#define PCIID_VENDOR_INTEL 0x8086
#define PCIID_VENDOR_ALI 0x10b9
static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
+ /*
+ * Subsystems needing entries:
+ * 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family
+ * 0x10b9:0x1533 0x0e11:0x005a Compaq nc4000 family
+ * 0x8086:0x24cc 0x0e11:0x002a HP nx9000 family
+ */
+ {
+ /* Guessed entry */
+ .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
+ .device = 0x24cc,
+ .subvendor = 0x103c,
+ .subdevice = 0x08bc,
+ .sir_io = 0x02f8,
+ .fir_io = 0x0130,
+ .fir_irq = 0x05,
+ .fir_dma = 0x03,
+ .cfg_base = 0x004e,
+ .preconfigure = preconfigure_through_82801,
+ .name = "HP nx5000 family",
+ },
{
.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
.device = 0x24cc,
.fir_dma = 0x03,
.cfg_base = 0x004e,
.preconfigure = preconfigure_through_82801,
- .name = "HP nc8000",
+ .name = "HP nc8000 family",
},
{
.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
.fir_dma = 0x03,
.cfg_base = 0x004e,
.preconfigure = preconfigure_through_82801,
- .name = "HP nc6000",
+ .name = "HP nc6000 family",
+ },
+ {
+ .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
+ .device = 0x24cc,
+ .subvendor = 0x0e11,
+ .subdevice = 0x0860,
+ /* I assume these are the same for x1000 as for the others */
+ .sir_io = 0x02e8,
+ .fir_io = 0x02f8,
+ .fir_irq = 0x07,
+ .fir_dma = 0x03,
+ .cfg_base = 0x002e,
+ .preconfigure = preconfigure_through_82801,
+ .name = "Compaq x1000 family",
},
{
/* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */