[POWERPC] mpc5200: add CM5200 DTS

Add device tree source file for CM5200 board.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
new file mode 100644 (file)
index 0000000..9295083
--- /dev/null
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -0,0 +1,236 @@
+/*
+ * CM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+       model = "schindler,cm5200";
+       compatible = "schindler,cm5200";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,5200@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <20>;
+                       i-cache-line-size = <20>;
+                       d-cache-size = <4000>;          // L1, 16K
+                       i-cache-size = <4000>;          // L1, 16K
+                       timebase-frequency = <0>;       // from bootloader
+                       bus-frequency = <0>;            // from bootloader
+                       clock-frequency = <0>;          // from bootloader
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <00000000 04000000>;      // 64MB
+       };
+
+       soc5200@f0000000 {
+               model = "fsl,mpc5200b";
+               compatible = "fsl,mpc5200b";
+               revision = "";                  // from bootloader
+               device_type = "soc";
+               ranges = <0 f0000000 0000c000>;
+               reg = <f0000000 00000100>;
+               bus-frequency = <0>;            // from bootloader
+               system-frequency = <0>;         // from bootloader
+
+               cdm@200 {
+                       compatible = "mpc5200b-cdm","mpc5200-cdm";
+                       reg = <200 38>;
+               };
+
+               mpc5200_pic: pic@500 {
+                       // 5200 interrupts are encoded into two levels;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       compatible = "mpc5200b-pic","mpc5200-pic";
+                       reg = <500 80>;
+               };
+
+               gpt@600 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <600 10>;
+                       interrupts = <1 9 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+                       fsl,has-wdt;
+               };
+
+               gpt@610 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <610 10>;
+                       interrupts = <1 a 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@620 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <620 10>;
+                       interrupts = <1 b 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@630 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <630 10>;
+                       interrupts = <1 c 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@640 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <640 10>;
+                       interrupts = <1 d 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@650 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <650 10>;
+                       interrupts = <1 e 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@660 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <660 10>;
+                       interrupts = <1 f 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpt@670 {       // General Purpose Timer
+                       compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                       reg = <670 10>;
+                       interrupts = <1 10 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               rtc@800 {       // Real time clock
+                       compatible = "mpc5200b-rtc","mpc5200-rtc";
+                       reg = <800 100>;
+                       interrupts = <1 5 0 1 6 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpio@b00 {
+                       compatible = "mpc5200b-gpio","mpc5200-gpio";
+                       reg = <b00 40>;
+                       interrupts = <1 7 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               gpio-wkup@c00 {
+                       compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
+                       reg = <c00 40>;
+                       interrupts = <1 8 0 0 3 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               spi@f00 {
+                       compatible = "mpc5200b-spi","mpc5200-spi";
+                       reg = <f00 20>;
+                       interrupts = <2 d 0 2 e 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               usb@1000 {
+                       device_type = "usb-ohci-be";
+                       compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
+                       reg = <1000 ff>;
+                       interrupts = <2 6 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               dma-controller@1200 {
+                       compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
+                       reg = <1200 80>;
+                       interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+                                     3 4 0  3 5 0  3 6 0  3 7 0
+                                     3 8 0  3 9 0  3 a 0  3 b 0
+                                     3 c 0  3 d 0  3 e 0  3 f 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               xlb@1f00 {
+                       compatible = "mpc5200b-xlb","mpc5200-xlb";
+                       reg = <1f00 100>;
+               };
+
+               serial@2000 {           // PSC1
+                       device_type = "serial";
+                       compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+                       port-number = <0>;  // Logical port assignment
+                       reg = <2000 100>;
+                       interrupts = <2 1 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               serial@2200 {           // PSC2
+                       device_type = "serial";
+                       compatible = "mpc5200-psc-uart";
+                       port-number = <1>;  // Logical port assignment
+                       reg = <2200 100>;
+                       interrupts = <2 2 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               serial@2400 {           // PSC3
+                       device_type = "serial";
+                       compatible = "mpc5200-psc-uart";
+                       port-number = <2>;  // Logical port assignment
+                       reg = <2400 100>;
+                       interrupts = <2 3 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               serial@2c00 {           // PSC6
+                       device_type = "serial";
+                       compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+                       port-number = <5>;  // Logical port assignment
+                       reg = <2c00 100>;
+                       interrupts = <2 4 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               ethernet@3000 {
+                       device_type = "network";
+                       compatible = "mpc5200b-fec","mpc5200-fec";
+                       reg = <3000 800>;
+                       local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+                       interrupts = <2 5 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+               };
+
+               i2c@3d40 {
+                       compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
+                       reg = <3d40 40>;
+                       interrupts = <2 10 0>;
+                       interrupt-parent = <&mpc5200_pic>;
+                       fsl5200-clocking;
+               };
+
+               sram@8000 {
+                       compatible = "mpc5200b-sram","mpc5200-sram";
+                       reg = <8000 4000>;
+               };
+       };
+};