[PATCH] usbcore: register root hub in usb_add_hcd

This patch makes usbcore automatically allocate and register the root hub
device for a new host controller when the controller is registered.  This
way the HCDs don't all have to include the same boilerplate code.  As a
pleasant side benefit, the register_root_hub routine can now be made
static and not EXPORTed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 1180c157b717904c1133822ff3cbc07ed39fd814..83e732a0d64a5bd318dd9034a3728519b6bc1b06 100644 (file)
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -832,30 +832,22 @@ static void usb_deregister_bus (struct usb_bus *bus)
 }
 
 /**
- * usb_hcd_register_root_hub - called by HCD to register its root hub 
+ * register_root_hub - called by usb_add_hcd() to register a root hub
  * @usb_dev: the usb root hub device to be registered.
  * @hcd: host controller for this root hub
  *
- * The USB host controller calls this function to register the root hub
- * properly with the USB subsystem.  It sets up the device properly in
- * the device tree and stores the root_hub pointer in the bus structure,
- * then calls usb_new_device() to register the usb device.  It also
- * assigns the root hub's USB address (always 1).
+ * This function registers the root hub with the USB subsystem.  It sets up
+ * the device properly in the device tree and stores the root_hub pointer
+ * in the bus structure, then calls usb_new_device() to register the usb
+ * device.  It also assigns the root hub's USB address (always 1).
  */
-int usb_hcd_register_root_hub (struct usb_device *usb_dev, struct usb_hcd *hcd)
+static int register_root_hub (struct usb_device *usb_dev,
+               struct usb_hcd *hcd)
 {
        struct device *parent_dev = hcd->self.controller;
        const int devnum = 1;
        int retval;
 
-       /* hcd->driver->start() reported can_wakeup, probably with
-        * assistance from board's boot firmware.
-        * NOTE:  normal devices won't enable wakeup by default.
-        */
-       if (hcd->can_wakeup)
-               dev_dbg (parent_dev, "supports USB remote wakeup\n");
-       hcd->remote_wakeup = hcd->can_wakeup;
-
        usb_dev->devnum = devnum;
        usb_dev->bus->devnum_next = devnum + 1;
        memset (&usb_dev->bus->devmap.devicemap, 0,
@@ -898,7 +890,6 @@ int usb_hcd_register_root_hub (struct usb_device *usb_dev, struct usb_hcd *hcd)
 
        return retval;
 }
-EXPORT_SYMBOL_GPL(usb_hcd_register_root_hub);
 
 void usb_enable_root_hub_irq (struct usb_bus *bus)
 {
@@ -1724,7 +1715,8 @@ EXPORT_SYMBOL (usb_put_hcd);
 int usb_add_hcd(struct usb_hcd *hcd,
                unsigned int irqnum, unsigned long irqflags)
 {
-       int     retval;
+       int retval;
+       struct usb_device *rhdev;
 
        dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
 
@@ -1740,7 +1732,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
        }
 
        if ((retval = usb_register_bus(&hcd->self)) < 0)
-               goto err1;
+               goto err_register_bus;
 
        if (hcd->driver->irq) {
                char    buf[8], *bufp = buf;
@@ -1757,7 +1749,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
                                hcd->irq_descr, hcd)) != 0) {
                        dev_err(hcd->self.controller,
                                        "request interrupt %s failed\n", bufp);
-                       goto err2;
+                       goto err_request_irq;
                }
                hcd->irq = irqnum;
                dev_info(hcd->self.controller, "irq %s, %s 0x%08llx\n", bufp,
@@ -1773,21 +1765,55 @@ int usb_add_hcd(struct usb_hcd *hcd,
                                        (unsigned long long)hcd->rsrc_start);
        }
 
+       /* Allocate the root hub before calling hcd->driver->start(),
+        * but don't register it until afterward so that the hardware
+        * is running.
+        */
+       if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
+               dev_err(hcd->self.controller, "unable to allocate root hub\n");
+               retval = -ENOMEM;
+               goto err_allocate_root_hub;
+       }
+       rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
+                       USB_SPEED_FULL;
+
+       /* Although in principle hcd->driver->start() might need to use rhdev,
+        * none of the current drivers do.
+        */
        if ((retval = hcd->driver->start(hcd)) < 0) {
                dev_err(hcd->self.controller, "startup error %d\n", retval);
-               goto err3;
+               goto err_hcd_driver_start;
        }
 
+       /* hcd->driver->start() reported can_wakeup, probably with
+        * assistance from board's boot firmware.
+        * NOTE:  normal devices won't enable wakeup by default.
+        */
+       if (hcd->can_wakeup)
+               dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
+       hcd->remote_wakeup = hcd->can_wakeup;
+
+       if ((retval = register_root_hub(rhdev, hcd)) != 0)
+               goto err_register_root_hub;
+
        if (hcd->uses_new_polling && hcd->poll_rh)
                usb_hcd_poll_rh_status(hcd);
        return retval;
 
- err3:
+ err_register_root_hub:
+       hcd->driver->stop(hcd);
+
+ err_hcd_driver_start:
+       usb_put_dev(rhdev);
+
+ err_allocate_root_hub:
        if (hcd->irq >= 0)
                free_irq(irqnum, hcd);
- err2:
+
+ err_request_irq:
        usb_deregister_bus(&hcd->self);
- err1:
+
+ err_register_bus:
        hcd_buffer_destroy(hcd);
        return retval;
 } 

diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 3837f68bb7b377062221fd9bfcd3381ce91da6da..8dc13cde2f73eea8d0801cbb6b6a9e3bcdb4f13d 100644 (file)
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -353,9 +353,6 @@ extern long usb_calc_bus_time (int speed, int is_input,
 
 extern struct usb_bus *usb_alloc_bus (struct usb_operations *);
 
-extern int usb_hcd_register_root_hub (struct usb_device *usb_dev,
-               struct usb_hcd *hcd);
-
 extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
 
 extern void usb_set_device_state(struct usb_device *udev,