return err;
}
-/* Write a block of data to the chip's buffer with padding if
- * neccessary, via the BAP. Synchronization/serialization is the
- * caller's problem.
- *
- * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
- */
-int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, int len,
- u16 id, u16 offset)
-{
- int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
- int err = 0;
-
- if (len < 0 || data_len > len)
- return -EINVAL;
-
- err = hermes_bap_seek(hw, bap, id, offset);
- if (err)
- goto out;
-
- /* Transfer all the complete words of data */
- hermes_write_bytes(hw, dreg, buf, data_len);
- /* If there is an odd byte left over pad and transfer it */
- if (data_len & 1) {
- u8 end[2];
- end[1] = 0;
- end[0] = ((unsigned char *)buf)[data_len - 1];
- hermes_write_bytes(hw, dreg, end, 2);
- data_len ++;
- }
- /* Now send zeros for the padding */
- if (data_len < len)
- hermes_clear_words(hw, dreg, (len - data_len) / 2);
- /* Complete */
- out:
- return err;
-}
-
/* Read a Length-Type-Value record from the card.
*
* If length is NULL, we ignore the length read from the card, and
EXPORT_SYMBOL(hermes_bap_pread);
EXPORT_SYMBOL(hermes_bap_pwrite);
-EXPORT_SYMBOL(hermes_bap_pwrite_pad);
EXPORT_SYMBOL(hermes_read_ltv);
EXPORT_SYMBOL(hermes_write_ltv);
u16 id, u16 offset);
int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
u16 id, u16 offset);
-int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf,
- unsigned data_len, int len, u16 id, u16 offset);
int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
u16 *length, void *buf);
int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
u16 txfid = priv->txfid;
char *p;
struct ethhdr *eh;
- int len, data_len, data_off;
+ int data_len, data_off;
struct hermes_tx_descriptor desc;
unsigned long flags;
return NETDEV_TX_OK;
}
- /* Length of the packet body */
- /* FIXME: what if the skb is smaller than this? */
- len = max_t(int, ALIGN(skb->len, 2), ETH_ZLEN);
- skb = skb_padto(skb, len);
- if (skb == NULL)
+ /* Check packet length */
+ data_len = skb->len;
+ if (data_len < ETH_HLEN)
goto fail;
- len -= ETH_HLEN;
eh = (struct ethhdr *)skb->data;
/* Encapsulate Ethernet-II frames */
if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
struct header_struct hdr;
- data_len = len;
+ data_len = skb->len - ETH_HLEN;
data_off = HERMES_802_3_OFFSET + sizeof(hdr);
p = skb->data + ETH_HLEN;
stats->tx_errors++;
goto fail;
}
- /* Actual xfer length - allow for padding */
- len = ALIGN(data_len, 2);
- if (len < ETH_ZLEN - ETH_HLEN)
- len = ETH_ZLEN - ETH_HLEN;
} else { /* IEEE 802.3 frame */
- data_len = len + ETH_HLEN;
+ data_len = skb->len;
data_off = HERMES_802_3_OFFSET;
p = skb->data;
- /* Actual xfer length - round up for odd length packets */
- len = ALIGN(data_len, 2);
- if (len < ETH_ZLEN)
- len = ETH_ZLEN;
}
- err = hermes_bap_pwrite_pad(hw, USER_BAP, p, data_len, len,
+ err = hermes_bap_pwrite(hw, USER_BAP, p, data_len,
txfid, data_off);
if (err) {
printk(KERN_ERR "%s: Error %d writing packet to BAP\n",