]> err.no Git - linux-2.6/commitdiff
phylib: add RGMII-ID mode to the Marvell m88e1111 PHY to fix broken ucc_geth
authorKim Phillips <kim.phillips@freescale.com>
Tue, 5 Jun 2007 10:46:47 +0000 (18:46 +0800)
committerJeff Garzik <jeff@garzik.org>
Sat, 9 Jun 2007 22:25:35 +0000 (18:25 -0400)
Support for configuring RGMII-ID (RGMII with internal delay) mode on the
88e1111 and 88e1145.  Ucc_geth on MPC8360EMDS(the main user of ucc_geth)
is broken after changed to use phylib.  It is fixed by adding this
internal delay.

Also renamed 88e1111s -> 88e1111 (no references to an 88e1111s part were
found), and fixed some whitespace.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/phy/marvell.c

index 22aec5cce68310ab6e4128b2ec30435fcff5c375..b87f8d2a888bb409af90e36a99662c2310ad54d3 100644 (file)
 #define MII_M1111_PHY_LED_CONTROL      0x18
 #define MII_M1111_PHY_LED_DIRECT       0x4100
 #define MII_M1111_PHY_LED_COMBINE      0x411c
+#define MII_M1111_PHY_EXT_CR           0x14
+#define MII_M1111_RX_DELAY             0x80
+#define MII_M1111_TX_DELAY             0x2
+#define MII_M1111_PHY_EXT_SR           0x1b
+#define MII_M1111_HWCFG_MODE_MASK      0xf
+#define MII_M1111_HWCFG_MODE_RGMII     0xb
 
 MODULE_DESCRIPTION("Marvell PHY driver");
 MODULE_AUTHOR("Andy Fleming");
@@ -131,6 +137,45 @@ static int marvell_config_aneg(struct phy_device *phydev)
        return err;
 }
 
+static int m88e1111_config_init(struct phy_device *phydev)
+{
+       int err;
+
+       if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+           (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)) {
+               int temp;
+
+               if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+                       temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+                       if (temp < 0)
+                               return temp;
+
+                       temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+
+                       err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
+                       if (err < 0)
+                               return err;
+               }
+
+               temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+               if (temp < 0)
+                       return temp;
+
+               temp &= ~(MII_M1111_HWCFG_MODE_MASK);
+               temp |= MII_M1111_HWCFG_MODE_RGMII;
+
+               err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+               if (err < 0)
+                       return err;
+       }
+
+       err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+       if (err < 0)
+               return err;
+
+       return 0;
+}
+
 static int m88e1145_config_init(struct phy_device *phydev)
 {
        int err;
@@ -152,7 +197,7 @@ static int m88e1145_config_init(struct phy_device *phydev)
        if (err < 0)
                return err;
 
-       if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
                int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
                if (temp < 0)
                        return temp;
@@ -206,7 +251,7 @@ static struct phy_driver m88e1101_driver = {
        .driver = {.owner = THIS_MODULE,},
 };
 
-static struct phy_driver m88e1111s_driver = {
+static struct phy_driver m88e1111_driver = {
        .phy_id = 0x01410cc0,
        .phy_id_mask = 0xfffffff0,
        .name = "Marvell 88E1111",
@@ -216,6 +261,7 @@ static struct phy_driver m88e1111s_driver = {
        .read_status = &genphy_read_status,
        .ack_interrupt = &marvell_ack_interrupt,
        .config_intr = &marvell_config_intr,
+       .config_init = &m88e1111_config_init,
        .driver = {.owner = THIS_MODULE,},
 };
 
@@ -241,9 +287,9 @@ static int __init marvell_init(void)
        if (ret)
                return ret;
 
-       ret = phy_driver_register(&m88e1111s_driver);
+       ret = phy_driver_register(&m88e1111_driver);
        if (ret)
-               goto err1111s;
+               goto err1111;
 
        ret = phy_driver_register(&m88e1145_driver);
        if (ret)
@@ -251,9 +297,9 @@ static int __init marvell_init(void)
 
        return 0;
 
-      err1145:
-       phy_driver_unregister(&m88e1111s_driver);
-      err1111s:
+err1145:
+       phy_driver_unregister(&m88e1111_driver);
+err1111:
        phy_driver_unregister(&m88e1101_driver);
        return ret;
 }
@@ -261,7 +307,7 @@ static int __init marvell_init(void)
 static void __exit marvell_exit(void)
 {
        phy_driver_unregister(&m88e1101_driver);
-       phy_driver_unregister(&m88e1111s_driver);
+       phy_driver_unregister(&m88e1111_driver);
        phy_driver_unregister(&m88e1145_driver);
 }