1_read_value(client,
-                                              SMSC47M1_REG_FAN_PRELOAD(i));
+                                              SMSC47M1_REG_FAN_PRELOAD[i]);
                        data->pwm[i] = smsc47m1_read_value(client,
-                                      SMSC47M1_REG_PWM(i));
+                                      SMSC47M1_REG_PWM[i]);
                }
 
                i = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV);
@@ -601,6 +681,18 @@ static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
                if (data->alarms)
                        smsc47m1_write_value(client, SMSC47M1_REG_ALARM, 0xC0);
 
+               if (fan_nr >= 3) {
+                       data->fan_div[2] = (smsc47m1_read_value(client,
+                                           SMSC47M2_REG_FANDIV3) >> 4) & 0x03;
+                       data->alarms |= (smsc47m1_read_value(client,
+                                        SMSC47M2_REG_ALARM6) & 0x40) >> 4;
+                       /* Clear alarm if needed */
+                       if (data->alarms & 0x04)
+                               smsc47m1_write_value(client,
+                                                    SMSC47M2_REG_ALARM6,
+                                                    0x40);
+               }
+
                data->last_updated = jiffies;
        }