/* Register "SH_IPI_INT" */
/* SHub Inter-Processor Interrupt Registers */
/* ==================================================================== */
-#define SH1_IPI_INT 0x0000000110000380
-#define SH2_IPI_INT 0x0000000010000380
+#define SH1_IPI_INT __IA64_UL_CONST(0x0000000110000380)
+#define SH2_IPI_INT __IA64_UL_CONST(0x0000000010000380)
/* SH_IPI_INT_TYPE */
/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
-#define SH_IPI_INT_TYPE_SHFT 0
-#define SH_IPI_INT_TYPE_MASK 0x0000000000000007
+#define SH_IPI_INT_TYPE_SHFT 0
+#define SH_IPI_INT_TYPE_MASK __IA64_UL_CONST(0x0000000000000007)
/* SH_IPI_INT_AGT */
/* Description: Agent, must be 0 for SHub */
-#define SH_IPI_INT_AGT_SHFT 3
-#define SH_IPI_INT_AGT_MASK 0x0000000000000008
+#define SH_IPI_INT_AGT_SHFT 3
+#define SH_IPI_INT_AGT_MASK __IA64_UL_CONST(0x0000000000000008)
/* SH_IPI_INT_PID */
/* Description: Processor ID, same setting as on targeted McKinley */
-#define SH_IPI_INT_PID_SHFT 4
-#define SH_IPI_INT_PID_MASK 0x00000000000ffff0
+#define SH_IPI_INT_PID_SHFT 4
+#define SH_IPI_INT_PID_MASK __IA64_UL_CONST(0x00000000000ffff0)
/* SH_IPI_INT_BASE */
/* Description: Optional interrupt vector area, 2MB aligned */
-#define SH_IPI_INT_BASE_SHFT 21
-#define SH_IPI_INT_BASE_MASK 0x0003ffffffe00000
+#define SH_IPI_INT_BASE_SHFT 21
+#define SH_IPI_INT_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000)
/* SH_IPI_INT_IDX */
/* Description: Targeted McKinley interrupt vector */
-#define SH_IPI_INT_IDX_SHFT 52
-#define SH_IPI_INT_IDX_MASK 0x0ff0000000000000
+#define SH_IPI_INT_IDX_SHFT 52
+#define SH_IPI_INT_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000)
/* SH_IPI_INT_SEND */
/* Description: Send Interrupt Message to PI, This generates a puls */
-#define SH_IPI_INT_SEND_SHFT 63
-#define SH_IPI_INT_SEND_MASK 0x8000000000000000
+#define SH_IPI_INT_SEND_SHFT 63
+#define SH_IPI_INT_SEND_MASK __IA64_UL_CONST(0x8000000000000000)
/* ==================================================================== */
/* Register "SH_EVENT_OCCURRED" */
/* SHub Interrupt Event Occurred */
/* ==================================================================== */
-#define SH1_EVENT_OCCURRED 0x0000000110010000
-#define SH1_EVENT_OCCURRED_ALIAS 0x0000000110010008
-#define SH2_EVENT_OCCURRED 0x0000000010010000
-#define SH2_EVENT_OCCURRED_ALIAS 0x0000000010010008
+#define SH1_EVENT_OCCURRED __IA64_UL_CONST(0x0000000110010000)
+#define SH1_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000110010008)
+#define SH2_EVENT_OCCURRED __IA64_UL_CONST(0x0000000010010000)
+#define SH2_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000010010008)
/* ==================================================================== */
/* Register "SH_PI_CAM_CONTROL" */
/* CRB CAM MMR Access Control */
/* ==================================================================== */
-#define SH1_PI_CAM_CONTROL 0x0000000120050300
+#define SH1_PI_CAM_CONTROL __IA64_UL_CONST(0x0000000120050300)
/* ==================================================================== */
/* Register "SH_SHUB_ID" */
/* SHub ID Number */
/* ==================================================================== */
-#define SH1_SHUB_ID 0x0000000110060580
-#define SH1_SHUB_ID_REVISION_SHFT 28
-#define SH1_SHUB_ID_REVISION_MASK 0x00000000f0000000
+#define SH1_SHUB_ID __IA64_UL_CONST(0x0000000110060580)
+#define SH1_SHUB_ID_REVISION_SHFT 28
+#define SH1_SHUB_ID_REVISION_MASK __IA64_UL_CONST(0x00000000f0000000)
/* ==================================================================== */
/* Register "SH_RTC" */
/* Real-time Clock */
/* ==================================================================== */
-#define SH1_RTC 0x00000001101c0000
-#define SH2_RTC 0x00000002101c0000
-#define SH_RTC_MASK 0x007fffffffffffff
+#define SH1_RTC __IA64_UL_CONST(0x00000001101c0000)
+#define SH2_RTC __IA64_UL_CONST(0x00000002101c0000)
+#define SH_RTC_MASK __IA64_UL_CONST(0x007fffffffffffff)
/* ==================================================================== */
/* Register "SH_PIO_WRITE_STATUS_0|1" */
/* PIO Write Status for CPU 0 & 1 */
/* ==================================================================== */
-#define SH1_PIO_WRITE_STATUS_0 0x0000000120070200
-#define SH1_PIO_WRITE_STATUS_1 0x0000000120070280
-#define SH2_PIO_WRITE_STATUS_0 0x0000000020070200
-#define SH2_PIO_WRITE_STATUS_1 0x0000000020070280
-#define SH2_PIO_WRITE_STATUS_2 0x0000000020070300
-#define SH2_PIO_WRITE_STATUS_3 0x0000000020070380
+#define SH1_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000120070200)
+#define SH1_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000120070280)
+#define SH2_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000020070200)
+#define SH2_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000020070280)
+#define SH2_PIO_WRITE_STATUS_2 __IA64_UL_CONST(0x0000000020070300)
+#define SH2_PIO_WRITE_STATUS_3 __IA64_UL_CONST(0x0000000020070380)
/* SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK */
/* Description: Deadlock response detected */
-#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1
-#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK 0x0000000000000002
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK \
+ __IA64_UL_CONST(0x0000000000000002)
/* SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT */
/* Description: Count of currently pending PIO writes */
-#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56
-#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK 0x3f00000000000000
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK \
+ __IA64_UL_CONST(0x3f00000000000000)
/* ==================================================================== */
/* Register "SH_PIO_WRITE_STATUS_0_ALIAS" */
/* ==================================================================== */
-#define SH1_PIO_WRITE_STATUS_0_ALIAS 0x0000000120070208
-#define SH2_PIO_WRITE_STATUS_0_ALIAS 0x0000000020070208
+#define SH1_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000120070208)
+#define SH2_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000020070208)
/* ==================================================================== */
/* Register "SH_EVENT_OCCURRED" */
/* ==================================================================== */
/* SH_EVENT_OCCURRED_UART_INT */
/* Description: Pending Junk Bus UART Interrupt */
-#define SH_EVENT_OCCURRED_UART_INT_SHFT 20
-#define SH_EVENT_OCCURRED_UART_INT_MASK 0x0000000000100000
+#define SH_EVENT_OCCURRED_UART_INT_SHFT 20
+#define SH_EVENT_OCCURRED_UART_INT_MASK __IA64_UL_CONST(0x0000000000100000)
/* SH_EVENT_OCCURRED_IPI_INT */
/* Description: Pending IPI Interrupt */
-#define SH_EVENT_OCCURRED_IPI_INT_SHFT 28
-#define SH_EVENT_OCCURRED_IPI_INT_MASK 0x0000000010000000
+#define SH_EVENT_OCCURRED_IPI_INT_SHFT 28
+#define SH_EVENT_OCCURRED_IPI_INT_MASK __IA64_UL_CONST(0x0000000010000000)
/* SH_EVENT_OCCURRED_II_INT0 */
/* Description: Pending II 0 Interrupt */
-#define SH_EVENT_OCCURRED_II_INT0_SHFT 29
-#define SH_EVENT_OCCURRED_II_INT0_MASK 0x0000000020000000
+#define SH_EVENT_OCCURRED_II_INT0_SHFT 29
+#define SH_EVENT_OCCURRED_II_INT0_MASK __IA64_UL_CONST(0x0000000020000000)
/* SH_EVENT_OCCURRED_II_INT1 */
/* Description: Pending II 1 Interrupt */
-#define SH_EVENT_OCCURRED_II_INT1_SHFT 30
-#define SH_EVENT_OCCURRED_II_INT1_MASK 0x0000000040000000
+#define SH_EVENT_OCCURRED_II_INT1_SHFT 30
+#define SH_EVENT_OCCURRED_II_INT1_MASK __IA64_UL_CONST(0x0000000040000000)
/* SH2_EVENT_OCCURRED_EXTIO_INT2 */
/* Description: Pending SHUB 2 EXT IO INT2 */
-#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT 33
-#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK 0x0000000200000000
+#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT 33
+#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK __IA64_UL_CONST(0x0000000200000000)
/* SH2_EVENT_OCCURRED_EXTIO_INT3 */
/* Description: Pending SHUB 2 EXT IO INT3 */
-#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT 34
-#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK 0x0000000400000000
+#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT 34
+#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK __IA64_UL_CONST(0x0000000400000000)
#define SH_ALL_INT_MASK \
(SH_EVENT_OCCURRED_UART_INT_MASK | SH_EVENT_OCCURRED_IPI_INT_MASK | \
/* ==================================================================== */
/* LEDS */
/* ==================================================================== */
-#define SH1_REAL_JUNK_BUS_LED0 0x7fed00000UL
-#define SH1_REAL_JUNK_BUS_LED1 0x7fed10000UL
-#define SH1_REAL_JUNK_BUS_LED2 0x7fed20000UL
-#define SH1_REAL_JUNK_BUS_LED3 0x7fed30000UL
+#define SH1_REAL_JUNK_BUS_LED0 0x7fed00000UL
+#define SH1_REAL_JUNK_BUS_LED1 0x7fed10000UL
+#define SH1_REAL_JUNK_BUS_LED2 0x7fed20000UL
+#define SH1_REAL_JUNK_BUS_LED3 0x7fed30000UL
-#define SH2_REAL_JUNK_BUS_LED0 0xf0000000UL
-#define SH2_REAL_JUNK_BUS_LED1 0xf0010000UL
-#define SH2_REAL_JUNK_BUS_LED2 0xf0020000UL
-#define SH2_REAL_JUNK_BUS_LED3 0xf0030000UL
+#define SH2_REAL_JUNK_BUS_LED0 0xf0000000UL
+#define SH2_REAL_JUNK_BUS_LED1 0xf0010000UL
+#define SH2_REAL_JUNK_BUS_LED2 0xf0020000UL
+#define SH2_REAL_JUNK_BUS_LED3 0xf0030000UL
/* ==================================================================== */
/* Register "SH1_PTC_0" */
/* Puge Translation Cache Message Configuration Information */
/* ==================================================================== */
-#define SH1_PTC_0 0x00000001101a0000
+#define SH1_PTC_0 __IA64_UL_CONST(0x00000001101a0000)
/* SH1_PTC_0_A */
/* Description: Type */
-#define SH1_PTC_0_A_SHFT 0
+#define SH1_PTC_0_A_SHFT 0
/* SH1_PTC_0_PS */
/* Description: Page Size */
-#define SH1_PTC_0_PS_SHFT 2
+#define SH1_PTC_0_PS_SHFT 2
/* SH1_PTC_0_RID */
/* Description: Region ID */
-#define SH1_PTC_0_RID_SHFT 8
+#define SH1_PTC_0_RID_SHFT 8
/* SH1_PTC_0_START */
/* Description: Start */
-#define SH1_PTC_0_START_SHFT 63
+#define SH1_PTC_0_START_SHFT 63
/* ==================================================================== */
/* Register "SH1_PTC_1" */
/* Puge Translation Cache Message Configuration Information */
/* ==================================================================== */
-#define SH1_PTC_1 0x00000001101a0080
+#define SH1_PTC_1 __IA64_UL_CONST(0x00000001101a0080)
/* SH1_PTC_1_START */
/* Description: PTC_1 Start */
-#define SH1_PTC_1_START_SHFT 63
-
+#define SH1_PTC_1_START_SHFT 63
/* ==================================================================== */
/* Register "SH2_PTC" */
/* Puge Translation Cache Message Configuration Information */
/* ==================================================================== */
-#define SH2_PTC 0x0000000170000000
+#define SH2_PTC __IA64_UL_CONST(0x0000000170000000)
/* SH2_PTC_A */
/* Description: Type */
-#define SH2_PTC_A_SHFT 0
+#define SH2_PTC_A_SHFT 0
/* SH2_PTC_PS */
/* Description: Page Size */
-#define SH2_PTC_PS_SHFT 2
+#define SH2_PTC_PS_SHFT 2
/* SH2_PTC_RID */
/* Description: Region ID */
-#define SH2_PTC_RID_SHFT 4
+#define SH2_PTC_RID_SHFT 4
/* SH2_PTC_START */
/* Description: Start */
-#define SH2_PTC_START_SHFT 63
+#define SH2_PTC_START_SHFT 63
/* SH2_PTC_ADDR_RID */
/* Description: Region ID */
-#define SH2_PTC_ADDR_SHFT 4
-#define SH2_PTC_ADDR_MASK 0x1ffffffffffff000
+#define SH2_PTC_ADDR_SHFT 4
+#define SH2_PTC_ADDR_MASK __IA64_UL_CONST(0x1ffffffffffff000)
/* ==================================================================== */
/* Register "SH_RTC1_INT_CONFIG" */
/* SHub RTC 1 Interrupt Config Registers */
/* ==================================================================== */
-#define SH1_RTC1_INT_CONFIG 0x0000000110001480
-#define SH2_RTC1_INT_CONFIG 0x0000000010001480
-#define SH_RTC1_INT_CONFIG_MASK 0x0ff3ffffffefffff
-#define SH_RTC1_INT_CONFIG_INIT 0x0000000000000000
+#define SH1_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000110001480)
+#define SH2_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000010001480)
+#define SH_RTC1_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff)
+#define SH_RTC1_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000)
/* SH_RTC1_INT_CONFIG_TYPE */
/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
-#define SH_RTC1_INT_CONFIG_TYPE_SHFT 0
-#define SH_RTC1_INT_CONFIG_TYPE_MASK 0x0000000000000007
+#define SH_RTC1_INT_CONFIG_TYPE_SHFT 0
+#define SH_RTC1_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007)
/* SH_RTC1_INT_CONFIG_AGT */
/* Description: Agent, must be 0 for SHub */
-#define SH_RTC1_INT_CONFIG_AGT_SHFT 3
-#define SH_RTC1_INT_CONFIG_AGT_MASK 0x0000000000000008
+#define SH_RTC1_INT_CONFIG_AGT_SHFT 3
+#define SH_RTC1_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008)
/* SH_RTC1_INT_CONFIG_PID */
/* Description: Processor ID, same setting as on targeted McKinley */
-#define SH_RTC1_INT_CONFIG_PID_SHFT 4
-#define SH_RTC1_INT_CONFIG_PID_MASK 0x00000000000ffff0
+#define SH_RTC1_INT_CONFIG_PID_SHFT 4
+#define SH_RTC1_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0)
/* SH_RTC1_INT_CONFIG_BASE */
/* Description: Optional interrupt vector area, 2MB aligned */
-#define SH_RTC1_INT_CONFIG_BASE_SHFT 21
-#define SH_RTC1_INT_CONFIG_BASE_MASK 0x0003ffffffe00000
+#define SH_RTC1_INT_CONFIG_BASE_SHFT 21
+#define SH_RTC1_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000)
/* SH_RTC1_INT_CONFIG_IDX */
/* Description: Targeted McKinley interrupt vector */
-#define SH_RTC1_INT_CONFIG_IDX_SHFT 52
-#define SH_RTC1_INT_CONFIG_IDX_MASK 0x0ff0000000000000
+#define SH_RTC1_INT_CONFIG_IDX_SHFT 52
+#define SH_RTC1_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000)
/* ==================================================================== */
/* Register "SH_RTC1_INT_ENABLE" */
/* SHub RTC 1 Interrupt Enable Registers */
/* ==================================================================== */
-#define SH1_RTC1_INT_ENABLE 0x0000000110001500
-#define SH2_RTC1_INT_ENABLE 0x0000000010001500
-#define SH_RTC1_INT_ENABLE_MASK 0x0000000000000001
-#define SH_RTC1_INT_ENABLE_INIT 0x0000000000000000
+#define SH1_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000110001500)
+#define SH2_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000010001500)
+#define SH_RTC1_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001)
+#define SH_RTC1_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000)
/* SH_RTC1_INT_ENABLE_RTC1_ENABLE */
/* Description: Enable RTC 1 Interrupt */
-#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT 0
-#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK 0x0000000000000001
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT 0
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK \
+ __IA64_UL_CONST(0x0000000000000001)
/* ==================================================================== */
/* Register "SH_RTC2_INT_CONFIG" */
/* SHub RTC 2 Interrupt Config Registers */
/* ==================================================================== */
-#define SH1_RTC2_INT_CONFIG 0x0000000110001580
-#define SH2_RTC2_INT_CONFIG 0x0000000010001580
-#define SH_RTC2_INT_CONFIG_MASK 0x0ff3ffffffefffff
-#define SH_RTC2_INT_CONFIG_INIT 0x0000000000000000
+#define SH1_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000110001580)
+#define SH2_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000010001580)
+#define SH_RTC2_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff)
+#define SH_RTC2_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000)
/* SH_RTC2_INT_CONFIG_TYPE */
/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
-#define SH_RTC2_INT_CONFIG_TYPE_SHFT 0
-#define SH_RTC2_INT_CONFIG_TYPE_MASK 0x0000000000000007
+#define SH_RTC2_INT_CONFIG_TYPE_SHFT 0
+#define SH_RTC2_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007)
/* SH_RTC2_INT_CONFIG_AGT */
/* Description: Agent, must be 0 for SHub */
-#define SH_RTC2_INT_CONFIG_AGT_SHFT 3
-#define SH_RTC2_INT_CONFIG_AGT_MASK 0x0000000000000008
+#define SH_RTC2_INT_CONFIG_AGT_SHFT 3
+#define SH_RTC2_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008)
/* SH_RTC2_INT_CONFIG_PID */
/* Description: Processor ID, same setting as on targeted McKinley */
-#define SH_RTC2_INT_CONFIG_PID_SHFT 4
-#define SH_RTC2_INT_CONFIG_PID_MASK 0x00000000000ffff0
+#define SH_RTC2_INT_CONFIG_PID_SHFT 4
+#define SH_RTC2_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0)
/* SH_RTC2_INT_CONFIG_BASE */
/* Description: Optional interrupt vector area, 2MB aligned */
-#define SH_RTC2_INT_CONFIG_BASE_SHFT 21
-#define SH_RTC2_INT_CONFIG_BASE_MASK 0x0003ffffffe00000
+#define SH_RTC2_INT_CONFIG_BASE_SHFT 21
+#define SH_RTC2_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000)
/* SH_RTC2_INT_CONFIG_IDX */
/* Description: Targeted McKinley interrupt vector */
-#define SH_RTC2_INT_CONFIG_IDX_SHFT 52
-#define SH_RTC2_INT_CONFIG_IDX_MASK 0x0ff0000000000000
+#define SH_RTC2_INT_CONFIG_IDX_SHFT 52
+#define SH_RTC2_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000)
/* ==================================================================== */
/* Register "SH_RTC2_INT_ENABLE" */
/* SHub RTC 2 Interrupt Enable Registers */
/* ==================================================================== */
-#define SH1_RTC2_INT_ENABLE 0x0000000110001600
-#define SH2_RTC2_INT_ENABLE 0x0000000010001600
-#define SH_RTC2_INT_ENABLE_MASK 0x0000000000000001
-#define SH_RTC2_INT_ENABLE_INIT 0x0000000000000000
+#define SH1_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000110001600)
+#define SH2_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000010001600)
+#define SH_RTC2_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001)
+#define SH_RTC2_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000)
/* SH_RTC2_INT_ENABLE_RTC2_ENABLE */
/* Description: Enable RTC 2 Interrupt */
-#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT 0
-#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK 0x0000000000000001
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT 0
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK \
+ __IA64_UL_CONST(0x0000000000000001)
/* ==================================================================== */
/* Register "SH_RTC3_INT_CONFIG" */
/* SHub RTC 3 Interrupt Config Registers */
/* ==================================================================== */
-#define SH1_RTC3_INT_CONFIG 0x0000000110001680
-#define SH2_RTC3_INT_CONFIG 0x0000000010001680
-#define SH_RTC3_INT_CONFIG_MASK 0x0ff3ffffffefffff
-#define SH_RTC3_INT_CONFIG_INIT 0x0000000000000000
+#define SH1_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000110001680)
+#define SH2_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000010001680)
+#define SH_RTC3_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff)
+#define SH_RTC3_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000)
/* SH_RTC3_INT_CONFIG_TYPE */
/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
-#define SH_RTC3_INT_CONFIG_TYPE_SHFT 0
-#define SH_RTC3_INT_CONFIG_TYPE_MASK 0x0000000000000007
+#define SH_RTC3_INT_CONFIG_TYPE_SHFT 0
+#define SH_RTC3_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007)
/* SH_RTC3_INT_CONFIG_AGT */
/* Description: Agent, must be 0 for SHub */
-#define SH_RTC3_INT_CONFIG_AGT_SHFT 3
-#define SH_RTC3_INT_CONFIG_AGT_MASK 0x0000000000000008
+#define SH_RTC3_INT_CONFIG_AGT_SHFT 3
+#define SH_RTC3_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008)
/* SH_RTC3_INT_CONFIG_PID */
/* Description: Processor ID, same setting as on targeted McKinley */
-#define SH_RTC3_INT_CONFIG_PID_SHFT 4
-#define SH_RTC3_INT_CONFIG_PID_MASK 0x00000000000ffff0
+#define SH_RTC3_INT_CONFIG_PID_SHFT 4
+#define SH_RTC3_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0)
/* SH_RTC3_INT_CONFIG_BASE */
/* Description: Optional interrupt vector area, 2MB aligned */
-#define SH_RTC3_INT_CONFIG_BASE_SHFT 21
-#define SH_RTC3_INT_CONFIG_BASE_MASK 0x0003ffffffe00000
+#define SH_RTC3_INT_CONFIG_BASE_SHFT 21
+#define SH_RTC3_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000)
/* SH_RTC3_INT_CONFIG_IDX */
/* Description: Targeted McKinley interrupt vector */
-#define SH_RTC3_INT_CONFIG_IDX_SHFT 52
-#define SH_RTC3_INT_CONFIG_IDX_MASK 0x0ff0000000000000
+#define SH_RTC3_INT_CONFIG_IDX_SHFT 52
+#define SH_RTC3_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000)
/* ==================================================================== */
/* Register "SH_RTC3_INT_ENABLE" */
/* SHub RTC 3 Interrupt Enable Registers */
/* ==================================================================== */
-#define SH1_RTC3_INT_ENABLE 0x0000000110001700
-#define SH2_RTC3_INT_ENABLE 0x0000000010001700
-#define SH_RTC3_INT_ENABLE_MASK 0x0000000000000001
-#define SH_RTC3_INT_ENABLE_INIT 0x0000000000000000
+#define SH1_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000110001700)
+#define SH2_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000010001700)
+#define SH_RTC3_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001)
+#define SH_RTC3_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000)
/* SH_RTC3_INT_ENABLE_RTC3_ENABLE */
/* Description: Enable RTC 3 Interrupt */
-#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT 0
-#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK 0x0000000000000001
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT 0
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK \
+ __IA64_UL_CONST(0x0000000000000001)
/* SH_EVENT_OCCURRED_RTC1_INT */
/* Description: Pending RTC 1 Interrupt */
-#define SH_EVENT_OCCURRED_RTC1_INT_SHFT 24
-#define SH_EVENT_OCCURRED_RTC1_INT_MASK 0x0000000001000000
+#define SH_EVENT_OCCURRED_RTC1_INT_SHFT 24
+#define SH_EVENT_OCCURRED_RTC1_INT_MASK __IA64_UL_CONST(0x0000000001000000)
/* SH_EVENT_OCCURRED_RTC2_INT */
/* Description: Pending RTC 2 Interrupt */
-#define SH_EVENT_OCCURRED_RTC2_INT_SHFT 25
-#define SH_EVENT_OCCURRED_RTC2_INT_MASK 0x0000000002000000
+#define SH_EVENT_OCCURRED_RTC2_INT_SHFT 25
+#define SH_EVENT_OCCURRED_RTC2_INT_MASK __IA64_UL_CONST(0x0000000002000000)
/* SH_EVENT_OCCURRED_RTC3_INT */
/* Description: Pending RTC 3 Interrupt */
-#define SH_EVENT_OCCURRED_RTC3_INT_SHFT 26
-#define SH_EVENT_OCCURRED_RTC3_INT_MASK 0x0000000004000000
+#define SH_EVENT_OCCURRED_RTC3_INT_SHFT 26
+#define SH_EVENT_OCCURRED_RTC3_INT_MASK __IA64_UL_CONST(0x0000000004000000)
/* ==================================================================== */
/* Register "SH_IPI_ACCESS" */
/* CPU interrupt Access Permission Bits */
/* ==================================================================== */
-#define SH1_IPI_ACCESS 0x0000000110060480
-#define SH2_IPI_ACCESS0 0x0000000010060c00
-#define SH2_IPI_ACCESS1 0x0000000010060c80
-#define SH2_IPI_ACCESS2 0x0000000010060d00
-#define SH2_IPI_ACCESS3 0x0000000010060d80
+#define SH1_IPI_ACCESS __IA64_UL_CONST(0x0000000110060480)
+#define SH2_IPI_ACCESS0 __IA64_UL_CONST(0x0000000010060c00)
+#define SH2_IPI_ACCESS1 __IA64_UL_CONST(0x0000000010060c80)
+#define SH2_IPI_ACCESS2 __IA64_UL_CONST(0x0000000010060d00)
+#define SH2_IPI_ACCESS3 __IA64_UL_CONST(0x0000000010060d80)
/* ==================================================================== */
/* Register "SH_INT_CMPB" */
/* RTC Compare Value for Processor B */
/* ==================================================================== */
-#define SH1_INT_CMPB 0x00000001101b0080
-#define SH2_INT_CMPB 0x00000000101b0080
-#define SH_INT_CMPB_MASK 0x007fffffffffffff
-#define SH_INT_CMPB_INIT 0x0000000000000000
+#define SH1_INT_CMPB __IA64_UL_CONST(0x00000001101b0080)
+#define SH2_INT_CMPB __IA64_UL_CONST(0x00000000101b0080)
+#define SH_INT_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff)
+#define SH_INT_CMPB_INIT __IA64_UL_CONST(0x0000000000000000)
/* SH_INT_CMPB_REAL_TIME_CMPB */
/* Description: Real Time Clock Compare */
-#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
-#define SH_INT_CMPB_REAL_TIME_CMPB_MASK 0x007fffffffffffff
+#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
+#define SH_INT_CMPB_REAL_TIME_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff)
/* ==================================================================== */
/* Register "SH_INT_CMPC" */
/* RTC Compare Value for Processor C */
/* ==================================================================== */
-#define SH1_INT_CMPC 0x00000001101b0100
-#define SH2_INT_CMPC 0x00000000101b0100
-#define SH_INT_CMPC_MASK 0x007fffffffffffff
-#define SH_INT_CMPC_INIT 0x0000000000000000
+#define SH1_INT_CMPC __IA64_UL_CONST(0x00000001101b0100)
+#define SH2_INT_CMPC __IA64_UL_CONST(0x00000000101b0100)
+#define SH_INT_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff)
+#define SH_INT_CMPC_INIT __IA64_UL_CONST(0x0000000000000000)
/* SH_INT_CMPC_REAL_TIME_CMPC */
/* Description: Real Time Clock Compare */
-#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
-#define SH_INT_CMPC_REAL_TIME_CMPC_MASK 0x007fffffffffffff
+#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
+#define SH_INT_CMPC_REAL_TIME_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff)
/* ==================================================================== */
/* Register "SH_INT_CMPD" */
/* RTC Compare Value for Processor D */
/* ==================================================================== */
-#define SH1_INT_CMPD 0x00000001101b0180
-#define SH2_INT_CMPD 0x00000000101b0180
-#define SH_INT_CMPD_MASK 0x007fffffffffffff
-#define SH_INT_CMPD_INIT 0x0000000000000000
+#define SH1_INT_CMPD __IA64_UL_CONST(0x00000001101b0180)
+#define SH2_INT_CMPD __IA64_UL_CONST(0x00000000101b0180)
+#define SH_INT_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff)
+#define SH_INT_CMPD_INIT __IA64_UL_CONST(0x0000000000000000)
/* SH_INT_CMPD_REAL_TIME_CMPD */
/* Description: Real Time Clock Compare */
-#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
-#define SH_INT_CMPD_REAL_TIME_CMPD_MASK 0x007fffffffffffff
+#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
+#define SH_INT_CMPD_REAL_TIME_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff)
/* ==================================================================== */
/* Register "SH_MD_DQLP_MMR_DIR_PRIVEC0" */
/* privilege vector for acc=0 */
/* ==================================================================== */
-
-#define SH1_MD_DQLP_MMR_DIR_PRIVEC0 0x0000000100030300
+#define SH1_MD_DQLP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100030300)
/* ==================================================================== */
/* Register "SH_MD_DQRP_MMR_DIR_PRIVEC0" */
/* privilege vector for acc=0 */
/* ==================================================================== */
-
-#define SH1_MD_DQRP_MMR_DIR_PRIVEC0 0x0000000100050300
+#define SH1_MD_DQRP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100050300)
/* ==================================================================== */
/* Some MMRs are functionally identical (or close enough) on both SHUB1 */
/* Engine 0 Control and Status Register */
/* ========================================================================== */
-#define SH2_BT_ENG_CSR_0 0x0000000030040000
-#define SH2_BT_ENG_SRC_ADDR_0 0x0000000030040080
-#define SH2_BT_ENG_DEST_ADDR_0 0x0000000030040100
-#define SH2_BT_ENG_NOTIF_ADDR_0 0x0000000030040180
+#define SH2_BT_ENG_CSR_0 __IA64_UL_CONST(0x0000000030040000)
+#define SH2_BT_ENG_SRC_ADDR_0 __IA64_UL_CONST(0x0000000030040080)
+#define SH2_BT_ENG_DEST_ADDR_0 __IA64_UL_CONST(0x0000000030040100)
+#define SH2_BT_ENG_NOTIF_ADDR_0 __IA64_UL_CONST(0x0000000030040180)
/* ========================================================================== */
/* BTE interfaces 1-3 */
/* ========================================================================== */
-#define SH2_BT_ENG_CSR_1 0x0000000030050000
-#define SH2_BT_ENG_CSR_2 0x0000000030060000
-#define SH2_BT_ENG_CSR_3 0x0000000030070000
+#define SH2_BT_ENG_CSR_1 __IA64_UL_CONST(0x0000000030050000)
+#define SH2_BT_ENG_CSR_2 __IA64_UL_CONST(0x0000000030060000)
+#define SH2_BT_ENG_CSR_3 __IA64_UL_CONST(0x0000000030070000)
#endif /* _ASM_IA64_SN_SHUB_MMR_H */
projects / linux-2.6 / commitdiff